- 04 Aug, 2019 17 commits
-
-
Dmitry Safonov authored
commit effa4678 upstream. Intel VT-d driver was reworked to use common deferred flushing implementation. Previously there was one global per-cpu flush queue, afterwards - one per domain. Before deferring a flush, the queue should be allocated and initialized. Currently only domains with IOMMU_DOMAIN_DMA type initialize their flush queue. It's probably worth to init it for static or unmanaged domains too, but it may be arguable - I'm leaving it to iommu folks. Prevent queuing an iova flush if the domain doesn't have a queue. The defensive check seems to be worth to keep even if queue would be initialized for all kinds of domains. And is easy backportable. On 4.19.43 stable kernel it has a user-visible effect: previously for devices in si domain there were crashes, on sata devices: BUG: spinlock bad magic on CPU#6, swapper/0/1 lock: 0xffff88844f582008, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 CPU: 6 PID: 1 Comm: swapper/0 Not tainted 4.19.43 #1 Call Trace: <IRQ> dump_stack+0x61/0x7e spin_bug+0x9d/0xa3 do_raw_spin_lock+0x22/0x8e _raw_spin_lock_irqsave+0x32/0x3a queue_iova+0x45/0x115 intel_unmap+0x107/0x113 intel_unmap_sg+0x6b/0x76 __ata_qc_complete+0x7f/0x103 ata_qc_complete+0x9b/0x26a ata_qc_complete_multiple+0xd0/0xe3 ahci_handle_port_interrupt+0x3ee/0x48a ahci_handle_port_intr+0x73/0xa9 ahci_single_level_irq_intr+0x40/0x60 __handle_irq_event_percpu+0x7f/0x19a handle_irq_event_percpu+0x32/0x72 handle_irq_event+0x38/0x56 handle_edge_irq+0x102/0x121 handle_irq+0x147/0x15c do_IRQ+0x66/0xf2 common_interrupt+0xf/0xf RIP: 0010:__do_softirq+0x8c/0x2df The same for usb devices that use ehci-pci: BUG: spinlock bad magic on CPU#0, swapper/0/1 lock: 0xffff88844f402008, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.43 #4 Call Trace: <IRQ> dump_stack+0x61/0x7e spin_bug+0x9d/0xa3 do_raw_spin_lock+0x22/0x8e _raw_spin_lock_irqsave+0x32/0x3a queue_iova+0x77/0x145 intel_unmap+0x107/0x113 intel_unmap_page+0xe/0x10 usb_hcd_unmap_urb_setup_for_dma+0x53/0x9d usb_hcd_unmap_urb_for_dma+0x17/0x100 unmap_urb_for_dma+0x22/0x24 __usb_hcd_giveback_urb+0x51/0xc3 usb_giveback_urb_bh+0x97/0xde tasklet_action_common.isra.4+0x5f/0xa1 tasklet_action+0x2d/0x30 __do_softirq+0x138/0x2df irq_exit+0x7d/0x8b smp_apic_timer_interrupt+0x10f/0x151 apic_timer_interrupt+0xf/0x20 </IRQ> RIP: 0010:_raw_spin_unlock_irqrestore+0x17/0x39 Cc: David Woodhouse <dwmw2@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: iommu@lists.linux-foundation.org Cc: <stable@vger.kernel.org> # 4.14+ Fixes: 13cf0174 ("iommu/vt-d: Make use of iova deferred flushing") Signed-off-by:
Dmitry Safonov <dima@arista.com> Reviewed-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> [v4.14-port notes: o minor conflict with untrusted IOMMU devices check under if-condition] Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Luke Nowakowski-Krijger authored
commit c666355e upstream. Change devm_k*alloc to k*alloc to manually allocate memory The manual allocation and freeing of memory is necessary because when the USB radio is disconnected, the memory associated with devm_k*alloc is freed. Meaning if we still have unresolved references to the radio device, then we get use-after-free errors. This patch fixes this by manually allocating memory, and freeing it in the v4l2.release callback that gets called when the last radio device exits. Reported-and-tested-by: syzbot+a4387f5b6b799f6becbf@syzkaller.appspotmail.com Signed-off-by:
Luke Nowakowski-Krijger <lnowakow@eng.ucsd.edu> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> [hverkuil-cisco@xs4all.nl: cleaned up two small checkpatch.pl warnings] [hverkuil-cisco@xs4all.nl: prefix subject with driver name] Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Benjamin Coddington authored
commit 9f7761cf upstream. Don't bail out before cleaning up a new allocation if the wait for searching for a matching nfs client is interrupted. Memory leaks. Reported-by: syzbot+7fe11b49c1cc30e3fce2@syzkaller.appspotmail.com Fixes: 950a578c ("NFS: make nfs_match_client killable") Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Andrey Konovalov authored
commit 1753c7c4 upstream. When the pvrusb2 driver detects that there's something wrong with the device, it prints a warning message. Right now those message are printed in two different formats: 1. ***WARNING*** message here 2. WARNING: message here There's an issue with the second format. Syzkaller recognizes it as a message produced by a WARN_ON(), which is used to indicate a bug in the kernel. However pvrusb2 prints those warnings to indicate an issue with the device, not the bug in the kernel. This patch changes the pvrusb2 driver to consistently use the first warning message format. This will unblock syzkaller testing of this driver. Reported-by: syzbot+af8f8d2ac0d39b0ed3a0@syzkaller.appspotmail.com Reported-by: syzbot+170a86bf206dd2c6217e@syzkaller.appspotmail.com Signed-off-by:
Andrey Konovalov <andreyknvl@google.com> Reviewed-by:
-
Oliver Neukum authored
commit eff73de2 upstream. Kasan reported a use after free in cpia2_usb_disconnect() It first freed everything and then woke up those waiting. The reverse order is correct. Fixes: 6c493f8b ("[media] cpia2: major overhaul to get it in a working state again") Signed-off-by:
Oliver Neukum <oneukum@suse.com> Reported-by: syzbot+0c90fc937c84f97d0aa6@syzkaller.appspotmail.com Signed-off-by:
-
Fabio Estevam authored
commit 265df32e upstream. The "WARNING" string confuses syzbot, which thinks it found a crash [1]. Change the string to avoid such problem. [1] https://lkml.org/lkml/2019/5/9/243 Reported-by: syzbot+c1b25598aa60dcd47e78@syzkaller.appspotmail.com Suggested-by:
Fabio Estevam <festevam@gmail.com> Reviewed-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Sean Young authored
commit 6d0d1ff9 upstream. au0828_usb_disconnect() gets the au0828_dev struct via usb_get_intfdata, so it needs to set up for the error paths. Reported-by: syzbot+357d86bcb4cca1a2f572@syzkaller.appspotmail.com Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Phong Tran authored
commit f384e62a upstream. The syzbot test with random endpoint address which made the idx is overflow in the table of endpoint configuations. this adds the checking for fixing the error report from syzbot KASAN: stack-out-of-bounds Read in hfcsusb_probe [1] The patch tested by syzbot [2] Reported-by: syzbot+8750abbc3a46ef47d509@syzkaller.appspotmail.com [1]: https://syzkaller.appspot.com/bug?id=30a04378dac680c5d521304a00a86156bb913522 [2]: https://groups.google.com/d/msg/syzkaller-bugs/_6HBdge8F3E/OJn7wVNpBAAJSigned-off-by:
Phong Tran <tranmanphong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Todd Kjos authored
commit a370003c upstream. There is a race between the binder driver cleaning up a completed transaction via binder_free_transaction() and a user calling binder_ioctl(BC_FREE_BUFFER) to release a buffer. It doesn't matter which is first but they need to be protected against running concurrently which can result in a UAF. Signed-off-by:
Todd Kjos <tkjos@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Will Deacon authored
commit 24951465 upstream. arch/arm/ defines a SIGMINSTKSZ of 2k, so we should use the same value for compat tasks. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Reviewed-by:
Dave Martin <Dave.Martin@arm.com> Reported-by:
Steve McIntyre <steve.mcintyre@arm.com> Tested-by:
Steve McIntyre <93sam@debian.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Minas Harutyunyan authored
commit 4fe4f9fe upstream. Disabling all EP's allow to reset EP's to initial state. Introduced new function dwc2_hsotg_ep_disable_lock() which before calling dwc2_hsotg_ep_disable() function acquire hsotg->lock and release on exiting. From dwc2_hsotg_ep_disable() function removed acquiring hsotg->lock. In dwc2_hsotg_core_init_disconnected() function when USB reset interrupt asserted disabling all ep’s by dwc2_hsotg_ep_disable() function. This updates eliminating sparse imbalance warnings. Reverted changes in dwc2_hostg_disconnect() function. Introduced new function dwc2_hsotg_ep_disable_lock(). Changed dwc2_hsotg_ep_ops. Now disable point to dwc2_hsotg_ep_disable_lock() function. In functions dwc2_hsotg_udc_stop() and dwc2_hsotg_suspend() dwc2_hsotg_ep_disable() function replaced by dwc2_hsotg_ep_disable_lock() function. In dwc2_hsotg_ep_disable() function removed acquiring of hsotg->lock. Fixes: dccf1bad ("usb: dwc2: Disable all EP's on disconnect") Signed-off-by:
Minas Harutyunyan <hminas@synopsys.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Minas Harutyunyan authored
commit dccf1bad upstream. Disabling all EP's allow to reset EP's to initial state. On disconnect disable all EP's instead of just killing all requests. Because of some platform didn't catch disconnect event, same stuff added to dwc2_hsotg_core_init_disconnected() function when USB reset detected on the bus. Changed from version 1: Changed lock acquire flow in dwc2_hsotg_ep_disable() function. Signed-off-by:
-
Trond Myklebust authored
commit c7944ebb upstream. If we're revalidating an existing dentry in order to open a file, we need to ensure that we check the directory has not changed before we optimise away the lookup. Signed-off-by:
Qian Lu <luqia@amazon.com> Signed-off-by:
-
Trond Myklebust authored
commit 5ceb9d7f upstream. Refactor the code in nfs_lookup_revalidate() as a stepping stone towards optimising and fixing nfs4_lookup_revalidate(). Signed-off-by:
-
Trond Myklebust authored
commit be189f7e upstream. We need to ensure that inode and dentry revalidation occurs correctly on reopen of a file that is already open. Currently, we can end up not revalidating either in the case of NFSv4.0, due to the 'cached open' path. Let's fix that by ensuring that we only do cached open for the special cases of open recovery and delegation return. Reported-by:
Stan Hu <stanhu@gmail.com> Signed-off-by:
-
Sunil Muthuswamy authored
commit d5afa82c upstream. The current vsock code for removal of socket from the list is both subject to race and inefficient. It takes the lock, checks whether the socket is in the list, drops the lock and if the socket was on the list, deletes it from the list. This is subject to race because as soon as the lock is dropped once it is checked for presence, that condition cannot be relied upon for any decision. It is also inefficient because if the socket is present in the list, it takes the lock twice. Signed-off-by:
Sunil Muthuswamy <sunilmut@microsoft.com> Signed-off-by:
-
Sunil Muthuswamy authored
commit a9eeb998 upstream. Currently, hvsock does not implement any delayed or background close logic. Whenever the hvsock socket is closed, a FIN is sent to the peer, and the last reference to the socket is dropped, which leads to a call to .destruct where the socket can hang indefinitely waiting for the peer to close it's side. The can cause the user application to hang in the close() call. This change implements proper STREAM(TCP) closing handshake mechanism by sending the FIN to the peer and the waiting for the peer's FIN to arrive for a given timeout. On timeout, it will try to terminate the connection (i.e. a RST). This is in-line with other socket providers such as virtio. This change does not address the hang in the vmbus_hvsock_device_unregister where it waits indefinitely for the host to rescind the channel. That should be taken up as a separate fix. Signed-off-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
-
- 31 Jul, 2019 23 commits
-
-
Greg Kroah-Hartman authored
-
Linus Torvalds authored
commit d7852fbd upstream. It turns out that 'access()' (and 'faccessat()') can cause a lot of RCU work because it installs a temporary credential that gets allocated and freed for each system call. The allocation and freeing overhead is mostly benign, but because credentials can be accessed under the RCU read lock, the freeing involves a RCU grace period. Which is not a huge deal normally, but if you have a lot of access() calls, this causes a fair amount of seconday damage: instead of having a nice alloc/free patterns that hits in hot per-CPU slab caches, you have all those delayed free's, and on big machines with hundreds of cores, the RCU overhead can end up being enormous. But it turns out that all of this is entirely unnecessary. Exactly because access() only installs the credential as the thread-local subjective credential, the temporary cred pointer doesn't actually need to be RCU free'd at all. Once we're done using it, we can just free it synchronously and avoid all the RCU overhead. So add a 'non_rcu' flag to 'struct cred', which can be set by users that know they only use it in non-RCU context (there are other potential users for this). We can make it a union with the rcu freeing list head that we need for the RCU case, so this doesn't need any extra storage. Note that this also makes 'get_current_cred()' clear the new non_rcu flag, in case we have filesystems that take a long-term reference to the cred and then expect the RCU delayed freeing afterwards. It's not entirely clear that this is required, but it makes for clear semantics: the subjective cred remains non-RCU as long as you only access it synchronously using the thread-local accessors, but you _can_ use it as a generic cred if you want to. It is possible that we should just remove the whole RCU markings for ->cred entirely. Only ->real_cred is really supposed to be accessed through RCU, and the long-term cred copies that nfs uses might want to explicitly re-enable RCU freeing if required, rather than have get_current_cred() do it implicitly. But this is a "minimal semantic changes" change for the immediate problem. Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Paul E. McKenney <paulmck@linux.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jan Glauber <jglauber@marvell.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Jayachandran Chandrasekharan Nair <jnair@marvell.com> Cc: Greg KH <greg@kroah.com> Cc: Kees Cook <keescook@chromium.org> Cc: David Howells <dhowells@redhat.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Dan Williams authored
commit b70d31d0 upstream. In preparation for fixing a deadlock between wait_for_bus_probe_idle() and the nvdimm_bus_list_mutex arrange for __nd_ioctl() without nvdimm_bus_list_mutex held. This also unifies the 'dimm' and 'bus' level ioctls into a common nd_ioctl() preamble implementation. Marked for -stable as it is a pre-requisite for a follow-on fix. Cc: <stable@vger.kernel.org> Fixes: bf9bccc1 ("libnvdimm: pmem label sets and namespace instantiation") Cc: Vishal Verma <vishal.l.verma@intel.com> Tested-by:
Jane Chu <jane.chu@oracle.com> Link: https://lore.kernel.org/r/156341209518.292348.7183897251740665198.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Michael Neuling authored
commit f16d80b7 upstream. On systems like P9 powernv where we have no TM (or P8 booted with ppc_tm=off), userspace can construct a signal context which still has the MSR TS bits set. The kernel tries to restore this context which results in the following crash: Unexpected TM Bad Thing exception at c0000000000022fc (msr 0x8000000102a03031) tm_scratch=800000020280f033 Oops: Unrecoverable exception, sig: 6 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 0 PID: 1636 Comm: sigfuz Not tainted 5.2.0-11043-g0a8ad0ff #69 NIP: c0000000000022fc LR: 00007fffb2d67e48 CTR: 0000000000000000 REGS: c00000003fffbd70 TRAP: 0700 Not tainted (5.2.0-11045-g7142b497d8) MSR: 8000000102a03031 <SF,VEC,VSX,FP,ME,IR,DR,LE,TM[E]> CR: 42004242 XER: 00000000 CFAR: c0000000000022e0 IRQMASK: 0 GPR00: 0000000000000072 00007fffb2b6e560 00007fffb2d87f00 0000000000000669 GPR04: 00007fffb2b6e728 0000000000000000 0000000000000000 00007fffb2b6f2a8 GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR12: 0000000000000000 00007fffb2b76900 0000000000000000 0000000000000000 GPR16: 00007fffb2370000 00007fffb2d84390 00007fffea3a15ac 000001000a250420 GPR20: 00007fffb2b6f260 0000000010001770 0000000000000000 0000000000000000 GPR24: 00007fffb2d843a0 00007fffea3a14a0 0000000000010000 0000000000800000 GPR28: 00007fffea3a14d8 00000000003d0f00 0000000000000000 00007fffb2b6e728 NIP [c0000000000022fc] rfi_flush_fallback+0x7c/0x80 LR [00007fffb2d67e48] 0x7fffb2d67e48 Call Trace: Instruction dump: e96a0220 e96a02a8 e96a0330 e96a03b8 394a0400 4200ffdc 7d2903a6 e92d0c00 e94d0c08 e96d0c10 e82d0c18 7db242a6 <4c000024> 7db243a6 7db142a6 f82d0c18 The problem is the signal code assumes TM is enabled when CONFIG_PPC_TRANSACTIONAL_MEM is enabled. This may not be the case as with P9 powernv or if `ppc_tm=off` is used on P8. This means any local user can crash the system. Fix the problem by returning a bad stack frame to the user if they try to set the MSR TS bits with sigreturn() on systems where TM is not supported. Found with sigfuz kernel selftest on P9. This fixes CVE-2019-13648. Fixes: 2b0a576d ("powerpc: Add new transactional memory state to the signal context") Cc: stable@vger.kernel.org # v3.9 Reported-by:
Praveen Pandey <Praveen.Pandey@in.ibm.com> Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190719050502.405-1-mikey@neuling.orgSigned-off-by:
-
Gautham R. Shenoy authored
commit 4d202c8c upstream. xive_find_target_in_mask() has the following for(;;) loop which has a bug when @first == cpumask_first(@mask) and condition 1 fails to hold for every CPU in @mask. In this case we loop forever in the for-loop. first = cpu; for (;;) { if (cpu_online(cpu) && xive_try_pick_target(cpu)) // condition 1 return cpu; cpu = cpumask_next(cpu, mask); if (cpu == first) // condition 2 break; if (cpu >= nr_cpu_ids) // condition 3 cpu = cpumask_first(mask); } This is because, when @first == cpumask_first(@mask), we never hit the condition 2 (cpu == first) since prior to this check, we would have executed "cpu = cpumask_next(cpu, mask)" which will set the value of @cpu to a value greater than @first or to nr_cpus_ids. When this is coupled with the fact that condition 1 is not met, we will never exit this loop. This was discovered by the hard-lockup detector while running LTP test concurrently with SMT switch tests. watchdog: CPU 12 detected hard LOCKUP on other CPUs 68 watchdog: CPU 12 TB:85587019220796, last SMP heartbeat TB:85578827223399 (15999ms ago) watchdog: CPU 68 Hard LOCKUP watchdog: CPU 68 TB:85587019361273, last heartbeat TB:85576815065016 (19930ms ago) CPU: 68 PID: 45050 Comm: hxediag Kdump: loaded Not tainted 4.18.0-100.el8.ppc64le #1 NIP: c0000000006f5578 LR: c000000000cba9ec CTR: 0000000000000000 REGS: c000201fff3c7d80 TRAP: 0100 Not tainted (4.18.0-100.el8.ppc64le) MSR: 9000000002883033 <SF,HV,VEC,VSX,FP,ME,IR,DR,RI,LE> CR: 24028424 XER: 00000000 CFAR: c0000000006f558c IRQMASK: 1 GPR00: c0000000000afc58 c000201c01c43400 c0000000015ce500 c000201cae26ec18 GPR04: 0000000000000800 0000000000000540 0000000000000800 00000000000000f8 GPR08: 0000000000000020 00000000000000a8 0000000080000000 c00800001a1beed8 GPR12: c0000000000b1410 c000201fff7f4c00 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000540 0000000000000001 GPR20: 0000000000000048 0000000010110000 c00800001a1e3780 c000201cae26ed18 GPR24: 0000000000000000 c000201cae26ed8c 0000000000000001 c000000001116bc0 GPR28: c000000001601ee8 c000000001602494 c000201cae26ec18 000000000000001f NIP [c0000000006f5578] find_next_bit+0x38/0x90 LR [c000000000cba9ec] cpumask_next+0x2c/0x50 Call Trace: [c000201c01c43400] [c000201cae26ec18] 0xc000201cae26ec18 (unreliable) [c000201c01c43420] [c0000000000afc58] xive_find_target_in_mask+0x1b8/0x240 [c000201c01c43470] [c0000000000b0228] xive_pick_irq_target.isra.3+0x168/0x1f0 [c000201c01c435c0] [c0000000000b1470] xive_irq_startup+0x60/0x260 [c000201c01c43640] [c0000000001d8328] __irq_startup+0x58/0xf0 [c000201c01c43670] [c0000000001d844c] irq_startup+0x8c/0x1a0 [c000201c01c436b0] [c0000000001d57b0] __setup_irq+0x9f0/0xa90 [c000201c01c43760] [c0000000001d5aa0] request_threaded_irq+0x140/0x220 [c000201c01c437d0] [c00800001a17b3d4] bnx2x_nic_load+0x188c/0x3040 [bnx2x] [c000201c01c43950] [c00800001a187c44] bnx2x_self_test+0x1fc/0x1f70 [bnx2x] [c000201c01c43a90] [c000000000adc748] dev_ethtool+0x11d8/0x2cb0 [c000201c01c43b60] [c000000000b0b61c] dev_ioctl+0x5ac/0xa50 [c000201c01c43bf0] [c000000000a8d4ec] sock_do_ioctl+0xbc/0x1b0 [c000201c01c43c60] [c000000000a8dfb8] sock_ioctl+0x258/0x4f0 [c000201c01c43d20] [c0000000004c9704] do_vfs_ioctl+0xd4/0xa70 [c000201c01c43de0] [c0000000004ca274] sys_ioctl+0xc4/0x160 [c000201c01c43e30] [c00000000000b388] system_call+0x5c/0x70 Instruction dump: 78aad182 54a806be 3920ffff 78a50664 794a1f24 7d294036 7d43502a 7d295039 4182001c 48000034 78a9d182 79291f24 <7d23482a> 2fa90000 409e0020 38a50040 To fix this, move the check for condition 2 after the check for condition 3, so that we are able to break out of the loop soon after iterating through all the CPUs in the @mask in the problem case. Use do..while() to achieve this. Fixes: 243e2511 ("powerpc/xive: Native exploitation of the XIVE interrupt controller") Cc: stable@vger.kernel.org # v4.12+ Reported-by:
Indira P. Joga <indira.priya@in.ibm.com> Signed-off-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by:
-
Hui Wang authored
commit 3f880949 upstream. This conexant codec isn't in the supported codec list yet, the hda generic driver can drive this codec well, but on a Lenovo machine with mute/mic-mute leds, we need to apply CXT_FIXUP_THINKPAD_ACPI to make the leds work. After adding this codec to the list, the driver patch_conexant.c will apply THINKPAD_ACPI to this machine. Cc: stable@vger.kernel.org Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Kai-Heng Feng authored
commit 70256b42 upstream. Commit 7b9584fa ("staging: line6: Move altsetting to properties") set a wrong altsetting for LINE6_PODHD500_1 during refactoring. Set the correct altsetting number to fix the issue. BugLink: https://bugs.launchpad.net/bugs/1790595 Fixes: 7b9584fa ("staging: line6: Move altsetting to properties") Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Ding Xiang authored
commit 607975b3 upstream. put_device will call ac97_codec_release to free ac97_codec_device and other resources, so remove the kfree and other redundant code. Fixes: 74426fbf ("ALSA: ac97: add an ac97 bus") Signed-off-by:
Ding Xiang <dingxiang@cmss.chinamobile.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Kefeng Wang authored
commit 0c7d37f4 upstream. The base value in do_div() called by hpet_time_div() is truncated from unsigned long to uint32_t, resulting in a divide-by-zero exception. UBSAN: Undefined behaviour in ../drivers/char/hpet.c:572:2 division by zero CPU: 1 PID: 23682 Comm: syz-executor.3 Not tainted 4.4.184.x86_64+ #4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 0000000000000000 b573382df1853d00 ffff8800a3287b98 ffffffff81ad7561 ffff8800a3287c00 ffffffff838b35b0 ffffffff838b3860 ffff8800a3287c20 0000000000000000 ffff8800a3287bb0 ffffffff81b8f25e ffffffff838b35a0 Call Trace: [<ffffffff81ad7561>] __dump_stack lib/dump_stack.c:15 [inline] [<ffffffff81ad7561>] dump_stack+0xc1/0x120 lib/dump_stack.c:51 [<ffffffff81b8f25e>] ubsan_epilogue+0x12/0x8d lib/ubsan.c:166 [<ffffffff81b900cb>] __ubsan_handle_divrem_overflow+0x282/0x2c8 lib/ubsan.c:262 [<ffffffff823560dd>] hpet_time_div drivers/char/hpet.c:572 [inline] [<ffffffff823560dd>] hpet_ioctl_common drivers/char/hpet.c:663 [inline] [<ffffffff823560dd>] hpet_ioctl_common.cold+0xa8/0xad drivers/char/hpet.c:577 [<ffffffff81e63d56>] hpet_ioctl+0xc6/0x180 drivers/char/hpet.c:676 [<ffffffff81711590>] vfs_ioctl fs/ioctl.c:43 [inline] [<ffffffff81711590>] file_ioctl fs/ioctl.c:470 [inline] [<ffffffff81711590>] do_vfs_ioctl+0x6e0/0xf70 fs/ioctl.c:605 [<ffffffff81711eb4>] SYSC_ioctl fs/ioctl.c:622 [inline] [<ffffffff81711eb4>] SyS_ioctl+0x94/0xc0 fs/ioctl.c:613 [<ffffffff82846003>] tracesys_phase2+0x90/0x95 The main C reproducer autogenerated by syzkaller, syscall(__NR_mmap, 0x20000000, 0x1000000, 3, 0x32, -1, 0); memcpy((void*)0x20000100, "/dev/hpet\000", 10); syscall(__NR_openat, 0xffffffffffffff9c, 0x20000100, 0, 0); syscall(__NR_ioctl, r[0], 0x40086806, 0x40000000000000); Fix it by using div64_ul(). Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
Zhang HongJun <zhanghongjun2@huawei.com> Cc: stable <stable@vger.kernel.org> Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20190711132757.130092-1-wangkefeng.wang@huawei.comSigned-off-by:
-
Alexander Usyskin authored
commit 1be8624a upstream. Add Mule Creek Canyon (PCH) MEI device ids for Elkhart Lake (EHL) Platform. Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190712095814.20746-1-tomas.winkler@intel.comSigned-off-by:
-
YueHaibing authored
commit 3d139703 upstream. If BITREVERSE is m and FPGA_MGR_ALTERA_PS_SPI is y, build fails: drivers/fpga/altera-ps-spi.o: In function `altera_ps_write': altera-ps-spi.c:(.text+0x4ec): undefined reference to `byte_rev_table' Select BITREVERSE to fix this. Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: fcfe18f8 ("fpga-manager: altera-ps-spi: use bitrev8x4") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Cc: stable <stable@vger.kernel.org> Acked-by:
Moritz Fischer <mdf@kernel.org> Link: https://lore.kernel.org/r/20190708071356.50928-1-yuehaibing@huawei.comSigned-off-by:
-
Hridya Valsaraju authored
commit 49ed9694 upstream. Currently, a transaction to context manager from its own process is prevented by checking if its binder_proc struct is the same as that of the sender. However, this would not catch cases where the process opens the binder device again and uses the new fd to send a transaction to the context manager. Reported-by: syzbot+8b3c354d33c4ac78bfad@syzkaller.appspotmail.com Signed-off-by:
Hridya Valsaraju <hridya@google.com> Acked-by:
-
Zhenzhong Duan authored
commit 517c3ba0 upstream. X86_HYPER_NATIVE isn't accurate for checking if running on native platform, e.g. CONFIG_HYPERVISOR_GUEST isn't set or "nopv" is enabled. Checking the CPU feature bit X86_FEATURE_HYPERVISOR to determine if it's running on native platform is more accurate. This still doesn't cover the platforms on which X86_FEATURE_HYPERVISOR is unsupported, e.g. VMware, but there is nothing which can be done about this scenario. Fixes: 8a4b06d3 ("x86/speculation/mds: Add sysfs reporting for MDS") Signed-off-by:
Zhenzhong Duan <zhenzhong.duan@oracle.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1564022349-17338-1-git-send-email-zhenzhong.duan@oracle.comSigned-off-by:
-
Hans de Goede authored
commit d02f1aa3 upstream. Some Lenovo 2-in-1s with a detachable keyboard have a portrait screen but advertise a landscape resolution and pitch, resulting in a messed up display if the kernel tries to show anything on the efifb (because of the wrong pitch). Fix this by adding a new DMI match table for devices which need to have their width and height swapped. At first it was tried to use the existing table for overriding some of the efifb parameters, but some of the affected devices have variants with different LCD resolutions which will not work with hardcoded override values. Reference: https://bugzilla.redhat.com/show_bug.cgi?id=1730783Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Qu Wenruo authored
commit 42c16da6 upstream. As btrfs(5) specified: Note If nodatacow or nodatasum are enabled, compression is disabled. If NODATASUM or NODATACOW set, we should not compress the extent. Normally NODATACOW is detected properly in run_delalloc_range() so compression won't happen for NODATACOW. However for NODATASUM we don't have any check, and it can cause compressed extent without csum pretty easily, just by: mkfs.btrfs -f $dev mount $dev $mnt -o nodatasum touch $mnt/foobar mount -o remount,datasum,compress $mnt xfs_io -f -c "pwrite 0 128K" $mnt/foobar And in fact, we have a bug report about corrupted compressed extent without proper data checksum so even RAID1 can't recover the corruption. (https://bugzilla.kernel.org/show_bug.cgi?id=199707) Running compression without proper checksum could cause more damage when corruption happens, as compressed data could make the whole extent unreadable, so there is no need to allow compression for NODATACSUM. The fix will refactor the inode compression check into two parts: - inode_can_compress() As the hard requirement, checked at btrfs_run_delalloc_range(), so no compression will happen for NODATASUM inode at all. - inode_need_compress() As the soft requirement, checked at btrfs_run_delalloc_range() and compress_file_range(). Reported-by:
James Harvey <jamespharvey20@gmail.com> CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Ryan Kennedy authored
commit f3dccdaa upstream. The AMD PLL USB quirk is incorrectly enabled on newer Ryzen chipsets. The logic in usb_amd_find_chipset_info currently checks for unaffected chipsets rather than affected ones. This broke once a new chipset was added in e788787e. It makes more sense to reverse the logic so it won't need to be updated as new chipsets are added. Note that the core of the workaround in usb_amd_quirk_pll does correctly check the chipset. Signed-off-by:
Ryan Kennedy <ryan5544@gmail.com> Fixes: e788787e ("usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume") Cc: stable <stable@vger.kernel.org> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20190704153529.9429-2-ryan5544@gmail.comSigned-off-by:
-
Phong Tran authored
commit f90bf1ec upstream. syzboot reported that https://syzkaller.appspot.com/bug?extid=fd2bd7df88c606eea4ef There is not consitency parameter in cluste_id_get/put calling. In case of getting the id with result is failure, the wusbhc->cluster_id will not be updated and this can not be used for wusb_cluster_id_put(). Tested report https://groups.google.com/d/msg/syzkaller-bugs/0znZopp3-9k/oxOrhLkLEgAJ Reproduce and gdb got the details: 139 addr = wusb_cluster_id_get(); (gdb) n 140 if (addr == 0) (gdb) print addr $1 = 254 '\376' (gdb) n 142 result = __hwahc_set_cluster_id(hwahc, addr); (gdb) print result $2 = -71 (gdb) break wusb_cluster_id_put Breakpoint 3 at 0xffffffff836e3f20: file drivers/usb/wusbcore/wusbhc.c, line 384. (gdb) s Thread 2 hit Breakpoint 3, wusb_cluster_id_put (id=0 '\000') at drivers/usb/wusbcore/wusbhc.c:384 384 id = 0xff - id; (gdb) n 385 BUG_ON(id >= CLUSTER_IDS); (gdb) print id $3 = 255 '\377' Reported-by: syzbot+fd2bd7df88c606eea4ef@syzkaller.appspotmail.com Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 68037aa7 ] The usage is now hidden in an #ifdef, so we need to move the variable itself in there as well to avoid this warning: kernel/locking/lockdep_proc.c:203:21: error: unused variable 'class' [-Werror,-Wunused-variable] Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Konstantin Khlebnikov authored
[ Upstream commit 1e426fe2 ] This function is used by ptrace and proc files like /proc/pid/cmdline and /proc/pid/environ. Access_remote_vm never returns error codes, all errors are ignored and only size of successfully read data is returned. So, if current task was killed we'll simply return 0 (bytes read). Mmap_sem could be locked for a long time or forever if something goes wrong. Using a killable lock permits cleanup of stuck tasks and simplifies investigation. Link: http://lkml.kernel.org/r/156007494202.3335.16782303099589302087.stgit@buzzSigned-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by:
Michal Koutný <mkoutny@suse.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Roman Gushchin <guro@fb.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Yuyang Du authored
[ Upstream commit 68d41d8c ] The stats variable nr_unused_locks is incremented every time a new lock class is register and decremented when the lock is first used in __lock_acquire(). And after all, it is shown and checked in lockdep_stats. However, under configurations that either CONFIG_TRACE_IRQFLAGS or CONFIG_PROVE_LOCKING is not defined: The commit: 09180651 ("locking/lockdep: Consolidate lock usage bit initialization") missed marking the LOCK_USED flag at IRQ usage initialization because as mark_usage() is not called. And the commit: 886532ae ("locking/lockdep: Move mark_lock() inside CONFIG_TRACE_IRQFLAGS && CONFIG_PROVE_LOCKING") further made mark_lock() not defined such that the LOCK_USED cannot be marked at all when the lock is first acquired. As a result, we fix this by not showing and checking the stats under such configurations for lockdep_stats. Reported-by:
Qian Cai <cai@lca.pw> Signed-off-by:
Yuyang Du <duyuyang@gmail.com> Signed-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit 8a713e7d ] Do not remain stuck forever if something goes wrong. Using a killable lock permits cleanup of stuck tasks and simplifies investigation. This function is also used for /proc/pid/smaps. Link: http://lkml.kernel.org/r/156007493160.3335.14447544314127417266.stgit@buzzSigned-off-by:
Roman Gushchin <guro@fb.com> Reviewed-by:
Cyrill Gorcunov <gorcunov@gmail.com> Reviewed-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by:
-
Arnd Bergmann authored
[ Upstream commit 752c2ea2 ] The cudbg_collect_mem_region() and cudbg_read_fw_mem() both use several hundred kilobytes of kernel stack space. One gets inlined into the other, which causes the stack usage to be combined beyond the warning limit when building with clang: drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c:1057:12: error: stack frame size of 1244 bytes in function 'cudbg_collect_mem_region' [-Werror,-Wframe-larger-than=] Restructuring cudbg_collect_mem_region() lets clang do the same optimization that gcc does and reuse the stack slots as it can see that the large variables are never used together. A better fix might be to avoid using cudbg_meminfo on the stack altogether, but that requires a larger rewrite. Fixes: a1c69520 ("cxgb4: collect MC memory dump") Signed-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit cd9e2bb8 ] Do not remain stuck forever if something goes wrong. Using a killable lock permits cleanup of stuck tasks and simplifies investigation. It seems ->d_revalidate() could return any error (except ECHILD) to abort validation and pass error as result of lookup sequence. [akpm@linux-foundation.org: fix proc_map_files_lookup() return value, per Andrei] Link: http://lkml.kernel.org/r/156007493995.3335.9595044802115356911.stgit@buzzSigned-off-by:
-
