- 07 May, 2020 13 commits
-
-
Jason A. Donenfeld authored
Without setting these to NULL, clang complains in certain configurations that have CONFIG_IPV6=n: In file included from drivers/net/wireguard/ratelimiter.c:223: drivers/net/wireguard/selftest/ratelimiter.c:173:34: error: variable 'skb6' is uninitialized when used here [-Werror,-Wuninitialized] ret = timings_test(skb4, hdr4, skb6, hdr6, &test_count); ^~~~ drivers/net/wireguard/selftest/ratelimiter.c:123:29: note: initialize the variable 'skb6' to silence this warning struct sk_buff *skb4, *skb6; ^ = NULL drivers/net/wireguard/selftest/ratelimiter.c:173:40: error: variable 'hdr6' is uninitialized when used here [-Werror,-Wuninitialized] ret = timings_test(skb4, hdr4, skb6, hdr6, &test_count); ^~~~ drivers/net/wireguard/selftest/ratelimiter.c:125:22: note: initialize the variable 'hdr6' to silence this warning struct ipv6hdr *hdr6; ^ We silence this warning by setting the variables to NULL as the warning suggests. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason A. Donenfeld authored
Users with pathological hardware reported CPU stalls on CONFIG_ PREEMPT_VOLUNTARY=y, because the ringbuffers would stay full, meaning these workers would never terminate. That turned out not to be okay on systems without forced preemption, which Sultan observed. This commit adds a cond_resched() to the bottom of each loop iteration, so that these workers don't hog the core. Note that we don't need this on the napi poll worker, since that terminates after its budget is expended. Suggested-by: Sultan Alsawaf <sultan@kerneltoast.com> Reported-by: Wang Jian <larkwang@gmail.com> Fixes: e7096c13 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason A. Donenfeld authored
It's already possible to create two different interfaces and loop packets between them. This has always been possible with tunnels in the kernel, and isn't specific to wireguard. Therefore, the networking stack already needs to deal with that. At the very least, the packet winds up exceeding the MTU and is discarded at that point. So, since this is already something that happens, there's no need to forbid the not very exceptional case of routing a packet back to the same interface; this loop is no different than others, and we shouldn't special case it, but rather rely on generic handling of loops in general. This also makes it easier to do interesting things with wireguard such as onion routing. At the same time, we add a selftest for this, ensuring that both onion routing works and infinite routing loops do not crash the kernel. We also add a test case for wireguard interfaces nesting packets and sending traffic between each other, as well as the loop in this case too. We make sure to send some throughput-heavy traffic for this use case, to stress out any possible recursion issues with the locks around workqueues. Fixes: e7096c13 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason A. Donenfeld authored
While at some point it might have made sense to be running these tests on ppc64 with 4k stacks, the kernel hasn't actually used 4k stacks on 64-bit powerpc in a long time, and more interesting things that we test don't really work when we deviate from the default (16k). So, we stop pushing our luck in this commit, and return to the default instead of the minimum. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Grygorii Strashko authored
The K3 INTA driver, which is source TX/RX IRQs for CPSW NUSS, defines IRQs triggering type as EDGE by default, but triggering type for CPSW NUSS TX/RX IRQs has to be LEVEL as the EDGE triggering type may cause unnecessary IRQs triggering and NAPI scheduling for empty queues. It was discovered with RT-kernel. Fix it by explicitly specifying CPSW NUSS TX/RX IRQ type as IRQF_TRIGGER_HIGH. Fixes: 93a76530 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
Currently bool ionic_cq.done_color is exported using debugfs_create_u8(), which requires a cast, preventing further compiler checks. Fix this by switching to debugfs_create_bool(), and dropping the cast. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
When ndo_get_phys_port_name() for the CPU port was added we introduced an early check for when the DSA master network device in dsa_master_ndo_setup() already implements ndo_get_phys_port_name(). When we perform the teardown operation in dsa_master_ndo_teardown() we would not be checking that cpu_dp->orig_ndo_ops was successfully allocated and non-NULL initialized. With network device drivers such as virtio_net, this leads to a NPD as soon as the DSA switch hanging off of it gets torn down because we are now assigning the virtio_net device's netdev_ops a NULL pointer. Fixes: da7b9e9b ("net: dsa: Add ndo_get_phys_port_name() for CPU port") Reported-by: Allen Pais <allen.pais@oracle.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Allen Pais <allen.pais@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
This was caused by a poor merge conflict resolution on my side. The "act = &cls->rule->action.entries[0];" assignment was already present in the code prior to the patch mentioned below. Fixes: e13c2075 ("net: dsa: refactor matchall mirred action to separate function") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Willem de Bruijn authored
Syzkaller again found a path to a kernel crash through bad gso input: a packet with transport header extending beyond skb_headlen(skb). Tighten validation at kernel entry: - Verify that the transport header lies within the linear section. To avoid pulling linux/tcp.h, verify just sizeof tcphdr. tcp_gso_segment will call pskb_may_pull (th->doff * 4) before use. - Match the gso_type against the ip_proto found by the flow dissector. Fixes: bfd5f4a3 ("packet: Add GSO/csum offload support.") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ahmed Abdelsalam authored
The Segment Routing Header (SRH) which defines the SRv6 dataplane is defined in RFC8754. RFC8754 (section 4.1) defines the SR source node behavior which encapsulates packets into an outer IPv6 header and SRH. The SR source node encodes the full list of Segments that defines the packet path in the SRH. Then, the first segment from list of Segments is copied into the Destination address of the outer IPv6 header and the packet is sent to the first hop in its path towards the destination. If the Segment list has only one segment, the SR source node can omit the SRH as he only segment is added in the destination address. RFC8754 (section 4.1.1) defines the Reduced SRH, when a source does not require the entire SID list to be preserved in the SRH. A reduced SRH does not contain the first segment of the related SR Policy (the first segment is the one already in the DA of the IPv6 header), and the Last Entry field is set to n-2, where n is the number of elements in the SR Policy. RFC8754 (section 4.3.1.1) defines the SRH processing and the logic to validate the SRH (S09, S10, S11) which works for both reduced and non-reduced behaviors. This patch updates seg6_validate_srh() to validate the SRH as per RFC8754. Signed-off-by: Ahmed Abdelsalam <ahabdels@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Vladimir Oltean says: ==================== FDB fixes for Felix and Ocelot switches This series fixes the following problems: - Dynamically learnt addresses never expiring (neither for Ocelot nor for Felix) - Half of the FDB not visible in 'bridge fdb show' (for Felix only) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
One may notice that automatically-learnt entries 'never' expire, even though the bridge configures the address age period at 300 seconds. Actually the value written to hardware corresponds to a time interval 1000 times higher than intended, i.e. 83 hours. Fixes: a556c76a ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Faineli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
When running 'bridge fdb dump' on Felix, sometimes learnt and static MAC addresses would appear, sometimes they wouldn't. Turns out, the MAC table has 4096 entries on VSC7514 (Ocelot) and 8192 entries on VSC9959 (Felix), so the existing code from the Ocelot common library only dumped half of Felix's MAC table. They are both organized as a 4-way set-associative TCAM, so we just need a single variable indicating the correct number of rows. Fixes: 56051948 ("net: dsa: ocelot: add driver for Felix switch family") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 06 May, 2020 7 commits
-
-
Vladimir Oltean authored
It looks like the sja1105 external timestamping input is not as generic as we thought. When fed a signal with 50% duty cycle, it will timestamp both the rising and the falling edge. When fed a short pulse signal, only the timestamp of the falling edge will be seen in the PTPSYNCTS register, because that of the rising edge had been overwritten. So the moral is: don't feed it short pulse inputs. Luckily this is not a complete deal breaker, as we can still work with 1 Hz square waves. But the problem is that the extts polling period was not dimensioned enough for this input signal. If we leave the period at half a second, we risk losing timestamps due to jitter in the measuring process. So we need to increase it to 4 times per second. Also, the very least we can do to inform the user is to deny any other flags combination than with PTP_RISING_EDGE and PTP_FALLING_EDGE both set. Fixes: 747e5eb3 ("net: dsa: sja1105: configure the PTP_CLK pin as EXT_TS or PER_OUT") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Since chunk_size is no longer an integer, we can not use it directly as an argument of setsockopt(). This patch should fix tcp_mmap for Big Endian kernels. Fixes: 597b01ed ("selftests: net: avoid ptl lock contention in tcp_mmap") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Arjun Roy <arjunroy@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Murali Karicheri authored
Fix following sparse checker warning:- net/hsr/hsr_slave.c:38:18: warning: incorrect type in assignment (different base types) net/hsr/hsr_slave.c:38:18: expected unsigned short [unsigned] [usertype] protocol net/hsr/hsr_slave.c:38:18: got restricted __be16 [usertype] h_proto net/hsr/hsr_slave.c:39:25: warning: restricted __be16 degrades to integer net/hsr/hsr_slave.c:39:57: warning: restricted __be16 degrades to integer Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Antoine Tenart authored
netdev_update_features() must be called with the rtnl lock taken. Not doing so triggers a warning, as ASSERT_RTNL() is used in __netdev_update_features(), the first function called by netdev_update_features(). Fix this. Fixes: c850240b ("net: macsec: report real_dev features when HW offloading is enabled") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
The "info->fs.location" is a u32 that comes from the user via the ethtool_set_rxnfc() function. We need to check for invalid values to prevent a buffer overflow. I copy and pasted this check from the mvpp2_ethtool_cls_rule_ins() function. Fixes: 90b509b3 ("net: mvpp2: cls: Add Classification offload support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
The "rss_context" variable comes from the user via ethtool_get_rxfh(). It can be any u32 value except zero. Eventually it gets passed to mvpp22_rss_ctx() and if it is over MVPP22_N_RSS_TABLES (8) then it results in an array overflow. Fixes: 895586d5 ("net: mvpp2: cls: Use RSS contexts to handle RSS tables") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
We added fields in tcp_zerocopy_receive structure, so make sure to clear all fields to not pass garbage to the kernel. We were lucky because recent additions added 'out' parameters, still we need to clean our reference implementation, before folks copy/paste it. Fixes: c8856c05 ("tcp-zerocopy: Return inq along with tcp receive zerocopy.") Fixes: 33946518 ("tcp-zerocopy: Return sk_err (if set) along with tcp receive zerocopy.") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Arjun Roy <arjunroy@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 05 May, 2020 2 commits
-
-
Roman Mashak authored
When a new neighbor entry has been added, event is generated but it does not include protocol, because its value is assigned after the event notification routine has run, so move protocol assignment code earlier. Fixes: df9b0e30 ("neighbor: Add protocol attribute") Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Roman Mashak <mrv@mojatatu.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dejin Zheng authored
Commit d7a5502b ("net: broadcom: convert to devm_platform_ioremap_resource_byname()") will broke this driver. idm_base and nicpm_base were optional, after this change, they are mandatory. it will probe fails with -22 when the dtb doesn't have them defined. so revert part of this commit and make idm_base and nicpm_base as optional. Fixes: d7a5502b ("net: broadcom: convert to devm_platform_ioremap_resource_byname()") Reported-by: Jonathan Richardson <jonathan.richardson@broadcom.com> Cc: Scott Branden <scott.branden@broadcom.com> Cc: Ray Jui <ray.jui@broadcom.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 04 May, 2020 13 commits
-
-
Qiushi Wu authored
In function nfp_abm_vnic_set_mac, pointer nsp is allocated by nfp_nsp_open. But when nfp_nsp_has_hwinfo_lookup fail, the pointer is not released, which can lead to a memory leak bug. Fix this issue by adding nfp_nsp_close(nsp) in the error path. Fixes: f6e71efd ("nfp: abm: look up MAC addresses via management FW") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Cong Wang authored
In lec_arp_clear_vccs() only entry->vcc is freed, but vcc could be installed on entry->recv_vcc too in lec_vcc_added(). This fixes the following memory leak: unreferenced object 0xffff8880d9266b90 (size 16): comm "atm2", pid 425, jiffies 4294907980 (age 23.488s) hex dump (first 16 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 6b 6b 6b a5 ............kkk. backtrace: [<(____ptrval____)>] kmem_cache_alloc_trace+0x10e/0x151 [<(____ptrval____)>] lane_ioctl+0x4b3/0x569 [<(____ptrval____)>] do_vcc_ioctl+0x1ea/0x236 [<(____ptrval____)>] svc_ioctl+0x17d/0x198 [<(____ptrval____)>] sock_do_ioctl+0x47/0x12f [<(____ptrval____)>] sock_ioctl+0x2f9/0x322 [<(____ptrval____)>] vfs_ioctl+0x1e/0x2b [<(____ptrval____)>] ksys_ioctl+0x61/0x80 [<(____ptrval____)>] __x64_sys_ioctl+0x16/0x19 [<(____ptrval____)>] do_syscall_64+0x57/0x65 [<(____ptrval____)>] entry_SYSCALL_64_after_hwframe+0x49/0xb3 Cc: Gengming Liu <l.dmxcsnsbh@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Cong Wang authored
Gengming reported a UAF in lec_arp_clear_vccs(), where we add a vcc socket to an entry in a per-device list but free the socket without removing it from the list when vcc->dev is NULL. We need to call lec_vcc_close() to search and remove those entries contain the vcc being destroyed. This can be done by calling vcc->push(vcc, NULL) unconditionally in vcc_destroy_socket(). Another issue discovered by Gengming's reproducer is the vcc->dev may point to the static device lecatm_dev, for which we don't need to register/unregister device, so we can just check for vcc->dev->ops->owner. Reported-by: Gengming Liu <l.dmxcsnsbh@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
The multiplication of cfg->ctr[1] by 1000000000 is performed using a 32 bit multiplication (since cfg->ctr[1] is a u32) and this can lead to a potential overflow. Fix this by making the constant a ULL to ensure a 64 bit multiply occurs. Fixes: 504723af ("net: stmmac: Add basic EST support for GMAC5+") Addresses-Coverity: ("Unintentional integer overflow") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Cong Wang authored
When we tell kernel to dump filters from root (ffff:ffff), those filters on ingress (ffff:0000) are matched, but their true parents must be dumped as they are. However, kernel dumps just whatever we tell it, that is either ffff:ffff or ffff:0000: $ nl-cls-list --dev=dummy0 --parent=root cls basic dev dummy0 id none parent root prio 49152 protocol ip match-all cls basic dev dummy0 id :1 parent root prio 49152 protocol ip match-all $ nl-cls-list --dev=dummy0 --parent=ffff: cls basic dev dummy0 id none parent ffff: prio 49152 protocol ip match-all cls basic dev dummy0 id :1 parent ffff: prio 49152 protocol ip match-all This is confusing and misleading, more importantly this is a regression since 4.15, so the old behavior must be restored. And, when tc filters are installed on a tc class, the parent should be the classid, rather than the qdisc handle. Commit edf6711c ("net: sched: remove classid and q fields from tcf_proto") removed the classid we save for filters, we can just restore this classid in tcf_block. Steps to reproduce this: ip li set dev dummy0 up tc qd add dev dummy0 ingress tc filter add dev dummy0 parent ffff: protocol arp basic action pass tc filter show dev dummy0 root Before this patch: filter protocol arp pref 49152 basic filter protocol arp pref 49152 basic handle 0x1 action order 1: gact action pass random type none pass val 0 index 1 ref 1 bind 1 After this patch: filter parent ffff: protocol arp pref 49152 basic filter parent ffff: protocol arp pref 49152 basic handle 0x1 action order 1: gact action pass random type none pass val 0 index 1 ref 1 bind 1 Fixes: a10fa201 ("net: sched: propagate q and parent from caller down to tcf_fill_node") Fixes: edf6711c ("net: sched: remove classid and q fields from tcf_proto") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
gcc-10 warns about functions that return a pointer to a stack variable. In chcr_write_cpl_set_tcb_ulp(), this does not actually happen, but it's too hard to see for the compiler: drivers/crypto/chelsio/chcr_ktls.c: In function 'chcr_write_cpl_set_tcb_ulp.constprop': drivers/crypto/chelsio/chcr_ktls.c:760:9: error: function may return address of local variable [-Werror=return-local-addr] 760 | return pos; | ^~~ drivers/crypto/chelsio/chcr_ktls.c:712:5: note: declared here 712 | u8 buf[48] = {0}; | ^~~ Split the middle part of the function out into a helper to make it easier to understand by both humans and compilers, which avoids the warning. Fixes: 5a4b9fe7 ("cxgb4/chcr: complete record tx handling") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
With the introduction of TX coalescing, .ndo_start_xmit now potentially starts the TX completion timer. So only kill the timer _after_ TX has been disabled. Fixes: ee1e52d1 ("s390/qeth: add TX IRQ coalescing support for IQD devices") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dejin Zheng authored
the related system resources were not released when enetc_hw_alloc() return error in the enetc_pci_mdio_probe(), add iounmap() for error handling label "err_hw_alloc" to fix it. Fixes: 6517798d ("enetc: Make MDIO accessors more generic and export to include/linux/fsl") Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tariq Toukan authored
When ENOSPC is set the idx is still valid and gets set to the global MLX4_SINK_COUNTER_INDEX. However gcc's static analysis cannot tell that ENOSPC is impossible from mlx4_cmd_imm() and gives this warning: drivers/net/ethernet/mellanox/mlx4/main.c:2552:28: warning: 'idx' may be used uninitialized in this function [-Wmaybe-uninitialized] 2552 | priv->def_counter[port] = idx; Also, when ENOSPC is returned mlx4_allocate_default_counters should not fail. Fixes: 6de5f7f6 ("net/mlx4_core: Allocate default counter per port") Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Aya Levin authored
Devlink health core conditions the reporter's recovery with the expiration of the grace period. This is not relevant for the first recovery. Explicitly demand that the grace period will only apply to recoveries other than the first. Fixes: c8e1da0b ("devlink: Add health report functionality") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Maxim Petrov authored
The paranoidal pointer check in IRQ handler looks very strange - it really protects us only against bogus drivers which request IRQ line with null pointer dev_id. However, the code fragment is incorrect because the dev pointer is used before the actual check which leads to undefined behavior. Remove the check to avoid confusing people with incorrect code. Signed-off-by: Maxim Petrov <mmrmaximuzz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tuong Lien authored
When an application connects to the TIPC topology server and subscribes to some services, a new connection is created along with some objects - 'tipc_subscription' to store related data correspondingly... However, there is one omission in the connection handling that when the connection or application is orderly shutdown (e.g. via SIGQUIT, etc.), the connection is not closed in kernel, the 'tipc_subscription' objects are not freed too. This results in: - The maximum number of subscriptions (65535) will be reached soon, new subscriptions will be rejected; - TIPC module cannot be removed (unless the objects are somehow forced to release first); The commit fixes the issue by closing the connection if the 'recvmsg()' returns '0' i.e. when the peer is shutdown gracefully. It also includes the other unexpected cases. Acked-by: Jon Maloy <jmaloy@redhat.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Prior to 1d27732f ("net: dsa: setup and teardown ports"), we would not treat failures to set-up an user port as fatal, but after this commit we would, which is a regression for some systems where interfaces may be declared in the Device Tree, but the underlying hardware may not be present (pluggable daughter cards for instance). Fixes: 1d27732f ("net: dsa: setup and teardown ports") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 03 May, 2020 3 commits
-
-
Dejin Zheng authored
A call of the function macb_init() can fail in the function fu540_c000_init. The related system resources were not released then. use devm_platform_ioremap_resource() to replace ioremap() to fix it. Fixes: c218ad55 ("macb: Add support for SiFive FU540-C000") Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Yash Shah <yash.shah@sifive.com> Suggested-by: Nicolas Ferre <nicolas.ferre@microchip.com> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Matt Jolly authored
Add support for Dell Wireless 5816e to drivers/net/usb/qmi_wwan.c Signed-off-by: Matt Jolly <Kangie@footclan.ninja> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Do not assume the attribute has the right size. Fixes: aea5f654 ("net/sched: add skbprio scheduler") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 01 May, 2020 2 commits
-
-
Arnd Bergmann authored
The current gcc-10 snapshot produces a false-positive warning: net/core/drop_monitor.c: In function 'trace_drop_common.constprop': cc1: error: writing 8 bytes into a region of size 0 [-Werror=stringop-overflow=] In file included from net/core/drop_monitor.c:23: include/uapi/linux/net_dropmon.h:36:8: note: at offset 0 to object 'entries' with size 4 declared here 36 | __u32 entries; | ^~~~~~~ I reported this in the gcc bugzilla, but in case it does not get fixed in the release, work around it by using a temporary variable. Fixes: 9a8afc8d ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol") Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94881Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yoshiyuki Kurauchi authored
In drivers/net/gtp.c, gtp_genl_dump_pdp() should set NLM_F_MULTI flag since it returns multipart message. This patch adds a new arg "flags" in gtp_genl_fill_info() so that flags can be set by the callers. Signed-off-by: Yoshiyuki Kurauchi <ahochauwaaaaa@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-