- 16 Nov, 2020 14 commits
-
-
Jonathan Cameron authored
This one is a bit interesting because the binding was moved from misc a while back, but the linux support for this device is provided via the ad5446 DAC driver which doesn't currently have a binding. For now, lets just convert this file over, but we may want to think about consolidating this with proper documentation of the bindings for the other parts supported by the ad5446 driver. As Daniel Mack does not seem to have been active since 2015, I've put myself as maintainer of this binding for now. Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201031134110.724233-15-jic23@kernel.org
-
Jonathan Cameron authored
Very simple conversion of this binding from txt to yaml. Signed-off-by:
-
Jonathan Cameron authored
A few tweaks in this conversion. * The example didn't have the I2C address of 4C in the node name so fixed that. * The reference voltage in the txt file is an optional binding, but the driver is making use of it to provide the scaling of the output channels. As such I have made it required going forwards. Signed-off-by:
Sean Nyekjaer <sean@geanix.com> Link: https://lore.kernel.org/r/20201031134110.724233-13-jic23@kernel.org
-
Jonathan Cameron authored
A straight forward conversion of this binding. I have added a maximum SPI frequency from the datasheet. Signed-off-by:
Matt Ranostay <matt.ranostay@konsulko.com> Link: https://lore.kernel.org/r/20201031134110.724233-12-jic23@kernel.org
-
Jonathan Cameron authored
Straight forward conversion from txt to yaml. Signed-off-by:
-
Jonathan Cameron authored
Simple conversion. There hasn't been much activity around this driver for a long time and I don't think I have any up to date contact details for the original authors. As such, I've listed myself as the binding maintainer. More than happy to hand it off to someone more relevant though! Signed-off-by:
-
Jonathan Cameron authored
One quirk in the txt file was that the xclr gpio was specified as xclr-gpio rather than xclr-gpios. I've fixed that in the yaml version. Signed-off-by:
-
Jonathan Cameron authored
One addition here was to put in a 20MHz maximum for the SPI bus as specified in the datasheets of both support parts. Signed-off-by:
-
Jonathan Cameron authored
Simple conversion with a few minor tweaks: * I added 1MHz max for spi-max-frequency * I have give myself as the maintainer. This driver was written by Gregor Boirie but I don't have an up to date email address for Gregor. Signed-off-by:
-
Jonathan Cameron authored
Very simple binding for this i2c device with no properties beyond reg and compatible. Hence doesn't need it's own document. Signed-off-by:
-
Jonathan Cameron authored
The conversion is straight forward, but leaves an open question. The compatible for this device has never had a vendor. Harald Geyer has identified as probably being made by aosong, but we have no current match to any of their more specific part numbers. As such, this is noted in the file but the compatible doesn't include the vendor prefix. Signed-off-by:
Harald Geyer <harald@ccbib.org> Link: https://lore.kernel.org/r/20201031134110.724233-5-jic23@kernel.org
-
Jonathan Cameron authored
Straight forward conversion of this temperature and pressure sensor binding. Signed-off-by:
-
Jonathan Cameron authored
Very simple binding for this i2c device with no properties beyond reg and compatible. Hence doesn't need it's own document. Signed-off-by:
-
Jonathan Cameron authored
Very simple binding for this i2c device with no properties beyond reg and compatible. Hence doesn't need it's own document. Signed-off-by:
-
- 14 Nov, 2020 3 commits
-
-
Alexandru Ardelean authored
This is conversion of the driver to use device-managed functions. The IIO registration and triggered buffer setup both have device-managed versions. The regulator disable needs to be handled via an action_or_reset handler. With these changes, the remove hook is removed, and the error path is cleaned up in probe. Signed-off-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20201113091648.148589-1-alexandru.ardelean@analog.comSigned-off-by:
-
Fabrice Gasnier authored
For proper operation, STM32 ADC should be used with a clock duty cycle of 50%, in the range of 49% to 51%. Depending on the clock tree, divider can be used in case clock duty cycle is out of this range. In case clk_get_scaled_duty_cycle() returns an error, kindly apply a divider by default (don't make the probe fail). Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Link: https://lore.kernel.org/r/1604681846-31234-1-git-send-email-fabrice.gasnier@st.comSigned-off-by:
-
Alexandru Ardelean authored
The aim of this is to improve a bit the organization of ioctl() calls in IIO core. Currently the chardev is split across IIO core sub-modules/files. The main chardev has to be able to handle ioctl() calls, and if we need to add buffer ioctl() calls, this would complicate things. The 'industrialio-core.c' file will provide a 'iio_device_ioctl()' which will iterate over a list of ioctls registered with the IIO device. These can be event ioctl() or buffer ioctl() calls, or something else. Each ioctl() handler will have to return a IIO_IOCTL_UNHANDLED code (which is positive 1), if the ioctl() did not handle the call in any. This eliminates any potential ambiguities about negative error codes, which should fail the call altogether. If any ioctl() returns 0, it was considered that it was serviced successfully and the loop will exit. This change also moves the handling of the IIO_GET_EVENT_FD_IOCTL command inside 'industrialio-event.c', where this is better suited. This patch is a combination of 2 other patches from an older series: Patch 1: iio: core: add simple centralized mechanism for ioctl() handlers Link: https://lore.kernel.org/linux-iio/20200427131100.50845-6-alexandru.ardelean@analog.com/ Patch 2: iio: core: use new common ioctl() mechanism Link: https://lore.kernel.org/linux-iio/20200427131100.50845-7-alexandru.ardelean@analog.com/Signed-off-by:
-
- 08 Nov, 2020 10 commits
-
-
Gene Chen authored
Add MT6360 ADC driver including Charger Current, Voltage, and Temperature. Signed-off-by:
Gene Chen <gene_chen@richtek.com> Link: https://lore.kernel.org/r/1603181267-15610-4-git-send-email-gene.chen.richtek@gmail.comSigned-off-by:
-
Gene Chen authored
Add ABI documentation for mt6360 ADC sysfs interfaces. Signed-off-by:
-
Gene Chen authored
This change adds the binding doc for the MT6360 ADC. Signed-off-by:
-
Olivier Moysan authored
- Remove processing related to DMA in irq handler as this data transfer is managed directly in DMA callback. - Update comment in stm32_adc_set_watermark() function. Signed-off-by:
Olivier Moysan <olivier.moysan@st.com> Reviewed-by:
-
Cristian Pop authored
Optional attribute for better identification of the channels. Signed-off-by:
Cristian Pop <cristian.pop@analog.com> Reviewed-by:
-
Cristian Pop authored
Optional attribute for better identification of the channels. Signed-off-by:
-
Cristian Pop authored
For better identification of the channels. Signed-off-by:
-
Cristian Pop authored
If a label is defined for this channel add that to the channel specific attributes. This is useful for userspace to be able to identify an individual channel. Signed-off-by:
-
Cristian Pop authored
If a label is defined in the device tree for this channel add that to the channel specific attributes. This is useful for userspace to be able to identify an individual channel. Signed-off-by:
-
Jonathan Neuschäfer authored
The colon is missing, which can confuse scripts/parse-maintainers.pl. Signed-off-by:
Jonathan Neuschäfer <j.neuschaefer@gmx.net> Link: https://lore.kernel.org/r/20201108013738.1410528-1-j.neuschaefer@gmx.netSigned-off-by:
-
- 01 Nov, 2020 6 commits
-
-
Tom Rix authored
A break is not needed if it is preceded by a return Signed-off-by:
Tom Rix <trix@redhat.com> Reviewed-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20201019172824.32166-1-trix@redhat.comSigned-off-by:
-
Vaishnav M A authored
Replace of_property_read_u32() with device_property_read_u32(), when reading the amstaos,cover-comp-gain.This opens up the possibility of passing the properties during platform instantiation of the device by a suitable populated struct property_entry. Additionally, a minor change in logic is added to remove the of_node present check. Signed-off-by:
Vaishnav M A <vaishnav@beagleboard.org> Link: https://lore.kernel.org/r/20201018203552.GA816421@ubuntuSigned-off-by:
-
Vaishnav M A authored
Add i2c_device_id table for the vcnl4035 driver, enabling device instantiation using i2c_new_client_device() or from userspace in cases where device-tree based description is not possible now, like device(s) on a gbphy i2c adapter created by greybus. Signed-off-by:
-
Vaishnav M A authored
Add i2c_device_id table for the vl53l0x-i2c driver, helps in device instantiation using i2c_new_client_device() or from userspace in cases where device-tree based description is not possible now, like device(s) on a gbphy i2c adapter created by greybus. Signed-off-by:
-
Tom Rix authored
A semicolon is not needed after a switch statement. Signed-off-by:
-
Tom Rix authored
A semicolon is not needed after a switch statement. Signed-off-by:
-
- 31 Oct, 2020 6 commits
-
-
Mauro Carvalho Chehab authored
A function has a different name between their prototype and its kernel-doc markup. Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/46622c3bdcffb76e79719f0fe5011c2952960b32.1603469755.git.mchehab+huawei@kernel.orgSigned-off-by:
-
Tom Rix authored
A semicolon is not needed after a switch statement. Signed-off-by:
-
Tom Rix authored
A semicolon is not needed after a switch statement. Signed-off-by:
-
Tom Rix authored
A semicolon is not needed after a switch statement. Signed-off-by:
-
Jonathan Cameron authored
Simple conversion. Added the #io-channel-cells optional property to allow for consumer bindings if appropriate on a given board. Signed-off-by:
-
Rui Miguel Silva authored
Convert fxas21002c gyroscope sensor bindings documentation to yaml schema, remove the textual bindings document and update MAINTAINERS entry. Signed-off-by:
Rui Miguel Silva <rmfrfs@gmail.com> Reviewed-by:
-
- 18 Oct, 2020 1 commit
-
-
Fabien Parent authored
Add documentation for the auxadc binding for MT8516 SoC. Signed-off-by:
Fabien Parent <fparent@baylibre.com> Reviewed-by:
Matthias Brugger <matthias.bgg@gmail.com> Acked-by:
-
