Implement support for transferring XDP meta data into skb for
virtio_net driver; before calling into the program, xdp.data_meta points
to xdp.data, where on program return with pass verdict, we call
into skb_metadata_set().

Tested with the script at
https://github.com/higebu/virtio_net-xdp-metadata-test.
Signed-off-by: Yuya Kusakabe <yuya.kusakabe@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/bpf/20200225033212.437563-2-yuya.kusakabe@gmail.com

We do not want to care about the vnet header in receive_small() if XDP
is loaded, since we can not know whether or not the packet is modified
by XDP.

Fixes: f6b10209 ("virtio-net: switch to use build_skb() for small buffer")
Signed-off-by: Yuya Kusakabe <yuya.kusakabe@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/bpf/20200225033212.437563-1-yuya.kusakabe@gmail.com

Due to various bugs in tests clean up code (usually), if host system is
misconfigured, it happens that test_progs will just crash in the middle of
running a test with little to no indication of where and why the crash
happened. For cases where coredump is not readily available (e.g., inside
a CI), it's very helpful to have a stack trace, which lead to crash, to be
printed out. This change adds a signal handler that will capture and print out
symbolized backtrace:

  $ sudo ./test_progs -t mmap
  test_mmap:PASS:skel_open_and_load 0 nsec
  test_mmap:PASS:bss_mmap 0 nsec
  test_mmap:PASS:data_mmap 0 nsec
  Caught signal #11!
  Stack trace:
  ./test_progs(crash_handler+0x18)[0x42a888]
  /lib64/libpthread.so.0(+0xf5d0)[0x7f2aab5175d0]
  ./test_progs(test_mmap+0x3c0)[0x41f0a0]
  ./test_progs(main+0x160)[0x407d10]
  /lib64/libc.so.6(__libc_start_main+0xf5)[0x7f2aab15d3d5]
  ./test_progs[0x407ebc]
  [1]    1988412 segmentation fault (core dumped)  sudo ./test_progs -t mmap

Unfortunately, glibc's symbolization support is unable to symbolize static
functions, only global ones will be present in stack trace. But it's still a
step forward without adding extra libraries to get a better symbolization.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200225000847.3965188-1-andriin@fb.com

Currently we run SYN cookies test for all socket types and mark the test as
skipped if socket type is not compatible. This causes confusion because
skipped test might indicate a problem with the testing environment.

Instead, run the test only for the socket type which supports SYN cookies.

Also, switch to using designated initializers when setting up tests, so
that we can tweak only some test parameters, leaving the rest initialized
to default values.

Fixes: eecd618b ("selftests/bpf: Mark SYN cookie test skipped for UDP sockets")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200224135327.121542-2-jakub@cloudflare.com

SOCKMAP and SOCKHASH map types can be used with reuseport BPF programs but
don't support yet storing UDP sockets. Instead of marking UDP tests with
SOCK{MAP,HASH} as skipped, don't run them at all.

Skipped test might signal that the test environment is not suitable for
running the test, while in reality the functionality is not implemented in
the kernel yet.

Before:

  sh# ./test_progs -t select_reuseport
  …
  #40 select_reuseport:OK
  Summary: 1/126 PASSED, 30 SKIPPED, 0 FAILED

After:

  sh# ./test_progs  -t select_reuseport
  …
  #40 select_reuseport:OK
  Summary: 1/98 PASSED, 2 SKIPPED, 0 FAILED

The remaining two skipped tests are SYN cookies tests, which will be
addressed in the subsequent patch.

Fixes: 11318ba8 ("selftests/bpf: Extend SK_REUSEPORT tests to cover SOCKMAP/SOCKHASH")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200224135327.121542-1-jakub@cloudflare.com

Thomas Gleixner says:

====================
This is the third version of the BPF/RT patch set which makes both coexist
nicely. The long explanation can be found in the cover letter of the V1
submission:

  https://lore.kernel.org/r/20200214133917.304937432@linutronix.de

V2 is here:

  https://lore.kernel.org/r/20200220204517.863202864@linutronix.de

The following changes vs. V2 have been made:

  - Rebased to bpf-next, adjusted to the lock changes in the hashmap code.

  - Split the preallocation enforcement patch for instrumentation type BPF
    programs into two pieces:

    1) Emit a one-time warning on !RT kernels when any instrumentation type
       BPF program uses run-time allocation. Emit also a corresponding
       warning in the verifier log. But allow the program to run for
       backward compatibility sake. After a grace period this should be
       enforced.

    2) On RT reject such programs because on RT the memory allocator cannot
       be called from truly atomic contexts.

  - Fixed the fallout from V2 as reported by Alexei and 0-day

  - Removed the redundant preempt_disable() from trace_call_bpf()

  - Removed the unused export of trace_call_bpf()
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

In a RT kernel down_read_trylock() cannot be used from NMI context and
up_read_non_owner() is another problematic issue.

So in such a configuration, simply elide the annotated stackmap and
just report the raw IPs.

In the longer term, it might be possible to provide a atomic friendly
versions of the page cache traversal which will at least provide the info
if the pages are resident and don't need to be paged in.

[ tglx: Use IS_ENABLED() to avoid the #ifdeffery, fixup the irq work
  	callback and add a comment ]
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145644.708960317@linutronix.de

The LPM trie map cannot be used in contexts like perf, kprobes and tracing
as this map type dynamically allocates memory.

The memory allocation happens with a raw spinlock held which is a truly
spinning lock on a PREEMPT RT enabled kernel which disables preemption and
interrupts.

As RT does not allow memory allocation from such a section for various
reasons, convert the raw spinlock to a regular spinlock.

On a RT enabled kernel these locks are substituted by 'sleeping' spinlocks
which provide the proper protection but keep the code preemptible.

On a non-RT kernel regular spinlocks map to raw spinlocks, i.e. this does
not cause any functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145644.602129531@linutronix.de

PREEMPT_RT forbids certain operations like memory allocations (even with
GFP_ATOMIC) from atomic contexts. This is required because even with
GFP_ATOMIC the memory allocator calls into code pathes which acquire locks
with long held lock sections. To ensure the deterministic behaviour these
locks are regular spinlocks, which are converted to 'sleepable' spinlocks
on RT. The only true atomic contexts on an RT kernel are the low level
hardware handling, scheduling, low level interrupt handling, NMIs etc. None
of these contexts should ever do memory allocations.

As regular device interrupt handlers and soft interrupts are forced into
thread context, the existing code which does
  spin_lock*(); alloc(GPF_ATOMIC); spin_unlock*();
just works.

In theory the BPF locks could be converted to regular spinlocks as well,
but the bucket locks and percpu_freelist locks can be taken from arbitrary
contexts (perf, kprobes, tracepoints) which are required to be atomic
contexts even on RT. These mechanisms require preallocated maps, so there
is no need to invoke memory allocations within the lock held sections.

BPF maps which need dynamic allocation are only used from (forced) thread
context on RT and can therefore use regular spinlocks which in turn allows
to invoke memory allocations from the lock held section.

To achieve this make the hash bucket lock a union of a raw and a regular
spinlock and initialize and lock/unlock either the raw spinlock for
preallocated maps or the regular variant for maps which require memory
allocations.

On a non RT kernel this distinction is neither possible nor required.
spinlock maps to raw_spinlock and the extra code and conditional is
optimized out by the compiler. No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145644.509685912@linutronix.de

As a preparation for making the BPF locking RT friendly, factor out the
hash bucket lock operations into inline functions. This allows to do the
necessary RT modification in one place instead of sprinkling it all over
the place. No functional change.

The now unused htab argument of the lock/unlock functions will be used in
the next step which adds PREEMPT_RT support.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145644.420416916@linutronix.de

The required protection is that the caller cannot be migrated to a
different CPU as these functions end up in places which take either a hash
bucket lock or might trigger a kprobe inside the memory allocator. Both
scenarios can lead to deadlocks. The deadlock prevention is per CPU by
incrementing a per CPU variable which temporarily blocks the invocation of
BPF programs from perf and kprobes.

Replace the open coded preempt_[dis|en]able and __this_cpu_[inc|dec] pairs
with the new helper functions. These functions are already prepared to make
BPF work on PREEMPT_RT enabled kernels. No functional change for !RT
kernels.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145644.317843926@linutronix.de

The required protection is that the caller cannot be migrated to a
different CPU as these places take either a hash bucket lock or might
trigger a kprobe inside the memory allocator. Both scenarios can lead to
deadlocks. The deadlock prevention is per CPU by incrementing a per CPU
variable which temporarily blocks the invocation of BPF programs from perf
and kprobes.

Replace the open coded preempt_disable/enable() and this_cpu_inc/dec()
pairs with the new recursion prevention helpers to prepare BPF to work on
PREEMPT_RT enabled kernels. On a non-RT kernel the migrate disable/enable
in the helpers map to preempt_disable/enable(), i.e. no functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145644.211208533@linutronix.de

The places which need to prevent the execution of trace type BPF programs
to prevent deadlocks on the hash bucket lock do this open coded.

Provide two inline functions, bpf_disable/enable_instrumentation() to
replace these open coded protection constructs.

Use migrate_disable/enable() instead of preempt_disable/enable() right away
so this works on RT enabled kernels. On a !RT kernel migrate_disable /
enable() are mapped to preempt_disable/enable().

These helpers use this_cpu_inc/dec() instead of __this_cpu_inc/dec() on an
RT enabled kernel because migrate disabled regions are preemptible and
preemption might hit in the middle of a RMW operation which can lead to
inconsistent state.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145644.103910133@linutronix.de

Replace the preemption disable/enable with migrate_disable/enable() to
reflect the actual requirement and to allow PREEMPT_RT to substitute it
with an actual migration disable mechanism which does not disable
preemption.

Including the code paths that go via __bpf_prog_run_save_cb().
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145643.998293311@linutronix.de

Instead of preemption disable/enable to reflect the purpose. This allows
PREEMPT_RT to substitute it with an actual migration disable
implementation. On non RT kernels this is still mapped to
preempt_disable/enable().
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145643.891428873@linutronix.de

Replace the preemption disable/enable with migrate_disable/enable() to
reflect the actual requirement and to allow PREEMPT_RT to substitute it
with an actual migration disable mechanism which does not disable
preemption.

[ tglx: Switched it over to migrate disable ]
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145643.785306549@linutronix.de

All of these cases are strictly of the form:

	preempt_disable();
	BPF_PROG_RUN(...);
	preempt_enable();

Replace this with bpf_prog_run_pin_on_cpu() which wraps BPF_PROG_RUN()
with:

	migrate_disable();
	BPF_PROG_RUN(...);
	migrate_enable();

On non RT enabled kernels this maps to preempt_disable/enable() and on RT
enabled kernels this solely prevents migration, which is sufficient as
there is no requirement to prevent reentrancy to any BPF program from a
preempting task. The only requirement is that the program stays on the same
CPU.

Therefore, this is a trivially correct transformation.

The seccomp loop does not need protection over the loop. It only needs
protection per BPF filter program

[ tglx: Converted to bpf_prog_run_pin_on_cpu() ]
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145643.691493094@linutronix.de

As already discussed in the previous change which introduced
BPF_RUN_PROG_PIN_ON_CPU() BPF only requires to disable migration to
guarantee per CPUness.

If RT substitutes the preempt disable based migration protection then the
cant_sleep() check will obviously trigger as preemption is not disabled.

Replace it by cant_migrate() which maps to cant_sleep() on a non RT kernel
and will verify that migration is disabled on a full RT kernel.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145643.583038889@linutronix.de

BPF programs require to run on one CPU to completion as they use per CPU
storage, but according to Alexei they don't need reentrancy protection as
obviously BPF programs running in thread context can always be 'preempted'
by hard and soft interrupts and instrumentation and the same program can
run concurrently on a different CPU.

The currently used mechanism to ensure CPUness is to wrap the invocation
into a preempt_disable/enable() pair. Disabling preemption is also
disabling migration for a task.

preempt_disable/enable() is used because there is no explicit way to
reliably disable only migration.

Provide a separate macro to invoke a BPF program which can be used in
migrateable task context.

It wraps BPF_PROG_RUN() in a migrate_disable/enable() pair which maps on
non RT enabled kernels to preempt_disable/enable(). On RT enabled kernels
this merely disables migration. Both methods ensure that the invoked BPF
program runs on one CPU to completion.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145643.474592620@linutronix.de

pcpu_freelist_populate() is disabling interrupts and then iterates over the
possible CPUs. The reason why this disables interrupts is to silence
lockdep because the invoked ___pcpu_freelist_push() takes spin locks.

Neither the interrupt disabling nor the locking are required in this
function because it's called during initialization and the resulting map is
not yet visible to anything.

Split out the actual push assignement into an inline, call it from the loop
and remove the interrupt disable.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145643.365930116@linutronix.de

If an element is freed via RCU then recursion into BPF instrumentation
functions is not a concern. The element is already detached from the map
and the RCU callback does not hold any locks on which a kprobe, perf event
or tracepoint attached BPF program could deadlock.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145643.259118710@linutronix.de

The BPF invocation from the perf event overflow handler does not require to
disable preemption because this is called from NMI or at least hard
interrupt context which is already non-preemptible.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145643.151953573@linutronix.de

Similar to __bpf_trace_run this is redundant because __bpf_trace_run() is
invoked from a trace point via __DO_TRACE() which already disables
preemption _before_ invoking any of the functions which are attached to a
trace point.

Remove it and add a cant_sleep() check.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145643.059995527@linutronix.de

trace_call_bpf() no longer disables preemption on its own.
All callers of this function has to do it explicitly.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>

All callers are built in. No point to export this.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

__bpf_trace_run() disables preemption around the BPF_PROG_RUN() invocation.

This is redundant because __bpf_trace_run() is invoked from a trace point
via __DO_TRACE() which already disables preemption _before_ invoking any of
the functions which are attached to a trace point.

Remove it and add a cant_sleep() check.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145642.847220186@linutronix.de

The comment where the bucket lock is acquired says:

  /* bpf_map_update_elem() can be called in_irq() */

which is not really helpful and aside of that it does not explain the
subtle details of the hash bucket locks expecially in the context of BPF
and perf, kprobes and tracing.

Add a comment at the top of the file which explains the protection scopes
and the details how potential deadlocks are prevented.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145642.755793061@linutronix.de

Aside of the general unsafety of run-time map allocation for
instrumentation type programs RT enabled kernels have another constraint:

The instrumentation programs are invoked with preemption disabled, but the
memory allocator spinlocks cannot be acquired in atomic context because
they are converted to 'sleeping' spinlocks on RT.

Therefore enforce map preallocation for these programs types when RT is
enabled.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145642.648784007@linutronix.de

The assumption that only programs attached to perf NMI events can deadlock
on memory allocators is wrong. Assume the following simplified callchain:

 kmalloc() from regular non BPF context
  cache empty
   freelist empty
    lock(zone->lock);
     tracepoint or kprobe
      BPF()
       update_elem()
        lock(bucket)
          kmalloc()
           cache empty
            freelist empty
             lock(zone->lock);  <- DEADLOCK

There are other ways which do not involve locking to create wreckage:

 kmalloc() from regular non BPF context
  local_irq_save();
   ...
    obj = slab_first();
     kprobe()
      BPF()
       update_elem()
        lock(bucket)
         kmalloc()
          local_irq_save();
           ...
            obj = slab_first(); <- Same object as above ...

So preallocation _must_ be enforced for all variants of intrusive
instrumentation.

Unfortunately immediate enforcement would break backwards compatibility, so
for now such programs still are allowed to run, but a one time warning is
emitted in dmesg and the verifier emits a warning in the verifier log as
well so developers are made aware about this and can fix their programs
before the enforcement becomes mandatory.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145642.540542802@linutronix.de

Merge tag 'sched-for-bpf-2020-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into bpf-next

Two migrate disable related stubs for BPF to base the RT patches on

Saeed Mahameed says:

====================
mlxfw: Improve error reporting and FW reactivate support

This patchset improves mlxfw error reporting to netlink and to
kernel log.

V2:
 - Use proper err codes, EBUSY/EIO instead of EALREADY/EREMOTEIO
 - Fix typo.

From Eran and me.

1) patch #1, Make mlxfw/mlxsw fw flash devlink status notify generic,
   and enable it for mlx5.

2) patches #2..#5 are improving mlxfw flash error messages by
reporting detailed mlxfw FSM error messages to netlink and kernel log.

3) patches #6,7 From Eran: Add FW reactivate flow to  mlxfw and mlx5
====================
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for fsm reactivate via MIRC (Management Image Re-activation
Control) set and query commands.
For re-activation flow, driver shall first run MIRC set, and then wait
until FW is done (via querying MIRC status).
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Expose fsm_reactivate callback to the mlxfw_dev_ops struct. FSM reactivate
is needed before flashing the new image in order to flush the old flashed
but not running firmware image.

In case mlxfw_dev do not support the reactivation, this step will be
skipped. But if later image flash will fail, a hint will be provided by
the extack to advise the user that the failure might be related to it.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of always calling both mlxfw_err and NL_SET_ERR_MSG_MOD with the
same message, use the dedicated macro instead.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce mlxfw_{info, err, dbg} macros and make them call corresponding
dev_* macros, then convert all instances of pr_* to mlxfw_*.

This will allow printing the device name mlxfw is operating on.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure mlxfw_firmware_flash reports a detailed user readable error
message in every possible error path, basically every time
mlxfw_dev->ops->*() is called and an error is returned, or when image
initialization is failed.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Report unique and standard error codes corresponding to the specific
FW flash error. In addition, add a more detailed error messages to
netlink.

Before:
$ devlink dev flash pci/0000:05:00.0 file ...
Error: mlxfw: Firmware flash failed.
devlink answers: Invalid argument

After:
$ devlink dev flash pci/0000:05:00.0 file ...
Error: mlxfw: Firmware flash failed: pending reset.
devlink answers: Device busy
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

FW flash status notify is currently implemented via a callback to the
caller mlx module, and all it is doing is to call
devlink_flash_update_status_notify with the specific module devlink
instance.

Instead of repeating the whole process for all mlx modules and
re-implement the status_notify callback again and again. Just provide the
devlink instance as part of mlxfw_dev when calling mlxfw_firmware_flash
and let mlxfw do the devlink status updates directly.

This will be very useful for adding status notify support to mlx5, as
already done in this patch, with a simple one line of just providing the
devlink instance to mlxfw_firmware_flash.

mlxfw now depends on NET_DEVLINK as all other mlx modules.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf-next 2020-02-21

The following pull-request contains BPF updates for your *net-next* tree.

We've added 25 non-merge commits during the last 4 day(s) which contain
a total of 33 files changed, 2433 insertions(+), 161 deletions(-).

The main changes are:

1) Allow for adding TCP listen sockets into sock_map/hash so they can be used
   with reuseport BPF programs, from Jakub Sitnicki.

2) Add a new bpf_program__set_attach_target() helper for adding libbpf support
   to specify the tracepoint/function dynamically, from Eelco Chaudron.

3) Add bpf_read_branch_records() BPF helper which helps use cases like profile
   guided optimizations, from Daniel Xu.

4) Enable bpf_perf_event_read_value() in all tracing programs, from Song Liu.

5) Relax BTF mandatory check if only used for libbpf itself e.g. to process
   BTF defined maps, from Andrii Nakryiko.

6) Move BPF selftests -mcpu compilation attribute from 'probe' to 'v3' as it has
   been observed that former fails in envs with low memlock, from Yonghong Song.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Conflict resolution of ice_virtchnl_pf.c based upon work by
Stephen Rothwell.
Signed-off-by: David S. Miller <davem@davemloft.net>