- 04 Aug, 2017 10 commits
-
-
Ard Biesheuvel authored
The arm64 kernel will shortly disallow nested kernel mode NEON. So honour this in the ARMv8 Crypto Extensions implementation of CCM-AES, and fall back to a scalar implementation using the generic crypto helpers for AES, XOR and incrementing the CTR counter. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Ard Biesheuvel authored
The arm64 kernel will shortly disallow nested kernel mode NEON, so add a fallback to scalar code that can be invoked in that case. Signed-off-by:
-
Ard Biesheuvel authored
In order to be able to reuse the generic AES code as a fallback for situations where the NEON may not be used, update the key handling to match the byte order of the generic code: it stores round keys as sequences of 32-bit quantities rather than streams of bytes, and so our code needs to be updated to reflect that. Signed-off-by:
-
Ard Biesheuvel authored
The arm64 kernel will shortly disallow nested kernel mode NEON, so add a fallback to scalar code that can be invoked in that case. Signed-off-by:
-
Ard Biesheuvel authored
The arm64 kernel will shortly disallow nested kernel mode NEON, so add a fallback to scalar C code that can be invoked in that case. Signed-off-by:
-
Ard Biesheuvel authored
The arm64 kernel will shortly disallow nested kernel mode NEON, so add a fallback to scalar C code that can be invoked in that case. Signed-off-by:
-
Ard Biesheuvel authored
The arm64 kernel will shortly disallow nested kernel mode NEON, so add a fallback to scalar C code that can be invoked in that case. Signed-off-by:
-
Ard Biesheuvel authored
The arm64 kernel will shortly disallow nested kernel mode NEON, so add a fallback to scalar C code that can be invoked in that case. Signed-off-by:
-
Ard Biesheuvel authored
There are quite a number of occurrences in the kernel of the pattern if (dst != src) memcpy(dst, src, walk.total % AES_BLOCK_SIZE); crypto_xor(dst, final, walk.total % AES_BLOCK_SIZE); or crypto_xor(keystream, src, nbytes); memcpy(dst, keystream, nbytes); where crypto_xor() is preceded or followed by a memcpy() invocation that is only there because crypto_xor() uses its output parameter as one of the inputs. To avoid having to add new instances of this pattern in the arm64 code, which will be refactored to implement non-SIMD fallbacks, add an alternative implementation called crypto_xor_cpy(), taking separate input and output arguments. This removes the need for the separate memcpy(). Signed-off-by: -
Ard Biesheuvel authored
In preparation of introducing crypto_xor_cpy(), which will use separate operands for input and output, modify the __crypto_xor() implementation, which it will share with the existing crypto_xor(), which provides the actual functionality when not using the inline version. Signed-off-by:
-
- 03 Aug, 2017 20 commits
-
-
Zain Wang authored
Sometime we would unable to dequeue the crypto request, in this case, we should finish crypto and return the err code. Signed-off-by:
zain wang <wzz@rock-chips.com> Signed-off-by:
-
Zain Wang authored
It's illegal to call the completion function from hardirq context, it will cause runtime tests to fail. Let's build a new task (done_task) for moving update operation from hardirq context. Signed-off-by:
-
Martin Kaiser authored
The driver is ported from Freescale's Linux git and can be found in the vendor/freescale/imx_2.6.35_maintain branch. The driver supports both RNG version C that's part of some Freescale i.MX3 SoCs and version B that is available on i.MX2x chipsets. Signed-off-by:
Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by:
Martin Kaiser <martin@kaiser.cx> Reviewed-by:
PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Signed-off-by:
-
Steffen Trumtrar authored
Add binding documentation for the Freescale RNGC found on some i.MX2/3 SoCs. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
PrasannaKumar Muralidharan authored
Modify Kconfig help text to reflect the fact that random data from hwrng is fed into kernel random number generator's entropy pool. Signed-off-by:
-
Ard Biesheuvel authored
The scompress code allocates 2 x 128 KB of scratch buffers for each CPU, so that clients of the async API can use synchronous implementations even from atomic context. However, on systems such as Cavium Thunderx (which has 96 cores), this adds up to a non-negligible 24 MB. Also, 32-bit systems may prefer to use their precious vmalloc space for other things,especially since there don't appear to be any clients for the async compression API yet. So let's defer allocation of the scratch buffers until the first time we allocate an acompress cipher based on an scompress implementation. Signed-off-by:
-
Ard Biesheuvel authored
When allocating the per-CPU scratch buffers, we allocate the source and destination buffers separately, but bail immediately if the second allocation fails, without freeing the first one. Fix that. Signed-off-by:
-
Ard Biesheuvel authored
Due to the use of per-CPU buffers, scomp_acomp_comp_decomp() executes with preemption disabled, and so whether the CRYPTO_TFM_REQ_MAY_SLEEP flag is set is irrelevant, since we cannot sleep anyway. So disregard the flag, and use GFP_ATOMIC unconditionally. Cc: <stable@vger.kernel.org> # v4.10+ Signed-off-by:
-
raveendra padasalagi authored
Enhance code to generically support cases where DMA rings are greater than or equal to number of SPU engines. New hardware has underlying DMA engine-FlexRM with 32 rings which can be used to communicate to any of the available 10 SPU engines. Signed-off-by:
Raveendra Padasalagi <raveendra.padasalagi@broadcom.com> Reviewed-by:
Scott Branden <scott.branden@broadcom.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Tudor-Dan Ambarus authored
static checker warning: drivers/crypto/atmel-ecc.c:281 atmel_ecdh_done() warn: assigning (-22) to unsigned variable 'status' Similar warning can be raised in atmel_ecc_work_handler() when atmel_ecc_send_receive() returns an error. Fix this too. Reported-by:Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by:
-
Tudor-Dan Ambarus authored
ecdh_ctx contained static allocated data for the shared secret and public key. The shared secret and the public key were doomed to concurrency issues because they could be shared by multiple crypto requests. The concurrency is fixed by replacing per-tfm shared secret and public key with per-request dynamically allocated shared secret and public key. Signed-off-by:
-
Brijesh Singh authored
commit 720419f0 ("crypto: ccp - Introduce the AMD Secure Processor device") moved the module registeration from ccp-dev.c to sp-dev.c but patch missed removing the module version and author entry from ccp-dev.c. It causes the below warning during boot when CONFIG_CRYPTO_DEV_SP_CCP=y and CONFIG_CRYPTO_DEV_CCP_CRYPTO=y is set. [ 0.187825] sysfs: cannot create duplicate filename '/module/ccp/version' [ 0.187825] sysfs: cannot create duplicate filename '/module/ccp/version' Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gary R Hook <gary.hook@amd.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
Brijesh Singh <brijesh.singh@amd.com> Signed-off-by:
-
Horia Geantă authored
Remove xts(aes) speed tests with 2 x 192-bit keys, since implementations adhering strictly to IEEE 1619-2007 standard cannot cope with key sizes other than 2 x 128, 2 x 256 bits - i.e. AES-XTS-{128,256}: [...] tcrypt: test 5 (384 bit key, 16 byte blocks): caam_jr 8020000.jr: key size mismatch tcrypt: setkey() failed flags=200000 [...] Signed-off-by:Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
-
Colin Ian King authored
Functions atmel_ecc_i2c_client_alloc and atmel_ecc_i2c_client_free are local to the source and no not need to be in the global scope. Make them static. Cleans up sparse warnings: symbol 'atmel_ecc_i2c_client_alloc' was not declared. Should it be static? symbol 'atmel_ecc_i2c_client_free' was not declared. Should it be static? Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
-
Gustavo A. R. Silva authored
Remove unnecessary static on local variable hdev. Such variable is initialized before being used, on every execution path throughout the function. The static has no benefit and, removing it reduces the object file size. This issue was detected using Coccinelle and the following semantic patch: https://github.com/GustavoARSilva/coccinelle/blob/master/static/static_unused.cocci In the following log you can see a significant difference in the object file size. This log is the output of the size command, before and after the code change: before: text data bss dec hex filename 14842 6464 128 21434 53ba drivers/crypto/img-hash.o after: text data bss dec hex filename 14789 6376 64 21229 52ed drivers/crypto/img-hash.o Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Gustavo A. R. Silva authored
Remove unnecessary static on local variable tdes_dd. Such variable is initialized before being used, on every execution path throughout the function. The static has no benefit and, removing it reduces the object file size. This issue was detected using Coccinelle and the following semantic patch: https://github.com/GustavoARSilva/coccinelle/blob/master/static/static_unused.cocci In the following log you can see a significant difference in the object file size. This log is the output of the size command, before and after the code change: before: text data bss dec hex filename 17079 8704 128 25911 6537 drivers/crypto/atmel-tdes.o after: text data bss dec hex filename 17039 8616 64 25719 6477 drivers/crypto/atmel-tdes.o Signed-off-by:
-
Gustavo A. R. Silva authored
Remove unnecessary static on local variable sha_dd. Such variable is initialized before being used, on every execution path throughout the function. The static has no benefit and, removing it reduces the object file size. This issue was detected using Coccinelle and the following semantic patch: https://github.com/GustavoARSilva/coccinelle/blob/master/static/static_unused.cocci In the following log you can see a significant difference in the object file size. This log is the output of the size command, before and after the code change: before: text data bss dec hex filename 30005 10264 128 40397 9dcd drivers/crypto/atmel-sha.o after: text data bss dec hex filename 29934 10208 64 40206 9d0e drivers/crypto/atmel-sha.o Signed-off-by:
-
Gustavo A. R. Silva authored
Remove unnecessary static on local variable dd. Such variable is initialized before being used, on every execution path throughout the function. The static has no benefit and, removing it reduces the object file size. This issue was detected using Coccinelle and the following semantic patch: https://github.com/GustavoARSilva/coccinelle/blob/master/static/static_unused.cocci In the following log you can see a difference in the object file size. This log is the output of the size command, before and after the code change: before: text data bss dec hex filename 26135 11944 128 38207 953f drivers/crypto/omap-sham.o after: text data bss dec hex filename 26084 11856 64 38004 9474 drivers/crypto/omap-sham.o Signed-off-by:
-
Rob Herring authored
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by:
-
Horia Geantă authored
Add support for using the caam/jr backend on DPAA2-based SoCs. These have some particularities we have to account for: -HW S/G format is different -Management Complex (MC) firmware initializes / manages (partially) the CAAM block: MCFGR, QI enablement in QICTL, RNG Signed-off-by:
-
- 28 Jul, 2017 10 commits
-
-
Gary R Hook authored
A version 5 CCP can handle an RSA modulus up to 16k bits. Signed-off-by:
Gary R Hook <gary.hook@amd.com> Signed-off-by:
-
Gary R Hook authored
Wire up the CCP as an RSA cipher provider. Signed-off-by:
-
Gary R Hook authored
Signed-off-by:
-
Gary R Hook authored
Version 5 devices have requirements for buffer lengths, as well as parameter format (e.g. bits vs. bytes). Fix the base CCP driver code to meet requirements all supported versions. Signed-off-by:
-
Gary R Hook authored
Some updates this year have not had copyright dates changed in modified files. Correct this for 2017. Signed-off-by:
-
Jason A. Donenfeld authored
Otherwise, we might be seeding the RNG using bad randomness, which is dangerous. The one use of this function from within the kernel -- not from userspace -- is being removed (keys/big_key), so that call site isn't relevant in assessing this. Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
lionel.debieve@st.com authored
This module register a HASH module that support multiples algorithms: MD5, SHA1, SHA224, SHA256. It includes the support of HMAC hardware processing corresponding to the supported algorithms. DMA or IRQ mode are used depending on data length. Signed-off-by:
Lionel Debieve <lionel.debieve@st.com> Signed-off-by:
-
lionel.debieve@st.com authored
This adds documentation of device tree bindings for the STM32 HASH controller. Signed-off-by:
-
lionel.debieve@st.com authored
The complete stm32 module is rename as crypto in order to use generic naming Signed-off-by:
Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by:
-
lionel.debieve@st.com authored
Use the correct unregister_shashes function to to remove the registered algo Signed-off-by:
-
