- 20 Oct, 2022 1 commit
-
-
Alex Deucher authored
Commit 8795e182 ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") uncovered a bug in amdgpu that required a reordering of the driver init sequence to avoid accessing a special register on the GPU before it was properly set up leading to an PCI AER error. This reordering uncovered a different hw programming ordering dependency in some APUs where the SDMA doorbells need to be programmed before the GFX doorbells. To fix this, move the SDMA doorbell programming back into the soc15 common code, but use the actual doorbell range values directly rather than the values stored in the ring structure since those will not be initialized at this point. This is a partial revert, but with the doorbell assignment fixed so the proper doorbell index is set before it's used. Fixes: e3163bc8 ("drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vega") Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: skhan@linuxfoundation.org Cc: stable@vger.kernel.org
-
- 19 Oct, 2022 25 commits
-
-
Arunpravin Paneer Selvam authored
A user reported a bug on CAPE VERDE system where uvd_v3_1 IP component failed to initialize as there is an issue with BO move code from one memory to other. In function amdgpu_mem_visible() called by amdgpu_bo_move(), when there are no blocks to compare or if we have a single block then break the loop. Fixes: 312b4dc1 ("drm/amdgpu: Fix VRAM BO swap issue") Signed-off-by:
Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
YuBiao Wang authored
[Why] If mes is not dequeued during fini, mes will be in an uncleaned state during reload, then mes couldn't receive some commands which leads to reload failure. [How] Perform MES dequeue via MMIO after all the unmap jobs are done by mes and before kiq fini. v2: Move the dequeue operation inside kiq_hw_fini. Signed-off-by:
YuBiao Wang <YuBiao.Wang@amd.com> Reviewed-by:
Jack Xiao <Jack.Xiao@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Kenneth Feng authored
enable thermal alert on smu_v13_0_10 Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Yifan Zha authored
[Why] L1 blocks most of GC registers accessing by MMIO. [How] Use RLCG interface to program GC registers under SRIOV VF in full access time. Signed-off-by:
Yifan Zha <Yifan.Zha@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Nathan Chancellor authored
When booting a kernel compiled with CONFIG_CFI_CLANG on a machine with an RX 6700 XT, there is a CFI failure in kfd_destroy_mqd_cp(): [ 12.894543] CFI failure at kfd_destroy_mqd_cp+0x2a/0x40 [amdgpu] (target: hqd_destroy_v10_3+0x0/0x260 [amdgpu]; expected type: 0x8594d794) Clang's kernel Control Flow Integrity (kCFI) makes sure that all indirect call targets have a type that exactly matches the function pointer prototype. In this case, hqd_destroy()'s third parameter, reset_type, should have a type of 'uint32_t' but every implementation of this callback has a third parameter type of 'enum kfd_preempt_type'. Update the function pointer prototype to match reality so that there is no more CFI violation. Link: https://github.com/ClangBuiltLinux/linux/issues/1738Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Guenter Roeck authored
Building 32-bit images may fail with the following error. drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_util_32.c: In function ‘dml32_UseMinimumDCFCLK’: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_util_32.c:3142:1: error: the frame size of 1096 bytes is larger than 1024 bytes This is seen when building i386:allmodconfig with any of the following compilers. gcc (Debian 12.2.0-3) 12.2.0 gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0 The problem is not seen if the compiler supports GCC_PLUGIN_LATENT_ENTROPY because in that case CONFIG_FRAME_WARN is already set to 2048 even for 32-bit builds. dml32_UseMinimumDCFCLK() was introduced with commit dda4fb85 ("drm/amd/display: DML changes for DCN32/321"). It declares a large number of local variables. Increase the frame size for the affected file to 2048, similar to other files in the same directory, to enable 32-bit build tests with affected compilers. Fixes: dda4fb85 ("drm/amd/display: DML changes for DCN32/321") Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reported-by:
Łukasz Bartosik <ukaszb@google.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Tim Huang authored
The pmfw has changed the driver interface version, so keep same with the fw. Signed-off-by:
Tim Huang <tim.huang@amd.com> Reviewed-by:
Mario Limonciello <mario.limonciello@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Tim Huang authored
Update the SMU driver interface version to V7. Signed-off-by:
Tim Huang <tim.huang@amd.com> Reviewed-by:
Mario Limonciello <mario.limonciello@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
ZhenGuo Yin authored
[Why] In SRIOV multi-vf, dpm is always disabled, and pm_attr_list won't be initialized. There will be a NULL pointer call trace after removing the dpm check condition in amdgpu_pm_sysfs_fini. BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:amdgpu_device_attr_remove_groups+0x20/0x90 [amdgpu] Call Trace: <TASK> amdgpu_pm_sysfs_fini+0x2f/0x40 [amdgpu] amdgpu_device_fini_hw+0xdf/0x290 [amdgpu] [How] List pm_attr_list should be initialized when dpm is disabled. Fixes: a6ad27ce ("drm/amd/pm: Remove redundant check condition") Signed-off-by:
ZhenGuo Yin <zhenguo.yin@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Evan Quan authored
Suggested by PMFW team and same as what did for gfxoff feature. This can address some Mode1Reset failures observed on SMU13.0.0. Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Evan Quan authored
Fulfill the functionality for cstate control. Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Evan Quan authored
Fulfill the functionality for cstate control. Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
YiPeng Chai authored
V2: Add sriov vf ras support in amdgpu_ras_asic_supported. Signed-off-by:
YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
YiPeng Chai authored
V1: Enable ras support for CHIP_IP_DISCOVERY asic type. V2: 1. Change commit comment. 2. Enable ras support for mp0 v13_0_0 and v13_0_10. Signed-off-by:
YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
YiPeng Chai authored
Enable gmc soft reset on gmc_v11_0_3. Signed-off-by:
YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Likun Gao authored
Temporary disable mes self teset for gc 11.0.3. Signed-off-by:
Likun Gao <Likun.Gao@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Kenneth Feng authored
skip loading pptable from driver on secure board since it's loaded from psp. Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Reviewed-by:
Guan Yu <Guan.Yu@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Kenneth Feng authored
enable gfx clock gating features on smu_v13_0_10 Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Reviewed-by:
Jack Gui <Jack.Gui@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Kenneth Feng authored
remove the pptable id override on smu_v13_0_10, and the id is fetched from vbios now. Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Reviewed-by:
Likun Gao <Likun.Gao@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Kenneth Feng authored
temporarily disable thermal alert on smu_v13_0_10 due to kfd test fail. will enable it again after confirming the thermal hardware setting. Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Asher Song authored
This reverts commit 16fb4dca. Unfortunately, that commit causes fan monitors can't be read and written properly. Fixes: 16fb4dca ("drm/amdgpu: getting fan speed pwm for vega10 properly") Signed-off-by:
Asher Song <Asher.Song@amd.com> Reviewed-by:
Guchun Chen <guchun.chen@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Victor Zhao authored
- refactor mode2 on v11.0.7 to align with aldebaran - comment out using mode2 reset as default for now, will introduce another controller to replace previous reset_level_mask v2: squash in unused variable removal (Alex) Signed-off-by:
Victor Zhao <Victor.Zhao@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Victor Zhao authored
This reverts commit dac6b808. This commit reverted the AMDGPU_SKIP_MODE2_RESET as it conflicts with the original design of reset handler. Will redesign it. Fixes: dac6b808 ("drm/amdgpu: let mode2 reset fallback to default when failure") Signed-off-by:
Victor Zhao <Victor.Zhao@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Victor Zhao authored
This reverts commit 5bd8d53f. This commit breaks the reset logic for aldebaran, revert it for now. Will move the mask inside the reset handler. Fixes: 5bd8d53f ("drm/amdgpu: add debugfs amdgpu_reset_level") Signed-off-by:
Victor Zhao <Victor.Zhao@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Danijel Slivka authored
For asic with VF MMIO access protection avoid using CPU for VM table updates. CPU pagetable updates have issues with HDP flush as VF MMIO access protection blocks write to mmBIF_BX_DEV0_EPF0_VF0_HDP_MEM_COHERENCY_FLUSH_CNTL register during sriov runtime. v3: introduce virtualization capability flag AMDGPU_VF_MMIO_ACCESS_PROTECT which indicates that VF MMIO write access is not allowed in sriov runtime Signed-off-by:
Danijel Slivka <danijel.slivka@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
- 16 Oct, 2022 10 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/crng/randomLinus Torvalds authored
Pull more random number generator updates from Jason Donenfeld: "This time with some large scale treewide cleanups. The intent of this pull is to clean up the way callers fetch random integers. The current rules for doing this right are: - If you want a secure or an insecure random u64, use get_random_u64() - If you want a secure or an insecure random u32, use get_random_u32() The old function prandom_u32() has been deprecated for a while now and is just a wrapper around get_random_u32(). Same for get_random_int(). - If you want a secure or an insecure random u16, use get_random_u16() - If you want a secure or an insecure random u8, use get_random_u8() - If you want secure or insecure random bytes, use get_random_bytes(). The old function prandom_bytes() has been deprecated for a while now and has long been a wrapper around get_random_bytes() - If you want a non-uniform random u32, u16, or u8 bounded by a certain open interval maximum, use prandom_u32_max() I say "non-uniform", because it doesn't do any rejection sampling or divisions. Hence, it stays within the prandom_*() namespace, not the get_random_*() namespace. I'm currently investigating a "uniform" function for 6.2. We'll see what comes of that. By applying these rules uniformly, we get several benefits: - By using prandom_u32_max() with an upper-bound that the compiler can prove at compile-time is ≤65536 or ≤256, internally get_random_u16() or get_random_u8() is used, which wastes fewer batched random bytes, and hence has higher throughput. - By using prandom_u32_max() instead of %, when the upper-bound is not a constant, division is still avoided, because prandom_u32_max() uses a faster multiplication-based trick instead. - By using get_random_u16() or get_random_u8() in cases where the return value is intended to indeed be a u16 or a u8, we waste fewer batched random bytes, and hence have higher throughput. This series was originally done by hand while I was on an airplane without Internet. Later, Kees and I worked on retroactively figuring out what could be done with Coccinelle and what had to be done manually, and then we split things up based on that. So while this touches a lot of files, the actual amount of code that's hand fiddled is comfortably small" * tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: prandom: remove unused functions treewide: use get_random_bytes() when possible treewide: use get_random_u32() when possible treewide: use get_random_{u8,u16}() when possible, part 2 treewide: use get_random_{u8,u16}() when possible, part 1 treewide: use prandom_u32_max() when possible, part 2 treewide: use prandom_u32_max() when possible, part 1
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v6.1-2-2022-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Use BPF CO-RE (Compile Once, Run Everywhere) to support old kernels when using bperf (perf BPF based counters) with cgroups. - Support HiSilicon PCIe Performance Monitoring Unit (PMU), that monitors bandwidth, latency, bus utilization and buffer occupancy. Documented in Documentation/admin-guide/perf/hisi-pcie-pmu.rst. - User space tasks can migrate between CPUs, so when tracing selected CPUs, system-wide sideband is still needed, fix it in the setup of Intel PT on hybrid systems. - Fix metricgroups title message in 'perf list', it should state that the metrics groups are to be used with the '-M' option, not '-e'. - Sync the msr-index.h copy with the kernel sources, adding support for using "AMD64_TSC_RATIO" in filter expressions in 'perf trace' as well as decoding it when printing the MSR tracepoint arguments. - Fix program header size and alignment when generating a JIT ELF in 'perf inject'. - Add multiple new Intel PT 'perf test' entries, including a jitdump one. - Fix the 'perf test' entries for 'perf stat' CSV and JSON output when running on PowerPC due to an invalid topology number in that arch. - Fix the 'perf test' for arm_coresight failures on the ARM Juno system. - Fix the 'perf test' attr entry for PERF_FORMAT_LOST, adding this option to the or expression expected in the intercepted perf_event_open() syscall. - Add missing condition flags ('hs', 'lo', 'vc', 'vs') for arm64 in the 'perf annotate' asm parser. - Fix 'perf mem record -C' option processing, it was being chopped up when preparing the underlying 'perf record -e mem-events' and thus being ignored, requiring using '-- -C CPUs' as a workaround. - Improvements and tidy ups for 'perf test' shell infra. - Fix Intel PT information printing segfault in uClibc, where a NULL format was being passed to fprintf. * tag 'perf-tools-for-v6.1-2-2022-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (23 commits) tools arch x86: Sync the msr-index.h copy with the kernel sources perf auxtrace arm64: Add support for parsing HiSilicon PCIe Trace packet perf auxtrace arm64: Add support for HiSilicon PCIe Tune and Trace device driver perf auxtrace arm: Refactor event list iteration in auxtrace_record__init() perf tests stat+json_output: Include sanity check for topology perf tests stat+csv_output: Include sanity check for topology perf intel-pt: Fix system_wide dummy event for hybrid perf intel-pt: Fix segfault in intel_pt_print_info() with uClibc perf test: Fix attr tests for PERF_FORMAT_LOST perf test: test_intel_pt.sh: Add 9 tests perf inject: Fix GEN_ELF_TEXT_OFFSET for jit perf test: test_intel_pt.sh: Add jitdump test perf test: test_intel_pt.sh: Tidy some alignment perf test: test_intel_pt.sh: Print a message when skipping kernel tracing perf test: test_intel_pt.sh: Tidy some perf record options perf test: test_intel_pt.sh: Fix return checking again perf: Skip and warn on unknown format 'configN' attrs perf list: Fix metricgroups title message perf mem: Fix -C option behavior for perf mem record perf annotate: Add missing condition flags for arm64 ...
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y compile error for the combination of Clang >= 14 and GAS <= 2.35. - Drop vmlinux.bz2 from the rpm package as it just annoyingly increased the package size. - Fix modpost error under build environments using musl. - Make *.ll files keep value names for easier debugging - Fix single directory build - Prevent RISC-V from selecting the broken DWARF5 support when Clang and GAS are used together. * tag 'kbuild-fixes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: lib/Kconfig.debug: Add check for non-constant .{s,u}leb128 support to DWARF5 kbuild: fix single directory build kbuild: add -fno-discard-value-names to cmd_cc_ll_c scripts/clang-tools: Convert clang-tidy args to list modpost: put modpost options before argument kbuild: Stop including vmlinux.bz2 in the rpm's Kconfig.debug: add toolchain checks for DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT Kconfig.debug: simplify the dependency of DEBUG_INFO_DWARF4/5
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull more clk updates from Stephen Boyd: "This is the final part of the clk patches for this merge window. The clk rate range series needed another week to fully bake. Maxime fixed the bug that broke clk notifiers and prevented this from being included in the first pull request. He also added a unit test on top to make sure it doesn't break so easily again. The majority of the series fixes up how the clk_set_rate_*() APIs work, particularly around when the rate constraints are dropped and how they move around when reparenting clks. Overall it's a much needed improvement to the clk rate range APIs that used to be pretty broken if you looked sideways. Beyond the core changes there are a few driver fixes for a compilation issue or improper data causing clks to fail to register or have the wrong parents. These are good to get in before the first -rc so that the system actually boots on the affected devices" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (31 commits) clk: tegra: Fix Tegra PWM parent clock clk: at91: fix the build with binutils 2.27 clk: qcom: gcc-msm8660: Drop hardcoded fixed board clocks clk: mediatek: clk-mux: Add .determine_rate() callback clk: tests: Add tests for notifiers clk: Update req_rate on __clk_recalc_rates() clk: tests: Add missing test case for ranges clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d clk: Introduce the clk_hw_get_rate_range function clk: Zero the clk_rate_request structure clk: Stop forwarding clk_rate_requests to the parent clk: Constify clk_has_parent() clk: Introduce clk_core_has_parent() clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock clk: Add our request boundaries in clk_core_init_rate_req clk: Introduce clk_hw_init_rate_request() clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller clk: Change clk_core_init_rate_req prototype clk: Set req_rate on reparenting clk: Take into account uncached clocks in clk_set_rate_range() ...
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull more cifs updates from Steve French: - fix a regression in guest mounts to old servers - improvements to directory leasing (caching directory entries safely beyond the root directory) - symlink improvement (reducing roundtrips needed to process symlinks) - an lseek fix (to problem where some dir entries could be skipped) - improved ioctl for returning more detailed information on directory change notifications - clarify multichannel interface query warning - cleanup fix (for better aligning buffers using ALIGN and round_up) - a compounding fix - fix some uninitialized variable bugs found by Coverity and the kernel test robot * tag '6.1-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: smb3: improve SMB3 change notification support cifs: lease key is uninitialized in two additional functions when smb1 cifs: lease key is uninitialized in smb1 paths smb3: must initialize two ACL struct fields to zero cifs: fix double-fault crash during ntlmssp cifs: fix static checker warning cifs: use ALIGN() and round_up() macros cifs: find and use the dentry for cached non-root directories also cifs: enable caching of directories for which a lease is held cifs: prevent copying past input buffer boundaries cifs: fix uninitialised var in smb2_compound_op() cifs: improve symlink handling for smb2+ smb3: clarify multichannel warning cifs: fix regression in very old smb1 mounts cifs: fix skipping to incorrect offset in emit_cached_dirents
-
Tetsuo Handa authored
This reverts commit 78e5a339 ("cpumask: fix checking valid cpu range"). syzbot is hitting WARN_ON_ONCE(cpu >= nr_cpumask_bits) warning at cpu_max_bits_warn() [1], for commit 78e5a339 ("cpumask: fix checking valid cpu range") is broken. Obviously that patch hits WARN_ON_ONCE() when e.g. reading /proc/cpuinfo because passing "cpu + 1" instead of "cpu" will trivially hit cpu == nr_cpumask_bits condition. Although syzbot found this problem in linux-next.git on 2022/09/27 [2], this problem was not fixed immediately. As a result, that patch was sent to linux.git before the patch author recognizes this problem, and syzbot started failing to test changes in linux.git since 2022/10/10 [3]. Andrew Jones proposed a fix for x86 and riscv architectures [4]. But [2] and [5] indicate that affected locations are not limited to arch code. More delay before we find and fix affected locations, less tested kernel (and more difficult to bisect and fix) before release. We should have inspected and fixed basically all cpumask users before applying that patch. We should not crash kernels in order to ask existing cpumask users to update their code, even if limited to CONFIG_DEBUG_PER_CPU_MAPS=y case. Link: https://syzkaller.appspot.com/bug?extid=d0fd2bf0dd6da72496dd [1] Link: https://syzkaller.appspot.com/bug?extid=21da700f3c9f0bc40150 [2] Link: https://syzkaller.appspot.com/bug?extid=51a652e2d24d53e75734 [3] Link: https://lkml.kernel.org/r/20221014155845.1986223-1-ajones@ventanamicro.com [4] Link: https://syzkaller.appspot.com/bug?extid=4d46c43d81c3bd155060 [5] Reported-by:
Andrew Jones <ajones@ventanamicro.com> Reported-by: syzbot+d0fd2bf0dd6da72496dd@syzkaller.appspotmail.com Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Yury Norov <yury.norov@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Nathan Chancellor authored
When building with a RISC-V kernel with DWARF5 debug info using clang and the GNU assembler, several instances of the following error appear: /tmp/vgettimeofday-48aa35.s:2963: Error: non-constant .uleb128 is not supported Dumping the .s file reveals these .uleb128 directives come from .debug_loc and .debug_ranges: .Ldebug_loc0: .byte 4 # DW_LLE_offset_pair .uleb128 .Lfunc_begin0-.Lfunc_begin0 # starting offset .uleb128 .Ltmp1-.Lfunc_begin0 # ending offset .byte 1 # Loc expr size .byte 90 # DW_OP_reg10 .byte 0 # DW_LLE_end_of_list .Ldebug_ranges0: .byte 4 # DW_RLE_offset_pair .uleb128 .Ltmp6-.Lfunc_begin0 # starting offset .uleb128 .Ltmp27-.Lfunc_begin0 # ending offset .byte 4 # DW_RLE_offset_pair .uleb128 .Ltmp28-.Lfunc_begin0 # starting offset .uleb128 .Ltmp30-.Lfunc_begin0 # ending offset .byte 0 # DW_RLE_end_of_list There is an outstanding binutils issue to support a non-constant operand to .sleb128 and .uleb128 in GAS for RISC-V but there does not appear to be any movement on it, due to concerns over how it would work with linker relaxation. To avoid these build errors, prevent DWARF5 from being selected when using clang and an assembler that does not have support for these symbol deltas, which can be easily checked in Kconfig with as-instr plus the small test program from the dwz test suite from the binutils issue. Link: https://sourceware.org/bugzilla/show_bug.cgi?id=27215 Link: https://github.com/ClangBuiltLinux/linux/issues/1719Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
Masahiro Yamada authored
Commit f110e5a2 ("kbuild: refactor single builds of *.ko") was wrong. KBUILD_MODULES _is_ needed for single builds. Otherwise, "make foo/bar/baz/" does not build module objects at all. Fixes: f110e5a2 ("kbuild: refactor single builds of *.ko") Reported-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Tested-by:
David Sterba <dsterba@suse.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slabLinus Torvalds authored
Pull slab hotfix from Vlastimil Babka: "A single fix for the common-kmalloc series, for warnings on mips and sparc64 reported by Guenter Roeck" * tag 'slab-for-6.1-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: mm/slab: use kmalloc_node() for off slab freelist_idx_t array allocation
-
- 15 Oct, 2022 4 commits
-
-
https://github.com/openrisc/linuxLinus Torvalds authored
Pull OpenRISC updates from Stafford Horne: "I have relocated to London so not much work from me while I get settled. Still, OpenRISC picked up two patches in this window: - Fix for kernel page table walking from Jann Horn - MAINTAINER entry cleanup from Palmer Dabbelt" * tag 'for-linus' of https://github.com/openrisc/linux: MAINTAINERS: git://github -> https://github.com for openrisc openrisc: Fix pagewalk usage in arch_dma_{clear, set}_uncached
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull pci fix from Bjorn Helgaas: "Revert the attempt to distribute spare resources to unconfigured hotplug bridges at boot time. This fixed some dock hot-add scenarios, but Jonathan Cameron reported that it broke a topology with a multi-function device where one function was a Switch Upstream Port and the other was an Endpoint" * tag 'pci-v6.1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "PCI: Distribute available resources for root buses, too"
-
Hyeonggon Yoo authored
After commit d6a71648 ("mm/slab: kmalloc: pass requests larger than order-1 page to page allocator"), SLAB passes large ( > PAGE_SIZE * 2) requests to buddy like SLUB does. SLAB has been using kmalloc caches to allocate freelist_idx_t array for off slab caches. But after the commit, freelist_size can be bigger than KMALLOC_MAX_CACHE_SIZE. Instead of using pointer to kmalloc cache, use kmalloc_node() and only check if the kmalloc cache is off slab during calculate_slab_order(). If freelist_size > KMALLOC_MAX_CACHE_SIZE, no looping condition happens as it allocates freelist_idx_t array directly from buddy. Link: https://lore.kernel.org/all/20221014205818.GA1428667@roeck-us.net/Reported-and-tested-by:
Guenter Roeck <linux@roeck-us.net> Fixes: d6a71648 ("mm/slab: kmalloc: pass requests larger than order-1 page to page allocator") Signed-off-by:
Hyeonggon Yoo <42.hyeyoo@gmail.com> Signed-off-by:
Vlastimil Babka <vbabka@suse.cz>
-
git://githubhttps://github.comPalmer Dabbelt authored
Github deprecated the git:// links about a year ago, so let's move to the https:// URLs instead. Reported-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://github.blog/2021-09-01-improving-git-protocol-security-github/Signed-off-by:
Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by:
Stafford Horne <shorne@gmail.com>
-