- 10 Aug, 2022 1 commit
-
-
Mark Brown authored
Merge series from Martin Povišer <povik+lin@cutebit.org>: The first two fixes should be straightforward. The latter two clean up what looks to me like a mess in the setting of power levels. However we settle it, we should then do the same changes to TAS2764, which has the same template (and maybe there are other drivers).
-
- 08 Aug, 2022 5 commits
-
-
Oder Chiou authored
The patch fixes the JD voltage dropping issue in the HDA JD using. Signed-off-by:
Oder Chiou <oder_chiou@realtek.com> Reported-by:
Mohan Kumar D <mkumard@nvidia.com> Link: https://lore.kernel.org/r/20220808052836.25791-1-oder_chiou@realtek.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Martin Povišer authored
Because the PWR_CTRL field is modeled as the power state of the DAC widget, and at the same time it is used to implement mute/unmute, we need some additional book-keeping to have the right end result no matter the sequence of calls. Without this fix, one can mute an ongoing stream by toggling a speaker pin control. Fixes: 1a476abc ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by:
Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220808141246.5749-5-povik+lin@cutebit.orgSigned-off-by:
-
Martin Povišer authored
The driver is setting the PWR_CTRL field in both the set_bias_level callback and on DAPM events of the DAC widget (and also in the mute_stream method). Drop the set_bias_level callback altogether as the power setting it does is in conflict with the other code paths. Fixes: 1a476abc ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by:
-
Martin Povišer authored
The part is a mono speaker amp, but it can do downmix and switch between left and right channel, so the right channel range is 1 to 2. Fixes: 1a476abc ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by:
-
Martin Povišer authored
Fix setting of FSYNC polarity for DAI formats other than I2S. Also add support for polarity inversion. Fixes: 1a476abc ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by:
-
- 05 Aug, 2022 8 commits
-
-
Pierre-Louis Bossart authored
Changes to add HDMI capture support broke the machine driver probe for all other platforms. The commit listed in the Fixes tag added a board_id descriptor but didn't add the default name for the sof_essx8336 machine driver. Add the missing entry and remove the now-useless platform driver alias. Reported-by:
Eugene J Markow <ejmarkow@yahoo.com> BugLink: https://github.com/thesofproject/linux/issues/3336 Fixes: 86b1959a ("ASoC: Intel: sof_es8336: add support for HDMI_In capture") Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220805133332.207932-1-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Mark Brown authored
Merge series from Takashi Iwai <tiwai@suse.de>: This is a patch series to paper over the theoretical buffer overflow that might be caused by snprintf(). snprintf() is notorious for its behavior and the usage of a safer version, scnprintf(), is recommended.
-
Takashi Iwai authored
When DPCM tries to add valid BE connections at dpcm_add_paths(), it doesn't check whether the picked BE actually supports for the given stream direction. Due to that, when an asymmetric BE stream is present, it picks up wrongly and this may result in a NULL dereference at a later point where the code assumes the existence of a corresponding BE substream. This patch adds the check for the presence of the substream for the target BE for avoiding the problem above. Note that we have already some fix for non-existing BE substream at commit 6246f283 ("ASoC: dpcm: skip missing substream while applying symmetry"). But the code path we've hit recently is rather happening before the previous fix. So this patch tries to fix at picking up a BE instead of parsing BE lists. Fixes: bbf7d3b1 ("ASoC: soc-pcm: align BE 'atomicity' with that of the FE") Reported-by:
Alex Natalsson <harmoniesworlds@gmail.com> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/CADs9LoPZH_D+eJ9qjTxSLE5jGyhKsjMN7g2NighZ16biVxsyKw@mail.gmail.comSigned-off-by:
Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20220801170510.26582-1-tiwai@suse.deSigned-off-by:
-
Justin Stitt authored
When building with Clang we encounter these warnings: | sound/soc/sof/ipc3-topology.c:2343:4: error: format specifies type | 'unsigned char' but the argument has type 'int' [-Werror,-Wformat] | SOF_ABI_MAJOR, SOF_ABI_MINOR, SOF_ABI_PATCH); | ^~~~~~~~~~~~~~~^~~~~~~~~~~~~~~^~~~~~~~~~~~~ Use correct format specifier `%d` since args are of type int. Link: https://github.com/ClangBuiltLinux/linux/issues/378Reported-by:
Nathan Chancellor <nathan@kernel.org> Suggested-by:
Justin Stitt <justinstitt@google.com> Reviewed-by:
-
Biju Das authored
We usually do cleanup in reverse order of init. Currently in case of error rz_ssi_release_dma_channels() done in the reverse order. This patch improves error handling in rz_ssi_probe() error path. While at it, use "goto cleanup" style to reduce code duplication. Reported-by:
Pavel Machek <pavel@denx.de> Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220728092612.38858-1-biju.das.jz@bp.renesas.comSigned-off-by:
-
Takashi Iwai authored
snprintf() returns the would-be-filled size when the string overflows the given buffer size, hence using this value may result in the buffer overflow (although it's unrealistic). This patch replaces with a safer version, scnprintf() for papering over such a potential issue. Fixes: 29c8e439 ("ASoC: SOF: Intel: hda: add extended rom status dump to error log") Signed-off-by:
-
Takashi Iwai authored
snprintf() returns the would-be-filled size when the string overflows the given buffer size, hence using this value may result in the buffer overflow (although it's unrealistic). This patch replaces with a safer version, scnprintf() for papering over such a potential issue. Fixes: 5b10b629 ("ASoC: SOF: Add `memory_info` file to debugfs") Signed-off-by:
-
Takashi Iwai authored
snprintf() returns the would-be-filled size when the string overflows the given buffer size, hence using this value may result in a buffer overflow (although it's unrealistic). This patch replaces it with a safer version, scnprintf() for papering over such a potential issue. Fixes: f1b3b320 ("ASoC: Intel: avs: Generic soc component driver") Signed-off-by:
Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20220801165420.25978-2-tiwai@suse.deSigned-off-by:
-
- 02 Aug, 2022 1 commit
-
-
syed sabakareem authored
Updated DMI entries 21EM, 21EN, 21J5 and 21J6 for AMD platforms P15v Gen 3 and P14s Gen 3. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216267Signed-off-by:
syed saba kareem <Syed.SabaKareem@amd.com> Reported-by:
Pananchikkal Renjith <renjith.pananchikkal@amd.com> Link: https://lore.kernel.org/r/20220802062503.159328-1-Syed.SabaKareem@amd.comSigned-off-by:
-
- 28 Jul, 2022 2 commits
-
-
Gustavo A. R. Silva authored
Use 2-factor multiplication argument form kcalloc() instead of kzalloc(). Link: https://github.com/KSPP/linux/issues/162Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20211006180810.GA913370@embeddedorSigned-off-by:
-
Mark Brown authored
Merge series from Claudiu Beznea <claudiu.beznea@microchip.com>: Hi, The series adds one fix for mchp-spdifrx and one cleanups for mchp-spdifrx and mchp-spdifrx drivers. Thank you, Claudiu Beznea Changes in v3: - changed cover letter title s/few/one, s/cleanups/cleanup - fix compilation error and warnings - keep only patch 1/5 and patch 3/5 from previous version as the rest of them were integrated Changes in v2: - s/tag/tab in the title of patch 2/5 Claudiu Beznea (2): ASoC: mchp-spdifrx: disable end of block interrupt on failures ASoC: mchp-spdiftx: remove references to mchp_i2s_caps sound/soc/atmel/mchp-spdifrx.c | 9 ++++++--- sound/soc/atmel/mchp-spdiftx.c | 8 -------- 2 files changed, 6 insertions(+), 11 deletions(-) -- 2.34.1
-
- 27 Jul, 2022 4 commits
-
-
Krzysztof Kozlowski authored
Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220727164050.385241-1-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Jiaxin Yu authored
The afe_priv->dai_priv[] is allocated when platform driver probe(), if it failed, the ASoC platform driver probe() will return fail first. Therefore, this is excessive judgment, and the condition will never be established. Bug report: https://www.spinics.net/lists/alsa-devel/msg145609.html This is a semi-automatic email about new static checker warnings. The patch ae92dcbe: "ASoC: mediatek: mt8186: support tdm in platform driver" from May 23, 2022, leads to the following Smatch complaint: sound/soc/mediatek/mt8186/mt8186-dai-tdm.c:424 mtk_dai_tdm_hw_params() warn: variable dereferenced before check 'tdm_priv' (see line 406) sound/soc/mediatek/mt8186/mt8186-dai-tdm.c 405 struct mtk_afe_tdm_priv *tdm_priv = afe_priv->dai_priv[tdm_id]; 406 unsigned int tdm_mode = tdm_priv->tdm_mode; ^^^^^^^^^^^^^^^^^^^ Lot's of dereferences 407 unsigned int data_mode = tdm_priv->data_mode; 408 unsigned int rate = params_rate(params); 409 unsigned int channels = params_channels(params); 410 snd_pcm_format_t format = params_format(params); 411 unsigned int bit_width = 412 snd_pcm_format_physical_width(format); 413 unsigned int tdm_channels = (data_mode == TDM_DATA_ONE_PIN) ? 414 get_tdm_ch_per_sdata(tdm_mode, channels) : 2; 415 unsigned int lrck_width = 416 get_tdm_lrck_width(format, tdm_mode); 417 unsigned int tdm_con = 0; 418 bool slave_mode = tdm_priv->slave_mode; 419 bool lrck_inv = tdm_priv->lck_invert; 420 bool bck_inv = tdm_priv->bck_invert; 421 unsigned int tran_rate; 422 unsigned int tran_relatch_rate; 423 424 if (!tdm_priv) { ^^^^^^^^^ Checked too late 425 dev_err(afe->dev, "%s(), tdm_priv == NULL", __func__); 426 return -EINVAL; Fixes: ae92dcbe ("ASoC: mediatek: mt8186: support tdm in platform driver") Signed-off-by:
Jiaxin Yu <jiaxin.yu@mediatek.com> Link: https://lore.kernel.org/r/20220726154220.28141-1-jiaxin.yu@mediatek.comSigned-off-by:
-
Claudiu Beznea authored
Remove references to struct mchp_i2s_caps as they are not used. Signed-off-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220727090814.2446111-3-claudiu.beznea@microchip.comSigned-off-by:
-
Claudiu Beznea authored
Disable end of block interrupt in case of wait for completion timeout or errors to undo previously enable operation (done in mchp_spdifrx_isr_blockend_en()). Otherwise we can end up with an unbalanced reference counter for this interrupt. Fixes: ef265c55 ("ASoC: mchp-spdifrx: add driver for SPDIF RX") Signed-off-by:
-
- 26 Jul, 2022 10 commits
-
-
Jiaxin Yu authored
Fix Smatch static checker warning. strncmp() here only needs to compare the first seven bytes, so in order to make the code more clear, only the first seven bytes of the string used as the comparison are reserved. Bug report: https://www.spinics.net/lists/alsa-devel/msg145608.html sound/soc/mediatek/mt8186/mt8186-dai-adda.c:78 get_adda_priv_by_name() warn: strncmp() with weird length: 17 vs 7 sound/soc/mediatek/mt8186/mt8186-dai-adda.c 72 static struct mtk_afe_adda_priv *get_adda_priv_by_name(struct mtk_base_afe *afe, 73 const char *name) 74 { 75 struct mt8186_afe_private *afe_priv = afe->platform_priv; 76 int dai_id; 77 --> 78 if (strncmp(name, "aud_dac_hires_clk", 7) == 0 || 79 strncmp(name, "aud_adc_hires_clk", 7) == 0) Fixes: b65c4662 ("ASoC: mediatek: mt8186: support adda in platform driver") Signed-off-by:
-
Raphael-Xu authored
Remove tas2780 binding documentation, the binding will be documented in the tax27xx binding. Signed-off-by:
Raphael-Xu <13691752556@139.com> Acked-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220722105345.175-1-13691752556@139.comSigned-off-by:
-
Krzysztof Kozlowski authored
Absolute path to other DT schema is preferred over relative one. Signed-off-by:
-
Mark Brown authored
Merge series from Claudiu Beznea <claudiu.beznea@microchip.com>: The series adds one fix for mchp-spdifrx and few cleanups for mchp-spdifrx and mchp-spdifrx drivers.
-
Nathan Chancellor authored
Clang warns: ../sound/soc/amd/acp/acp-platform.c:117:19: error: variable 'ext_intr_stat1' is uninitialized when used here [-Werror,-Wuninitialized] if (stream && (ext_intr_stat1 & stream->irq_bit)) { ^~~~~~~~~~~~~~ ../sound/soc/amd/acp/acp-platform.c:97:35: note: initialize the variable 'ext_intr_stat1' to silence this warning u32 ext_intr_stat, ext_intr_stat1, i; ^ = 0 1 error generated. The variable was not properly renamed, correct it to resolve the warning. Fixes: 93f53881 ("ASoC: amd: acp: Modify local variables name to generic") Link: https://github.com/ClangBuiltLinux/linux/issues/1675Signed-off-by:Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20220725180539.1315066-1-nathan@kernel.orgSigned-off-by:
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: A couple of minor updates contributed and tested by Intel teams or end-users.
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: One sanity check for SSP index reported by NHLT/BIOS and two updates for Mediatek and Intel Chromebooks related to already-merged firmware changes.
-
Claudiu Beznea authored
Add blank line after MODULE_DEVICE_TABLE() and remove the one before it. Signed-off-by:
-
Claudiu Beznea authored
Avoid having patterns like: int ret; // ... ret = 0; // ... ret = call_function(); if (ret) return ret; return 0; and return directly ret for all cases. Signed-off-by:
-
Claudiu Beznea authored
Use single tab indentation for mchp_spdifrx_mixer_control structure. Signed-off-by:
-
- 25 Jul, 2022 9 commits
-
-
Yong Zhi authored
The sof_rt5682_quirk check was placed in the middle of hdmi handling code, move it to the front to be consistent with sof_rt5682.c/sof_card_late_probe(). Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
Yong Zhi <yong.zhi@intel.com> Signed-off-by:
-
Yong Zhi authored
The check of sof_rt5682_quirk should not be skipped unless the HDMI handling code exits with error, fix by moving the quirk check to the front. Fixes: 94d2d089 ("ASoC: Intel: Boards: tgl_max98373: add dai_trigger function") Reviewed-by:
-
Yong Zhi authored
This patch adds the driver data for rt5682 codec on SSP0 and max98357a speaker amplifiers on SSP1 for MTL platform. Reviewed-by:
-
Pierre-Louis Bossart authored
For some reason we open-coded the SSP selection and only supported SSP0, 1 and 2. On ApolloLake platforms, the SSP5 can be used as well for the ES8336 hardware link. Remove hard-coded if/else code and align with same code already used in the SOF driver. BugLink: https://github.com/thesofproject/sof/issues/6015Reviewed-by:
-
Muralidhar Reddy authored
The number of dai_links for sound cards needs to be reset during probe. This is done in all machine drivers except this one. Reviewed-by:
Muralidhar Reddy <muralidhar.reddy@intel.com> Signed-off-by:
-
Muralidhar Reddy authored
Adding support for 2 streams of HDMI-In capture via I2S in CBP_CFP configuration (codec provides bit clock and frame sync). Reviewed-by:
-
Andrey Turkin authored
This fixes speaker GPIO detection on machines those ACPI tables list their jack detection GpioInt before output GpioIo. GpioInt entry can never be the speaker/headphone amplifier control so it makes sense to only look for GpioIo entries when looking for them. Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Andrey Turkin <andrey.turkin@gmail.com> Signed-off-by:
-
Andrey Turkin authored
The two GPIO quirk bits only affected actual GPIO selection when set by the quirks table. They were reported as being in effect when set via module options but actually did nothing. Reviewed-by:
-
Muralidhar Reddy authored
Adding support for ES83x6 codec in ADL match table Reviewed-by:
-
