smb311_decode_neg_context() doesn't properly check against SMB packet
boundaries prior to accessing individual negotiate context entries. This
is due to the length check omitting the eight byte smb2_neg_context
header, as well as incorrect decrementing of len_of_ctxts.

Fixes: 5100d8a3 ("SMB311: Improve checking of negotiate security contexts")
Reported-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull perf fixes from Borislav Petkov:

 - Fix "same task" check when redirecting event output

 - Do not wait unconditionally for RCU on the event migration path if
   there are no events to migrate

* tag 'perf_urgent_for_v6.3_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix the same task check in perf_event_set_output
  perf: Optimize perf_pmu_migrate_context()

Pull x86 fixes from Borislav Petkov:

 - Add a new Intel Arrow Lake CPU model number

 - Fix a confusion about how to check the version of the ACPI spec which
   supports a "online capable" bit in the MADT table which lead to a
   bunch of boot breakages with Zen1 systems and VMs

* tag 'x86_urgent_for_v6.3_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Add model number for Intel Arrow Lake processor
  x86/acpi/boot: Correct acpi_is_processor_usable() check
  x86/ACPI/boot: Use FADT version to check support for online capable

Pull compute express link (cxl) fixes from Dan Williams:
 "Several fixes for driver startup regressions that landed during the
  merge window as well as some older bugs.

  The regressions were due to a lack of testing with what the CXL
  specification calls Restricted CXL Host (RCH) topologies compared to
  the testing with Virtual Host (VH) CXL topologies. A VH topology is
  typical PCIe while RCH topologies map CXL endpoints as Root Complex
  Integrated endpoints. The impact is some driver crashes on startup.

  This merge window also added compatibility for range registers (the
  mechanism that CXL 1.1 defined for mapping memory) to treat them like
  HDM decoders (the mechanism that CXL 2.0 defined for mapping
  Host-managed Device Memory). That work collided with the new region
  enumeration code that was tested with CXL 2.0 setups, and fails with
  crashes at startup.

  Lastly, the DOE (Data Object Exchange) implementation for retrieving
  an ACPI-like data table from CXL devices is being reworked for v6.4.
  Several fixes fell out of that work that are suitable for v6.3.

  All of this has been in linux-next for a while, and all reported
  issues [1] have been addressed.

  Summary:

   - Fix several issues with region enumeration in RCH topologies that
     can trigger crashes on driver startup or shutdown.

   - Fix CXL DVSEC range register compatibility versus region
     enumeration that leads to startup crashes

   - Fix CDAT endiannes handling

   - Fix multiple buffer handling boundary conditions

   - Fix Data Object Exchange (DOE) workqueue usage vs
     CONFIG_DEBUG_OBJECTS warn splats"

Link: http://lore.kernel.org/r/20230405075704.33de8121@canb.auug.org.au [1]

* tag 'cxl-fixes-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl/hdm: Extend DVSEC range register emulation for region enumeration
  cxl/hdm: Limit emulation to the number of range registers
  cxl/region: Move coherence tracking into cxl_region_attach()
  cxl/region: Fix region setup/teardown for RCDs
  cxl/port: Fix find_cxl_root() for RCDs and simplify it
  cxl/hdm: Skip emulation when driver manages mem_enable
  cxl/hdm: Fix double allocation of @cxlhdm
  PCI/DOE: Fix memory leak with CONFIG_DEBUG_OBJECTS=y
  PCI/DOE: Silence WARN splat with CONFIG_DEBUG_OBJECTS=y
  cxl/pci: Handle excessive CDAT length
  cxl/pci: Handle truncated CDAT entries
  cxl/pci: Handle truncated CDAT header
  cxl/pci: Fix CDAT retrieval on big endian

Pull cifs client fixes from Steve French:
 "Two cifs/smb3 client fixes, one for stable:

   - double lock fix for a cifs/smb1 reconnect path

   - DFS prefixpath fix for reconnect when server moved"

* tag '6.3-rc5-smb3-cifs-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: double lock in cifs_reconnect_tcon()
  cifs: sanitize paths in cifs_update_super_prepath.

Pull char/misc driver fixes from Greg KH:
 "Here are a small set of various small driver changes for 6.3-rc6.
  Included in here are:

   - iio driver fixes for reported problems

   - coresight hwtracing bugfix for reported problem

   - small counter driver bugfixes

  All have been in linux-next for a while with no reported problems"

* tag 'char-misc-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  coresight: etm4x: Do not access TRCIDR1 for identification
  coresight-etm4: Fix for() loop drvdata->nr_addr_cmp range bug
  iio: adc: ti-ads7950: Set `can_sleep` flag for GPIO chip
  iio: adc: palmas_gpadc: fix NULL dereference on rmmod
  counter: 104-quad-8: Fix Synapse action reported for Index signals
  counter: 104-quad-8: Fix race condition between FLAG and CNTR reads
  iio: adc: max11410: fix read_poll_timeout() usage
  iio: dac: cio-dac: Fix max DAC write value check for 12-bit
  iio: light: cm32181: Unregister second I2C client if present
  iio: accel: kionix-kx022a: Get the timestamp from the driver's private data in the trigger_handler
  iio: adc: ad7791: fix IRQ flags
  iio: buffer: make sure O_NONBLOCK is respected
  iio: buffer: correctly return bytes written in output buffers
  iio: light: vcnl4000: Fix WARN_ON on uninitialized lock
  iio: adis16480: select CONFIG_CRC32
  drivers: iio: adc: ltc2497: fix LSB shift
  iio: adc: qcom-spmi-adc5: Fix the channel name

Pull tty/serial driver fixes from Greg KH:
 "Here are some small tty and serial driver fixes for some reported
  problems:

   - fsl_uart driver bugfixes

   - sh-sci serial driver bugfixes

   - renesas serial driver DT binding bugfixes

   - 8250 DMA bugfix

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'tty-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial: sh-sci: Fix Rx on RZ/G2L SCI
  tty: serial: fsl_lpuart: fix crash in lpuart_uport_is_active
  tty: serial: fsl_lpuart: avoid checking for transfer complete when UARTCTRL_SBK is asserted in lpuart32_tx_empty
  serial: 8250: Prevent starting up DMA Rx on THRI interrupt
  dt-bindings: serial: renesas,scif: Fix 4th IRQ for 4-IRQ SCIFs
  tty: serial: sh-sci: Fix transmit end interrupt handler

Pull USB bugfixes from Greg KH:
 "Here are some small USB bugfixes for 6.3-rc6 that have been in my
  tree, and in linux-next, for a while. Included in here are:

   - new usb-serial driver device ids

   - xhci bugfixes for reported problems

   - gadget driver bugfixes for reported problems

   - dwc3 new device id

  All have been in linux-next with no reported problems"

* tag 'usb-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: cdnsp: Fixes error: uninitialized symbol 'len'
  usb: gadgetfs: Fix ep_read_iter to handle ITER_UBUF
  usb: gadget: f_fs: Fix ffs_epfile_read_iter to handle ITER_UBUF
  usb: typec: altmodes/displayport: Fix configure initial pin assignment
  usb: dwc3: pci: add support for the Intel Meteor Lake-S
  xhci: Free the command allocated for setting LPM if we return early
  Revert "usb: xhci-pci: Set PROBE_PREFER_ASYNCHRONOUS"
  xhci: also avoid the XHCI_ZERO_64B_REGS quirk with a passthrough iommu
  USB: serial: option: add Quectel RM500U-CN modem
  usb: xhci: tegra: fix sleep in atomic call
  USB: serial: option: add Telit FE990 compositions
  USB: serial: cp210x: add Silicon Labs IFS-USB-DATACABLE IDs

Pull SCSI fixes from James Bottomley:
 "Four small fixes, all in drivers. They're all one or two lines except
  for the ufs one, but that's a simple revert of a previous feature"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: iscsi_tcp: Check that sock is valid before iscsi_set_param()
  scsi: qla2xxx: Fix memory leak in qla2x00_probe_one()
  scsi: mpi3mr: Handle soft reset in progress fault code (0xF002)
  scsi: Revert "scsi: ufs: core: Initialize devfreq synchronously"

Pull block fixes from Jens Axboe:

 - Ensure that ublk always reads the whole sqe upfront (me)

 - Fix for a block size probing issue with ublk (Ming)

 - Fix for the bio based polling (Keith)

 - NVMe pull request via Christoph:
      - fix discard support without oncs (Keith Busch)

 - Partition scan error handling regression fix (Yu)

* tag 'block-6.3-2023-04-06' of git://git.kernel.dk/linux:
  block: don't set GD_NEED_PART_SCAN if scan partition failed
  block: ublk: make sure that block size is set correctly
  ublk: read any SQE values upfront
  nvme: fix discard support without oncs
  blk-mq: directly poll requests

Pull io_uring fixes from Jens Axboe:
 "Just two minor fixes for provided buffers - one where we could
  potentially leak a buffer, and one where the returned values was
  off-by-one in some cases"

* tag 'io_uring-6.3-2023-04-06' of git://git.kernel.dk/linux:
  io_uring: fix memory leak when removing provided buffers
  io_uring: fix return value when removing provided buffers

Pull dma-mapping fix from Christoph Hellwig:

 - fix a braino in the swiotlb alignment check fix (Petr Tesarik)

* tag 'dma-mapping-6.3-2023-04-08' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: fix a braino in the alignment check fix

Pull tracing fixes from Steven Rostedt:
 "A couple more minor fixes:

   - Reset direct->addr back to its original value on error in updating
     the direct trampoline code

   - Make lastcmd_mutex static"

* tag 'trace-v6.3-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/synthetic: Make lastcmd_mutex static
  ftrace: Fix issue that 'direct->addr' not restored in modify_ftrace_direct()

Merge tag 'mm-hotfixes-stable-2023-04-07-16-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull MM fixes from Andrew Morton:
 "28 hotfixes.

  23 are cc:stable and the other five address issues which were
  introduced during this merge cycle.

  20 are for MM and the remainder are for other subsystems"

* tag 'mm-hotfixes-stable-2023-04-07-16-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (28 commits)
  maple_tree: fix a potential concurrency bug in RCU mode
  maple_tree: fix get wrong data_end in mtree_lookup_walk()
  mm/swap: fix swap_info_struct race between swapoff and get_swap_pages()
  nilfs2: fix sysfs interface lifetime
  mm: take a page reference when removing device exclusive entries
  mm: vmalloc: avoid warn_alloc noise caused by fatal signal
  nilfs2: initialize "struct nilfs_binfo_dat"->bi_pad field
  nilfs2: fix potential UAF of struct nilfs_sc_info in nilfs_segctor_thread()
  zsmalloc: document freeable stats
  zsmalloc: document new fullness grouping
  fsdax: force clear dirty mark if CoW
  mm/hugetlb: fix uffd wr-protection for CoW optimization path
  mm: enable maple tree RCU mode by default
  maple_tree: add RCU lock checking to rcu callback functions
  maple_tree: add smp_rmb() to dead node detection
  maple_tree: fix write memory barrier of nodes once dead for RCU mode
  maple_tree: remove extra smp_wmb() from mas_dead_leaves()
  maple_tree: fix freeing of nodes in rcu mode
  maple_tree: detect dead nodes in mas_start()
  maple_tree: be more cautious about dead nodes
  ...

Pull gpio fixes from Bartosz Golaszewski:

 - fix irq handling in gpio-davinci

 - fix Kconfig dependencies for gpio-regmap

* tag 'gpio-fixes-for-v6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: davinci: Add irq chip flag to skip set wake
  gpio: davinci: Do not clear the bank intr enable bit in save_context
  gpio: GPIO_REGMAP: select REGMAP instead of depending on it

Pull ACPI fixes from Rafael Wysocki:
 "Fix the ACPI backlight override mechanism for the cases when
  acpi_backlight=video is set through the kernel command line or a DMI
  quirk and add backlight quirks for Apple iMac14,1 and iMac14,2 and
  Lenovo ThinkPad W530 (Hans de Goede)"

* tag 'acpi-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: video: Add acpi_backlight=video quirk for Lenovo ThinkPad W530
  ACPI: video: Add acpi_backlight=video quirk for Apple iMac14,1 and iMac14,2
  ACPI: video: Make acpi_backlight=video work independent from GPU driver
  ACPI: video: Add auto_detect arg to __acpi_video_get_backlight_type()

Pull arm64 fix from Catalin Marinas:
 "Fix uninitialised variable warning (from smatch) in the arm64 compat
  alignment fixup code"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: compat: Work around uninitialized variable warning

Pull ksmbd server fixes from Steve French:
 "Four fixes, three for stable:

   - slab out of bounds fix

   - lock cancellation fix

   - minor cleanup to address clang warning

   - fix for xfstest 551 (wrong parms passed to kvmalloc)"

* tag '6.3-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: fix slab-out-of-bounds in init_smb2_rsp_hdr
  ksmbd: delete asynchronous work from list
  ksmbd: remove unused is_char_allowed function
  ksmbd: do not call kvmalloc() with __GFP_NORETRY | __GFP_NO_WARN

This lock was supposed to be an unlock.

Fixes: 6cc041e9 ("cifs: avoid races in parallel reconnects in smb1")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Currently if disk_scan_partitions() failed, GD_NEED_PART_SCAN will still
set, and partition scan will be proceed again when blkdev_get_by_dev()
is called. However, this will cause a problem that re-assemble partitioned
raid device will creat partition for underlying disk.

Test procedure:

mdadm -CR /dev/md0 -l 1 -n 2 /dev/sda /dev/sdb -e 1.0
sgdisk -n 0:0:+100MiB /dev/md0
blockdev --rereadpt /dev/sda
blockdev --rereadpt /dev/sdb
mdadm -S /dev/md0
mdadm -A /dev/md0 /dev/sda /dev/sdb

Test result: underlying disk partition and raid partition can be
observed at the same time

Note that this can still happen in come corner cases that
GD_NEED_PART_SCAN can be set for underlying disk while re-assemble raid
device.

Fixes: e5cfefa9 ("block: fix scan partition for exclusively open device again")
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The lastcmd_mutex is only used in trace_events_synth.c and should be
static.

Link: https://lore.kernel.org/linux-trace-kernel/202304062033.cRStgOuP-lkp@intel.com/
Link: https://lore.kernel.org/linux-trace-kernel/20230406111033.6e26de93@gandalf.local.home

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Fixes: 4ccf11c4 ("tracing/synthetic: Fix races on freeing last_cmd")
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from wireless and can.

  Current release - regressions:

   - wifi: mac80211:
      - fix potential null pointer dereference
      - fix receiving mesh packets in forwarding=0 networks
      - fix mesh forwarding

  Current release - new code bugs:

   - virtio/vsock: fix leaks due to missing skb owner

  Previous releases - regressions:

   - raw: fix NULL deref in raw_get_next().

   - sctp: check send stream number after wait_for_sndbuf

   - qrtr:
      - fix a refcount bug in qrtr_recvmsg()
      - do not do DEL_SERVER broadcast after DEL_CLIENT

   - wifi: brcmfmac: fix SDIO suspend/resume regression

   - wifi: mt76: fix use-after-free in fw features query.

   - can: fix race between isotp_sendsmg() and isotp_release()

   - eth: mtk_eth_soc: fix remaining throughput regression

   - eth: ice: reset FDIR counter in FDIR init stage

  Previous releases - always broken:

   - core: don't let netpoll invoke NAPI if in xmit context

   - icmp: guard against too small mtu

   - ipv6: fix an uninit variable access bug in __ip6_make_skb()

   - wifi: mac80211: fix the size calculation of
     ieee80211_ie_len_eht_cap()

   - can: fix poll() to not report false EPOLLOUT events

   - eth: gve: secure enough bytes in the first TX desc for all TCP
     pkts"

* tag 'net-6.3-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
  net: stmmac: check fwnode for phy device before scanning for phy
  net: stmmac: Add queue reset into stmmac_xdp_open() function
  selftests: net: rps_default_mask.sh: delete veth link specifically
  net: fec: make use of MDIO C45 quirk
  can: isotp: fix race between isotp_sendsmg() and isotp_release()
  can: isotp: isotp_ops: fix poll() to not report false EPOLLOUT events
  can: isotp: isotp_recvmsg(): use sock_recv_cmsgs() to get SOCK_RXQ_OVFL infos
  can: j1939: j1939_tp_tx_dat_new(): fix out-of-bounds memory access
  gve: Secure enough bytes in the first TX desc for all TCP pkts
  netlink: annotate lockless accesses to nlk->max_recvmsg_len
  ethtool: reset #lanes when lanes is omitted
  ping: Fix potentail NULL deref for /proc/net/icmp.
  raw: Fix NULL deref in raw_get_next().
  ice: Reset FDIR counter in FDIR init stage
  ice: fix wrong fallback logic for FDIR
  net: stmmac: fix up RX flow hash indirection table when setting channels
  net: ethernet: ti: am65-cpsw: Fix mdio cleanup in probe
  wifi: mt76: ignore key disable commands
  wifi: ath11k: reduce the MHI timeout to 20s
  ipv6: Fix an uninit variable access bug in __ip6_make_skb()
  ...

Merge tag 'linux-kselftest-fixes-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fixes from Shuah Khan:
 "One single fix to mount_setattr_test build failure"

* tag 'linux-kselftest-fixes-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests mount: Fix mount_setattr_test builds failed

Pull iommufd fixes from Jason Gunthorpe:

 - An invalid VA range can be be put in a pages and eventually trigger
   WARN_ON, reject it early

 - Use of the wrong start index value when doing the complex batch carry
   scheme

 - Wrong store ordering resulting in corrupting data used in a later
   calculation that corrupted the batch structure during carry

* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
  iommufd: Do not corrupt the pfn list when doing batch carry
  iommufd: Fix unpinning of pages when an access is present
  iommufd: Check for uptr overflow

Merge tag 'pwm/for-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm fixes from Thierry Reding:
 "These are some fixes to make sure the PWM state structure is always
  initialized to a known state.

  Prior to this it could happen in some situations that random data from
  the stack would leak into the data structure and cause subtle bugs"

* tag 'pwm/for-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: Zero-initialize the pwm_state passed to driver's .get_state()
  pwm: meson: Explicitly set .polarity in .get_state()
  pwm: sprd: Explicitly set .polarity in .get_state()
  pwm: iqs620a: Explicitly set .polarity in .get_state()
  pwm: cros-ec: Explicitly set .polarity in .get_state()
  pwm: hibvt: Explicitly set .polarity in .get_state()

Pull drm fixes from Daniel Vetter:
 "Mostly i915 fixes: dp mst for compression/dsc, perf ioctl uaf, ctx rpm
  accounting, gt reset vs huc loading.

  And a few individual driver fixes: ivpu dma fence&suspend, panfrost
  mmap, nouveau color depth"

* tag 'drm-fixes-2023-04-06' of git://anongit.freedesktop.org/drm/drm:
  accel/ivpu: Fix S3 system suspend when not idle
  accel/ivpu: Add dma fence to command buffers only
  drm/i915: Fix context runtime accounting
  drm/i915: fix race condition UAF in i915_perf_add_config_ioctl
  drm/i915: Use compressed bpp when calculating m/n value for DP MST DSC
  drm/i915/huc: Cancel HuC delayed load timer on reset.
  drm/i915/ttm: fix sparse warning
  drm/panfrost: Fix the panfrost_mmu_map_fault_addr() error path
  drm/nouveau/disp: Support more modes by checking with lower bpc

Pull sound fixes from Takashi Iwai:
 "The majority of changes here are various fixes for Intel drivers,
  and there is a change in ASoC PCM core for the format constraints.

  In addition, a workaround for HD-audio HDMI regressions and usual
  HD-audio quirks are found"

* tag 'sound-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/hdmi: Preserve the previous PCM device upon re-enablement
  ALSA: hda/realtek: Add quirk for Clevo X370SNW
  ALSA: hda/realtek: fix mute/micmute LEDs for a HP ProBook
  ASoC: SOF: avoid a NULL dereference with unsupported widgets
  ASoC: da7213.c: add missing pm_runtime_disable()
  ASoC: hdac_hdmi: use set_stream() instead of set_tdm_slots()
  ASoC: codecs: lpass: fix the order or clks turn off during suspend
  ASoC: Intel: bytcr_rt5640: Add quirk for the Acer Iconia One 7 B1-750
  ASoC: SOF: ipc4: Ensure DSP is in D0I0 during sof_ipc4_set_get_data()
  ASoC: amd: yc: Add DMI entries to support Victus by HP Laptop 16-e1xxx (8A22)
  ASoC: soc-pcm: fix hw->formats cleared by soc_pcm_hw_init() for dpcm
  ASoC: Intel: soc-acpi: add table for Intel 'Rooks County' NUC M15
  ASOC: Intel: sof_sdw: add quirk for Intel 'Rooks County' NUC M15

Merge tag 'platform-drivers-x86-v6.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:

 -  more think-lmi fixes

 -  one DMI quirk addition

* tag 'platform-drivers-x86-v6.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: thinkpad_acpi: Add missing T14s Gen1 type to s2idle quirk list
  platform/x86: think-lmi: Clean up display of current_value on Thinkstation
  platform/x86: think-lmi: Fix memory leaks when parsing ThinkStation WMI strings
  platform/x86: think-lmi: Fix memory leak when showing current settings

Pull asm-generic fixes from Arnd Bergmann:
 "These are minor fixes to address false-positive build warnings:

  Some of the less common I/O accessors are missing __force casts and
  cause sparse warnings for their implied byteswap, and a recent change
  to __generic_cmpxchg_local() causes a warning about constant integer
  truncation"

* tag 'asm-generic-fixes-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic: avoid __generic_cmpxchg_local warnings
  asm-generic/io.h: suppress endianness warnings for relaxed accessors
  asm-generic/io.h: suppress endianness warnings for readq() and writeq()

Some DT devices already have phy device configured in the DT/ACPI.
Current implementation scans for a phy unconditionally even though
there is a phy listed in the DT/ACPI and already attached.

We should check the fwnode if there is any phy device listed in
fwnode and decide whether to scan for a phy to attach to.

Fixes: fe2cfbc9 ("net: stmmac: check if MAC needs to attach to a PHY")
Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/lkml/20230403212434.296975-1-martin.blumenstingl@googlemail.com/Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Shahab Vahedi <shahab@synopsys.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Link: https://lore.kernel.org/r/20230406024541.3556305-1-michael.wei.hong.sit@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Syzkaller report a WARNING: "WARN_ON(!direct)" in modify_ftrace_direct().

Root cause is 'direct->addr' was changed from 'old_addr' to 'new_addr' but
not restored if error happened on calling ftrace_modify_direct_caller().
Then it can no longer find 'direct' by that 'old_addr'.

To fix it, restore 'direct->addr' to 'old_addr' explicitly in error path.

Link: https://lore.kernel.org/linux-trace-kernel/20230330025223.1046087-1-zhengyejian1@huawei.com

Cc: stable@vger.kernel.org
Cc: <mhiramat@kernel.org>
Cc: <mark.rutland@arm.com>
Cc: <ast@kernel.org>
Cc: <daniel@iogearbox.net>
Fixes: 8a141dd7 ("ftrace: Fix modify_ftrace_direct.")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The alignment mask in swiotlb_do_find_slots() masks off the high
bits which are not relevant for the alignment, so multiple
requirements are combined with a bitwise OR rather than AND.
In plain English, the stricter the alignment, the more bits must
be set in iotlb_align_mask.

Confusion may arise from the fact that the same variable is also
used to mask off the offset within a swiotlb slot, which is
achieved with a bitwise AND.

Fixes: 0eee5ae1 ("swiotlb: fix slot alignment checks")
Reported-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/all/CAA42JLa1y9jJ7BgQvXeUYQh-K2mDNHd2BYZ4iZUz33r5zY7oAQ@mail.gmail.com/Reported-by: Kelsey Steele <kelseysteele@linux.microsoft.com>
Link: https://lore.kernel.org/all/20230405003549.GA21326@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net/Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Tested-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Pull NVMe fix from Christoph:

"nvme fixes for Linux 6.3

 - fix discard support without oncs (Keith Busch)"

* tag 'nvme-6.3-2023-04-06' of git://git.infradead.org/nvme:
  nvme: fix discard support without oncs

block size is one very key setting for block layer, and bad block size
could panic kernel easily.

Make sure that block size is set correctly.

Meantime if ublk_validate_params() fails, clear ub->params so that disk
is prevented from being added.

Fixes: 71f28f31 ("ublk_drv: add io_uring based userspace block driver")
Reported-and-tested-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Since SQE memory is shared with userspace, we should only be reading it
once. We cannot read it multiple times, particularly when it's read once
for validation and then read again for the actual use.

ublk_ch_uring_cmd() is safe when called as a retry operation, as the
memory backing is stable at that point. But for normal issue, we want
to ensure that we only read ublksrv_io_cmd once. Wrap the function in
a helper that reads the value into an on-stack copy of the struct.

Cc: stable@vger.kernel.org # 6.0+
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Queue reset was moved out from __init_dma_rx_desc_rings() and
__init_dma_tx_desc_rings() functions. Thus, the driver fails to transmit
and receive packet after XDP prog setup.

This commit adds the missing queue reset into stmmac_xdp_open() function.

Fixes: f9ec5723 ("net: ethernet: stmicro: stmmac: move queue reset to dedicated functions")
Cc: <stable@vger.kernel.org> # 6.0+
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230404044823.3226144-1-yoong.siang.song@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When deleting the netns and recreating a new one while re-adding the
veth interface, there is a small window of time during which the old
veth interface has not yet been removed. This can cause the new addition
to fail. To resolve this issue, we can either wait for a short while to
ensure that the old veth interface is deleted, or we can specifically
remove the veth interface.

Before this patch:
  # ./rps_default_mask.sh
  empty rps_default_mask                                      [ ok ]
  changing rps_default_mask dont affect existing devices      [ ok ]
  changing rps_default_mask dont affect existing netns        [ ok ]
  changing rps_default_mask affect newly created devices      [ ok ]
  changing rps_default_mask don't affect newly child netns[II][ ok ]
  rps_default_mask is 0 by default in child netns             [ ok ]
  RTNETLINK answers: File exists
  changing rps_default_mask in child ns don't affect the main one[ ok ]
  cat: /sys/class/net/vethC11an1/queues/rx-0/rps_cpus: No such file or directory
  changing rps_default_mask in child ns affects new childns devices./rps_default_mask.sh: line 36: [: -eq: unary operator expected
  [fail] expected 1 found
  changing rps_default_mask in child ns don't affect existing devices[ ok ]

After this patch:
  # ./rps_default_mask.sh
  empty rps_default_mask                                      [ ok ]
  changing rps_default_mask dont affect existing devices      [ ok ]
  changing rps_default_mask dont affect existing netns        [ ok ]
  changing rps_default_mask affect newly created devices      [ ok ]
  changing rps_default_mask don't affect newly child netns[II][ ok ]
  rps_default_mask is 0 by default in child netns             [ ok ]
  changing rps_default_mask in child ns don't affect the main one[ ok ]
  changing rps_default_mask in child ns affects new childns devices[ ok ]
  changing rps_default_mask in child ns don't affect existing devices[ ok ]

Fixes: 3a7d84ea ("self-tests: more rps self tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20230404072411.879476-1-liuhangbin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Not all fec MDIO bus drivers support C45 mode transactions. The older fec
hardware block in many ColdFire SoCs does not appear to support them, at
least according to most of the different ColdFire SoC reference manuals.
The bits used to generate C45 access on the iMX parts, in the OP field
of the MMFR register, are documented as generating non-compliant MII
frames (it is not documented as to exactly how they are non-compliant).

Commit 8d03ad1a ("net: fec: Separate C22 and C45 transactions")
means the fec driver will always register c45 MDIO read and write
methods. During probe these will always be accessed now generating
non-compliant MII accesses on ColdFire based devices.

Add a quirk define, FEC_QUIRK_HAS_MDIO_C45, that can be used to
distinguish silicon that supports MDIO C45 framing or not. Add this to
all the existing iMX quirks, so they will be behave as they do now (*).

(*) it seems that some iMX parts may not support C45 transactions either.
    The iMX25 and iMX50 Reference Manuals contain similar wording to
    the ColdFire Reference Manuals on this.

Fixes: 8d03ad1a ("net: fec: Separate C22 and C45 transactions")
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230404052207.3064861-1-gerg@linux-m68k.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There is a concurrency bug that may cause the wrong value to be loaded
when a CPU is modifying the maple tree.

CPU1:
mtree_insert_range()
  mas_insert()
    mas_store_root()
      ...
      mas_root_expand()
        ...
        rcu_assign_pointer(mas->tree->ma_root, mte_mk_root(mas->node));
        ma_set_meta(node, maple_leaf_64, 0, slot);    <---IP

CPU2:
mtree_load()
  mtree_lookup_walk()
    ma_data_end();

When CPU1 is about to execute the instruction pointed to by IP, the
ma_data_end() executed by CPU2 may return the wrong end position, which
will cause the value loaded by mtree_load() to be wrong.

An example of triggering the bug:

Add mdelay(100) between rcu_assign_pointer() and ma_set_meta() in
mas_root_expand().

static DEFINE_MTREE(tree);
int work(void *p) {
	unsigned long val;
	for (int i = 0 ; i< 30; ++i) {
		val = (unsigned long)mtree_load(&tree, 8);
		mdelay(5);
		pr_info("%lu",val);
	}
	return 0;
}

mt_init_flags(&tree, MT_FLAGS_USE_RCU);
mtree_insert(&tree, 0, (void*)12345, GFP_KERNEL);
run_thread(work)
mtree_insert(&tree, 1, (void*)56789, GFP_KERNEL);

In RCU mode, mtree_load() should always return the value before or after
the data structure is modified, and in this example mtree_load(&tree, 8)
may return 56789 which is not expected, it should always return NULL.  Fix
it by put ma_set_meta() before rcu_assign_pointer().

Link: https://lkml.kernel.org/r/20230314124203.91572-4-zhangpeng.00@bytedance.com
Fixes: 54a611b6 ("Maple Tree: add new data structure")
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>