- 08 Feb, 2020 6 commits
-
-
Zenghui Yu authored
V{PEND,PROP}BASER registers are actually located in VLPI_base frame of the *redistributor*. Rename their accessors to reflect this fact. No functional changes. Signed-off-by:Zenghui Yu <yuzenghui@huawei.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200206075711.1275-7-yuzenghui@huawei.com
-
Zenghui Yu authored
"ITS virtual pending table not cleaning" is already complained inside its_clear_vpend_valid(), there's no need to trigger a WARN_ON again. Signed-off-by:
-
Zenghui Yu authored
The variable 'tmp' in inherit_vpe_l1_table_from_rd() is actually not needed, drop it. Signed-off-by:
-
Zenghui Yu authored
In GICv4, we will ensure that level2 vPE table memory is allocated for the specified vpe_id on all v4 ITS, in its_alloc_vpe_table(). This still works well for the typical GICv4.1 implementation, where the new vPE table is shared between the ITSs and the RDs. To make it explicit, let us introduce allocate_vpe_l2_table() to make sure that the L2 tables are allocated on all v4.1 RDs. We're likely not need to allocate memory in it because the vPE table is shared and (L2 table is) already allocated at ITS level, except for the case where the ITS doesn't share anything (say SVPET == 0, practically unlikely but architecturally allowed). The implementation of allocate_vpe_l2_table() is mostly copied from its_alloc_table_entry(). Signed-off-by:
-
Zenghui Yu authored
Currently, we will not set vpe_l1_page for the current RD if we can inherit the vPE configuration table from another RD (or ITS), which results in an inconsistency between RDs within the same CommonLPIAff group. Let's rename it to vpe_l1_base to indicate the base address of the vPE configuration table of this RD, and set it properly for *all* v4.1 redistributors. Signed-off-by:
-
Zenghui Yu authored
The Size field of GICv4.1 VPROPBASER register indicates number of pages minus one and together Page_Size and Size control the vPEID width. Let's respect this requirement of the architecture. Signed-off-by:
-
- 03 Feb, 2020 1 commit
-
-
Zenghui Yu authored
It looks like an obvious mistake to use its_mapc_cmd descriptor when building the INVALL command block. It so far worked by luck because both its_mapc_cmd.col and its_invall_cmd.col sit at the same offset of the ITS command descriptor, but we should not rely on it. Fixes: cc2d3216 ("irqchip: GICv3: ITS command queue") Signed-off-by:
-
- 29 Jan, 2020 1 commit
-
-
Randy Dunlap authored
Fixes to Kconfig help text: - spell out "hardware" - fix verb usage Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/d44baeee-cceb-7c02-7249-e6b4817f0847@infradead.org
-
- 28 Jan, 2020 1 commit
-
-
Marc Zyngier authored
We currently allocate redistributor region structures for individual redistributors when ACPI doesn't present us with compact MMIO regions covering multiple redistributors. It turns out that we allocate these structures even when the redistributor is flagged as disabled by ACPI. It works fine until someone actually tries to tarse one of these structures, and access the corresponding MMIO region. Instead, track the number of enabled redistributors, and only allocate what is required. This makes sure that there is no invalid data to misuse. Signed-off-by:
Heyi Guo <guoheyi@huawei.com> Tested-by:
-
- 22 Jan, 2020 14 commits
-
-
Marc Zyngier authored
Just like for INVALL, GICv4.1 has grown a VPE-aware INVLPI register. Let's plumb it in and make use of the DirectLPI code in that case. Signed-off-by:
-
Marc Zyngier authored
Since GICv4.1 gives us a per-VPE doorbell, avoid programming anything else on VMOVI/VMAPI/VMAPTI and on any other action that would have otherwise resulted in a per-VLPI doorbell to be programmed. Signed-off-by:
-
Marc Zyngier authored
GICv4.1 redistributors have a VPE-aware INVALL register. Progress! We can now emulate a guest-requested INVALL without emiting a VINVALL command. Signed-off-by:
-
Marc Zyngier authored
When descheduling a VPE, special care must be taken to tell the GIC about whether we want to receive a doorbell or not. This is a major improvement on GICv4.0, where the doorbell had to be separately enabled/disabled. Signed-off-by:
-
Marc Zyngier authored
Making a VPE resident on GICv4.1 is pretty simple, as it is just a single write to the local redistributor. We just need extra information about which groups to enable, which the KVM code will have to provide. Signed-off-by:
-
Marc Zyngier authored
masking/unmasking doorbells on GICv4.1 relies on a new INVDB command, which broadcasts the invalidation to all RDs. Implement the new command as well as the masking callbacks, and plug the whole thing into the v4.1 VPE irqchip. Signed-off-by:
-
Marc Zyngier authored
Just like for GICv4.0, each VPE has its own doorbell interrupt, and thus an irqchip that manages them. Since the doorbell management is quite different on GICv4.1, let's introduce an almost empty irqchip the will get populated over the next new patches. Signed-off-by:
-
Marc Zyngier authored
With GICv4.1, VMOVP is extended to allow a default doorbell to be specified, as well as a validity bit for this doorbell. As an added bonus, VMOVP isn't required anymore of moving a VPE between redistributors that share the same affinity. Let's add this support to the VMOVP builder, and make sure we don't issue the command if we don't really need to. Signed-off-by:
-
Marc Zyngier authored
The infamous VPE proxy device isn't used with GICv4.1 because: - we can invalidate any LPI from the DirectLPI MMIO interface - the ITS and redistributors understand the life cycle of the doorbell, so we don't need to enable/disable it all the time So let's escape early from the proxy related functions. Signed-off-by:
-
Marc Zyngier authored
The ITS VMAPP command gains some new fields with GICv4.1: - a default doorbell, which allows a single doorbell to be used for all the VLPIs routed to a given VPE - a pointer to the configuration table (instead of having it in a register that gets context switched) - a flag indicating whether this is the first map or the last unmap for this particular VPE - a flag indicating whether the pending table is known to be zeroed, or not Plumb in the new fields in the VMAPP builder, and add the map/unmap refcounting so that the ITS can do the right thing. Signed-off-by:
-
Marc Zyngier authored
GICv4.1 defines a new VPE table that is potentially shared between both the ITSs and the redistributors, following complicated affinity rules. To make things more confusing, the programming of this table at the redistributor level is reusing the GICv4.0 GICR_VPROPBASER register for something completely different. The code flow is somewhat complexified by the need to respect the affinities required by the HW, meaning that tables can either be inherited from a previously discovered ITS or redistributor. Signed-off-by:
-
Marc Zyngier authored
While GICv4.0 mandates 16 bit worth of VPEIDs, GICv4.1 allows smaller implementations to be built. Add the required glue to dynamically compute the limit. Signed-off-by:
-
Marc Zyngier authored
GICv4.1 supports the RVPEID ("Residency per vPE ID"), which allows for a much efficient way of making virtual CPUs resident (to allow direct injection of interrupts). The functionnality needs to be discovered on each and every redistributor in the system, and disabled if the settings are inconsistent. Signed-off-by: -
Marc Zyngier authored
When updating an LPI configuration, get_vlpi_map() may be passed a irq_data structure relative to an ITS domain (the normal case) or one that is relative to the core GICv3 domain in the case of a GICv4 doorbell. In the latter case, special care must be take not to dereference the irq_chip data as an its_dev structure, as that isn't what is stored there. Instead, check *first* whether the IRQ is forwarded to a vcpu, and only then try to obtain the vlpi mapping. Fixes: c1d4d5cd ("irqchip/gic-v3-its: Add its_vlpi_map helpers") Signed-off-by:
-
- 20 Jan, 2020 15 commits
-
-
Kevin Hao authored
Fix a memory leak reported by kmemleak: unreferenced object 0xffff000bc6f50e80 (size 128): comm "kworker/23:2", pid 201, jiffies 4294894947 (age 942.132s) hex dump (first 32 bytes): 00 00 00 00 41 00 00 00 86 c0 03 00 00 00 00 00 ....A........... 00 a0 b2 c6 0b 00 ff ff 40 51 fd 10 00 80 ff ff ........@Q...... backtrace: [<00000000e62d2240>] kmem_cache_alloc_trace+0x1a4/0x320 [<00000000279143c9>] irq_domain_push_irq+0x7c/0x188 [<00000000d9f4c154>] thunderx_gpio_probe+0x3ac/0x438 [<00000000fd09ec22>] pci_device_probe+0xe4/0x198 [<00000000d43eca75>] really_probe+0xdc/0x320 [<00000000d3ebab09>] driver_probe_device+0x5c/0xf0 [<000000005b3ecaa0>] __device_attach_driver+0x88/0xc0 [<000000004e5915f5>] bus_for_each_drv+0x7c/0xc8 [<0000000079d4db41>] __device_attach+0xe4/0x140 [<00000000883bbda9>] device_initial_probe+0x18/0x20 [<000000003be59ef6>] bus_probe_device+0x98/0xa0 [<0000000039b03d3f>] deferred_probe_work_func+0x74/0xa8 [<00000000870934ce>] process_one_work+0x1c8/0x470 [<00000000e3cce570>] worker_thread+0x1f8/0x428 [<000000005d64975e>] kthread+0xfc/0x128 [<00000000f0eaa764>] ret_from_fork+0x10/0x18 Fixes: 495c38d3 ("irqdomain: Add irq_domain_{push,pop}_irq() functions") Signed-off-by:Kevin Hao <haokexin@gmail.com> Signed-off-by:
-
Joakim Zhang authored
The Interrupt Multiplexer (INTMUX) expands the number of peripherals that can interrupt the core: * The INTMUX has 8 channels that are assigned to 8 NVIC interrupt slots. * Each INTMUX channel can receive up to 32 interrupt sources and has 1 interrupt output. * The INTMUX routes the interrupt sources to the interrupt outputs. Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by:
Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by:
-
Joakim Zhang authored
This patch adds the DT bindings for the NXP INTMUX interrupt multiplexer for i.MX8 family SoCs. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200117060653.27485-2-qiangqing.zhang@nxp.com
-
Hyunki Koo authored
This patch is written to clean up dependency of ARCH_EXYNOS Not all exynos device have IRQ_COMBINER, especially aarch64 EXYNOS but it is built for all exynos devices. Thus add the config for EXYNOS_IRQ_COMBINER remove direct dependency between ARCH_EXYNOS and exynos-combiner.c and only selected on the aarch32 devices Signed-off-by:
Hyunki Koo <hyunki00.koo@samsung.com> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20191224211108.7128-1-hyunki00.koo@gmail.com
-
Qianggui Song authored
The meson a1 Socs have some changes compared with previous chips. For A113L, it contains 62 pins and can be spied on: - 62:128 undefined - 61:50 12 pins on bank A - 49:37 13 pins on bank F - 36:20 17 pins on bank X - 19:13 7 pins on bank B - 12:0 13 pins on bank P There are five relative registers for gpio interrupt controller, details are as below: - PADCTRL_GPIO_IRQ_CTRL0 bit[31]: enable/disable the whole irq lines bit[16-23]: both edge trigger bit[8-15]: single edge trigger bit[0-7]: pol trigger - PADCTRL_GPIO_IRQ_CTRL[X] bit[0-6]: 7 bits to choose gpio source for irq line 2*[X] - 2 bit[16-22]: 7 bits to choose gpio source for irq line 2*[X] - 1 where X =1,2,3,4 Signed-off-by:
Qianggui Song <qianggui.song@amlogic.com> Signed-off-by:
-
Qianggui Song authored
Since Meson-A1 SoCs register layout of gpio interrupt controller has difference with previous chips, registers to decide irq line and offset of trigger method are all changed, the current driver should be modified. Signed-off-by:
-
Qianggui Song authored
Update dt-binding document for GPIO interrupt controller of Meson-A1 SoCs Signed-off-by:
-
John Garry authored
The following crash can be seen for setting CONFIG_DEBUG_TEST_DRIVER_REMOVE=y for DT FW (which some people still use): Hisilicon MBIGEN-V2 60080000.interrupt-controller: Failed to create mbi-gen irqdomain Hisilicon MBIGEN-V2: probe of 60080000.interrupt-controller failed with error -12 [...] Unable to handle kernel paging request at virtual address 0000000000005008 Mem abort info: ESR = 0x96000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000041fb9990000 [0000000000005008] pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.5.0-rc6-00002-g3fc42638a506-dirty #1622 Hardware name: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT21 Nemo 2.0 RC0 04/18/2018 pstate: 40000085 (nZcv daIf -PAN -UAO) pc : mbigen_set_type+0x38/0x60 lr : __irq_set_trigger+0x6c/0x188 sp : ffff800014b4b400 x29: ffff800014b4b400 x28: 0000000000000007 x27: 0000000000000000 x26: 0000000000000000 x25: ffff041fd83bd0d4 x24: ffff041fd83bd188 x23: 0000000000000000 x22: ffff80001193ce00 x21: 0000000000000004 x20: 0000000000000000 x19: ffff041fd83bd000 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffff8000119098c8 x14: ffff041fb94ec91c x13: ffff041fb94ec1a1 x12: 0000000000000030 x11: 0101010101010101 x10: 0000000000000040 x9 : 0000000000000000 x8 : ffff041fb98c6680 x7 : ffff800014b4b380 x6 : ffff041fd81636c8 x5 : 0000000000000000 x4 : 000000000000025f x3 : 0000000000005000 x2 : 0000000000005008 x1 : 0000000000000004 x0 : 0000000080000000 Call trace: mbigen_set_type+0x38/0x60 __setup_irq+0x744/0x900 request_threaded_irq+0xe0/0x198 pcie_pme_probe+0x98/0x118 pcie_port_probe_service+0x38/0x78 really_probe+0xa0/0x3e0 driver_probe_device+0x58/0x100 __device_attach_driver+0x90/0xb0 bus_for_each_drv+0x64/0xc8 __device_attach+0xd8/0x138 device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 device_add+0x4c4/0x770 device_register+0x1c/0x28 pcie_port_device_register+0x1e4/0x4f0 pcie_portdrv_probe+0x34/0xd8 local_pci_probe+0x3c/0xa0 pci_device_probe+0x128/0x1c0 really_probe+0xa0/0x3e0 driver_probe_device+0x58/0x100 __device_attach_driver+0x90/0xb0 bus_for_each_drv+0x64/0xc8 __device_attach+0xd8/0x138 device_attach+0x10/0x18 pci_bus_add_device+0x4c/0xb8 pci_bus_add_devices+0x38/0x88 pci_host_probe+0x3c/0xc0 pci_host_common_probe+0xf0/0x208 hisi_pcie_almost_ecam_probe+0x24/0x30 platform_drv_probe+0x50/0xa0 really_probe+0xa0/0x3e0 driver_probe_device+0x58/0x100 device_driver_attach+0x6c/0x90 __driver_attach+0x84/0xc8 bus_for_each_dev+0x74/0xc8 driver_attach+0x20/0x28 bus_add_driver+0x148/0x1f0 driver_register+0x60/0x110 __platform_driver_register+0x40/0x48 hisi_pcie_almost_ecam_driver_init+0x1c/0x24 The specific problem here is that the mbigen driver real probe has failed as the mbigen_of_create_domain()->of_platform_device_create() call fails, the reason for that being that we never destroyed the platform device created during the remove test dry run and there is some conflict. Since we generally would never want to unbind this driver, and to save adding a driver tear down path for that, just set the driver .suppress_bind_attrs member to avoid this possibility. Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/1579196323-180137-1-git-send-email-john.garry@huawei.com
-
Eddie James authored
The Aspeed SOCs provide some interrupts through the System Control Unit registers. Add an interrupt controller that provides these interrupts to the system. Signed-off-by:
Eddie James <eajames@linux.ibm.com> Signed-off-by:
Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/1579123790-6894-3-git-send-email-eajames@linux.ibm.com
-
Eddie James authored
Document the Aspeed SCU interrupt controller and add an include file for the interrupts it provides. Signed-off-by:
-
Yash Shah authored
Adds the GPIO driver for SiFive RISC-V SoCs. Signed-off-by:
Wesley W. Terpstra <wesley@sifive.com> [Atish: Various fixes and code cleanup] Signed-off-by:
Atish Patra <atish.patra@wdc.com> Signed-off-by:
Yash Shah <yash.shah@sifive.com> Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/1575976274-13487-6-git-send-email-yash.shah@sifive.com
-
Yash Shah authored
DT json-schema for GPIO controller added. Signed-off-by:
-
Yash Shah authored
Add support for hierarchical irq domains. This is needed as pre-requisite for gpio-sifive driver. Signed-off-by:
-
Yash Shah authored
Make use of newly introduced irq_domain_translate_onecell() instead of custom made function. Signed-off-by:
-
Yash Shah authored
Add a new function irq_domain_translate_onecell() that is to be used as the translate function in struct irq_domain_ops. Signed-off-by:
-
- 29 Dec, 2019 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Paul Walmsley: "One important fix for RISC-V: - Redirect any incoming syscall with an ID less than -1 to sys_ni_syscall, rather than allowing them to fall through into the syscall handler. and two minor build fixes: - Export __asm_copy_{from,to}_user() from where they are defined. This fixes a build error triggered by some randconfigs. - Export flush_icache_all(). I'd resisted this before, since historically we didn't want modules to be able to flush the I$ directly; but apparently everyone else is doing it now" * tag 'riscv/for-v5.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: export flush_icache_all to modules riscv: reject invalid syscalls below -1 riscv: fix compile failure with EXPORT_SYMBOL() & !MMU
-
