- this fixes few sparse warnings for missing static in functions:

drivers/staging/lustre/lnet/lnet/api-ni.c:63:6: warning: symbol 'lnet_get_routes' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/api-ni.c:69:6: warning: symbol 'lnet_get_networks' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/api-ni.c:93:1: warning: symbol 'lnet_init_locks' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/api-ni.c:102:1: warning: symbol 'lnet_fini_locks' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/api-ni.c:180:6: warning: symbol 'lnet_assert_wire_constants' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/api-ni.c:273:7: warning: symbol 'lnet_find_lnd_by_type' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/api-ni.c:419:1: warning: symbol 'lnet_create_interface_cookie' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/api-ni.c:450:1: warning: symbol 'lnet_res_container_cleanup' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/api-ni.c:494:1: warning: symbol 'lnet_res_container_setup' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/api-ni.c:612:1: warning: symbol 'lnet_prepare' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/api-ni.c:917:1: warning: symbol 'lnet_shutdown_lndnis' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/api-ni.c:1034:1: warning: symbol 'lnet_startup_lndnis' was not declared. Should it be static?
Signed-off-by: Anil Belur <askb23@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sparse warning corrections: NULL-pointers as NULL instead of static 0's.
Signed-off-by: Sami Laine <laine.j.sami@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch moves the doubled if block inside the retval-checking one
level up.

As the if-else-block it was in is now a one-statement if-else block,
I removed the braces from it.
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The inner if-statement was aligned just like the outer one. Why?

This indention was introduced by

    f34c488c

which is a indention-fix patch itself. That's why I'm curious about it.

I did not merge these nested if-statements, as I don't know if I'm
destroying logical seperated checks with it.
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes some indentation errors, where multi-line statements
where not indented.
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move to vnt_add_interface and allow to refresh at the start
of every software scan in vnt_sw_scan_start
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vnt_set_bss_mode changes the state of abyBBVGA so move
BBvSetVGAGainOffset to the function.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver never sets basic rate any more so remove function.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove work_struct and queue variables

Remove EnqueueRCB and DequeueRCB macros
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In s_nsBulkInUsbIoCompleteRead reuse or reallocate sb_buff and resubmit
urb.

In device_alloc_bufs allocate memory to rcb individually and
call PIPEnsBulkInUsbRead to submit the urbs

Change handling to free rcb in device_free_rx_bufs

Remove calls to workqueue.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is assigned later in function and should have been removed in
an out-of-tree merge.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use base type to __le16 and do endian correction.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace with ccmp_pn with size of IEEE80211_CCMP_PN_LEN(6)

memcpy the struct ieee80211_key_seq -> ccmp.pn onto ccmp_pn
removing the need for endian conversion.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function is only called by comedi drivers during the (*detach) of the
driver. After it is called mite_free() is always called to kfree the allocated
mite_struct pointer.

Rename this function to mite_detach() and merge the kfree() from mite_free()
into it.

Remove the unnecessary clearing of the mite variables since the mite pointer
is going to be kfree()'d anyway.

The mite_detach() function checks if the pointer is valid so remove the
unnecessary checks in the callers.

The check can also be removed in ni_660x since the ni_660x_free_mite_rings()
function does not actually need the 'mite' pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This inline function is not used. Just remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This inline function simply returns the 'irq' of the struct pci_dev pointer
that is stored in struct mite_struct. This pci_dev pointer is the same as
the one that is already available in the (*auto_attach) functions where
mite_irq() is used.

Use the pci_dev pointer directly to get the irq and remove the unnecessary
inline function to remove the indirection.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These defines were probably intended to be used so that ni_mio_common.c
could detect if it was included by a driver that uses ioport or memory
mapped register access. This can actually be detected by checking if
the 'mite' member in the private data has been allocated.

Regardless, the symbols are not used. Just remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These defines were probably intended to be used so that ni_mio_common.c
could detect if it was included by a driver that uses ioport or memory
mapped register access. This can actually be detected by checking if
the 'mite' member in the private data has been allocated.

Regardless, the symbols are not used. Just remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These defines were probably intended to be used so that ni_mio_common.c
could detect if it was included by a driver that uses ioport or memory
mapped register access. This can actually be detected by checking if
the 'mite' member in the private data has been allocated.

Regardless, the symbols are not used. Just remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This define is not used ny the driver. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

By convention, the first member of the boardinfo is a 'const char *' to
the board name, especially for those comedi drivers that rely on the
comedi core to set dev->board_ptr to the entry matching the board name
when doing a legacy (*attach) to a comedi driver.

Modify the ni_board_struct appropriately for consistency, although the
board name is only used for informational purposes by this driver (only
the driver name is matched by the comedi core).

For aesthetics, also move the members in the boardinfo declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, add some whitespace to the boardinfo declaration.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This define is not used by the driver. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This define is only used in the comedi_request_region() to specify the
size of the region. Remove the define and just open code the value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove all the boardinfo data the is set to '0'. They will default
to that when the boardinfo is declared.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pass the irq_polarity to ni_E_init() and remove the defines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These defines are only used in the request_irq() calls. Remove them
and just open code the values.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pass the 'interrupt_pin' to ni_E_init() and remove the macros.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move some functions to avoid the need for the forward declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-3.17b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second round of new drivers and cleanups for IIO in the 3.17 cycle.

New drivers
* mcp4902, mcp4912 and mcp4922 SPI DAC driver.
* max1027, max1029 and max1031 SPI ADC driver.

Cleanups
* cm32181 - use devm APIs to simplify error paths.
* ak8975 - use devm APIs to simplify error paths.
* ad9850 - drop some unused defines and an unnecessary goto.
* hmc5843 - add missing devices to the device id table and the documentation.
* ad9832 - small formatting cleanups.
* sca3000 - hide direct use of the stufftoread element by adding a
    data_available function.  This is a precursor for the addition of buffer
    watermarks to the subsystem but stands as a good cleanup on its own.

Change sca3000_ring implementation so that it exports a data_available
function to iio.
Signed-off-by: Josselin Costanzi <josselin.costanzi@mobile-devices.fr>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Fix some little style issues in drivers/staging/iio/frequency/ad9832.c .
This is my latest task of the eudyptula challenge (third attempt!)
Signed-off-by: Federico Di Pierro <nierro92@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This patch use devm_* APIs make driver simpler.
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

checkpath.pl was complaining about value_mask:
ERROR: Macros with complex values should be enclosed in parenthesis

I fixed this by simply removing it since it's not used (as well as another
macro).  Got rid of the un-necessary error_ret label as well.
Signed-off-by: Guillaume Morin <guillaume@morinfr.org>
Reported-by: Michael Welling <mwelling@ieee.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

The driver hasn't been cleaned up and nobody is working to do so, so
remove it.
Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>