- 03 Aug, 2010 40 commits
-
-
Arjan van de Ven authored
The stack buffer for IPC messages was 16 bytes, limiting messages to a size of 4 (each message is 32 bit). However, the touch screen driver is trying to send messages of size 5.... (AC: Set to 20 bytes having checked the max size allowed) Signed-off-by:
Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Alan Cox authored
This provides an architecture level board identify function to replace the cpuid direct usage Signed-off-by:
-
Sreedhara DS authored
Delete unused constants IPC_CMD_INDIRECT_RD and IPC_CMD_INDIRECT_WR Remove multiple inclusion of header file "asm/mrst.h" Signed-off-by:
Sreedhara DS <sreedhara.ds@intel.com> Signed-off-by:
-
Sreedhara DS authored
The firmware of production devices does not support this interface so this is dead code. Signed-off-by:
-
Sreedhara DS authored
Changes to work on bothMmoorestown and Medfield New pci id added for Medfield Return type of ipc_data_readl chnaged from u8 to u32 Signed-off-by:
-
Sreedhara DS authored
Intel SCU message formats depend upon the processor type. Replace the module option with automatic detection of the processor type. Signed-off-by:
-
Jan Engelhardt authored
My .config contains ACER_WMI=m. On SPARC. That does not make sense. Restrict the x86 platform driver menu to x86. Signed-off-by:
Jan Engelhardt <jengelh@medozas.de> Signed-off-by:
-
Thomas Renninger authored
- Set Kconfig option default n - Only allow root to read/write io file (sever bug!) - Introduce write support module param -> default off - Properly clean up if any debugfs files cannot be created Signed-off-by:
Thomas Renninger <trenn@suse.de> CC: mjg59@srcf.ucam.org CC: platform-driver-x86@vger.kernel.org CC: linux-acpi@vger.kernel.org CC: astarikovskiy@suse.de Signed-off-by:
-
Thomas Renninger authored
which will result in a harmless but ugly WARN message on some machines. Signed-off-by:
-
Thomas Renninger authored
Signed-off-by:
-
Thomas Renninger authored
This should have been an "and". Additionally checking for !obj is even better. Signed-off-by:
-
Axel Lin authored
Make dell_laptop_i8042_filter() static as it's used only in dell-laptop.c Signed-off-by:
Axel Lin <axel.lin@gmail.com> Signed-off-by:
-
Axel Lin authored
This patch includes below fixes: 1. return -ENOMEM instead of 0 if input_allocate_device fail. 2. fix wrong goto if sparse_keymap_setup fail. 3. fix wrong goto if input_register_device fail. Signed-off-by:
-
Axel Lin authored
backlight is needlessly defined global. This patch makes the symbol static. Signed-off-by:
Anisse Astier <anisse@astier.eu> Signed-off-by:
-
Pierre Ducroquet authored
Add support for Toshiba Illumination. This is a set of LEDs installed on some Toshiba laptops. It is controlled through ACPI, the commands has been found through reverse engineering. It has been tested on a Toshiba Qosmio G50-122. Signed-off-by:
Pierre Ducroquet <pinaraf@pinaraf.info> Signed-off-by:
-
Randy Dunlap authored
compal-laptop uses power_supply interfaces so it should depend on POWER_SUPPLY. ERROR: "power_supply_register" [drivers/platform/x86/compal-laptop.ko] undefined! ERROR: "power_supply_unregister" [drivers/platform/x86/compal-laptop.ko] undefined! Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: platform-driver-x86@vger.kernel.org Signed-off-by:
-
Alek Du authored
Moorestown has PMIC chip which contains GPIO blocks. The PMIC chip is connected to Langwell by SPI interface. So this GPIO driver will be regarded as SPI GPIO expander though the actual GPIO access is through IPC and SRAM. The SPI master contoller will probe this device driver by parsing SPIB table. Cleaned up for new IPC, GPE removed and some printk and other tidying by Alan Cox. Fixes for points noted by Matthew Garrett Signed-off-by:
Alek Du <alek.du@intel.com> Signed-off-by:
-
Thomas Renninger authored
Formerly these have been exposed through /proc/.. Better register them where all IO ports should get registered and scream loud if someone else claims to use them. EC data and command port typically should show up like this then: ... 0060-0060 : keyboard 0062-0062 : EC data 0064-0064 : keyboard 0066-0066 : EC command 0070-0071 : rtc0 ... Signed-off-by:
-
Thomas Renninger authored
A userspace app to easily read/write the EC can be found here: ftp://ftp.suse.com/pub/people/trenn/sources/ec/ec_access.c Multiple ECs are not supported, but shouldn't be hard to add as soon as the ec driver itself will support them. Signed-off-by:
-
Thomas Renninger authored
This patch provides the same information through debugfs, which previously was provided through /proc/acpi/embedded_controller/*/info This is the gpe the EC is connected to and whether the global lock gets used. The io ports used are added to /proc/ioports in another patch. Beside the fact that /proc/acpi is deprecated for quite some time, this info is not needed for applications and thus can be moved to debugfs instead of a public interface like /sys. Signed-off-by:
-
Thomas Renninger authored
Signed-off-by:
-
Thomas Renninger authored
The .add function must not be declared __init. Signed-off-by:
-
Thomas Renninger authored
There is a general interface for that now (provided by other patches in this patch series): /sys/kernel/debug/ec/*/io Signed-off-by:
-
Thomas Renninger authored
Other patches in this series add the same info to /sys/... and /proc/ioports. The info removed should never have been used in an application, eventually someone read it manually. /proc/acpi is deprecated for more than a year anyway... Signed-off-by:
-
Axel Lin authored
In current implementation, acpi_pcc_write_sset return 1 if write is successful, 0 if write is failed. But all the callers consider acpi_pcc_write_sset return 0 if write is successful and return negtive if write is failed. This patch changes the implementation of acpi_pcc_write_sset to return 0 if write is successful, -EIO if write is failed. Signed-off-by:
-
Axel Lin authored
The hotplug_disabled module parameter is determinated at the module load time. Change the value after the module is loaded does not make sense and has no effect at all, thus set the permissions to 0444 instead of 0644. Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Axel Lin authored
The wapf module parameters defines the behavior of the Fn+Fx wlan key. The wlan_status and bluetooth_status module parameters are for setting the wlan/bluetooth status on boot. All above module parameters are determinated only at the module load time. Change the value after the module is loaded does not make sense and has no effect at all, thus set the permissions to 0444 instead of 0644. Signed-off-by:
-
Axel Lin authored
Remove non-used acer_quirks struct definition. Signed-off-by:
-
Axel Lin authored
When acpi_evaluate_object() is passed ACPI_ALLOCATE_BUFFER, the caller must kfree the returned buffer if AE_OK is returned. Call Trace: wmab_execute -> wmi_evaluate_method -> acpi_evaluate_object Thus if callers of wmab_execute() pass ACPI_ALLOCATE_BUFFER, the return buffer must be kfreed if wmab_execute return AE_OK. [akpm@linux-foundation.org: avoid multiple return points, remove unneeded cast, remove unneeded initialisation of `status'] Signed-off-by:Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Matthew Garrett <mjg@redhat.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by:
-
Axel Lin authored
When acpi_evaluate_object() is passed ACPI_ALLOCATE_BUFFER, the caller must kfree the returned buffer if AE_OK is returned. The callers of wmi_query_block() pass ACPI_ALLOCATE_BUFFER, and thus must check its return value before accessing or kfree() on the buffer. This patch adds a missing kfree(out.pointer) before exit WMID_set_capabilities() and get_wmid_devices(). Signed-off-by:
-
Axel Lin authored
toshiba_acpi: rename add_device() and remove_device() to create_toshiba_proc_entries() and remove_toshiba_proc_entries() To improve readability rename add_device() to create_toshiba_proc_entries() and rename remove_device() to remove_toshiba_proc_entries(). Signed-off-by:
-
Axel Lin authored
Add error checking and return -ENOMEM if input_allocate_device() fail. Signed-off-by:
-
Axel Lin authored
remove_device() and add_device() are not related to ACPI APIs, it does not make sense to return acpi_status for both functions. Current implementation of add_device() always AE_OK, thus the return value checking for add_device() always return false for ACPI_FAILURE(status). This patch makes add_device() to be void and remove the unnecessary return value checking. remove_proc_entry() won't fail, thus change remove_device() to be void. Signed-off-by:
-
Axel Lin authored
Fix resource reclaim in below cases: 1. acerhdf_register_platform() does not properly handle platform_device_alloc() failure and platform_device_add() failure This patch adds error handing for acerhdf_register_platform(). 2. acerhdf_register_platform() return err with acerhdf_dev == NULL. as a result, acerhdf_unregister_platform() does not do resource reclaim in acerhdf_init() error path. This patch adds error handing for acerhdf_register_platform(), thus correct the error handing path in acerhdf_init(). goto out_err instead of err_unreg if acerhdf_register_platform() fail. 3. platform_device_del() should only used in error handling. Current implementation missed a platform_device_put() in acerhdf_exit. This patch fixes it by using platform_device_unregister() instead of platform_device_del() in acerhdf_unregister_platform. Signed-off-by:
Peter Feuerer <peter@piie.net> Cc: Matthew Garrett <mjg@redhat.com> Acked-by:
Borislav Petkov <bp@alien8.de> Signed-off-by:
-
Axel Lin authored
In current implementation, store_ledd() does not return error if write_acpi_int fail. This patch fixes it by return -ENODEV if write_acpi_int fail. Signed-off-by:
-
Axel Lin authored
According to the comments of write_acpi_int_ret(), write_acpi_int_ret() should return 0 if write is successful, -1 else. Thus if handle is NULL, the write does not happen, it should return -1. Signed-off-by:
-
Axel Lin authored
rfkill uses a const struct rfkill_ops pointer. Signed-off-by:
-
Axel Lin authored
The following symbols are needlessly defined global: logolamp_led kblamps_led This patch makes the symbols static. Signed-off-by:
Jonathan Woithe <jwoithe@physics.adelaide.edu.au> Signed-off-by:
-
Axel Lin authored
cmpc_accel_sensitivity_attr is needlessly defined global. This patch makes the symbol static. Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Daniel Oliveira Nascimento <don@syst.com.br> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by:
-
Axel Lin authored
The following symbols are needlessly defined global: thz_dev cl_dev acerhdf_dev acerhdf_dev_ops acerhdf_cooling_ops This patch makes the symbols static. Signed-off-by:
-
