- 18 Dec, 2023 7 commits
-
-
Stefan Binding authored
These models use 2xCS35L41amps with HDA using SPI and I2C. Models use internal and external boost. All models require DSD support to be added inside cs35l41_hda_property.c Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231218151221.388745-6-sbinding@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Stefan Binding authored
Add new model entries into configuration table. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231218151221.388745-5-sbinding@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Stefan Binding authored
These models use 2xCS35L41amps with HDA using SPI and I2C. All models use Internal Boost. Some models also use Realtek Speakers in conjunction with CS35L41. All models require DSD support to be added inside cs35l41_hda_property.c Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231218151221.388745-4-sbinding@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Stefan Binding authored
Add new model entries into configuration table. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231218151221.388745-3-sbinding@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Stefan Binding authored
This make use of the CS35L41 HDA Property framework, which supports laptops which do not have the _DSD properties in their ACPI. Add configuration table to be able to use a generic function which allows laptops to be supported just by adding an entry into the table. Use configuration table function for existing system 103C89C6. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231218151221.388745-2-sbinding@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Ghanshyam Agrawal authored
A statement used %d print formatter where %s should have been used. The same has been fixed in this commit. Signed-off-by: Ghanshyam Agrawal <ghanshyam1898@gmail.com> Link: 5aaf9eff ("kselftest: alsa: Add simplistic test for ALSA mixer controls kselftest") Link: https://lore.kernel.org/r/20231217080019.1063476-1-ghanshyam1898@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Jeremie Knuesel authored
Increase the quirk delay from 2 seconds to 4 seconds. This reflects a change in the Windows driver in which the delay was increased to about 3.7 seconds. The larger delay fixes an issue where the device fails to work unless it was powered up early during boot. Also clarify in the quirk comment that the quirk is only applied to older devices (USB ID 07fd:0008). Signed-off-by: Jeremie Knuesel <knuesel@gmail.com> Suggested-by: Alexander Tsoy <alexander@tsoy.me> Cc: <stable@vger.kernel.org> Link: https://bugzilla.kernel.org/show_bug.cgi?id=211975 Link: https://lore.kernel.org/r/20231217112243.33409-1-knuesel@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 15 Dec, 2023 2 commits
-
-
Gergo Koteles authored
Currently, cur_prog/cur_conf remains at the default value (-1), while program 0 has been loaded into the amplifiers. In the playback hook, tasdevice_tuning_switch tries to restore the cur_prog/cur_conf. In the runtime_resume/system_resume, tasdevice_prmg_load tries to load the cur_prog as well. Set cur_prog and cur_conf to 0 if available in the firmware. Fixes: 5be27f1e ("ALSA: hda/tas2781: Add tas2781 HDA driver") CC: stable@vger.kernel.org Signed-off-by: Gergo Koteles <soyer@irl.hu> Link: https://lore.kernel.org/r/038add0bdca1f979cc7abcce8f24cbcd3544084b.1702596646.git.soyer@irl.huSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Clément Villeret authored
Asus ROG Flowx13 (GV302XA) seems require same patch as others asus products Signed-off-by: Clément Villeret <clement.villeret@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/0a27bf4b-3056-49ac-9651-ebd7f3e36328@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 14 Dec, 2023 2 commits
-
-
Gergo Koteles authored
Calling component_add starts loading the firmware, the callback function writes the program to the amplifiers. If the module resets the amplifiers after component_add, it happens that one of the amplifiers does not work because the reset and program writing are interleaving. Call tas2781_reset before component_add to ensure reliable initialization. Fixes: 5be27f1e ("ALSA: hda/tas2781: Add tas2781 HDA driver") CC: stable@vger.kernel.org Signed-off-by: Gergo Koteles <soyer@irl.hu> Link: https://lore.kernel.org/r/4d23bf58558e23ee8097de01f70f1eb8d9de2d15.1702511246.git.soyer@irl.huSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Gergo Koteles authored
If the module can load the RCA but not the firmware binary, it will call the cleanup functions. Then unloading the module causes general protection fault due to double free. Do not call the cleanup functions in tasdev_fw_ready. general protection fault, probably for non-canonical address 0x6f2b8a2bff4c8fec: 0000 [#1] PREEMPT SMP NOPTI Call Trace: <TASK> ? die_addr+0x36/0x90 ? exc_general_protection+0x1c5/0x430 ? asm_exc_general_protection+0x26/0x30 ? tasdevice_config_info_remove+0x6d/0xd0 [snd_soc_tas2781_fmwlib] tas2781_hda_unbind+0xaa/0x100 [snd_hda_scodec_tas2781_i2c] component_unbind+0x2e/0x50 component_unbind_all+0x92/0xa0 component_del+0xa8/0x140 tas2781_hda_remove.isra.0+0x32/0x60 [snd_hda_scodec_tas2781_i2c] i2c_device_remove+0x26/0xb0 Fixes: 5be27f1e ("ALSA: hda/tas2781: Add tas2781 HDA driver") CC: stable@vger.kernel.org Signed-off-by: Gergo Koteles <soyer@irl.hu> Link: https://lore.kernel.org/r/1a0885c424bb21172702d254655882b59ef6477a.1702510018.git.soyer@irl.huSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 11 Dec, 2023 1 commit
-
-
Gergo Koteles authored
The code does not properly check whether the calibration variable is available in the EFI. If it is not available, it causes a NULL pointer dereference. Check the return value of the first get_variable call also. BUG: kernel NULL pointer dereference, address: 0000000000000000 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? srso_alias_return_thunk+0x5/0x7f ? schedule+0x5e/0xd0 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? crc32_body+0x2c/0x120 ? tas2781_save_calibration+0xe4/0x220 [snd_hda_scodec_tas2781_i2c] tasdev_fw_ready+0x1af/0x280 [snd_hda_scodec_tas2781_i2c] request_firmware_work_func+0x59/0xa0 Fixes: 5be27f1e ("ALSA: hda/tas2781: Add tas2781 HDA driver") CC: stable@vger.kernel.org Signed-off-by: Gergo Koteles <soyer@irl.hu> Link: https://lore.kernel.org/r/f1f6583bda918f78556f67d522ca7b3b91cebbd5.1702251102.git.soyer@irl.huSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 10 Dec, 2023 4 commits
-
-
Gergo Koteles authored
Unloading then loading the module causes a NULL ponter dereference. The hda_unbind zeroes the hda_component, later the hda_bind tries to dereference the codec field. The hda_component is only initialized once by tas2781_generic_fixup. Set only previously modified fields to NULL. BUG: kernel NULL pointer dereference, address: 0000000000000322 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? tas2781_hda_bind+0x59/0x140 [snd_hda_scodec_tas2781_i2c] component_bind_all+0xf3/0x240 try_to_bring_up_aggregate_device+0x1c3/0x270 __component_add+0xbc/0x1a0 tas2781_hda_i2c_probe+0x289/0x3a0 [snd_hda_scodec_tas2781_i2c] i2c_device_probe+0x136/0x2e0 Fixes: 5be27f1e ("ALSA: hda/tas2781: Add tas2781 HDA driver") Cc: stable@vger.kernel.org Signed-off-by: Gergo Koteles <soyer@irl.hu> Link: https://lore.kernel.org/r/8b8ed2bd5f75fbb32e354a3226c2f966fa85b46b.1702156522.git.soyer@irl.huSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Hartmut Knaack authored
The HP laptop 15-db0403ng uses the ALC236 codec and controls the mute LED using COEF 0x07 index 1. Sound card subsystem: Hewlett-Packard Company Device [103c:84ae] Use the existing quirk for this model. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/e61815d0-f1c7-b164-e49d-6ca84771476a@gmx.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Kai Vehmanen authored
On ASUSTeK Z170M PLUS and Z170 PRO GAMING systems, the display codec pins are not registered properly without the force-connect quirk. The codec will report only one pin as having external connectivity, but i915 finds all three connectors on the system, so the two drivers are not in sync. Issue found with DRM igt-gpu-tools test kms_hdmi_inject@inject-audio. Link: https://gitlab.freedesktop.org/drm/intel/-/issues/9801 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Saarinen <jani.saarinen@intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20231208132127.2438067-3-kai.vehmanen@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Kai Vehmanen authored
Add one more older NUC model that requires quirk to force all pins to be connected. The display codec pins are not registered properly without the force-connect quirk. The codec will report only one pin as having external connectivity, but i915 finds all three connectors on the system, so the two drivers are not in sync. Issue found with DRM igt-gpu-tools test kms_hdmi_inject@inject-audio. Link: https://gitlab.freedesktop.org/drm/igt-gpu-tools/-/issues/3 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Saarinen <jani.saarinen@intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20231208132127.2438067-2-kai.vehmanen@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 07 Dec, 2023 3 commits
-
-
Takashi Iwai authored
Lenovo Yoga Pro 7 14APH8 (PCI SSID 17aa:3882) seems requiring the similar workaround like Yoga 9 model for the bass speaker. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/CAGGk=CRRQ1L9p771HsXTN_ebZP41Qj+3gw35Gezurn+nokRewg@mail.gmail.com Link: https://lore.kernel.org/r/20231207182035.30248-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Ivan Orlov authored
Stop timer in the 'trigger' and 'sync_stop' callbacks since we want the timer to be stopped before the DMA buffer is released. Otherwise, it could trigger a kernel panic in some circumstances, for instance when the DMA buffer is already released but the timer callback is still running. Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com> Link: https://lore.kernel.org/r/20231206223211.12761-1-ivan.orlov0322@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Mario Limonciello authored
The Framework 16" laptop has the same controller as other Framework models. Apply the presence detection quirk. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20231206193927.2996-1-mario.limonciello@amd.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 06 Dec, 2023 3 commits
-
-
Tim Bosse authored
The Framework Laptop 13 (AMD Ryzen 7040Series) has an ALC295 with a disconnected or faulty headset mic presence detect similar to the previous models. It works with the same quirk chain as 309d7363. This model has a VID:PID of f111:0006. Signed-off-by: Tim Bosse <flinn@timbos.se> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20231206142629.388615-1-flinn@timbos.seSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Merge tag 'asoc-fix-v6.7-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.7 A crop of fixes for v6.7, one core fix for a merge issue and a bunch of driver specific fixes and new IDs, mostly for x86 platforms.
-
Jason Zhang authored
The pcm state can be SNDRV_PCM_STATE_DISCONNECTED at disconnect callback, and there is not an entry of SNDRV_PCM_STATE_DISCONNECTED in snd_pcm_state_names. This patch adds the missing entry to resolve this issue. cat /proc/asound/card2/pcm0p/sub0/status That results in stack traces like the following: [ 99.702732][ T5171] Unexpected kernel BRK exception at EL1 [ 99.702774][ T5171] Internal error: BRK handler: f2005512 [#1] PREEMPT SMP [ 99.703858][ T5171] Modules linked in: bcmdhd(E) (...) [ 99.747425][ T5171] CPU: 3 PID: 5171 Comm: cat Tainted: G C OE 5.10.189-android13-4-00003-g4a17384380d8-ab11086999 #1 [ 99.748447][ T5171] Hardware name: Rockchip RK3588 CVTE V10 Board (DT) [ 99.749024][ T5171] pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 99.749616][ T5171] pc : snd_pcm_substream_proc_status_read+0x264/0x2bc [ 99.750204][ T5171] lr : snd_pcm_substream_proc_status_read+0xa4/0x2bc [ 99.750778][ T5171] sp : ffffffc0175abae0 [ 99.751132][ T5171] x29: ffffffc0175abb80 x28: ffffffc009a2c498 [ 99.751665][ T5171] x27: 0000000000000001 x26: ffffff810cbae6e8 [ 99.752199][ T5171] x25: 0000000000400cc0 x24: ffffffc0175abc60 [ 99.752729][ T5171] x23: 0000000000000000 x22: ffffff802f558400 [ 99.753263][ T5171] x21: ffffff81d8d8ff00 x20: ffffff81020cdc00 [ 99.753795][ T5171] x19: ffffff802d110000 x18: ffffffc014fbd058 [ 99.754326][ T5171] x17: 0000000000000000 x16: 0000000000000000 [ 99.754861][ T5171] x15: 000000000000c276 x14: ffffffff9a976fda [ 99.755392][ T5171] x13: 0000000065689089 x12: 000000000000d72e [ 99.755923][ T5171] x11: ffffff802d110000 x10: 00000000000000e0 [ 99.756457][ T5171] x9 : 9c431600c8385d00 x8 : 0000000000000008 [ 99.756990][ T5171] x7 : 0000000000000000 x6 : 000000000000003f [ 99.757522][ T5171] x5 : 0000000000000040 x4 : ffffffc0175abb70 [ 99.758056][ T5171] x3 : 0000000000000001 x2 : 0000000000000001 [ 99.758588][ T5171] x1 : 0000000000000000 x0 : 0000000000000000 [ 99.759123][ T5171] Call trace: [ 99.759404][ T5171] snd_pcm_substream_proc_status_read+0x264/0x2bc [ 99.759958][ T5171] snd_info_seq_show+0x54/0xa4 [ 99.760370][ T5171] seq_read_iter+0x19c/0x7d4 [ 99.760770][ T5171] seq_read+0xf0/0x128 [ 99.761117][ T5171] proc_reg_read+0x100/0x1f8 [ 99.761515][ T5171] vfs_read+0xf4/0x354 [ 99.761869][ T5171] ksys_read+0x7c/0x148 [ 99.762226][ T5171] __arm64_sys_read+0x20/0x30 [ 99.762625][ T5171] el0_svc_common+0xd0/0x1e4 [ 99.763023][ T5171] el0_svc+0x28/0x98 [ 99.763358][ T5171] el0_sync_handler+0x8c/0xf0 [ 99.763759][ T5171] el0_sync+0x1b8/0x1c0 [ 99.764118][ T5171] Code: d65f03c0 b9406102 17ffffae 94191565 (d42aa240) [ 99.764715][ T5171] ---[ end trace 1eeffa3e17c58e10 ]--- [ 99.780720][ T5171] Kernel panic - not syncing: BRK handler: Fatal exception Signed-off-by: Jason Zhang <jason.zhang@rock-chips.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20231206013139.20506-1-jason.zhang@rock-chips.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 04 Dec, 2023 9 commits
-
-
Mark Brown authored
Merge series from srinivas.kandagatla@linaro.org: Limit the speaker digital gains to 0dB so that the users will not damage them. Currently there is a limit in UCM, but this does not stop the user form changing the digital gains from command line. So limit this in driver which makes the speakers more safer without active speaker protection in place. Apart from this there is also a range check fix in snd_soc_limit_volume to allow setting this limit correctly. Tested on Lenovo X13s.
-
Srinivas Kandagatla authored
Limit the speaker digital gains to 0dB so that the users will not damage them. Currently there is a limit in UCM, but this does not stop the user form changing the digital gains from command line. So limit this in driver which makes the speakers more safer without active speaker protection in place. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20231204124736.132185-3-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Srinivas Kandagatla authored
Volume can have ranges that start with negative values, ex: -84dB to +40dB. Apply correct range check in snd_soc_limit_volume before setting the platform_max. Without this patch, for example setting a 0dB limit on a volume range of -84dB to +40dB would fail. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20231204124736.132185-2-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Bin Li authored
Lenovo M90 Gen5 is equipped with ALC897, and it needs ALC897_FIXUP_HEADSET_MIC_PIN quirk to make its headset mic work. Signed-off-by: Bin Li <bin.li@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20231204100450.642783-1-bin.li@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Aleksandrs Vinarskis authored
XPS 9530 has 2 tweeters and 2 subwoofers powered by CS35L41 amplifier, SPI connected. For subwoofers to work, it requires both to enable amplifier support, and to enable output to subwoofers via 0x17 quirk (similalry to XPS 9510/9520). Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20231203233006.100558-1-alex.vinarskis@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Sarah Grant authored
These values mirror those of the Pioneer DJM-250MK2 as the channel layout appears identical based on my observations. This duplication could be removed in later contributions if desired. Signed-off-by: Sarah Grant <s@srd.tw> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20231201181654.5058-1-s@srd.twSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Dinghao Liu authored
When wm_adsp_buffer_read() fails, we should free buf->regions. Otherwise, the callers of wm_adsp_buffer_populate() will directly free buf on failure, which makes buf->regions a leaked memory. Fixes: a792af69 ("ASoC: wm_adsp: Refactor compress stream initialisation") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231204074158.12026-1-dinghao.liu@zju.edu.cnSigned-off-by: Mark Brown <broonie@kernel.org>
-
David Rau authored
Change the default MIC detection impedance threshold to 200ohm to support low mic DC impedance headset. Signed-off-by: David Rau <David.Rau.opensource@dm.renesas.com> Link: https://lore.kernel.org/r/20231201042933.26392-1-David.Rau.opensource@dm.renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Marian Postevca authored
This commit adds support for Huawei MateBook D16 2021 with Ryzen 4600H in driver acp3x-es83xx. Signed-off-by: Marian Postevca <posteuca@mutex.one> Link: https://lore.kernel.org/r/20231202223001.8025-1-posteuca@mutex.oneSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 03 Dec, 2023 1 commit
-
-
Pascal Noël authored
The ASUS UM3504DA uses a Realtek HDA codec and two CS35L41 amplifiers via I2C. Apply existing quirk to model. Signed-off-by: Pascal Noël <pascal@pascalcompiles.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20231202013744.12369-1-pascal@pascalcompiles.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 01 Dec, 2023 6 commits
-
-
Peter Ujfalusi authored
Move the base_cfg to struct sof_ipc4_gain_data. This struct describes the message payload passed to the firmware via the mailbox. It is not wise to be 'clever' and try to use the first part of a struct as IPC message without marking the message section as packed and aligned. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20231129131411.27516-3-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Peter Ujfalusi authored
Separate the IPC message part as struct sof_ipc4_src_data. This struct describes the message payload passed to the firmware via the mailbox. It is not wise to be 'clever' and try to use the first part of a struct as IPC message without marking the message section as packed and aligned. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20231129131411.27516-2-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Peter Ujfalusi authored
The current driver is registering the same dais for each hdev found in the system which results duplicated widgets to be registered and the kernel log contains similar prints: snd_hda_codec_realtek ehdaudio0D0: ASoC: sink widget AIF1TX overwritten snd_hda_codec_realtek ehdaudio0D0: ASoC: source widget AIF1RX overwritten skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi3 overwritten skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi2 overwritten skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi1 overwritten skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Codec Output Pin1 overwritten skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Codec Input Pin1 overwritten skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Analog Codec Playback overwritten skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Digital Codec Playback overwritten skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Alt Analog Codec Playback overwritten skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Analog Codec Capture overwritten skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Digital Codec Capture overwritten skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Alt Analog Codec Capture overwritten To avoid such issue, split the dai array into HDMI and non HDMI array and register them conditionally: for HDMI hdev only register the dais needed for HDMI for non HDMI hdev do not register the HDMI dais. Depends-on: 3d1dc8b1 ("ASoC: Intel: skl_hda_dsp_generic: Drop HDMI routes when HDMI is not available") Link: https://github.com/thesofproject/linux/issues/4509Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20231128123914.3986-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Neil Armstrong authored
The -1 value for active_decimator[dai_id] is considered as "not set", but at probe the table is initialized a 0, this prevents enabling the DEC0 Mixer since it will be considered as already set. Initialize the table entries as -1 to fix tx_macro_tx_mixer_put(). Fixes: 1c6a7f52 ("ASoC: codecs: tx-macro: fix active_decimator array") Fixes: c1057a08 ("ASoC: codecs: tx-macro: fix kcontrol put") Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231116-topic-sm8x50-upstream-tx-macro-fix-active-decimator-set-v1-1-6edf402f4b6f@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Malcolm Hart authored
This patch adds ASUSTeK COMPUTER INC "E1504FA" to the quirks file acp6x-mach.c to enable microphone array on ASUS Vivobook GO 15. I have this laptop and can confirm that the patch succeeds in enabling the microphone array. Signed-off-by: Malcolm Hart <malcolm@5harts.com> Cc: stable@vger.kernel.org Rule: add Link: https://lore.kernel.org/stable/875y1nt1bx.fsf%405harts.com Link: https://lore.kernel.org/r/871qcbszh0.fsf@5harts.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Jeremy Soller authored
Add pang13 quirk to enable the internal microphone. Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Link: https://lore.kernel.org/r/20231127184237.32077-2-tcrawford@system76.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 30 Nov, 2023 1 commit
-
-
Takashi Iwai authored
It's been reported that the runtime PM on KONTRON SinglePC (PCI SSID 1734:1232) caused a stall of playback after a bunch of invocations. (FWIW, this looks like an timing issue, and the stall happens rather on the controller side.) As a workaround, disable the default power-save on this platform. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20231130151321.9813-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 29 Nov, 2023 1 commit
-
-
Kailang Yang authored
ChromeOS want to support ALC257. Add codec ID to some relation function. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/99a88a7dbdb045fd9d934abeb6cec15f@realtek.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-