- 09 Dec, 2015 40 commits
-
-
Bjørn Mork authored
commit 638148e2 upstream. Thomas reports " 4gsystems sells two total different LTE-surfsticks under the same name. .. The newer version of XS Stick W100 is from "omega" .. Under windows the driver switches to the same ID, and uses MI03\6 for network and MI01\6 for modem. .. echo "1c9e 9b01" > /sys/bus/usb/drivers/qmi_wwan/new_id echo "1c9e 9b01" > /sys/bus/usb-serial/drivers/option1/new_id T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9b01 Rev=02.32 S: Manufacturer=USB Modem S: Product=USB Modem S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Now all important things are there: wwp0s29f7u2i3 (net), ttyUSB2 (at), cdc-wdm0 (qmi), ttyUSB1 (at) There is also ttyUSB0, but it is not usable, at least not for at. The device works well with qmi and ModemManager-NetworkManager. " Reported-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Aleksander Morgado authored
commit e07af133 upstream. Also known as Verizon U620L. The device is modeswitched from 1410:9020 to 1410:9022 by selecting the 4th USB configuration: $ sudo usb_modeswitch –v 0x1410 –p 0x9020 –u 4 This configuration provides a ECM interface as well as TTYs ('Enterprise Mode' according to the U620 Linux integration guide). Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Woodhouse authored
commit 1bcb49e6 upstream. The Honeywell HGI80 is a wireless interface to the evohome connected thermostat. It uses a TI 3410 USB-serial port. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Uwe Kleine-König authored
commit 705e63d2 upstream. There is a bit of a mess in the order of arguments to the ulpi write callback. There is int ulpi_write(struct ulpi *ulpi, u8 addr, u8 val) in drivers/usb/common/ulpi.c; struct usb_phy_io_ops { ... int (*write)(struct usb_phy *x, u32 val, u32 reg); } in include/linux/usb/phy.h. The callback registered by the musb driver has to comply to the latter, but up to now had "offset" first which effectively made the function broken for correct users. So flip the order and while at it also switch to the parameter names of struct usb_phy_io_ops's write. Fixes: ffb865b1 ("usb: musb: add ulpi access operations") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bjørn Mork authored
commit 59536da3 upstream. The DEVICE_HWI type was added under the faulty assumption that Huawei devices based on Qualcomm chipsets and firmware use the static USB interface numbering known from Gobi devices. But this model does not apply to Huawei devices like the HP branded lt4112 (Huawei me906e). Huawei firmwares will dynamically assign interface numbers. Functions are renumbered when the firmware is reconfigured. Fix by changing the DEVICE_HWI type to use a simplified version of Huawei's subclass + protocol scheme: Blacklisting known network interface combinations and assuming the rest are serial. Reported-and-tested-by: Muri Nicanor <muri+libqmi@immerda.ch> Tested-by: Martin Hauke <mardnh@gmx.de> Fixes: e7181d00 ("USB: qcserial: Add support for HP lt4112 LTE/HSPA+ Gobi 4G Modem") Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Petr Štetiar authored
commit 9d5b5ed7 upstream. It seems like this device has same vendor and product IDs as G2K devices, but it has different number of interfaces(4 vs 5) and also different interface layout which makes it currently unusable: usbcore: registered new interface driver qcserial usbserial: USB Serial support registered for Qualcomm USB modem usb 2-1.2: unknown number of interfaces: 5 lsusb output: Bus 002 Device 003: ID 05c6:9215 Qualcomm, Inc. Acer Gobi 2000 Wireless Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x05c6 Qualcomm, Inc. idProduct 0x9215 Acer Gobi 2000 Wireless Modem bcdDevice 2.32 iManufacturer 1 Quectel iProduct 2 Quectel LTE Module iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 209 bNumInterfaces 5 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 500mA Signed-off-by: Petr Štetiar <ynezz@true.cz> [johan: rename define and add comment ] Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jiri Slaby authored
commit 19cd80a2 upstream. It is not permitted to set task state before lock. usblp_wwait sets the state to TASK_INTERRUPTIBLE and calls mutex_lock_interruptible. Upon return from that function, the state will be TASK_RUNNING again. This is clearly a bug and a warning is generated with LOCKDEP too: WARNING: CPU: 1 PID: 5109 at kernel/sched/core.c:7404 __might_sleep+0x7d/0x90() do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffffa0c588d0>] usblp_wwait+0xa0/0x310 [usblp] Modules linked in: ... CPU: 1 PID: 5109 Comm: captmon Tainted: G W 4.2.5-0.gef2823b-default #1 Hardware name: LENOVO 23252SG/23252SG, BIOS G2ET33WW (1.13 ) 07/24/2012 ffffffff81a4edce ffff880236ec7ba8 ffffffff81716651 0000000000000000 ffff880236ec7bf8 ffff880236ec7be8 ffffffff8106e146 0000000000000282 ffffffff81a50119 000000000000028b 0000000000000000 ffff8802dab7c508 Call Trace: ... [<ffffffff8106e1c6>] warn_slowpath_fmt+0x46/0x50 [<ffffffff8109a8bd>] __might_sleep+0x7d/0x90 [<ffffffff8171b20f>] mutex_lock_interruptible_nested+0x2f/0x4b0 [<ffffffffa0c588fc>] usblp_wwait+0xcc/0x310 [usblp] [<ffffffffa0c58bb2>] usblp_write+0x72/0x350 [usblp] [<ffffffff8121ed98>] __vfs_write+0x28/0xf0 ... Commit 7f477358 (usblp: Implement the ENOSPC convention) moved the set prior locking. So move it back after the lock. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Fixes: 7f477358 ("usblp: Implement the ENOSPC convention") Acked-By: Pete Zaitcev <zaitcev@yahoo.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jonas Gorski authored
commit db1319e1 upstream. Commit d445913c ("usb: ehci-orion: add optional PHY support") added support for optional phys, but devm_phy_optional_get returns -ENOSYS if GENERIC_PHY is not enabled. This causes probe failures, even when there are no phys specified: [ 1.443365] orion-ehci f1058000.usb: init f1058000.usb fail, -38 [ 1.449403] orion-ehci: probe of f1058000.usb failed with error -38 Similar to dwc3, treat -ENOSYS as no phy. Fixes: d445913c ("usb: ehci-orion: add optional PHY support") Signed-off-by: Jonas Gorski <jogo@openwrt.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jurgen Kramer authored
commit 16771c7c upstream. This patch adds native DSD support for the Aune X1S 32BIT/384 DSD DAC Signed-off-by: Jurgen Kramer <gtmkramer@xs4all.nl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Chen authored
commit ae3e57ae upstream. Some i.mx platforms need three clocks to let controller work, but others only need one, refine clock operation to adapt for all platforms, it fixes a regression found at i.mx27. Signed-off-by: Peter Chen <peter.chen@freescale.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
John Youn authored
commit bb7f3d6d upstream. Add platform data and set usb3_lpm_capable and has_lpm_erratum. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
John Youn authored
commit 690fb371 upstream. This patch allows the dwc3 driver to run on the new Synopsys USB 3.1 IP core, albeit in USB 3.0 mode only. The Synopsys USB 3.1 IP (DWC_usb31) retains mostly the same register interface and programming model as the existing USB 3.0 controller IP (DWC_usb3). However the GSNPSID and version numbers are different. Add checking for the new ID to pass driver probe. Also, since the DWC_usb31 version number is lower in value than the full GSNPSID of the DWC_usb3 IP, we set the high bit to identify DWC_usb31 and to ensure the values are higher. Finally, add a documentation note about the revision numbering scheme. Any future revision checks (for STARS, workarounds, and new features) should take into consideration how it applies to both the 3.1/3.0 IP. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
John Youn authored
commit e8095a25 upstream. This adds the PCI product ID for the Synopsys USB 3.1 IP core (DWC_usb31) on a HAPS-based PCI development platform. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
John Youn authored
commit 41adc59c upstream. This ID is for the Synopsys DWC_usb3 core with AXI interface on PCIe HAPS platform. This core has the debug registers mapped at a separate BAR in order to support enhanced hibernation. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Li Jun authored
commit 85da852d upstream. This patch is to support load and unload gadget driver in full OTG mode. Signed-off-by: Li Jun <jun.li@freescale.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Tested-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ben McCauley authored
commit b9e51b2b upstream. In some SoCs, dwc3 is implemented as a USB2.0 only core, meaning that it can't ever achieve SuperSpeed. Currect driver always sets gadget.max_speed to USB_SPEED_SUPER unconditionally. This can causes issues to some Host stacks where the host will issue a GetBOS() request and we will reply with a BOS containing Superspeed Capability Descriptor. At least Windows seems to be upset by this fact and prints a warning that we should connect $this device to another port. [ balbi@ti.com : rewrote entire commit, including source code comment to make a lot clearer what the problem is ] Signed-off-by: Ben McCauley <ben.mccauley@garmin.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Douglas Gilbert authored
commit d134c48d upstream. Following changes that appeared in lk 4.0.0, the gadget udc driver for some ARM based Atmel SoCs (e.g. at91sam9x5 and sama5d3 families) incorrectly deduced full-speed USB link speed even when the hardware had negotiated a high-speed link. The fix is to make sure that the UDPHS Interrupt Enable Register value does not mask the SPEED bit in the Interrupt Status Register. For a mass storage gadget this problem lead to failures when the host had a USB 3 port with the xhci_hcd driver. If the host was a USB 2 port using the ehci_hcd driver then the mass storage gadget worked (but probably at a lower speed than it should have). Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: 9870d895 ("usb: atmel_usba_udc: Mask status with enabled irqs") Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ville Syrjälä authored
commit d115d705 upstream. This reverts commit 8f2c9544. As it breaks g_ether on my Baytrail FFRD8 device. Everything starts out fine, but after a bit of data has been transferred it just stops flowing. Note that I do get a bunch of these "NOHZ: local_softirq_pending 08" when booting the machine, but I'm not really sure if they're related to this problem. Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Hildenbrand authored
commit b85de33a upstream. Commit 383d0b05 ("KVM: s390: handle pending local interrupts via bitmap") introduced a possible memory overwrite from user space. User space could pass an invalid emergency signal code (sending VCPU) and therefore exceed the bitmap. Let's take care of this case and check that the id is in the valid range. Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Hildenbrand authored
commit 152e9f65 upstream. For now, VCPUs were always created sequentially with incrementing VCPU ids. Therefore, the index in the VCPUs array matched the id. As sequential creation might change with cpu hotplug, let's use the correct lookup function to find a VCPU by id, not array index. Let's also use kvm_lookup_vcpu() for validation of the sending VCPU on external call injection. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Hildenbrand authored
commit db27a7a3 upstream. Let's provide a function to lookup a VCPU by id. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> [split patch from refactoring patch] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Hildenbrand authored
commit c5c2c393 upstream. We seemed to have missed a few corner cases in commit f6c137ff ("KVM: s390: randomize sca address"). The SCA has a maximum size of 2112 bytes. By setting the sca_offset to some unlucky numbers, we exceed the page. 0x7c0 (1984) -> Fits exactly 0x7d0 (2000) -> 16 bytes out 0x7e0 (2016) -> 32 bytes out 0x7f0 (2032) -> 48 bytes out One VCPU entry is 32 bytes long. For the last two cases, we actually write data to the other page. 1. The address of the VCPU. 2. Injection/delivery/clearing of SIGP externall calls via SIGP IF. Especially the 2. happens regularly. So this could produce two problems: 1. The guest losing/getting external calls. 2. Random memory overwrites in the host. So this problem happens on every 127 + 128 created VM with 64 VCPUs. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rajkumar Manoharan authored
commit f680f70a upstream. The number of spatial streams that are derived from chain mask for 4x4 devices is using wrong bitmask and conditional check. This is affecting downlink throughput for QCA99x0 devices. Earlier cfg_tx_chainmask is not filled by default until user configured it and so get_nss_from_chainmask never be called. This issue is exposed by recent commit 166de3f1 ("ath10k: remove supported chain mask"). By default maximum supported chain mask is filled in cfg_tx_chainmask. Fixes: 5572a95b ("ath10k: apply chainmask settings to vdev on creation") Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mark Rutland authored
commit cb083816 upstream. A kernel built with DEBUG_RO_DATA && !CONFIG_DEBUG_ALIGN_RODATA doesn't have .text aligned to a page boundary, though fixup_executable works at page-granularity thanks to its use of create_mapping. If .text is not page-aligned, the first page it exists in may be marked non-executable, leading to failures when an attempt is made to execute code in said page. This patch upgrades ALIGN_DEBUG_RO and ALIGN_DEBUG_RO_MIN to force page alignment for DEBUG_RO_DATA && !CONFIG_DEBUG_ALIGN_RODATA kernels, ensuring that all sections with specific RWX permission requirements are mapped with the correct permissions. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reported-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Laura Abbott <laura@labbott.name> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Suzuki Poulose <suzuki.poulose@arm.com> Cc: Will Deacon <will.deacon@arm.com> Fixes: da141706 ("arm64: add better page protections to arm64") Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Robin Murphy authored
commit 5accd17d upstream. For reasons not entirely apparent, but now enshrined in history, the architectural mapping of AArch32 banked registers to AArch64 registers actually orders SP_<mode> and LR_<mode> backwards compared to the intuitive r13/r14 order, for all modes except FIQ. Fix the compat_<reg>_<mode> macros accordingly, in the hope of avoiding subtle bugs with KVM and AArch32 guests. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mirza Krak authored
commit 7cecd9ab upstream. According to SJA1000 data sheet error-warning (EI) interrupt is not cleared by setting the controller in to reset-mode. Then if we have the following case: - system is suspended (echo mem > /sys/power/state) and SJA1000 is left in operating state - A bus error condition occurs which activates EI interrupt, system is still suspended which means EI interrupt will be not be handled nor cleared. If the above two events occur, on resume there is no way to return the SJA1000 to operating state, except to cycle power to it. By simply reading the IR register on start we will clear any previous conditions that could be present. Signed-off-by: Mirza Krak <mirza.krak@hostmobility.com> Reported-by: Christian Magnusson <Christian.Magnusson@semcon.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marek Vasut authored
commit 562b103a upstream. The sizeof() is invoked on an incorrect variable, likely due to some copy-paste error, and this might result in memory corruption. Fix this. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: netdev@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hedberg authored
commit a6ad2a6b upstream. The commit 89cbb063 introduced support for deferred connection parameter removal when unpairing by removing them only once an existing connection gets disconnected. However, it failed to address the scenario when we're *not* connected and do an unpair operation. What makes things worse is that most user space BlueZ versions will first issue a disconnect request and only then unpair, meaning the buggy code will be triggered every time. This effectively causes the kernel to resume scanning and reconnect to a device for which we've removed all keys and GATT database information. This patch fixes the issue by adding the missing call to the hci_conn_params_del() function to a branch which handles the case of no existing connection. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dmitry Tunin authored
commit 18e0afab upstream. T: Bus=04 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=817b Rev=00.02 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb BugLink: https://bugs.launchpad.net/bugs/1506615Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dmitry Tunin authored
commit cd355ff0 upstream. This adapter works with the existing linux-firmware. T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0930 ProdID=021c Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb BugLink: https://bugs.launchpad.net/bugs/1502781Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Herrmann authored
commit 660f0fc0 upstream. The HIDP specs define an idle-timeout which automatically disconnects a device. This has always been implemented in the HIDP layer and forced a synchronous shutdown of the hidp-scheduler. This works just fine, but lacks a forced disconnect on the underlying l2cap channels. This has been broken since: commit 5205185d Author: David Herrmann <dh.herrmann@gmail.com> Date: Sat Apr 6 20:28:47 2013 +0200 Bluetooth: hidp: remove old session-management The old session-management always forced an l2cap error on the ctrl/intr channels when shutting down. The new session-management skips this, as we don't want to enforce channel policy on the caller. In other words, if user-space removes an HIDP device, the underlying channels (which are *owned* and *referenced* by user-space) are still left active. User-space needs to call shutdown(2) or close(2) to release them. Unfortunately, this does not work with idle-timeouts. There is no way to signal user-space that the HIDP layer has been stopped. The API simply does not support any event-passing except for poll(2). Hence, we restore old behavior and force EUNATCH on the sockets if the HIDP layer is disconnected due to idle-timeouts (behavior of explicit disconnects remains unmodified). User-space can still call getsockopt(..., SO_ERROR, ...) ..to retrieve the EUNATCH error and clear sk_err. Hence, the channels can still be re-used (which nobody does so far, though). Therefore, the API still supports the new behavior, but with this patch it's also compatible to the old implicit channel shutdown. Reported-by: Mark Haun <haunma@keteu.org> Reported-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Larry Finger authored
commit 1e6e6328 upstream. This adds the USB ID for the Sitecom WLA2100. The Windows 10 inf file was checked to verify that the addition is correct. Reported-by: Frans van de Wiel <fvdw@fvdw.eu> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Frans van de Wiel <fvdw@fvdw.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
commit 1f9c6e1b upstream. There were several bugs here. 1) The done label was in the wrong place so we didn't copy any information out when there was no command given. 2) We were using PAGE_SIZE as the size of the buffer instead of "PAGE_SIZE - pos". 3) snprintf() returns the number of characters that would have been printed if there were enough space. If there was not enough space (and we had fixed the memory corruption bug #2) then it would result in an information leak when we do simple_read_from_buffer(). I've changed it to use scnprintf() instead. I also removed the initialization at the start of the function, because I thought it made the code a little more clear. Fixes: 5e6e3a92 ('wireless: mwifiex: initial commit for Marvell mwifiex driver') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tony Lindgren authored
commit 75c08f17 upstream. Commit 68bab866 ("mfd: twl6040: Optional clk32k clock handling") added clock handling for the 32k clock from palmas-clk. However, that patch did not consider a typical situation where twl6040 is built-in, and palmas-clk is a loadable module like we have in omap2plus_defconfig. If palmas-clk is not loaded before twl6040 probes, we will get a "clk32k is not handled" warning during booting. This means that any drivers relying on this clock will mysteriously fail, including omap5-uevm WLAN and audio. Note that for WLAN, we probably should also eventually get the clk32kgaudio for MMC3 directly as that's shared between audio and WLAN SDIO at least for omap5-uevm. It seems the WLAN chip cannot get it as otherwise MMC3 won't get properly probed. Fixes: 68bab866 ("mfd: twl6040: Optional clk32k clock handling") Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Linus Walleij authored
commit 7bdccef3 upstream. A static code checker found a memory leak in the Versatile ICST code. Fix it. Fixes: a183da63 "clk: versatile: respect parent rate in ICST clock" Reported-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ingo Molnar authored
commit b2f73922 upstream. So the /proc/PID/stat 'wchan' field (the 30th field, which contains the absolute kernel address of the kernel function a task is blocked in) leaks absolute kernel addresses to unprivileged user-space: seq_put_decimal_ull(m, ' ', wchan); The absolute address might also leak via /proc/PID/wchan as well, if KALLSYMS is turned off or if the symbol lookup fails for some reason: static int proc_pid_wchan(struct seq_file *m, struct pid_namespace *ns, struct pid *pid, struct task_struct *task) { unsigned long wchan; char symname[KSYM_NAME_LEN]; wchan = get_wchan(task); if (lookup_symbol_name(wchan, symname) < 0) { if (!ptrace_may_access(task, PTRACE_MODE_READ)) return 0; seq_printf(m, "%lu", wchan); } else { seq_printf(m, "%s", symname); } return 0; } This isn't ideal, because for example it trivially leaks the KASLR offset to any local attacker: fomalhaut:~> printf "%016lx\n" $(cat /proc/$$/stat | cut -d' ' -f35) ffffffff8123b380 Most real-life uses of wchan are symbolic: ps -eo pid:10,tid:10,wchan:30,comm and procps uses /proc/PID/wchan, not the absolute address in /proc/PID/stat: triton:~/tip> strace -f ps -eo pid:10,tid:10,wchan:30,comm 2>&1 | grep wchan | tail -1 open("/proc/30833/wchan", O_RDONLY) = 6 There's one compatibility quirk here: procps relies on whether the absolute value is non-zero - and we can provide that functionality by outputing "0" or "1" depending on whether the task is blocked (whether there's a wchan address). These days there appears to be very little legitimate reason user-space would be interested in the absolute address. The absolute address is mostly historic: from the days when we didn't have kallsyms and user-space procps had to do the decoding itself via the System.map. So this patch sets all numeric output to "0" or "1" and keeps only symbolic output, in /proc/PID/wchan. ( The absolute sleep address can generally still be profiled via perf, by tasks with sufficient privileges. ) Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Kostya Serebryany <kcc@google.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: kasan-dev <kasan-dev@googlegroups.com> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/20150930135917.GA3285@gmail.comSigned-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Maxime Ripard authored
commit 2502d0ef upstream. The CPU_MAP register is duplicated for each CPUs at different addresses, each instance being at a different address. However, the code so far was using CONFIG_NR_CPUS to initialise the CPU_MAP registers for each registers, while the SoCs embed at most 4 CPUs. This is especially an issue with multi_v7_defconfig, where CONFIG_NR_CPUS is currently set to 16, resulting in writes to registers that are not CPU_MAP. Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Oren Givon authored
commit 4ab75944 upstream. Add some new PCI IDs for the 8260 series which were missing. The following sub-system IDs were added: 0x0130, 0x1130, 0x0132, 0x1132, 0x1150, 0x8110, 0x9110, 0x8130, 0x9130, 0x8132, 0x9132, 0x8150, 0x9150, 0x0044, 0x0930 Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Emmanuel Grumbach authored
commit 03a19cbb upstream. The hardware bug in the commit mentioned below forces us not to re-enable the clock gating in the Host Cluster. The impact on the power consumption is minimal and it allows the WAKE_ME interrupt to propagate. Fixes: c9fdec9f ("iwlwifi: pcie: fix prepare card flow") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christophe Ricard authored
commit e65917b6 upstream. When receiving data in nci_hci_msg_rx_work, extract pipe value using NCI_HCP_MSG_GET_PIPE macro. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-