Skip to content

L
linux
Switch branch/tag
  1. 27 Jun, 2017 2 commits
  3. 08 Jun, 2017 17 commits
  5. 07 Jun, 2017 5 commits
  7. 01 Jun, 2017 5 commits
  9. 30 May, 2017 2 commits
  11. 26 May, 2017 3 commits
    • Jan H. Schönherr's avatar
      KVM: x86: Fix virtual wire mode · 52b54190
      Jan H. Schönherr authored 
      Intel SDM says, that at most one LAPIC should be configured with ExtINT
delivery. KVM configures all LAPICs this way. This causes pic_unlock()
to kick the first available vCPU from the internal KVM data structures.
If this vCPU is not the BSP, but some not-yet-booted AP, the BSP may
never realize that there is an interrupt.

Fix that by enabling ExtINT delivery only for the BSP.

This allows booting a Linux guest without a TSC in the above situation.
Otherwise the BSP gets stuck in calibrate_delay_converge().
Signed-off-by: default avatarJan H. Schönherr <jschoenh@amazon.de>
Reviewed-by: default avatarWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      52b54190
    • Jan H. Schönherr's avatar
      KVM: nVMX: Fix handling of lmsw instruction · e1d39b17
      Jan H. Schönherr authored 
      The decision whether or not to exit from L2 to L1 on an lmsw instruction is
based on bogus values: instead of using the information encoded within the
exit qualification, it uses the data also used for the mov-to-cr
instruction, which boils down to using whatever is in %eax at that point.

Use the correct values instead.

Without this fix, an L1 may not get notified when a 32-bit Linux L2
switches its secondary CPUs to protected mode; the L1 is only notified on
the next modification of CR0. This short time window poses a problem, when
there is some other reason to exit to L1 in between. Then, L2 will be
resumed in real mode and chaos ensues.
Signed-off-by: default avatarJan H. Schönherr <jschoenh@amazon.de>
Reviewed-by: default avatarWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      e1d39b17
    • Wanpeng Li's avatar
      KVM: X86: Fix preempt the preemption timer cancel · 5acc1ca4
      Wanpeng Li authored 
      Preemption can occur during cancel preemption timer, and there will be
inconsistent status in lapic, vmx and vmcs field.

          CPU0                    CPU1

  preemption timer vmexit
  handle_preemption_timer(vCPU0)
    kvm_lapic_expired_hv_timer
      vmx_cancel_hv_timer
        vmx->hv_deadline_tsc = -1
        vmcs_clear_bits
        /* hv_timer_in_use still true */
  sched_out
                           sched_in
                           kvm_arch_vcpu_load
                             vmx_set_hv_timer
                               write vmx->hv_deadline_tsc
                               vmcs_set_bits
                           /* back in kvm_lapic_expired_hv_timer */
                           hv_timer_in_use = false
                           ...
                           vmx_vcpu_run
                             vmx_arm_hv_run
                               write preemption timer deadline
                             spurious preemption timer vmexit
                               handle_preemption_timer(vCPU0)
                                 kvm_lapic_expired_hv_timer
                                   WARN_ON(!apic->lapic_timer.hv_timer_in_use);

This can be reproduced sporadically during boot of L2 on a
preemptible L1, causing a splat on L1.

 WARNING: CPU: 3 PID: 1952 at arch/x86/kvm/lapic.c:1529 kvm_lapic_expired_hv_timer+0xb5/0xd0 [kvm]
 CPU: 3 PID: 1952 Comm: qemu-system-x86 Not tainted 4.12.0-rc1+ #24 RIP: 0010:kvm_lapic_expired_hv_timer+0xb5/0xd0 [kvm]
  Call Trace:
  handle_preemption_timer+0xe/0x20 [kvm_intel]
  vmx_handle_exit+0xc9/0x15f0 [kvm_intel]
  ? lock_acquire+0xdb/0x250
  ? lock_acquire+0xdb/0x250
  ? kvm_arch_vcpu_ioctl_run+0xdf3/0x1ce0 [kvm]
  kvm_arch_vcpu_ioctl_run+0xe55/0x1ce0 [kvm]
  kvm_vcpu_ioctl+0x384/0x7b0 [kvm]
  ? kvm_vcpu_ioctl+0x384/0x7b0 [kvm]
  ? __fget+0xf3/0x210
  do_vfs_ioctl+0xa4/0x700
  ? __fget+0x114/0x210
  SyS_ioctl+0x79/0x90
  do_syscall_64+0x8f/0x750
  ? trace_hardirqs_on_thunk+0x1a/0x1c
  entry_SYSCALL64_slow_path+0x25/0x25

This patch fixes it by disabling preemption while cancelling
preemption timer.  This way cancel_hv_timer is atomic with
respect to kvm_arch_vcpu_load.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: default avatarWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      5acc1ca4
  13. 22 May, 2017 2 commits
    • Linus Torvalds's avatar
      Linux 4.12-rc2 · 08332893
      Linus Torvalds authored
      08332893
    • Linus Torvalds's avatar
      x86: fix 32-bit case of __get_user_asm_u64() · 33c9e972
      Linus Torvalds authored 
      The code to fetch a 64-bit value from user space was entirely buggered,
and has been since the code was merged in early 2016 in commit
b2f68038 ("x86/mm/32: Add support for 64-bit __get_user() on 32-bit
kernels").

Happily the buggered routine is almost certainly entirely unused, since
the normal way to access user space memory is just with the non-inlined
"get_user()", and the inlined version didn't even historically exist.

The normal "get_user()" case is handled by external hand-written asm in
arch/x86/lib/getuser.S that doesn't have either of these issues.

There were two independent bugs in __get_user_asm_u64():

 - it still did the STAC/CLAC user space access marking, even though
   that is now done by the wrapper macros, see commit 11f1a4b9
   ("x86: reorganize SMAP handling in user space accesses").

   This didn't result in a semantic error, it just means that the
   inlined optimized version was hugely less efficient than the
   allegedly slower standard version, since the CLAC/STAC overhead is
   quite high on modern Intel CPU's.

 - the double register %eax/%edx was marked as an output, but the %eax
   part of it was touched early in the asm, and could thus clobber other
   inputs to the asm that gcc didn't expect it to touch.

   In particular, that meant that the generated code could look like
   this:

        mov    (%eax),%eax
        mov    0x4(%eax),%edx

   where the load of %edx obviously was _supposed_ to be from the 32-bit
   word that followed the source of %eax, but because %eax was
   overwritten by the first instruction, the source of %edx was
   basically random garbage.

The fixes are trivial: remove the extraneous STAC/CLAC entries, and mark
the 64-bit output as early-clobber to let gcc know that no inputs should
alias with the output register.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@kernel.org   # v4.8+
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      33c9e972
  15. 21 May, 2017 4 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7