- 21 Aug, 2014 26 commits
-
-
Mauro Carvalho Chehab authored
Now that xc5000_set_params() is also called during resume, move the code that checks for the firmware to happen there. This way, the firmware will be loaded either for analog or digital TV when .resume callback is called. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Mauro Carvalho Chehab authored
When DVB is streaming and suspend is called, it will call au0828_stop_transport(), with will clean the streaming flag. Due to that, stop_urb_transfer() will be called twice, causing an oops. So, we need another flag to be used at resume, telling it to restart DVB. While here, add a logic at stop_urb_transfer() to prevent it of being called twice, and convert the usb_streaming flag into boolean. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Mauro Carvalho Chehab authored
dev->dvb is always not null, as it is an area at the dev memory. So, checking if (dev->dvb) is always true. Instead of this stupid check, what the code wants to do is to know if the DVB was successully registered. Fix it by checking, instead, for dvb->frontend. It should also be sure that this var will be NULL if the device was not properly initialized. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Mauro Carvalho Chehab authored
xc5000_set_params() is a bad name for a function that handles only digital TV. Rename it to xc5000_set_digital_params(), and proper name the generic function that works for both digital and analog. No functional changes. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Mauro Carvalho Chehab authored
If a device suspends/hibertates with a station tuned, restore the tuner station at resume. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Mauro Carvalho Chehab authored
As we need a function that reapply the last tuned radio, in order to do resume, split the code that validates and updates the internal priv struct from the ones that actually set radio and TV. A latter patch will add support for resume. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Mauro Carvalho Chehab authored
As we'll be adding a code to resume tuner operation, we need to move the code that actually sets DTV on a separate function, to be called by the resume code. No functional changes, just code got moved. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Mauro Carvalho Chehab authored
After xc5000 stops working, it waits for 5 seconds, waiting for a new usage. Only after that it goes to low power mode. If a suspend event happens before that, a work queue will remain active, with causes suspend to crash. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Mauro Carvalho Chehab authored
While several tuners have some sort of suspend/resume implementation, this is currently mangled with an optional .sleep callback that it is also used to put the device on low power mode. Not all drivers implement it, as returning the driver from low power may require to re-load the firmware, with takes some time. Also, some drivers may delay it. So, the more coherent is to add two new optional callbacks that will let the tuners to directy implement suspend and resume callbacks if they need. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Mauro Carvalho Chehab authored
Suspend/resume conditions can be very tricky. Add some info printk's to help tracking what's happening there. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Mauro Carvalho Chehab authored
Instead of using printk(KERN_foo, use pr_foo() macros. No functional changes. Note: we should do the same for dprintk(), but that would require to remove the dprintk levels. So, for now, let's not touch on it. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Mauro Carvalho Chehab authored
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Mauro Carvalho Chehab authored
No timers should be enabled during suspend. So, stop them. At resume time, we should do the proper initialization for it to keep working. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Mauro Carvalho Chehab authored
The STREAM_ON state is used by s_format callback, but the driver never sets it. Fix it. This will also be needed in order to handle suspend/resume ops. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Mauro Carvalho Chehab authored
The scheduled work should be cancelled during suspend. At resume time, we need to set the frontend again. So, add such logic to the driver. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Mauro Carvalho Chehab authored
At resume, we should restore the register contents. So, reenable the bridge and GPIO settings. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Mauro Carvalho Chehab authored
Trying to make au0828 to suspend can do very bad things, as the polling Kthread is not handled. We should disable it during suspend, only re-enabling it at resume. Still, analog and digital TV won't work, as we don't reinit the settings at resume, but at least it won't hang. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Shuah Khan authored
Remove CONFIG_VIDEO_AU0828_RC scope around au0828_rc_register() and au0828_rc_unregister() calls in au0828-core Signed-off-by: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Shuah Khan authored
Define au0828_rc_*() stubs to avoid compile errors when VIDEO_AU0828_RC is disabled and avoid the need to enclose au0828_rc_*() in ifdef CONFIG_VIDEO_AU0828_RC in .c files. Signed-off-by: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Mauro Carvalho Chehab authored
It doesn't make sense to handle an IR code given before suspending after the device resume. So, turn off IR int while suspending. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Mauro Carvalho Chehab authored
As the RC kthread can re-enable IR int, we should first cancel the kthread and then disable IR int. While here, remove a temporary debug printk. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Mauro Carvalho Chehab authored
When the DVB code sets the frontend, it disables the IR INT, probably due to some hardware bug, as there's no code there at au8522 frontend that writes on register 0xe0. Fixing it at au8522 code is hard, as it doesn't know if the IR is enabled or disabled, and just restoring the value of register 0xe0 could cause other nasty effects. So, better to add a hack at au0828-input polling interval to enable int, if disabled. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Mauro Carvalho Chehab authored
HVR-850 also has a remote. Enable it. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Mauro Carvalho Chehab authored
The IR code increases the power consumption of the device. Allow to disable it via modprobe parameter. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Mauro Carvalho Chehab authored
This sleep was doing some debouncing on the original driver. This is not needed on Linux, because the RC core and the input layer already takes care of it. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Mauro Carvalho Chehab authored
Linux 3.17-rc1
-
- 16 Aug, 2014 14 commits
-
-
Linus Torvalds authored
-
git://cavan.codon.org.uk/platform-drivers-x86Linus Torvalds authored
Pull x86 platform driver updates from Matthew Garrett: "A moderate number of changes, but nothing awfully significant. A lot of const cleanups, some reworking and additions to the rfkill quirks in the asus driver, a new driver for generating falling laptop events on Toshibas and some misc fixes. Maybe vendors have stopped inventing things" * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: (41 commits) platform/x86: Enable build support for toshiba_haps Documentation: Add file about toshiba_haps module platform/x86: Toshiba HDD Active Protection Sensor asus-nb-wmi: Add wapf4 quirk for the U32U alienware-wmi: make hdmi_mux enabled on case-by-case basis ideapad-laptop: Constify DMI table and other r/o variables asus-nb-wmi.c: Rename x401u quirk to wapf4 compal-laptop: correct invalid hwmon name toshiba_acpi: Add Qosmio X75-A to the alt keymap dmi list toshiba_acpi: Add extra check to backlight code Fix log message about future removal of interface ideapad-laptop: Disable touchpad interface on Yoga models asus-nb-wmi: Add wapf4 quirk for the X550CC intel_ips: Make ips_mcp_limits variables static thinkpad_acpi: Mark volume_alsa_control_{vol,mute} as __initdata fujitsu-laptop: Mark fujitsu_dmi_table[] DMI table as __initconst hp-wmi: Add missing __init annotations to initialization code hp_accel: Constify ACPI and DMI tables fujitsu-tablet: Mark DMI callbacks as __init code dell-laptop: Mark dell_quirks[] DMI table as __initconst ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linuxLinus Torvalds authored
Pull idle update from Len Brown: "Two Intel-platform-specific updates to intel_idle, and a cosmetic tweak to the turbostat utility" * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: tweak whitespace in output format intel_idle: Broadwell support intel_idle: Disable Baytrail Core and Module C6 auto-demotion
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linuxLinus Torvalds authored
Pull module fix from Rusty Russell: "Nasty potential bug if someone uses a known module param with an invalid value (we don't fail unknown module params any more, just warn)" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: module: Clean up ro/nx after early module load failures
-
git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtioLinus Torvalds authored
Pull virtio-rng update from Amit Shah: "Add derating factor for use by hwrng core Sending directly to you with the commit log changes Ted Ts'o pointed out. Not sure if Rusty's back after his travel, but this already has his s-o-b" * 'rng-queue' of git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio: virtio: rng: add derating factor for use by hwrng core
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs updates from Chris Mason: "These are all fixes I'd like to get out to a broader audience. The biggest of the bunch is Mark's quota fix, which is also in the SUSE kernel, and makes our subvolume quotas dramatically more accurate. I've been running xfstests with these against your current git overnight, but I'm queueing up longer tests as well" * 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: disable strict file flushes for renames and truncates Btrfs: fix csum tree corruption, duplicate and outdated checksums Btrfs: Fix memory corruption by ulist_add_merge() on 32bit arch Btrfs: fix compressed write corruption on enospc btrfs: correctly handle return from ulist_add btrfs: qgroup: account shared subtrees during snapshot delete Btrfs: read lock extent buffer while walking backrefs Btrfs: __btrfs_mod_ref should always use no_quota btrfs: adjust statfs calculations according to raid profiles
-
git://git.samba.org/jlayton/linuxLinus Torvalds authored
Pull file locking bugfixes from Jeff Layton: "Most of these patches are to fix a long-standing regression that crept in when the BKL was removed from the file-locking code. The code was converted to use a conventional spinlock, but some fl_release_private ops can block and you can end up sleeping inside the lock. There's also a patch to make /proc/locks show delegations as 'DELEG'" * tag 'locks-v3.17-2' of git://git.samba.org/jlayton/linux: locks: update Locking documentation to clarify fl_release_private behavior locks: move locks_free_lock calls in do_fcntl_add_lease outside spinlock locks: defer freeing locks in locks_delete_lock until after i_lock has been dropped locks: don't reuse file_lock in __posix_lock_file locks: don't call locks_release_private from locks_copy_lock locks: show delegations as "DELEG" in /proc/locks
-
git://git.kvack.org/~bcrl/aio-nextLinus Torvalds authored
Pull aio updates from Ben LaHaise. * git://git.kvack.org/~bcrl/aio-next: aio: use iovec array rather than the single one aio: fix some comments aio: use the macro rather than the inline magic number aio: remove the needless registration of ring file's private_data aio: remove no longer needed preempt_disable() aio: kill the misleading rcu read locks in ioctx_add_table() and kill_ioctx() aio: change exit_aio() to load mm->ioctx_table once and avoid rcu_read_lock()
-
Azael Avalos authored
Makefile and Kconfig build support patch for the newly introduced kernel module toshiba_haps. Signed-off-by: Azael Avalos <coproscefalo@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
-
Azael Avalos authored
This patch provides information about the Toshiba HDD Active Protection Sensor driver module toshiba_haps. Signed-off-by: Azael Avalos <coproscefalo@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
-
Azael Avalos authored
This driver adds support for the built-in accelereometer found on recent Toshiba laptops with HID TOS620A. This driver receives ACPI notify events 0x80 when the sensor detects a sudden move or a harsh vibration, as well as an ACPI notify event 0x81 whenever the movement or vibration has been stabilized. Also provides sysfs entries to get/set the desired protection level and reseting the HDD protection interface. Signed-off-by: Azael Avalos <coproscefalo@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
-
Hans de Goede authored
As reported here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1173681 the U32U needs wapf=4 too. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
-
Mario Limonciello authored
Not all HW supporting WMAX method will support the HDMI mux feature. Explicitly quirk the HW that does support it. Signed-off-by: Mario Limonciello <mario_limonciello@dell.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
-
Mathias Krause authored
Constify the rfkill_blacklist[] DMI table, the ideapad_rfk_data[] table and the ideapad_attribute_group attribute group. There's no need to have them writeable during runtime. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Ike Panhc <ike.pan@canonical.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
-