- 04 Jan, 2024 12 commits
-
-
Quentin Schulz authored
This scary message can misled the user into thinking something bad has happened and needs to be fixed, however it could simply be part of a normal boot process where EPROBE_DEFER is taken into account. Therefore, let's use dev_err_probe so that this message doesn't get shown (by default) when the return code is EPROBE_DEFER. Fixes: 34cc0aa2 ("drm/rockchip: Add support for Rockchip Soc LVDS") Cc: Quentin Schulz <foss+kernel@0leil.net> Signed-off-by:
Quentin Schulz <quentin.schulz@theobroma-systems.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20231120-rk-lvds-defer-msg-v2-2-9c59a5779cf9@theobroma-systems.com
-
Quentin Schulz authored
ret variable stores the return value of drm_of_find_panel_or_bridge which can return error codes different from EPROBE_DEFER. Therefore, let's just return that error code instead of forcing it to EPROBE_DEFER. Fixes: 34cc0aa2 ("drm/rockchip: Add support for Rockchip Soc LVDS") Cc: Quentin Schulz <foss+kernel@0leil.net> Signed-off-by:
-
Alex Bee authored
Now that we have proper pixelclock-based mode validation we can drop the custom fill_modes hook. CRTC size validation for the display controller has been added with Commit 8e140cb6 ("drm/rockchip: vop: limit maximum resolution to hardware capabilities") Signed-off-by:
Alex Bee <knaerzche@gmail.com> Reviewed-by:
Maxime Ripard <mripard@kernel.org> Signed-off-by:
-
Alex Bee authored
As per TRM this controller supports pixelclocks starting from 25 MHz. The maximum supported pixelclocks are defined by the phy configurations we have. Also it can't support modes that require doubled clocks. If the variant has a phy reference clock we can additionally validate against VESA DMT'srecommendations. Signed-off-by:
-
Alex Bee authored
This variant requires the phy reference clock to be enabled before the DDC block can work and the (initial) DDC bus frequency is calculated based on the rate of this clock. Besides the only difference is phy configuration required to make the driver working for this variant as well. Signed-off-by:
-
Alex Bee authored
In preparation to support RK3128's integration of the controller, this patch adds a simple variant implementation. They mainly differ in the phy configuration required, so those are part of the match_data. The values have been taken from downstream. The pixelclocks in there are meant to be max-inclusive. Signed-off-by:
-
Lucas Stach authored
The VOP2 driver needs this port ID to properly configure the display data routing. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
-
Zack Rusin authored
Switch to a new plane state requires unreferencing of all held surfaces. In the work required for mob cursors the mapped surfaces started being cached but the variable indicating whether the surface is currently mapped was not being reset. This leads to crashes as the duplicated state, incorrectly, indicates the that surface is mapped even when no surface is present. That's because after unreferencing the surface it's perfectly possible for the plane to be backed by a bo instead of a surface. Reset the surface mapped flag when unreferencing the plane state surface to fix null derefs in cleanup. Fixes crashes in KDE KWin 6.0 on Wayland: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 4 PID: 2533 Comm: kwin_wayland Not tainted 6.7.0-rc3-vmwgfx #2 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 RIP: 0010:vmw_du_cursor_plane_cleanup_fb+0x124/0x140 [vmwgfx] Code: 00 00 00 75 3a 48 83 c4 10 5b 5d c3 cc cc cc cc 48 8b b3 a8 00 00 00 48 c7 c7 99 90 43 c0 e8 93 c5 db ca 48 8b 83 a8 00 00 00 <48> 8b 78 28 e8 e3 f> RSP: 0018:ffffb6b98216fa80 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff969d84cdcb00 RCX: 0000000000000027 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff969e75f21600 RBP: ffff969d4143dc50 R08: 0000000000000000 R09: ffffb6b98216f920 R10: 0000000000000003 R11: ffff969e7feb3b10 R12: 0000000000000000 R13: 0000000000000000 R14: 000000000000027b R15: ffff969d49c9fc00 FS: 00007f1e8f1b4180(0000) GS:ffff969e75f00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000028 CR3: 0000000104006004 CR4: 00000000003706f0 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? vmw_du_cursor_plane_cleanup_fb+0x124/0x140 [vmwgfx] drm_atomic_helper_cleanup_planes+0x9b/0xc0 commit_tail+0xd1/0x130 drm_atomic_helper_commit+0x11a/0x140 drm_atomic_commit+0x97/0xd0 ? __pfx___drm_printfn_info+0x10/0x10 drm_atomic_helper_update_plane+0xf5/0x160 drm_mode_cursor_universal+0x10e/0x270 drm_mode_cursor_common+0x102/0x230 ? __pfx_drm_mode_cursor2_ioctl+0x10/0x10 drm_ioctl_kernel+0xb2/0x110 drm_ioctl+0x26d/0x4b0 ? __pfx_drm_mode_cursor2_ioctl+0x10/0x10 ? __pfx_drm_ioctl+0x10/0x10 vmw_generic_ioctl+0xa4/0x110 [vmwgfx] __x64_sys_ioctl+0x94/0xd0 do_syscall_64+0x61/0xe0 ? __x64_sys_ioctl+0xaf/0xd0 ? syscall_exit_to_user_mode+0x2b/0x40 ? do_syscall_64+0x70/0xe0 ? __x64_sys_ioctl+0xaf/0xd0 ? syscall_exit_to_user_mode+0x2b/0x40 ? do_syscall_64+0x70/0xe0 ? exc_page_fault+0x7f/0x180 entry_SYSCALL_64_after_hwframe+0x6e/0x76 RIP: 0033:0x7f1e93f279ed Code: 04 25 28 00 00 00 48 89 45 c8 31 c0 48 8d 45 10 c7 45 b0 10 00 00 00 48 89 45 b8 48 8d 45 d0 48 89 45 c0 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff f> RSP: 002b:00007ffca0faf600 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 000055db876ed2c0 RCX: 00007f1e93f279ed RDX: 00007ffca0faf6c0 RSI: 00000000c02464bb RDI: 0000000000000015 RBP: 00007ffca0faf650 R08: 000055db87184010 R09: 0000000000000007 R10: 000055db886471a0 R11: 0000000000000246 R12: 00007ffca0faf6c0 R13: 00000000c02464bb R14: 0000000000000015 R15: 00007ffca0faf790 </TASK> Modules linked in: snd_seq_dummy snd_hrtimer nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_ine> CR2: 0000000000000028 ---[ end trace 0000000000000000 ]--- RIP: 0010:vmw_du_cursor_plane_cleanup_fb+0x124/0x140 [vmwgfx] Code: 00 00 00 75 3a 48 83 c4 10 5b 5d c3 cc cc cc cc 48 8b b3 a8 00 00 00 48 c7 c7 99 90 43 c0 e8 93 c5 db ca 48 8b 83 a8 00 00 00 <48> 8b 78 28 e8 e3 f> RSP: 0018:ffffb6b98216fa80 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff969d84cdcb00 RCX: 0000000000000027 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff969e75f21600 RBP: ffff969d4143dc50 R08: 0000000000000000 R09: ffffb6b98216f920 R10: 0000000000000003 R11: ffff969e7feb3b10 R12: 0000000000000000 R13: 0000000000000000 R14: 000000000000027b R15: ffff969d49c9fc00 FS: 00007f1e8f1b4180(0000) GS:ffff969e75f00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000028 CR3: 0000000104006004 CR4: 00000000003706f0 Signed-off-by:
Zack Rusin <zack.rusin@broadcom.com> Fixes: 485d98d4 ("drm/vmwgfx: Add support for CursorMob and CursorBypass 4") Reported-by:
Stefan Hoffmeister <stefan.hoffmeister@econos.de> Closes: https://gitlab.freedesktop.org/drm/misc/-/issues/34 Cc: Martin Krastev <martin.krastev@broadcom.com> Cc: Maaz Mombasawala <maaz.mombasawala@broadcom.com> Cc: Ian Forbes <ian.forbes@broadcom.com> Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.19+ Acked-by:
Javier Martinez Canillas <javierm@redhat.com> Reviewed-by:
Maaz Mombasawala <maaz.mombasawala@broadcom.com> Reviewed-by:
Martin Krastev <martin.krastev@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231224052540.605040-1-zack.rusin@broadcom.com
-
Randy Dunlap authored
Fix a new kernel-doc warning reported by kernel test robot: vmwgfx_surface.c:55: warning: Excess struct member 'base' description in 'vmw_user_surface' The other warning is not correct: it is confused by "__counted_by". Kees has made a separate patch for that. In -Wall mode, kernel-doc still reports 20 warnings of this nature: vmwgfx_surface.c:198: warning: No description found for return value of 'vmw_surface_dma_size' but I am not addressing those. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312150701.kNI9LuM3-lkp@intel.com/ Cc: Kees Cook <keescook@chromium.org> Cc: Zack Rusin <zackr@vmware.com> Cc: VMware Graphics Reviewers <linux-graphics-maintainer@vmware.com> Cc: dri-devel@lists.freedesktop.org Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
-
Zhipeng Lu authored
When ida_alloc_max fails, resources allocated before should be freed, including *res allocated by kmalloc and ttm_resource_init. Fixes: d3bcb4b0 ("drm/vmwgfx: switch the TTM backends to self alloc") Signed-off-by:
Zhipeng Lu <alexious@zju.edu.cn> Signed-off-by:
-
Randy Dunlap authored
kernel test robot reports one kernel-doc warning in stdu, but running scripts/kernel-doc in -Wall mode reports several more, so fix all of them at one time: vmwgfx_stdu.c:76: warning: Excess struct member 'transfer' description in 'vmw_stdu_dirty' vmwgfx_stdu.c:103: warning: missing initial short description on line: * struct vmw_screen_target_display_unit vmwgfx_stdu.c:215: warning: No description found for return value of 'vmw_stdu_bind_st' vmwgfx_stdu.c:320: warning: No description found for return value of 'vmw_stdu_destroy_st' vmwgfx_stdu.c:551: warning: No description found for return value of 'vmw_kms_stdu_readback' vmwgfx_stdu.c:719: warning: No description found for return value of 'vmw_kms_stdu_surface_dirty' vmwgfx_stdu.c:895: warning: No description found for return value of 'vmw_stdu_primary_plane_prepare_fb' vmwgfx_stdu.c:1470: warning: No description found for return value of 'vmw_stdu_init' Signed-off-by:
-
Ghanshyam Agrawal authored
Fix typos in vmwgfx_execbuf.c. Signed-off-by:
Ghanshyam Agrawal <ghanshyam1898@gmail.com> Signed-off-by:
-
- 03 Jan, 2024 1 commit
-
-
Andy Shevchenko authored
While making a spelling mistake myself for `git grep kvalloc` I found that the only file has such a typo. Fix it and update to the standard de facto of how we refer to the functions. Also spell usr-out as user-out, it seems this driver uses its own terminology nobody else can decypher, make it more readable. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231219151955.2477488-1-andriy.shevchenko@linux.intel.com
-
- 02 Jan, 2024 5 commits
-
-
Dario Binacchi authored
The Makefile enables/disables the file compilation depending on CONFIG_DEBUG_FS. Signed-off-by:
Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Harry Wentland authored
When the floor LUT index (drm_fixp2int(lut_index) is the last index of the array the ceil LUT index will point to an entry beyond the array. Make sure we guard against it and use the value of the floor LUT index. v3: - Drop bits from commit description that didn't contribute anything of value Fixes: db1f254f ("drm/vkms: Add support to 1D gamma LUT") Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Cc: Arthur Grillo <arthurgrillo@riseup.net> Reviewed-by:
Arthur Grillo <arthurgrillo@riseup.net> Reviewed-by:
Melissa Wen <mwen@igalia.com> Signed-off-by:
Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108163647.106853-6-harry.wentland@amd.com
-
Harry Wentland authored
This aligns with most other DRM drivers and will allow us to add new VKMS config options without polluting the DRM Kconfig. v3: - Change SPDX to GPL-2.0-only to match DRM KConfig SPDX (Simon) Signed-off-by:
Simon Ser <contact@emersion.fr> Signed-off-by:
-
Harry Wentland authored
Unit testing this in VKMS shows that passing 0 into this function returns -1, which is highly counter- intuitive. Fix it by checking whether the input is >= 0 instead of > 0. Fixes: 64566b5e ("drm: Add drm_fixp_from_fraction and drm_fixp2int_ceil") Signed-off-by:
-
Simon Ser authored
Bubble up any error to the caller. Signed-off-by:
Maíra Canal <mcanal@igalia.com> Signed-off-by:
-
- 01 Jan, 2024 4 commits
-
-
Javier Martinez Canillas authored
The Solomon SSD133x controllers (such as the SSD1331) are used by RGB dot matrix OLED panels, add a modesetting pipeline to support the chip family. The SSD133x controllers support 256 (8-bit) and 65k (16-bit) color depths but only the 256-color mode (DRM_FORMAT_RGB332) is implemented for now. Signed-off-by:
Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231229112026.2797483-5-javierm@redhat.com
-
Javier Martinez Canillas authored
Add a Device Tree binding schema for the OLED panels based on the Solomon SSD133x family of controllers. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231229112026.2797483-4-javierm@redhat.com
-
Javier Martinez Canillas authored
Commit 2d23e7d6 ("dt-bindings: display: Add SSD132x OLED controllers") used the wrong properties for width and height, instead of the correct "solomon,width" and "solomon,height" properties. Fix this by adding the vendor prefix to the width and height properties. Fixes: 2d23e7d6 ("dt-bindings: display: Add SSD132x OLED controllers") Reported-by:
Conor Dooley <conor@kernel.org> Closes: https://lore.kernel.org/dri-devel/20231218-example-envision-b41ca8efa251@spud/Signed-off-by:
-
Javier Martinez Canillas authored
The commit 591825fb ("dt-bindings: display: ssd1307fb: Remove default width and height values") used the wrong properties for width and height, instead of the correct "solomon,width" and "solomon,height" properties. Fix this by adding the vendor prefix to the width and height properties. Fixes: 591825fb ("dt-bindings: display: ssd1307fb: Remove default width and height values") Reported-by:
-
- 29 Dec, 2023 18 commits
-
-
Alex Bee authored
This splits setting the power mode of the controller / phy in two functions. It's done in preparation of setting up the phy based on the pixelclock. No functional changes intended. Signed-off-by:
-
Alex Bee authored
inno_hdmi_reset is only ever called when initializing the controller. At this point it’s completely uneccessary to power up the PHY, since all what has to work at this point is the DDC bus. The phy will be powered up correctly when a mode is set in inno_hdmi_encoder_enable and disabled in inno_hdmi_encoder_disable. Set it to LOWER_PWR after resetting the controller. Signed-off-by:
-
Alex Bee authored
The display controller will always give full range RGB regardless of the mode set, but HDMI requires certain modes to be transmitted in limited range RGB. This is especially required for HDMI sinks which do not support non-standard quantization ranges. This enables color space conversion for those modes and sets the quantization range accordingly in the AVI infoframe. Signed-off-by:
-
Alex Bee authored
The data which is currently hold in hdmi_data should not be part of device itself but of the connector state. Introduce a connector state subclass and move the data from hdmi_data in there. Suggested-by:
-
Alex Bee authored
The inclusion syscon.h isn't used anywhere. Remove it. Signed-off-by:
-
Alex Bee authored
The struct member irq isn't used anywhere. Drop it. Signed-off-by:
-
Maxime Ripard authored
The drm_dev field in the inno_hdmi struct stores a pointer to the DRM device but is never used anywhere in the driver. Let's remove it. Signed-off-by:
-
Maxime Ripard authored
The inno_hdmi driver relies on its own internal infoframe type matching the hardware. This works fine, but in order to make further reworks easier, let's switch to the HDMI spec definition of those types. Signed-off-by:
-
Maxime Ripard authored
The code to upload infoframes to the controller uses a weird construct which, based on the previous function call return code, will either disable or enable that infoframe. In order to get rid of that argument, let's split the function to disable the infoframe into a separate function and make it obvious what we are doing in the error path. Signed-off-by:
-
Maxime Ripard authored
The HDMI vendor infoframe is only meant to be sent with 4k60 modes and higher, but the controller doesn't support them. Let's drop them from the kernel. Suggested-by:
Johan Jonker <jbx6244@gmail.com> Signed-off-by:
-
Maxime Ripard authored
The tmds_rate field in the inno_hdmi structure is used mostly to configure the internal i2c controller divider through a call to the inno_hdmi_i2c_init() function. We can simply make that rate an argument to that function, which also removes a workaround to initialize the divider at probe time when we don't have a mode yet. Signed-off-by:
-
Alex Bee authored
Now that the unneeded support for YUV based input formats is gone, the csc coefficients for those formats can be dropped as well. Signed-off-by:
-
Maxime Ripard authored
The driver has a lot of logic to deal with multiple input formats, but hardcodes it to RGB. This means that most of that code has been dead code, so let's get rid of it. Signed-off-by:
-
Maxime Ripard authored
The sink_has_audio flag is not used anywhere in the driver so let's get rid of it. It's redundant with drm_display_info.has_audio anyway. Signed-off-by:
-
Maxime Ripard authored
The mode's VIC is only ever used in the inno_hdmi_setup() function so there's no need to store it in the main structure. Signed-off-by:
-
Maxime Ripard authored
We're not doing anything special in atomic_mode_set so we can simply merge it into atomic_enable. Signed-off-by:
-
Maxime Ripard authored
The inno_hdmi encoder still uses the !atomic variants of enable, disable and modeset. Convert to their atomic equivalents. Signed-off-by:
-
Maxime Ripard authored
The driver maintains a copy of the adjusted mode but doesn't use it anywhere. Remove it. Signed-off-by:
-
