- 24 Mar, 2022 40 commits
-
-
Linus Torvalds authored
Merge more updates from Andrew Morton: "Various misc subsystems, before getting into the post-linux-next material. 41 patches. Subsystems affected by this patch series: procfs, misc, core-kernel, lib, checkpatch, init, pipe, minix, fat, cgroups, kexec, kdump, taskstats, panic, kcov, resource, and ubsan" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (41 commits) Revert "ubsan, kcsan: Don't combine sanitizer with kcov on clang" kernel/resource: fix kfree() of bootmem memory again kcov: properly handle subsequent mmap calls kcov: split ioctl handling into locked and unlocked parts panic: move panic_print before kmsg dumpers panic: add option to dump all CPUs backtraces in panic_print docs: sysctl/kernel: add missing bit to panic_print taskstats: remove unneeded dead assignment kasan: no need to unset panic_on_warn in end_report() ubsan: no need to unset panic_on_warn in ubsan_epilogue() panic: unset panic_on_warn inside panic() docs: kdump: add scp example to write out the dump file docs: kdump: update description about sysfs file system support arm64: mm: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef x86/setup: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef riscv: mm: init: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef kexec: make crashk_res, crashk_low_res and crash_notes symbols always visible cgroup: use irqsave in cgroup_rstat_flush_locked(). fat: use pointer to simple type in put_user() minix: fix bug when opening a file with O_DIRECT ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds authored
Pull networking updates from Jakub Kicinski: "The sprinkling of SPI drivers is because we added a new one and Mark sent us a SPI driver interface conversion pull request. Core ---- - Introduce XDP multi-buffer support, allowing the use of XDP with jumbo frame MTUs and combination with Rx coalescing offloads (LRO). - Speed up netns dismantling (5x) and lower the memory cost a little. Remove unnecessary per-netns sockets. Scope some lists to a netns. Cut down RCU syncing. Use batch methods. Allow netdev registration to complete out of order. - Support distinguishing timestamp types (ingress vs egress) and maintaining them across packet scrubbing points (e.g. redirect). - Continue the work of annotating packet drop reasons throughout the stack. - Switch netdev error counters from an atomic to dynamically allocated per-CPU counters. - Rework a few preempt_disable(), local_irq_save() and busy waiting sections problematic on PREEMPT_RT. - Extend the ref_tracker to allow catching use-after-free bugs. BPF --- - Introduce "packing allocator" for BPF JIT images. JITed code is marked read only, and used to be allocated at page granularity. Custom allocator allows for more efficient memory use, lower iTLB pressure and prevents identity mapping huge pages from getting split. - Make use of BTF type annotations (e.g. __user, __percpu) to enforce the correct probe read access method, add appropriate helpers. - Convert the BPF preload to use light skeleton and drop the user-mode-driver dependency. - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling its use as a packet generator. - Allow local storage memory to be allocated with GFP_KERNEL if called from a hook allowed to sleep. - Introduce fprobe (multi kprobe) to speed up mass attachment (arch bits to come later). - Add unstable conntrack lookup helpers for BPF by using the BPF kfunc infra. - Allow cgroup BPF progs to return custom errors to user space. - Add support for AF_UNIX iterator batching. - Allow iterator programs to use sleepable helpers. - Support JIT of add, and, or, xor and xchg atomic ops on arm64. - Add BTFGen support to bpftool which allows to use CO-RE in kernels without BTF info. - Large number of libbpf API improvements, cleanups and deprecations. Protocols --------- - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev. - Adjust TSO packet sizes based on min_rtt, allowing very low latency links (data centers) to always send full-sized TSO super-frames. - Make IPv6 flow label changes (AKA hash rethink) more configurable, via sysctl and setsockopt. Distinguish between server and client behavior. - VxLAN support to "collect metadata" devices to terminate only configured VNIs. This is similar to VLAN filtering in the bridge. - Support inserting IPv6 IOAM information to a fraction of frames. - Add protocol attribute to IP addresses to allow identifying where given address comes from (kernel-generated, DHCP etc.) - Support setting socket and IPv6 options via cmsg on ping6 sockets. - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS. Define dscp_t and stop taking ECN bits into account in fib-rules. - Add support for locked bridge ports (for 802.1X). - tun: support NAPI for packets received from batched XDP buffs, doubling the performance in some scenarios. - IPv6 extension header handling in Open vSwitch. - Support IPv6 control message load balancing in bonding, prevent neighbor solicitation and advertisement from using the wrong port. Support NS/NA monitor selection similar to existing ARP monitor. - SMC - improve performance with TCP_CORK and sendfile() - support auto-corking - support TCP_NODELAY - MCTP (Management Component Transport Protocol) - add user space tag control interface - I2C binding driver (as specified by DMTF DSP0237) - Multi-BSSID beacon handling in AP mode for WiFi. - Bluetooth: - handle MSFT Monitor Device Event - add MGMT Adv Monitor Device Found/Lost events - Multi-Path TCP: - add support for the SO_SNDTIMEO socket option - lots of selftest cleanups and improvements - Increase the max PDU size in CAN ISOTP to 64 kB. Driver API ---------- - Add HW counters for SW netdevs, a mechanism for devices which offload packet forwarding to report packet statistics back to software interfaces such as tunnels. - Select the default NIC queue count as a fraction of number of physical CPU cores, instead of hard-coding to 8. - Expose devlink instance locks to drivers. Allow device layer of drivers to use that lock directly instead of creating their own which always runs into ordering issues in devlink callbacks. - Add header/data split indication to guide user space enabling of TCP zero-copy Rx. - Allow configuring completion queue event size. - Refactor page_pool to enable fragmenting after allocation. - Add allocation and page reuse statistics to page_pool. - Improve Multiple Spanning Trees support in the bridge to allow reuse of topologies across VLANs, saving HW resources in switches. - DSA (Distributed Switch Architecture): - replay and offload of host VLAN entries - offload of static and local FDB entries on LAG interfaces - FDB isolation and unicast filtering New hardware / drivers ---------------------- - Ethernet: - LAN937x T1 PHYs - Davicom DM9051 SPI NIC driver - Realtek RTL8367S, RTL8367RB-VB switch and MDIO - Microchip ksz8563 switches - Netronome NFP3800 SmartNICs - Fungible SmartNICs - MediaTek MT8195 switches - WiFi: - mt76: MediaTek mt7916 - mt76: MediaTek mt7921u USB adapters - brcmfmac: Broadcom BCM43454/6 - Mobile: - iosm: Intel M.2 7360 WWAN card Drivers ------- - Convert many drivers to the new phylink API built for split PCS designs but also simplifying other cases. - Intel Ethernet NICs: - add TTY for GNSS module for E810T device - improve AF_XDP performance - GTP-C and GTP-U filter offload - QinQ VLAN support - Mellanox Ethernet NICs (mlx5): - support xdp->data_meta - multi-buffer XDP - offload tc push_eth and pop_eth actions - Netronome Ethernet NICs (nfp): - flow-independent tc action hardware offload (police / meter) - AF_XDP - Other Ethernet NICs: - at803x: fiber and SFP support - xgmac: mdio: preamble suppression and custom MDC frequencies - r8169: enable ASPM L1.2 if system vendor flags it as safe - macb/gem: ZynqMP SGMII - hns3: add TX push mode - dpaa2-eth: software TSO - lan743x: multi-queue, mdio, SGMII, PTP - axienet: NAPI and GRO support - Mellanox Ethernet switches (mlxsw): - source and dest IP address rewrites - RJ45 ports - Marvell Ethernet switches (prestera): - basic routing offload - multi-chain TC ACL offload - NXP embedded Ethernet switches (ocelot & felix): - PTP over UDP with the ocelot-8021q DSA tagging protocol - basic QoS classification on Felix DSA switch using dcbnl - port mirroring for ocelot switches - Microchip high-speed industrial Ethernet (sparx5): - offloading of bridge port flooding flags - PTP Hardware Clock - Other embedded switches: - lan966x: PTP Hardward Clock - qca8k: mdio read/write operations via crafted Ethernet packets - Qualcomm 802.11ax WiFi (ath11k): - add LDPC FEC type and 802.11ax High Efficiency data in radiotap - enable RX PPDU stats in monitor co-exist mode - Intel WiFi (iwlwifi): - UHB TAS enablement via BIOS - band disablement via BIOS - channel switch offload - 32 Rx AMPDU sessions in newer devices - MediaTek WiFi (mt76): - background radar detection - thermal management improvements on mt7915 - SAR support for more mt76 platforms - MBSSID and 6 GHz band on mt7915 - RealTek WiFi: - rtw89: AP mode - rtw89: 160 MHz channels and 6 GHz band - rtw89: hardware scan - Bluetooth: - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS) - Microchip CAN (mcp251xfd): - multiple RX-FIFOs and runtime configurable RX/TX rings - internal PLL, runtime PM handling simplification - improve chip detection and error handling after wakeup" * tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits) llc: fix netdevice reference leaks in llc_ui_bind() drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool ice: don't allow to run ice_send_event_to_aux() in atomic ctx ice: fix 'scheduling while atomic' on aux critical err interrupt net/sched: fix incorrect vlan_push_eth dest field net: bridge: mst: Restrict info size queries to bridge ports net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init() drivers: net: xgene: Fix regression in CRC stripping net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT net: dsa: fix missing host-filtered multicast addresses net/mlx5e: Fix build warning, detected write beyond size of field iwlwifi: mvm: Don't fail if PPAG isn't supported selftests/bpf: Fix kprobe_multi test. Revert "rethook: x86: Add rethook x86 implementation" Revert "arm64: rethook: Add arm64 rethook implementation" Revert "powerpc: Add rethook support" Revert "ARM: rethook: Add rethook arm implementation" netdevice: add missing dm_private kdoc net: bridge: mst: prevent NULL deref in br_mst_info_size() selftests: forwarding: Use same VRF for port and VLAN upper ... -
https://github.com/awilliam/linux-vfioLinus Torvalds authored
Pull VFIO updates from Alex Williamson: - Introduce new device migration uAPI and implement device specific mlx5 vfio-pci variant driver supporting new protocol (Jason Gunthorpe, Yishai Hadas, Leon Romanovsky) - New HiSilicon acc vfio-pci variant driver, also supporting migration interface (Shameer Kolothum, Longfang Liu) - D3hot fixes for vfio-pci-core (Abhishek Sahu) - Document new vfio-pci variant driver acceptance criteria (Alex Williamson) - Fix UML build unresolved ioport_{un}map() functions (Alex Williamson) - Fix MAINTAINERS due to header movement (Lukas Bulwahn) * tag 'vfio-v5.18-rc1' of https://github.com/awilliam/linux-vfio: (31 commits) vfio-pci: Provide reviewers and acceptance criteria for variant drivers MAINTAINERS: adjust entry for header movement in hisilicon qm driver hisi_acc_vfio_pci: Use its own PCI reset_done error handler hisi_acc_vfio_pci: Add support for VFIO live migration crypto: hisilicon/qm: Set the VF QM state register hisi_acc_vfio_pci: Add helper to retrieve the struct pci_driver hisi_acc_vfio_pci: Restrict access to VF dev BAR2 migration region hisi_acc_vfio_pci: add new vfio_pci driver for HiSilicon ACC devices hisi_acc_qm: Move VF PCI device IDs to common header crypto: hisilicon/qm: Move few definitions to common header crypto: hisilicon/qm: Move the QM header to include/linux vfio/mlx5: Fix to not use 0 as NULL pointer PCI/IOV: Fix wrong kernel-doc identifier vfio/mlx5: Use its own PCI reset_done error handler vfio/pci: Expose vfio_pci_core_aer_err_detected() vfio/mlx5: Implement vfio_pci driver for mlx5 devices vfio/mlx5: Expose migration commands over mlx5 device vfio: Remove migration protocol v1 documentation vfio: Extend the device migration protocol with RUNNING_P2P vfio: Define device migration protocol v2 ... -
Linus Torvalds authored
Merge tag 'hyperv-next-signed-20220322' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: "Minor patches from various people" * tag 'hyperv-next-signed-20220322' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Output host build info as normal Windows version number hv_balloon: rate-limit "Unhandled message" warning drivers: hv: log when enabling crash_kexec_post_notifiers hv_utils: Add comment about max VMbus packet size in VSS driver Drivers: hv: Compare cpumasks and not their weights in init_vp_index() Drivers: hv: Rename 'alloced' to 'allocated' Drivers: hv: vmbus: Use struct_size() helper in kmalloc()
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm updates from Paolo Bonzini: "ARM: - Proper emulation of the OSLock feature of the debug architecture - Scalibility improvements for the MMU lock when dirty logging is on - New VMID allocator, which will eventually help with SVA in VMs - Better support for PMUs in heterogenous systems - PSCI 1.1 support, enabling support for SYSTEM_RESET2 - Implement CONFIG_DEBUG_LIST at EL2 - Make CONFIG_ARM64_ERRATUM_2077057 default y - Reduce the overhead of VM exit when no interrupt is pending - Remove traces of 32bit ARM host support from the documentation - Updated vgic selftests - Various cleanups, doc updates and spelling fixes RISC-V: - Prevent KVM_COMPAT from being selected - Optimize __kvm_riscv_switch_to() implementation - RISC-V SBI v0.3 support s390: - memop selftest - fix SCK locking - adapter interruptions virtualization for secure guests - add Claudio Imbrenda as maintainer - first step to do proper storage key checking x86: - Continue switching kvm_x86_ops to static_call(); introduce static_call_cond() and __static_call_ret0 when applicable. - Cleanup unused arguments in several functions - Synthesize AMD 0x80000021 leaf - Fixes and optimization for Hyper-V sparse-bank hypercalls - Implement Hyper-V's enlightened MSR bitmap for nested SVM - Remove MMU auditing - Eager splitting of page tables (new aka "TDP" MMU only) when dirty page tracking is enabled - Cleanup the implementation of the guest PGD cache - Preparation for the implementation of Intel IPI virtualization - Fix some segment descriptor checks in the emulator - Allow AMD AVIC support on systems with physical APIC ID above 255 - Better API to disable virtualization quirks - Fixes and optimizations for the zapping of page tables: - Zap roots in two passes, avoiding RCU read-side critical sections that last too long for very large guests backed by 4 KiB SPTEs. - Zap invalid and defunct roots asynchronously via concurrency-managed work queue. - Allowing yielding when zapping TDP MMU roots in response to the root's last reference being put. - Batch more TLB flushes with an RCU trick. Whoever frees the paging structure now holds RCU as a proxy for all vCPUs running in the guest, i.e. to prolongs the grace period on their behalf. It then kicks the the vCPUs out of guest mode before doing rcu_read_unlock(). Generic: - Introduce __vcalloc and use it for very large allocations that need memcg accounting" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits) KVM: use kvcalloc for array allocations KVM: x86: Introduce KVM_CAP_DISABLE_QUIRKS2 kvm: x86: Require const tsc for RT KVM: x86: synthesize CPUID leaf 0x80000021h if useful KVM: x86: add support for CPUID leaf 0x80000021 KVM: x86: do not use KVM_X86_OP_OPTIONAL_RET0 for get_mt_mask Revert "KVM: x86/mmu: Zap only TDP MMU leafs in kvm_zap_gfn_range()" kvm: x86/mmu: Flush TLB before zap_gfn_range releases RCU KVM: arm64: fix typos in comments KVM: arm64: Generalise VM features into a set of flags KVM: s390: selftests: Add error memop tests KVM: s390: selftests: Add more copy memop tests KVM: s390: selftests: Add named stages for memop test KVM: s390: selftests: Add macro as abstraction for MEM_OP KVM: s390: selftests: Split memop tests KVM: s390x: fix SCK locking RISC-V: KVM: Implement SBI HSM suspend call RISC-V: KVM: Add common kvm_riscv_vcpu_wfi() function RISC-V: Add SBI HSM suspend related defines RISC-V: KVM: Implement SBI v0.3 SRST extension ... -
git://git.osdn.net/gitroot/tomoyo/tomoyo-test1Linus Torvalds authored
Pull tomoyo update from Tetsuo Handa: "Avoid unnecessarily leaking kernel command line arguments" * tag 'tomoyo-pr-20220322' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1: TOMOYO: fix __setup handlers return values
-
Linus Torvalds authored
Merge tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull flexible-array transformations from Gustavo Silva: "Treewide patch that replaces zero-length arrays with flexible-array members. This has been baking in linux-next for a whole development cycle" * tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: treewide: Replace zero-length arrays with flexible-array members
-
Linus Torvalds authored
Merge tag 'prlimit-tasklist_lock-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull tasklist_lock optimizations from Eric Biederman: "prlimit and getpriority tasklist_lock optimizations The tasklist_lock popped up as a scalability bottleneck on some testing workloads. The readlocks in do_prlimit and set/getpriority are not necessary in all cases. Based on a cycles profile, it looked like ~87% of the time was spent in the kernel, ~42% of which was just trying to get *some* spinlock (queued_spin_lock_slowpath, not necessarily the tasklist_lock). The big offenders (with rough percentages in cycles of the overall trace): - do_wait 11% - setpriority 8% (done previously in commit 7f8ca0ed) - kill 8% - do_exit 5% - clone 3% - prlimit64 2% (this patchset) - getrlimit 1% (this patchset) I can't easily test this patchset on the original workload for various reasons. Instead, I used the microbenchmark below to at least verify there was some improvement. This patchset had a 28% speedup (12% from baseline to set/getprio, then another 14% for prlimit). This series used to do the setpriority case, but an almost identical change was merged as commit 7f8ca0ed ("kernel/sys.c: only take tasklist_lock for get/setpriority(PRIO_PGRP)") so that has been dropped from here. One interesting thing is that my libc's getrlimit() was calling prlimit64, so hoisting the read_lock(tasklist_lock) into sys_prlimit64 had no effect - it essentially optimized the older syscalls only. I didn't do that in this patchset, but figured I'd mention it since it was an option from the previous patch's discussion" micobenchmark.c: --------------- int main(int argc, char **argv) { pid_t child; struct rlimit rlim[1]; fork(); fork(); fork(); fork(); fork(); fork(); for (int i = 0; i < 5000; i++) { child = fork(); if (child < 0) exit(1); if (child > 0) { usleep(1000); kill(child, SIGTERM); waitpid(child, NULL, 0); } else { for (;;) { setpriority(PRIO_PROCESS, 0, getpriority(PRIO_PROCESS, 0)); getrlimit(RLIMIT_CPU, rlim); } } } return 0; } Link: https://lore.kernel.org/lkml/20211213220401.1039578-1-brho@google.com/ [v1] Link: https://lore.kernel.org/lkml/20220105212828.197013-1-brho@google.com/ [v2] Link: https://lore.kernel.org/lkml/20220106172041.522167-1-brho@google.com/ [v3] * tag 'prlimit-tasklist_lock-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: prlimit: do not grab the tasklist_lock prlimit: make do_prlimit() static
-
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linuxLinus Torvalds authored
Pull mount attributes PREEMPT_RT update from Christian Brauner: "This contains Sebastian's fix to make changing mount attributes/getting write access compatible with CONFIG_PREEMPT_RT. The change only applies when users explicitly opt-in to real-time via CONFIG_PREEMPT_RT otherwise things are exactly as before. We've waited quite a long time with this to make sure folks could take a good look" * tag 'fs.rt.v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: fs/namespace: Boost the mount_lock.lock owner instead of spinning on PREEMPT_RT.
-
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linuxLinus Torvalds authored
Pull mount_setattr updates from Christian Brauner: "This contains a few more patches to massage the mount_setattr() codepaths and one minor fix to reuse a helper we added some time back. The final two patches do similar cleanups in different ways. One patch is mine and the other is Al's who was nice enough to give me a branch for it. Since his came in later and my branch had been sitting in -next for quite some time we just put his on top instead of swap them" * tag 'fs.v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: mount_setattr(): clean the control flow and calling conventions fs: clean up mount_setattr control flow fs: don't open-code mnt_hold_writers() fs: simplify check in mount_setattr_commit() fs: add mnt_allow_writers() and simplify mount_setattr_prepare()
-
Marco Elver authored
This reverts commit ea91a1d4. Since df05c0e9 ("Documentation: Raise the minimum supported version of LLVM to 11.0.0") the minimum Clang version is now 11.0, which fixed the UBSAN/KCSAN vs. KCOV incompatibilities. Link: https://bugs.llvm.org/show_bug.cgi?id=45831 Link: https://lkml.kernel.org/r/YaodyZzu0MTCJcvO@elver.google.com Link: https://lkml.kernel.org/r/20220128105631.509772-1-elver@google.comSigned-off-by:
Marco Elver <elver@google.com> Reviewed-by:
Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Miaohe Lin authored
Since commit ebff7d8f ("mem hotunplug: fix kfree() of bootmem memory"), we could get a resource allocated during boot via alloc_resource(). And it's required to release the resource using free_resource(). Howerver, many people use kfree directly which will result in kernel BUG. In order to fix this without fixing every call site, just leak a couple of bytes in such corner case. Link: https://lkml.kernel.org/r/20220217083619.19305-1-linmiaohe@huawei.com Fixes: ebff7d8f ("mem hotunplug: fix kfree() of bootmem memory") Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Suggested-by:
David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Alistair Popple <apopple@nvidia.com> Signed-off-by:
-
Aleksandr Nogikh authored
Allocate the kcov buffer during KCOV_MODE_INIT in order to untie mmapping of a kcov instance and the actual coverage collection process. Modify kcov_mmap, so that it can be reliably used any number of times once KCOV_MODE_INIT has succeeded. These changes to the user-facing interface of the tool only weaken the preconditions, so all existing user space code should remain compatible with the new version. Link: https://lkml.kernel.org/r/20220117153634.150357-3-nogikh@google.comSigned-off-by:
Aleksandr Nogikh <nogikh@google.com> Reviewed-by:
Dmitry Vyukov <dvyukov@google.com> Reviewed-by:
Andrey Konovalov <andreyknvl@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Marco Elver <elver@google.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Taras Madan <tarasmadan@google.com> Signed-off-by:
-
Aleksandr Nogikh authored
Patch series "kcov: improve mmap processing", v3. Subsequent mmaps of the same kcov descriptor currently do not update the virtual memory of the task and yet return 0 (success). This is counter-intuitive and may lead to unexpected memory access errors. Also, this unnecessarily limits the functionality of kcov to only the simplest usage scenarios. Kcov instances are effectively forever attached to their first address spaces and it becomes impossible to e.g. reuse the same kcov handle in forked child processes without mmapping the memory first. This is exactly what we tried to do in syzkaller and inadvertently came upon this behavior. This patch series addresses the problem described above. This patch (of 3): Currently all ioctls are de facto processed under a spinlock in order to serialise them. This, however, prohibits the use of vmalloc and other memory management functions in the implementations of those ioctls, unnecessary complicating any further changes to the code. Let all ioctls first be processed inside the kcov_ioctl() function which should execute the ones that are not compatible with spinlock and then pass control to kcov_ioctl_locked() for all other ones. KCOV_REMOTE_ENABLE is processed both in kcov_ioctl() and kcov_ioctl_locked() as the steps are easily separable. Although it is still compatible with a spinlock, move KCOV_INIT_TRACE handling to kcov_ioctl(), so that the changes from the next commit are easier to follow. Link: https://lkml.kernel.org/r/20220117153634.150357-1-nogikh@google.com Link: https://lkml.kernel.org/r/20220117153634.150357-2-nogikh@google.comSigned-off-by:
-
Guilherme G. Piccoli authored
The panic_print setting allows users to collect more information in a panic event, like memory stats, tasks, CPUs backtraces, etc. This is an interesting debug mechanism, but currently the print event happens *after* kmsg_dump(), meaning that pstore, for example, cannot collect a dmesg with the panic_print extra information. This patch changes that in 2 steps: (a) The panic_print setting allows to replay the existing kernel log buffer to the console (bit 5), besides the extra information dump. This functionality makes sense only at the end of the panic() function. So, we hereby allow to distinguish the two situations by a new boolean parameter in the function panic_print_sys_info(). (b) With the above change, we can safely call panic_print_sys_info() before kmsg_dump(), allowing to dump the extra information when using pstore or other kmsg dumpers. The additional messages from panic_print could overwrite the oldest messages when the buffer is full. The only reasonable solution is to use a large enough log buffer, hence we added an advice into the kernel parameters documentation about that. Link: https://lkml.kernel.org/r/20220214141308.841525-1-gpiccoli@igalia.comSigned-off-by:Guilherme G. Piccoli <gpiccoli@igalia.com> Acked-by:
Baoquan He <bhe@redhat.com> Reviewed-by:
Petr Mladek <pmladek@suse.com> Reviewed-by:
Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Feng Tang <feng.tang@intel.com> Signed-off-by:
-
Guilherme G. Piccoli authored
Currently the "panic_print" parameter/sysctl allows some interesting debug information to be printed during a panic event. This is useful for example in cases the user cannot kdump due to resource limits, or if the user collects panic logs in a serial output (or pstore) and prefers a fast reboot instead of a kdump. Happens that currently there's no way to see all CPUs backtraces in a panic using "panic_print" on architectures that support that. We do have "oops_all_cpu_backtrace" sysctl, but although partially overlapping in the functionality, they are orthogonal in nature: "panic_print" is a panic tuning (and we have panics without oopses, like direct calls to panic() or maybe other paths that don't go through oops_enter() function), and the original purpose of "oops_all_cpu_backtrace" is to provide more information on oopses for cases in which the users desire to continue running the kernel even after an oops, i.e., used in non-panic scenarios. So, we hereby introduce an additional bit for "panic_print" to allow dumping the CPUs backtraces during a panic event. Link: https://lkml.kernel.org/r/20211109202848.610874-3-gpiccoli@igalia.comSigned-off-by:
Feng Tang <feng.tang@intel.com> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by:
-
Guilherme G. Piccoli authored
Patch series "Some improvements on panic_print". This is a mix of a documentation fix with some additions to the "panic_print" syscall / parameter. The goal here is being able to collect all CPUs backtraces during a panic event and also to enable "panic_print" in a kdump event - details of the reasoning and design choices in the patches. This patch (of 3): Commit de6da1e8 ("panic: add an option to replay all the printk message in buffer") added a new bit to the sysctl/kernel parameter "panic_print", but the documentation was added only in kernel-parameters.txt, not in the sysctl guide. Fix it here by adding bit 5 to sysctl admin-guide documentation. [rdunlap@infradead.org: fix table format warning] Link: https://lkml.kernel.org/r/20220109055635.6999-1-rdunlap@infradead.org Link: https://lkml.kernel.org/r/20211109202848.610874-1-gpiccoli@igalia.com Link: https://lkml.kernel.org/r/20211109202848.610874-2-gpiccoli@igalia.com Fixes: de6da1e8 ("panic: add an option to replay all the printk message in buffer") Signed-off-by:
-
Lukas Bulwahn authored
make clang-analyzer on x86_64 defconfig caught my attention with: kernel/taskstats.c:120:2: warning: Value stored to 'rc' is never read \ [clang-analyzer-deadcode.DeadStores] rc = 0; ^ Commit d94a0415 ("taskstats: free skb, avoid returns in send_cpu_listeners") made send_cpu_listeners() not return a value and hence, the rc variable remained only to be used within the loop where it is always assigned before read and it does not need any other initialisation. So, simply remove this unneeded dead initializing assignment. As compilers will detect this unneeded assignment and optimize this anyway, the resulting object code is identical before and after this change. No functional change. No change to object code. [akpm@linux-foundation.org: reduce scope of `rc'] Link: https://lkml.kernel.org/r/20220307093942.21310-1-lukas.bulwahn@gmail.comSigned-off-by:Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Tom Rix <trix@redhat.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Tiezhu Yang authored
panic_on_warn is unset inside panic(), so no need to unset it before calling panic() in end_report(). Link: https://lkml.kernel.org/r/1644324666-15947-6-git-send-email-yangtiezhu@loongson.cnSigned-off-by:
Tiezhu Yang <yangtiezhu@loongson.cn> Reviewed-by:
-
Tiezhu Yang authored
panic_on_warn is unset inside panic(), so no need to unset it before calling panic() in ubsan_epilogue(). Link: https://lkml.kernel.org/r/1644324666-15947-5-git-send-email-yangtiezhu@loongson.cnSigned-off-by:
-
Tiezhu Yang authored
In the current code, the following three places need to unset panic_on_warn before calling panic() to avoid recursive panics: kernel/kcsan/report.c: print_report() kernel/sched/core.c: __schedule_bug() mm/kfence/report.c: kfence_report_error() In order to avoid copy-pasting "panic_on_warn = 0" all over the places, it is better to move it inside panic() and then remove it from the other places. Link: https://lkml.kernel.org/r/1644324666-15947-4-git-send-email-yangtiezhu@loongson.cnSigned-off-by:
-
Tiezhu Yang authored
Except cp and makedumpfile, add scp example to write out the dump file. Link: https://lkml.kernel.org/r/1644324666-15947-3-git-send-email-yangtiezhu@loongson.cnSigned-off-by:
-
Tiezhu Yang authored
Patch series "Update doc and fix some issues about kdump", v2. This patch (of 5): After commit 6a108a14 ("kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT"), "Configure standard kernel features (for small systems)" is not exist, we should use "Configure standard kernel features (expert users)" now. Link: https://lkml.kernel.org/r/1644324666-15947-1-git-send-email-yangtiezhu@loongson.cn Link: https://lkml.kernel.org/r/1644324666-15947-2-git-send-email-yangtiezhu@loongson.cnSigned-off-by:
-
Jisheng Zhang authored
Replace the conditional compilation using "#ifdef CONFIG_KEXEC_CORE" by a check for "IS_ENABLED(CONFIG_KEXEC_CORE)", to simplify the code and increase compile coverage. Link: https://lkml.kernel.org/r/20211206160514.2000-5-jszhang@kernel.orgSigned-off-by:
Jisheng Zhang <jszhang@kernel.org> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Acked-by:
-
Jisheng Zhang authored
Replace the conditional compilation using "#ifdef CONFIG_KEXEC_CORE" by a check for "IS_ENABLED(CONFIG_KEXEC_CORE)", to simplify the code and increase compile coverage. Link: https://lkml.kernel.org/r/20211206160514.2000-4-jszhang@kernel.orgSigned-off-by:
-
Jisheng Zhang authored
Replace the conditional compilation using "#ifdef CONFIG_KEXEC_CORE" by a check for "IS_ENABLED(CONFIG_KEXEC_CORE)", to simplify the code and increase compile coverage. Link: https://lkml.kernel.org/r/20211206160514.2000-3-jszhang@kernel.orgSigned-off-by:
Palmer Dabbelt <palmer@rivosinc.com> Acked-by:
-
Jisheng Zhang authored
Patch series "kexec: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef", v2. Replace the conditional compilation using "#ifdef CONFIG_KEXEC_CORE" by a check for "IS_ENABLED(CONFIG_KEXEC_CORE)", to simplify the code and increase compile coverage. I only modified x86, arm, arm64 and riscv, other architectures such as sh, powerpc and s390 are better to be kept kexec code as-is so they are not touched. This patch (of 5): Make the forward declarations of crashk_res, crashk_low_res and crash_notes always visible. Code referring to these symbols can then just check for IS_ENABLED(CONFIG_KEXEC_CORE), instead of requiring conditional compilation using an #ifdef, thus preparing to increase compile coverage and simplify the code. Link: https://lkml.kernel.org/r/20211206160514.2000-1-jszhang@kernel.org Link: https://lkml.kernel.org/r/20211206160514.2000-2-jszhang@kernel.orgSigned-off-by:
-
Sebastian Andrzej Siewior authored
All callers of cgroup_rstat_flush_locked() acquire cgroup_rstat_lock either with spin_lock_irq() or spin_lock_irqsave(). cgroup_rstat_flush_locked() itself acquires cgroup_rstat_cpu_lock which is a raw_spin_lock. This lock is also acquired in cgroup_rstat_updated() in IRQ context and therefore requires _irqsave() locking suffix in cgroup_rstat_flush_locked(). Since there is no difference between spin_lock_t and raw_spin_lock_t on !RT lockdep does not complain here. On RT lockdep complains because the interrupts were not disabled here and a deadlock is possible. Acquire the raw_spin_lock_t with disabled interrupts. Link: https://lkml.kernel.org/r/20220301122143.1521823-2-bigeasy@linutronix.deSigned-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by:
Tejun Heo <tj@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Zefan Li <lizefan.x@bytedance.com> From: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Subject: cgroup: add a comment to cgroup_rstat_flush_locked(). Add a comment why spin_lock_irq() -> raw_spin_lock_irqsave() is needed. Link: https://lkml.kernel.org/r/Yh+DOK73hfVV5ThX@linutronix.deSigned-off-by:
-
Helge Deller authored
The put_user(val,ptr) macro wants a pointer to a simple type, but in fat_ioctl_filldir() the d_name field references an "array of chars". Be more accurate and explicitly give the pointer to the first character of the d_name[] array. I noticed that issue while trying to optimize the parisc put_user() macro and used an intermediate variable to store the pointer. In that case I got this error: In file included from include/linux/uaccess.h:11, from include/linux/compat.h:17, from fs/fat/dir.c:18: fs/fat/dir.c: In function `fat_ioctl_filldir': fs/fat/dir.c:725:33: error: invalid initializer 725 | if (put_user(0, d2->d_name) || \ | ^~ include/asm/uaccess.h:152:33: note: in definition of macro `__put_user' 152 | __typeof__(ptr) __ptr = ptr; \ | ^~~ fs/fat/dir.c:759:1: note: in expansion of macro `FAT_IOCTL_FILLDIR_FUNC' 759 | FAT_IOCTL_FILLDIR_FUNC(fat_ioctl_filldir, __fat_dirent) Andreas Schwab <schwab@linux-m68k.org> suggested to use __typeof__(&*(ptr)) __ptr = ptr; instead. This works, but nevertheless it's probably reasonable to fix the original caller too. Link: https://lkml.kernel.org/r/Ygo+A9MREmC1H3kr@p100Signed-off-by:Helge Deller <deller@gmx.de> Acked-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: David Laight <David.Laight@aculab.com> Cc: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by:
-
Qinghua Jin authored
Testcase: 1. create a minix file system and mount it 2. open a file on the file system with O_RDWR|O_CREAT|O_TRUNC|O_DIRECT 3. open fails with -EINVAL but leaves an empty file behind. All other open() failures don't leave the failed open files behind. It is hard to check the direct_IO op before creating the inode. Just as ext4 and btrfs do, this patch will resolve the issue by allowing to create the file with O_DIRECT but returning error when writing the file. Link: https://lkml.kernel.org/r/20220107133626.413379-1-qhjin.dev@gmail.comSigned-off-by:
Qinghua Jin <qhjin.dev@gmail.com> Reported-by:
Colin Ian King <colin.king@intel.com> Reviewed-by:
Jan Kara <jack@suse.cz> Acked-by:
Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by:
-
Andrei Vagin authored
head, tail, ring_size are declared as unsigned int, so all local variables that operate with these fields have to be unsigned to avoid signed integer overflow. Right now, it isn't an issue because the maximum pipe size is limited by 1U<<31. Link: https://lkml.kernel.org/r/20220106171946.36128-1-avagin@gmail.comSigned-off-by:
Andrei Vagin <avagin@gmail.com> Suggested-by:
Dmitry Safonov <0x7f454c46@gmail.com> Acked-by:
-
Andrei Vagin authored
Right now, kcalloc is used to allocate a pipe_buffer array. The size of the pipe_buffer struct is 40 bytes. kcalloc allows allocating reliably chunks with sizes less or equal to PAGE_ALLOC_COSTLY_ORDER (3). It means that the maximum pipe size is 3.2MB in this case. In CRIU, we use pipes to dump processes memory. CRIU freezes a target process, injects a parasite code into it and then this code splices memory into pipes. If a maximum pipe size is small, we need to do many iterations or create many pipes. kvcalloc attempt to allocate physically contiguous memory, but upon failure, fall back to non-contiguous (vmalloc) allocation and so it isn't limited by PAGE_ALLOC_COSTLY_ORDER. The maximum pipe size for non-root users is limited by the /proc/sys/fs/pipe-max-size sysctl that is 1MB by default, so only the root user will be able to trigger vmalloc allocations. Link: https://lkml.kernel.org/r/20220104171058.22580-1-avagin@gmail.comSigned-off-by:
-
Randy Dunlap authored
initcall_blacklist() should return 1 to indicate that it handled its cmdline arguments. set_debug_rodata() should return 1 to indicate that it handled its cmdline arguments. Print a warning if the option string is invalid. This prevents these strings from being added to the 'init' program's environment as they are not init arguments/parameters. Link: https://lkml.kernel.org/r/20220221050901.23985-1-rdunlap@infradead.orgSigned-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
Igor Zhbanov <i.zhbanov@omprussia.ru> Cc: Ingo Molnar <mingo@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Randy Dunlap authored
Igor noted in [1] that there are quite a few __setup() handling functions that return incorrect values. Doing this can be harmless, but it can also cause strings to be added to init's argument or environment list, polluting them. Since __setup() handling and return values are not documented, first add documentation for that. Also add more documentation for early_param() handling and return values. For __setup() functions, returning 0 (not handled) has questionable value if it is just a malformed option value, as in rodata=junk since returning 0 would just cause "rodata=junk" to be added to init's environment unnecessarily: Run /sbin/init as init process with arguments: /sbin/init with environment: HOME=/ TERM=linux splash=native rodata=junk Also, there are no recommendations on whether to print a warning when an unknown parameter value is seen. I am not addressing that here. [1] lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Link: https://lkml.kernel.org/r/20220221050852.1147-1-rdunlap@infradead.orgSigned-off-by: -
Mark-PK Tsai authored
Use ktime_us_delta() to make the initcall_debug log more precise than right shifting the result of ktime_to_ns() by 10 bits. Link: https://lkml.kernel.org/r/20220209053350.15771-1-mark-pk.tsai@mediatek.comSigned-off-by:
Mark-PK Tsai <mark-pk.tsai@mediatek.com> Reviewed-by:
Andrew Halaney <ahalaney@redhat.com> Tested-by:
-
Sagar Patel authored
Commit 0ee3e7b8 ("checkpatch: get default codespell dictionary path from package location") introduced the ability to search for the codespell dictionary rather than hardcoding its path. codespell requires Python 3.6 or above, but on some systems, the python executable is a Python 2.7 interpreter. In this case, searching for the dictionary fails, subsequently making codespell fail: No codespell typos will be found - file '/usr/share/codespell/dictionary.txt': No such file or directory So, use python3 to remove ambiguity. In addition, when searching for dictionary.txt, do not check if the codespell executable exists since, - checkpatch.pl only uses dictionary.txt, not the codespell executable. - codespell can be installed via a Python package manager, in which case the codespell executable may not be present in a typical $PATH, but a dictionary does exist. Link: https://lkml.kernel.org/r/20220309180048.147672-1-sagarmp@cs.unc.eduSigned-off-by:
Sagar Patel <sagarmp@cs.unc.edu> Reviewed-by:
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Cc: Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Add early_param as another exception to the blank line preferred after function/struct/union declaration or definition test. Link: https://lkml.kernel.org/r/3bd6ada59f411a7685d7e64eeb670540d4bfdcde.camel@perches.comSigned-off-by:
Joe Perches <joe@perches.com> Cc: Dwaipayan Ray <dwaipayanray1@gmail.com> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
-
Joe Perches authored
Single line code like: if (foo) bar; should generally be written: if (foo) bar; Add a --fix test to do so. This fix is not done when an ASSIGN_IN_IF in the same line exists. Link: https://lkml.kernel.org/r/20220128185924.80137-2-joe@perches.comSigned-off-by:
-
Joe Perches authored
There is no effective difference. Given the large number of uses of "GPL v2", emit this message only for patches as a trivial treeside sed could be done one day. Ref: commit bf7fbeea ("module: Cure the MODULE_LICENSE "GPL" vs. "GPL v2" bogosity") Link: https://lkml.kernel.org/r/20220128185924.80137-1-joe@perches.comSigned-off-by:
-
Randy Dunlap authored
Fix kernel-doc warings in lib/bitmap.c: lib/bitmap.c:498: warning: Function parameter or member 'buf' not described in 'bitmap_print_to_buf' lib/bitmap.c:498: warning: Function parameter or member 'maskp' not described in 'bitmap_print_to_buf' lib/bitmap.c:498: warning: Function parameter or member 'nmaskbits' not described in 'bitmap_print_to_buf' lib/bitmap.c:498: warning: Function parameter or member 'off' not described in 'bitmap_print_to_buf' lib/bitmap.c:498: warning: Function parameter or member 'count' not described in 'bitmap_print_to_buf' lib/bitmap.c:561: warning: contents before sections lib/bitmap.c:606: warning: Function parameter or member 'buf' not described in 'bitmap_print_list_to_buf' lib/bitmap.c:606: warning: Function parameter or member 'maskp' not described in 'bitmap_print_list_to_buf' lib/bitmap.c:606: warning: Function parameter or member 'nmaskbits' not described in 'bitmap_print_list_to_buf' lib/bitmap.c:606: warning: Function parameter or member 'off' not described in 'bitmap_print_list_to_buf' lib/bitmap.c:606: warning: Function parameter or member 'count' not described in 'bitmap_print_list_to_buf' lib/bitmap.c:819: warning: missing initial short description on line: * bitmap_parselist_user() This still leaves 15 warnings for function return values not described, similar to this one: bitmap.c:890: warning: No description found for return value of 'bitmap_parse' Link: https://lkml.kernel.org/r/20220306065823.5153-1-rdunlap@infradead.org Fixes: 1fae5629 ("cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list") Fixes: 4b060420 ("bitmap, irq: add smp_affinity_list interface to /proc/irq") Signed-off-by:
-
