- 07 Dec, 2023 2 commits
-
-
AngeloGioacchino Del Regno authored
Instead of walking the entire parent node for something that has the right compatible, use the scp_get() function provided by the MediaTek SCP remoteproc driver to retrieve a handle to mtk_scp through the devicetree "mediatek,scp" (phandle) property. In case of multi-core SCP, this also allows to select a specific core. Reviewed-by:
Chen-Yu Tsai <wenst@chromium.org> Signed-off-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by:
Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
AngeloGioacchino Del Regno authored
The MDP3 RDMA needs to communicate with the SCP remote processor: allow specifying a phandle to a SCP core. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Reviewed-by:
-
- 04 Dec, 2023 38 commits
-
-
Sebastian Reichel authored
v4l2_async_unbind_subdev_one(), which is called in the line following the list_move() operation contains list_move_tail() for the same entry and overrides anything list_move() did. Thus it can be removed. Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Sebastian Reichel authored
The list deletion call dropped here is already called from the helper function in the line before. Having a second list_del() call results in either a warning (with CONFIG_DEBUG_LIST=y): list_del corruption, c46c8198->next is LIST_POISON1 (00000100) If CONFIG_DEBUG_LIST is disabled the operation results in a kernel error due to NULL pointer dereference. Fixes: 28a12957 ("media: v4l: async: Allow multiple connections between entities") Signed-off-by:
-
Laurent Pinchart authored
Fix a simple indentation issue in the v4l2-subdev.h header. Fixes: f57fa295 ("media: v4l2-subdev: Add new ioctl for client capabilities") Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Sakari Ailus authored
Use V4L2 CCI for accessing device's registers. The 8-bit compatibility read option is removed but this is supported by regmap through other means. Also the CCS register definitions are re-generated with V4L2 CCI definitions. The older SMIA++ register definitions have been manually converted. Signed-off-by:
-
Sakari Ailus authored
Separate CCS static data read-only register access in ccs-reg-access.c by naming them differently. The code in this file generally deals with reading and writing registers where as static data (when it comes to ccs_static_data_read_ro_reg()) contains the read-only register values but no hardware registers are accessed in that case. Signed-off-by:
-
Sakari Ailus authored
Generate register definitions that are fit for use with V4L2 CCI. Signed-off-by:
-
Sakari Ailus authored
Add CCI_REG_WIDTH() macro to obtain register width in bits and similarly, CCI_REG_WIDTH_BYTES() to obtain it in bytes. Also add CCI_REG_ADDR() macro to obtain the address of a register. Use both macros in v4l2-cci.c, too. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
-
Sakari Ailus authored
Provide a few bits for drivers to store private information on register definitions. Signed-off-by:
-
Sakari Ailus authored
linux/bits.h is needed for GENMASK(). Include it. Signed-off-by:
-
Laurent Pinchart authored
The isc_try_fse() function, called from isc_validate(), takes two parameters, an isc_device pointer, and a v4l2_subdev_state pointer. The isc_device is accessed but not modified by the function. The state is modified, including the struct v4l2_subdev_pad_config array it points to, but they are then never used by the caller. Furthermore, the V4L2 subdev operation called by isc_try_fse() doesn't modify the subdev it is called on. The isc_try_fse() function has thus no effect, and can just be dropped. Signed-off-by:
Eugen Hristev <eugen.hristev@collabora.com> Tested-by:
-
Sakari Ailus authored
Document that sub-device initialisation needs to complete before the async sub-device is registered as there is no further driver action needed before the sensor becomes accessible via the UAPI. Signed-off-by:
-
Sakari Ailus authored
As the sensor may be accessible right after its async sub-device is registered, enable runtime PM before doing so. Signed-off-by:
Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by:
-
Sakari Ailus authored
A number of CCS register value limits are in ireal or float format. Also convert them to integers for easier interpretation. Signed-off-by:
-
Bingbu Cao authored
As the sensor device maybe accessible right after its async sub-device is registered, such as ipu-bridge will try to power up sensor by sensor's client device's runtime PM from the async notifier callback, if runtime PM is not enabled, it will fail. So runtime PM should be ready before its async sub-device is registered and accessible by others. Fixes: d3f863a6 ("media: i2c: Add ov9734 image sensor driver") Cc: stable@vger.kernel.org Signed-off-by:
Bingbu Cao <bingbu.cao@intel.com> Signed-off-by:
-
Bingbu Cao authored
As the sensor device maybe accessible right after its async sub-device is registered, such as ipu-bridge will try to power up sensor by sensor's client device's runtime PM from the async notifier callback, if runtime PM is not enabled, it will fail. So runtime PM should be ready before its async sub-device is registered and accessible by others. Fixes: 7ee85054 ("media: Add sensor driver support for the ov13b10 camera.") Cc: stable@vger.kernel.org Signed-off-by:
-
Bingbu Cao authored
As the sensor device maybe accessible right after its async sub-device is registered, such as ipu-bridge will try to power up sensor by sensor's client device's runtime PM from the async notifier callback, if runtime PM is not enabled, it will fail. So runtime PM should be ready before its async sub-device is registered and accessible by others. It also sets the runtime PM status to active as the sensor was turned on by i2c-core. Fixes: 0827b58d ("media: i2c: add ov01a10 image sensor driver") Cc: stable@vger.kernel.org Signed-off-by:
-
Bingbu Cao authored
As the sensor device maybe accessible right after its async sub-device is registered, such as ipu-bridge will try to power up sensor by sensor's client device's runtime PM from the async notifier callback, if runtime PM is not enabled, it will fail. So runtime PM should be ready before its async sub-device is registered and accessible by others. Fixes: df0b5c4a ("media: add imx355 camera sensor driver") Cc: stable@vger.kernel.org Signed-off-by:
-
Hugues Fruchet authored
This V4L2 subdev driver enables Digital Camera Memory Interface Pixel Processor(DCMIPP) of STMicroelectronics STM32 SoC series. Signed-off-by:
Hugues Fruchet <hugues.fruchet@foss.st.com> Signed-off-by:
Alain Volmat <alain.volmat@foss.st.com> Signed-off-by:
-
Alain Volmat authored
Add the entry related to the STM32 MEDIA DCMIPP driver within the MAINTAINERS file. Add myself as maintainer of the DCMI driver as well. Signed-off-by:
-
Alain Volmat authored
Add the yaml binding for the ST Microelectronics STM32 DCMIPP (Digital Camera Memory Interface Pixel Processor) Signed-off-by:
-
Alain Volmat authored
Allow parsing of the v4l2_fwnode properties from the DT and addition of those properties (such as orientation, rotation). Signed-off-by:
-
Alain Volmat authored
Any V4L2 subdevice that implements controls and declares V4L2_SUBDEV_FL_HAS_DEVNODE should also declare V4L2_SUBDEV_FL_HAS_EVENTS and implement subscribe_event and unsubscribe_event hooks. With that done, v4l2-compliance testing is now ok. Signed-off-by:
-
Alain Volmat authored
Add support of MEDIA_BUS_FMT_Y8_1X8. Signed-off-by:
-
Alain Volmat authored
link_frequency variable within struct mipid02_dev seems to have never been used hence remove it. Signed-off-by:
-
Alain Volmat authored
Use MIPI data-type macros. Signed-off-by:
-
Alain Volmat authored
Store formats information within pad allowing to simplify further more the driver (mutex / format store within the driver structure no more necessary). Signed-off-by:
-
Alain Volmat authored
Use cci_read & cci_write functions for accessing registers. Signed-off-by:
-
Alain Volmat authored
As explained in the following series, subdev do not have to keep track of their streaming status: https://lore.kernel.org/linux-media/20230914181704.4811-1-laurent.pinchart@ideasonboard.com/Signed-off-by:
-
Alain Volmat authored
Use the helper v4l2_get_link_freq instead of performing manually check of the LINK_FREQ or PIXELRATE ctrls. Signed-off-by:
-
Alain Volmat authored
Use a copy of the struct v4l2_subdev_format when propagating format from the sink to source pad in order to avoid impacting the sink format returned to the application. Thanks to Jacopo Mondi for pointing the issue. Fixes: 6c01e6f3 ("media: st-mipid02: Propagate format from sink to source pad") Signed-off-by:
Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by:
Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by:
Benjamin Mugnier <benjamin.mugnier@foss.st.com> Signed-off-by:
-
Sakari Ailus authored
Parse MIPI DisCo for Imaging properties "mipi-img-lens-focus" and "mipi-img-flash-leds" for VCMs and flash LEDs. Signed-off-by:
-
Laurent Pinchart authored
The subdev .init_cfg() operation is affected by two issues: - It has long been extended to initialize a whole v4l2_subdev_state instead of just a v4l2_subdev_pad_config, but its name has stuck around. - Despite operating on a whole subdev state and not being directly exposed to the subdev users (either in-kernel or through the userspace API), .init_cfg() is categorized as a subdev pad operation. This participates in making the subdev API confusing for new developers. Fix it by renaming the operation to .init_state(), and make it a subdev internal operation. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> [Sakari Ailus: Resolved a conflict in Renesas vsp1 driver.] Signed-off-by:
-
Paul Elder authored
The THP7312 is an external camera ISP from THine. Add a V4L2 subdev driver for it. Signed-off-by:
Paul Elder <paul.elder@ideasonboard.com> Co-developed-by:
-
Laurent Pinchart authored
The THP7312 is an external ISP from THine. As such, it implements a large number of parameters to control all aspects of the image processing. Many of those controls are already standard in V4L2, but some are fairly device-specific. Reserve a range of 32 controls for the device. The driver will implement 4 device-specific controls to start with, define and document them. 28 additional device-specific controls should be enough for future development. Co-developed-by:
-
Paul Elder authored
The THP7312 is an external ISP from THine. Add DT bindings for it. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Sakari Ailus authored
Add fwnode_name_eq() to implement the functionality of of_node_name_eq() on fwnode property API. The same convention of ending the comparison at '@' (besides NUL) is applied on also both ACPI and swnode. The function is intended for comparing unit address-less node names on DT and firmware or swnodes compliant with DT bindings. Reviewed-by:
Rafael J. Wysocki <rafael@kernel.org> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Alain Volmat authored
Addition of support for the Galaxy Core GC2145 XVGA sensor. The sensor supports both DVP and CSI-2 interfaces however for the time being only CSI-2 is implemented. Configurations are currently based on initialization scripts coming from Galaxy Core and so for that purpose only 3 static resolutions are supported: - 640x480 - 1280x720 - 1600x1200 Signed-off-by:
-
Alain Volmat authored
Introduction of the Galaxy Core GC2145 XVGA CMOS camera sensor. Signed-off-by:
-
