- 14 Dec, 2021 1 commit
-
-
Kees Cook authored
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memset(), avoid intentionally writing across neighboring fields. Add struct_group() to mark "stat" region of struct lpfc_cgn_info that should be initialized to zero, and refactor the "data" region memset() to wipe everything up to the cgn_stats region. Link: https://lore.kernel.org/r/20211208195957.1603092-1-keescook@chromium.orgReviewed-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
- 07 Dec, 2021 33 commits
-
-
James Smart authored
Update lpfc version to 14.0.0.4. Link: https://lore.kernel.org/r/20211204002644.116455-10-jsmart2021@gmail.comCo-developed-by:
Justin Tee <justin.tee@broadcom.com> Signed-off-by:
-
James Smart authored
Dump raw CMF parameter information in debugfs cgn_buffer. Link: https://lore.kernel.org/r/20211204002644.116455-9-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Ensure read bytes data does not go over MBPI for CMF timer intervals that are purposely shortened. Link: https://lore.kernel.org/r/20211204002644.116455-8-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Calculate any extra bytes needed to account for timer accuracy. If we are less than LPFC_CMF_INTERVAL, then calculate the adjustment needed for total to reflect a full LPFC_CMF_INTERVAL. Add additional info to rxmonitor, and adjust some log formatting. Link: https://lore.kernel.org/r/20211204002644.116455-7-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Extraneous teardown routines are present in the firmware dump path causing altered states in firmware captures. When a firmware dump is requested via sysfs, trigger the dump immediately without tearing down structures and changing adapter state. The driver shall rely on pre-existing firmware error state clean up handlers to restore the adapter. Link: https://lore.kernel.org/r/20211204002644.116455-6-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
The driver is calling schedule_timeout after the DA_ID nameserver request and LOGO commands are issued to the fabric by the initiator virtual endport. These fixed delay functions are causing long delays in the driver's worker thread when processing discovery I/Os in a serialized fashion, which is then triggering mailbox timeout errors artificially. To fix this, don't wait on the DA_ID request to complete and call wait_event_timeout to allow the vport delete thread to make progress on an event driven basis rather than fixing the wait time. Link: https://lore.kernel.org/r/20211204002644.116455-5-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Issuing lpfc_force_rscn twice results in an ndlp kref use-after-free call trace. A prior patch reworked the get/put handling by ensuring nlp_get was done before WQE submission and a put was done in the completion path. Unfortunately, the issue_els_rscn path had a piece of legacy code that did a nlp_put, causing an imbalance on the ref counts. Fixed by removing the unnecessary legacy code snippet. Link: https://lore.kernel.org/r/20211204002644.116455-4-jsmart2021@gmail.com Fixes: 4430f7fd ("scsi: lpfc: Rework locations of ndlp reference taking") Cc: <stable@vger.kernel.org> # v5.11+ Co-developed-by:
-
James Smart authored
During heavy I/O testing with issue_lip to bounce the link, occasionally I/O is terminated with status 3 result 9, which means the RPI is suspended. The I/O is completed and this type of error will result in immediate retry by the SCSI layer. The retry count expires and the I/O fails and returns error to the application. To avoid these quick retry/retries exhausted scenarios change the return code given to the midlayer to DID_REQUEUE rather than DID_ERROR. This gets them retried, and eventually succeed when the link recovers. Link: https://lore.kernel.org/r/20211204002644.116455-3-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
During rmmod testing, messages appeared indicating lpfc_mbuf_pool entries were still busy. This situation was only seen doing rmmod after at least 1 vport (NPIV) instance was created and destroyed. The number of messages scaled with the number of vports created. When a vport is created, it can receive a PLOGI from another initiator Nport. When this happens, the driver prepares to ack the PLOGI and prepares an RPI for registration (via mbx cmd) which includes an mbuf allocation. During the unsolicited PLOGI processing and after the RPI preparation, the driver recognizes it is one of the vport instances and decides to reject the PLOGI. During the LS_RJT preparation for the PLOGI, the mailbox struct allocated for RPI registration is freed, but the mbuf that was also allocated is not released. Fix by freeing the mbuf with the mailbox struct in the LS_RJT path. As part of the code review to figure the issue out a couple of other areas where found that also would not have released the mbuf. Those are cleaned up as well. Link: https://lore.kernel.org/r/20211204002644.116455-2-jsmart2021@gmail.comCo-developed-by:
-
Bart Van Assche authored
The time spent in io_schedule() and also the interrupt latency are significant when submitting direct I/O to a UFS device. Hence this patch that implements polling support. User space software can enable polling by passing the RWF_HIPRI flag to the preadv2() system call or the IORING_SETUP_IOPOLL flag to the io_uring interface. Although the block layer supports to partition the tag space for interrupt-based completions (HCTX_TYPE_DEFAULT) purposes and polling (HCTX_TYPE_POLL), the choice has been made to use the same hardware queue for both hctx types because partitioning the tag space would negatively affect performance. On my test setup this patch increases IOPS from 2736 to 22000 (8x) for the following test: for hipri in 0 1; do fio --ioengine=io_uring --iodepth=1 --rw=randread \ --runtime=60 --time_based=1 --direct=1 --name=qd1 \ --filename=/dev/block/sda --ioscheduler=none --gtod_reduce=1 \ --norandommap --hipri=$hipri done Link: https://lore.kernel.org/r/20211203231950.193369-18-bvanassche@acm.orgTested-by:Bean Huo <beanhuo@micron.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Bart Van Assche authored
Remove the clock scaling lock from ufshcd_queuecommand() since it is a performance bottleneck. Instead check the SCSI device budget bitmaps in the code that waits for ongoing ufshcd_queuecommand() calls. A bit is set in sdev->budget_map just before scsi_queue_rq() is called and a bit is cleared from that bitmap if scsi_queue_rq() does not submit the request or after the request has finished. See also the blk_mq_{get,put}_dispatch_budget() calls in the block layer. There is no risk for a livelock since the block layer delays queue reruns if queueing a request fails because the SCSI host has been blocked. Link: https://lore.kernel.org/r/20211203231950.193369-17-bvanassche@acm.org Cc: Asutosh Das (asd) <asutoshd@codeaurora.org> Reviewed-by:Asutosh Das <asutoshd@codeaurora.org> Signed-off-by:
-
Bart Van Assche authored
Instead of locking and unlocking the clock scaling lock, surround the command queueing code with an RCU reader lock and call synchronize_rcu(). This patch prepares for removal of the clock scaling lock. Link: https://lore.kernel.org/r/20211203231950.193369-16-bvanassche@acm.orgTested-by:
Adrian Hunter <adrian.hunter@intel.com> Reviewed-by:
-
Bart Van Assche authored
Fix the following kernel crash: Unable to handle kernel paging request at virtual address ffffffc91e735000 Call trace: __queue_work+0x26c/0x624 queue_work_on+0x6c/0xf0 ufshcd_hold+0x12c/0x210 __ufshcd_wl_suspend+0xc0/0x400 ufshcd_wl_shutdown+0xb8/0xcc device_shutdown+0x184/0x224 kernel_restart+0x4c/0x124 __arm64_sys_reboot+0x194/0x264 el0_svc_common+0xc8/0x1d4 do_el0_svc+0x30/0x8c el0_svc+0x20/0x30 el0_sync_handler+0x84/0xe4 el0_sync+0x1bc/0x1c0 Fix this crash by ungating the clock before destroying the work queue on which clock gating work is queued. Link: https://lore.kernel.org/r/20211203231950.193369-15-bvanassche@acm.orgTested-by:
-
Bart Van Assche authored
Release resources when aborting a command. Make sure that aborted commands are completed once by clearing the corresponding tag bit from hba->outstanding_reqs. This patch is an improved version of commit 3ff1f6b6 ("scsi: ufs: core: Improve SCSI abort handling"). Link: https://lore.kernel.org/r/20211203231950.193369-14-bvanassche@acm.org Fixes: 7a3e97b0 ("[SCSI] ufshcd: UFS Host controller driver") Tested-by:
-
Bart Van Assche authored
The only functional change in this patch is that scsi_done() is now called after ufshcd_release() and ufshcd_clk_scaling_update_busy() instead of before. The next patch in this series will introduce a call to ufshcd_release_scsi_cmd() in the abort handler. Link: https://lore.kernel.org/r/20211203231950.193369-13-bvanassche@acm.orgTested-by:
-
Bart Van Assche authored
This patch does not change any functionality but makes the next patch in this series easier to read. Link: https://lore.kernel.org/r/20211203231950.193369-12-bvanassche@acm.orgTested-by:
-
Bart Van Assche authored
The previous patch removed all code that uses hba->cmd_queue. Hence also remove hba->cmd_queue itself. Link: https://lore.kernel.org/r/20211203231950.193369-11-bvanassche@acm.orgSuggested-by:
-
Bart Van Assche authored
The following deadlock has been observed on a test setup: - All tags allocated - The SCSI error handler calls ufshcd_eh_host_reset_handler() - ufshcd_eh_host_reset_handler() queues work that calls ufshcd_err_handler() - ufshcd_err_handler() locks up as follows: Workqueue: ufs_eh_wq_0 ufshcd_err_handler.cfi_jt Call trace: __switch_to+0x298/0x5d8 __schedule+0x6cc/0xa94 schedule+0x12c/0x298 blk_mq_get_tag+0x210/0x480 __blk_mq_alloc_request+0x1c8/0x284 blk_get_request+0x74/0x134 ufshcd_exec_dev_cmd+0x68/0x640 ufshcd_verify_dev_init+0x68/0x35c ufshcd_probe_hba+0x12c/0x1cb8 ufshcd_host_reset_and_restore+0x88/0x254 ufshcd_reset_and_restore+0xd0/0x354 ufshcd_err_handler+0x408/0xc58 process_one_work+0x24c/0x66c worker_thread+0x3e8/0xa4c kthread+0x150/0x1b4 ret_from_fork+0x10/0x30 Fix this lockup by making ufshcd_exec_dev_cmd() allocate a reserved request. Link: https://lore.kernel.org/r/20211203231950.193369-10-bvanassche@acm.orgTested-by:
-
Bart Van Assche authored
Prepare for making sdev->host->can_queue less than hba->nutrs. This patch does not change any functionality. Link: https://lore.kernel.org/r/20211203231950.193369-9-bvanassche@acm.orgTested-by:
-
Bart Van Assche authored
Use hba->outstanding_reqs instead of ufshcd_any_tag_in_use(). This patch prepares for removal of the blk_mq_start_request() call from ufshcd_wait_for_dev_cmd(). blk_mq_tagset_busy_iter() only iterates over started requests. Link: https://lore.kernel.org/r/20211203231950.193369-8-bvanassche@acm.orgTested-by:
-
Bart Van Assche authored
The driver data pointer must be set before any callbacks are registered that use that pointer. Hence move the initialization of that pointer from after the ufshcd_init() call to inside ufshcd_init(). Link: https://lore.kernel.org/r/20211203231950.193369-7-bvanassche@acm.org Fixes: 3b1d0580 ("[SCSI] ufs: Segregate PCI Specific Code") Reported-by:
Alexey Dobriyan <adobriyan@gmail.com> Tested-by:
-
Bart Van Assche authored
Commit 7252a360 ("scsi: ufs: Avoid busy-waiting by eliminating tag conflicts") guarantees that 'tag' is not in use by any SCSI command. Remove the check that returns early if a conflict occurs. Link: https://lore.kernel.org/r/20211203231950.193369-6-bvanassche@acm.orgTested-by:
Avri Altman <avri.altman@wdc.com> Signed-off-by:
-
Bart Van Assche authored
Since the sdev_rpmb member of struct ufs_hba is only used inside ufshcd_scsi_add_wlus(), convert it into a local variable. Link: https://lore.kernel.org/r/20211203231950.193369-5-bvanassche@acm.orgSuggested-by:
Jaegeuk Kim <jaegeuk@kernel.org> Tested-by:
Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by:
-
Bart Van Assche authored
Commit edc0596c ("scsi: ufs: core: Stop clearing UNIT ATTENTIONS") removed all callers of is_rpmb_wlun(). Hence also remove the function itself. Link: https://lore.kernel.org/r/20211203231950.193369-4-bvanassche@acm.orgReported-by:
kernel test robot <lkp@intel.com> Tested-by:
-
Bart Van Assche authored
The new name makes it clear what the meaning of the function argument is. Link: https://lore.kernel.org/r/20211203231950.193369-3-bvanassche@acm.orgTested-by:
Chanho Park <chanho61.park@samsung.com> Reviewed-by:
Keoseong Park <keosung.park@samsung.com> Reviewed-by:
-
Bart Van Assche authored
The comment above scsi_device_max_queue_depth() and also the description of commit ca445321 ("scsi: core: Make sure sdev->queue_depth is <= max(shost->can_queue, 1024)") contradict the implementation of the function scsi_device_max_queue_depth(). Additionally, the maximum queue depth of a SCSI LUN never exceeds host->can_queue. Fix scsi_device_max_queue_depth() by changing max_t() into min_t(). Link: https://lore.kernel.org/r/20211203231950.193369-2-bvanassche@acm.org Fixes: ca445321 ("scsi: core: Make sure sdev->queue_depth is <= max(shost->can_queue, 1024)") Cc: Hannes Reinecke <hare@suse.de> Cc: Sumanesh Samanta <sumanesh.samanta@broadcom.com> Tested-by:
Ming Lei <ming.lei@redhat.com> Reviewed-by:
-
Colin Ian King authored
Variable r is being assigned a value that is never read. The assignment is redundant and so is the variable, so remove these. Remove unnecessary the {} braces in the if statement too. Link: https://lore.kernel.org/r/20211205225901.54362-1-colin.i.king@gmail.comSigned-off-by:Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
-
Sebastian Andrzej Siewior authored
The email addresses of Subbu Seetharaman <subbu.seetharaman@broadcom.com> Jitendra Bhivare <jitendra.bhivare@broadcom.com> are no longer working. Remove Subbu and Jitendra as maintainers. Link: https://lore.kernel.org/r/20211202201141.cytqe73ish6oa356@linutronix.deSigned-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Florian Fainelli authored
qedi formats SYSFS_FLAG_FW_SEL_BOOT as a byte and the qla4xxx driver does exactly the same thing. Align them for consistency. Link: https://lore.kernel.org/r/20211130203813.12138-3-f.fainelli@gmail.comSuggested-by:
Manish Rangankar <mrangankar@marvell.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
The format used for formatting SYSFS_FLAG_FW_SEL_BOOT creates the following warning: drivers/scsi/qedi/qedi_main.c:2259:35: warning: format specifies type 'char' but the argument has type 'int' [-Wformat] rc = snprintf(buf, 3, "%hhd\n", SYSFS_FLAG_FW_SEL_BOOT); Fix this to cast the constant as a char since the intention is to print it via sysfs as a byte. Link: https://lore.kernel.org/r/20211130203813.12138-2-f.fainelli@gmail.comReported-by: -
Christophe JAILLET authored
All uses of the 'hisi_hba->slot_index_tags' bitmap are protected with the 'hisi_hba->lock' spinlock. Prefer the non-atomic '__[set|clear]_bit()' functions to save a few cycles. Link: https://lore.kernel.org/r/8ee33e463523db080e6a2c06f332e47abb69359b.1637961191.git.christophe.jaillet@wanadoo.frAcked-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Christophe JAILLET authored
The 'hisi_hba->slot_index_tags' bitmap is allocated with bitmap_zalloc() so it is already cleared. There is no need to clear it another time, one bit at a time. Remove the corresponding useless code. Link: https://lore.kernel.org/r/41c86e7e3e05a13bd586d8ee1b81296140b7a6eb.1637961191.git.christophe.jaillet@wanadoo.frAcked-by:
-
Christophe JAILLET authored
'hisi_hba->slot_index_tags' is a bitmap. Use 'devm_bitmap_zalloc()' to simplify code, improve the semantic, and avoid some open-coded arithmetic in allocator arguments. Link: https://lore.kernel.org/r/4afa3f71e66c941c660627c7f5b0223b51968ebb.1637961191.git.christophe.jaillet@wanadoo.frAcked-by:
-
- 03 Dec, 2021 2 commits
-
-
Niklas Cassel authored
Make sd_zbc_parse_report() use if/else when setting the write pointer, instead of setting it unconditionally and then conditionally updating it. Link: https://lore.kernel.org/r/20211201142821.64650-2-Niklas.Cassel@wdc.comReviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by:
-
Niklas Cassel authored
According to the ZBC (and ZAC) specification, a zone that has Zone Type set to Conventional, must also have its Zone Condition set to "Not Write Pointer". Therefore, a conventional zone will never have Zone Condition set to "Full", which means that we can omit the non-conventional prerequisite from the zone full condition check. Link: https://lore.kernel.org/r/20211201142821.64650-1-Niklas.Cassel@wdc.comSuggested-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by:
-
- 30 Nov, 2021 4 commits
-
-
Bart Van Assche authored
Remove this include directive from code that does not use any functionality from kernel/async.c. Link: https://lore.kernel.org/r/20211129194609.3466071-13-bvanassche@acm.orgReviewed-by:
Daejun Park <daejun7.park@samsung.com> Signed-off-by:
-
Bart Van Assche authored
Fix the following kernel-doc warning: drivers/scsi/pmcraid.c:3317: warning: Excess function parameter 'done' description in 'pmcraid_queuecommand_lck' Link: https://lore.kernel.org/r/20211129194609.3466071-12-bvanassche@acm.org Fixes: af049dfd ("scsi: core: Remove the 'done' argument from SCSI queuecommand_lck functions") Signed-off-by:
-
Bart Van Assche authored
Fix the following kernel-doc warnings: drivers/scsi/pm8001/pm8001_ctl.c:900: warning: cannot understand function prototype: 'const char *const mpiStateText[] = ' drivers/scsi/pm8001/pm8001_ctl.c:930: warning: Function parameter or member 'attr' not described in 'ctl_hmi_error_show' drivers/scsi/pm8001/pm8001_ctl.c:951: warning: Function parameter or member 'attr' not described in 'ctl_raae_count_show' drivers/scsi/pm8001/pm8001_ctl.c:972: warning: Function parameter or member 'attr' not described in 'ctl_iop0_count_show' drivers/scsi/pm8001/pm8001_ctl.c:993: warning: Function parameter or member 'attr' not described in 'ctl_iop1_count_show' Link: https://lore.kernel.org/r/20211129194609.3466071-11-bvanassche@acm.org Fixes: 4ddbea1b ("scsi: pm80xx: Add sysfs attribute to check MPI state") Acked-by:
Jack Wang <jinpu.wang@ionos.com> Signed-off-by:
-
Bart Van Assche authored
Fix the following kernel-doc warning: drivers/scsi/megaraid/megaraid_mbox.c:1439: warning: Excess function parameter 'done' description in 'megaraid_queue_command_lck' Link: https://lore.kernel.org/r/20211129194609.3466071-10-bvanassche@acm.org Fixes: af049dfd ("scsi: core: Remove the 'done' argument from SCSI queuecommand_lck functions") Signed-off-by:
-
