Skip to content

L
linux
Switch branch/tag
  1. 20 Jan, 2021 16 commits
  3. 19 Jan, 2021 14 commits
    • Tariq Toukan's avatar
      net: Disable NETIF_F_HW_TLS_RX when RXCSUM is disabled · a3eb4e9d
      Tariq Toukan authored 
      With NETIF_F_HW_TLS_RX packets are decrypted in HW. This cannot be
logically done when RXCSUM offload is off.

Fixes: 14136564 ("net: Add TLS RX offload feature")
Signed-off-by: default avatarTariq Toukan <tariqt@nvidia.com>
Reviewed-by: default avatarBoris Pismenny <borisp@nvidia.com>
Link: https://lore.kernel.org/r/20210117151538.9411-1-tariqt@nvidia.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      a3eb4e9d
    • Jakub Kicinski's avatar
      Merge branch 'ipv4-ensure-ecn-bits-don-t-influence-source-address-validation' · 2565ff4e
      Jakub Kicinski authored 
      Guillaume Nault says:

====================
ipv4: Ensure ECN bits don't influence source address validation

Functions that end up calling fib_table_lookup() should clear the ECN
bits from the TOS, otherwise ECT(0) and ECT(1) packets can be treated
differently.

Most functions already clear the ECN bits, but there are a few cases
where this is not done. This series only fixes the ones related to
source address validation.
====================

Link: https://lore.kernel.org/r/cover.1610790904.git.gnault@redhat.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      2565ff4e
    • Guillaume Nault's avatar
      netfilter: rpfilter: mask ecn bits before fib lookup · 2e5a6266
      Guillaume Nault authored 
      RT_TOS() only masks one of the two ECN bits. Therefore rpfilter_mt()
treats Not-ECT or ECT(1) packets in a different way than those with
ECT(0) or CE.

Reproducer:

  Create two netns, connected with a veth:
  $ ip netns add ns0
  $ ip netns add ns1
  $ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1
  $ ip -netns ns0 link set dev veth01 up
  $ ip -netns ns1 link set dev veth10 up
  $ ip -netns ns0 address add 192.0.2.10/32 dev veth01
  $ ip -netns ns1 address add 192.0.2.11/32 dev veth10

  Add a route to ns1 in ns0:
  $ ip -netns ns0 route add 192.0.2.11/32 dev veth01

  In ns1, only packets with TOS 4 can be routed to ns0:
  $ ip -netns ns1 route add 192.0.2.10/32 tos 4 dev veth10

  Ping from ns0 to ns1 works regardless of the ECN bits, as long as TOS
  is 4:
  $ ip netns exec ns0 ping -Q 4 192.0.2.11   # TOS 4, Not-ECT
    ... 0% packet loss ...
  $ ip netns exec ns0 ping -Q 5 192.0.2.11   # TOS 4, ECT(1)
    ... 0% packet loss ...
  $ ip netns exec ns0 ping -Q 6 192.0.2.11   # TOS 4, ECT(0)
    ... 0% packet loss ...
  $ ip netns exec ns0 ping -Q 7 192.0.2.11   # TOS 4, CE
    ... 0% packet loss ...

  Now use iptable's rpfilter module in ns1:
  $ ip netns exec ns1 iptables-legacy -t raw -A PREROUTING -m rpfilter --invert -j DROP

  Not-ECT and ECT(1) packets still pass:
  $ ip netns exec ns0 ping -Q 4 192.0.2.11   # TOS 4, Not-ECT
    ... 0% packet loss ...
  $ ip netns exec ns0 ping -Q 5 192.0.2.11   # TOS 4, ECT(1)
    ... 0% packet loss ...

  But ECT(0) and ECN packets are dropped:
  $ ip netns exec ns0 ping -Q 6 192.0.2.11   # TOS 4, ECT(0)
    ... 100% packet loss ...
  $ ip netns exec ns0 ping -Q 7 192.0.2.11   # TOS 4, CE
    ... 100% packet loss ...

After this patch, rpfilter doesn't drop ECT(0) and CE packets anymore.

Fixes: 8f97339d ("netfilter: add ipv4 reverse path filter match")
Signed-off-by: default avatarGuillaume Nault <gnault@redhat.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      2e5a6266
    • Guillaume Nault's avatar
      udp: mask TOS bits in udp_v4_early_demux() · 8d2b51b0
      Guillaume Nault authored 
      udp_v4_early_demux() is the only function that calls
ip_mc_validate_source() with a TOS that hasn't been masked with
IPTOS_RT_MASK.

This results in different behaviours for incoming multicast UDPv4
packets, depending on if ip_mc_validate_source() is called from the
early-demux path (udp_v4_early_demux) or from the regular input path
(ip_route_input_noref).

ECN would normally not be used with UDP multicast packets, so the
practical consequences should be limited on that side. However,
IPTOS_RT_MASK is used to also masks the TOS' high order bits, to align
with the non-early-demux path behaviour.

Reproducer:

  Setup two netns, connected with veth:
  $ ip netns add ns0
  $ ip netns add ns1
  $ ip -netns ns0 link set dev lo up
  $ ip -netns ns1 link set dev lo up
  $ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1
  $ ip -netns ns0 link set dev veth01 up
  $ ip -netns ns1 link set dev veth10 up
  $ ip -netns ns0 address add 192.0.2.10 peer 192.0.2.11/32 dev veth01
  $ ip -netns ns1 address add 192.0.2.11 peer 192.0.2.10/32 dev veth10

  In ns0, add route to multicast address 224.0.2.0/24 using source
  address 198.51.100.10:
  $ ip -netns ns0 address add 198.51.100.10/32 dev lo
  $ ip -netns ns0 route add 224.0.2.0/24 dev veth01 src 198.51.100.10

  In ns1, define route to 198.51.100.10, only for packets with TOS 4:
  $ ip -netns ns1 route add 198.51.100.10/32 tos 4 dev veth10

  Also activate rp_filter in ns1, so that incoming packets not matching
  the above route get dropped:
  $ ip netns exec ns1 sysctl -wq net.ipv4.conf.veth10.rp_filter=1

  Now try to receive packets on 224.0.2.11:
  $ ip netns exec ns1 socat UDP-RECVFROM:1111,ip-add-membership=224.0.2.11:veth10,ignoreeof -

  In ns0, send packet to 224.0.2.11 with TOS 4 and ECT(0) (that is,
  tos 6 for socat):
  $ echo test0 | ip netns exec ns0 socat - UDP-DATAGRAM:224.0.2.11:1111,bind=:1111,tos=6

  The "test0" message is properly received by socat in ns1, because
  early-demux has no cached dst to use, so source address validation
  is done by ip_route_input_mc(), which receives a TOS that has the
  ECN bits masked.

  Now send another packet to 224.0.2.11, still with TOS 4 and ECT(0):
  $ echo test1 | ip netns exec ns0 socat - UDP-DATAGRAM:224.0.2.11:1111,bind=:1111,tos=6

  The "test1" message isn't received by socat in ns1, because, now,
  early-demux has a cached dst to use and calls ip_mc_validate_source()
  immediately, without masking the ECN bits.

Fixes: bc044e8d ("udp: perform source validation for mcast early demux")
Signed-off-by: default avatarGuillaume Nault <gnault@redhat.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      8d2b51b0
    • Maxim Mikityanskiy's avatar
      xsk: Clear pool even for inactive queues · b425e24a
      Maxim Mikityanskiy authored 
      The number of queues can change by other means, rather than ethtool. For
example, attaching an mqprio qdisc with num_tc > 1 leads to creating
multiple sets of TX queues, which may be then destroyed when mqprio is
deleted. If an AF_XDP socket is created while mqprio is active,
dev->_tx[queue_id].pool will be filled, but then real_num_tx_queues may
decrease with deletion of mqprio, which will mean that the pool won't be
NULLed, and a further increase of the number of TX queues may expose a
dangling pointer.

To avoid any potential misbehavior, this commit clears pool for RX and
TX queues, regardless of real_num_*_queues, still taking into
consideration num_*_queues to avoid overflows.

Fixes: 1c1efc2a ("xsk: Create and free buffer pool independently from umem")
Fixes: a41b4f3c ("xsk: simplify xdp_clear_umem_at_qid implementation")
Signed-off-by: default avatarMaxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarBjörn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/20210118160333.333439-1-maximmi@mellanox.com
      b425e24a
    • Mircea Cirjaliu's avatar
      bpf: Fix helper bpf_map_peek_elem_proto pointing to wrong callback · 301a33d5
      Mircea Cirjaliu authored 
      I assume this was obtained by copy/paste. Point it to bpf_map_peek_elem()
instead of bpf_map_pop_elem(). In practice it may have been less likely
hit when under JIT given shielded via 84430d42 ("bpf, verifier: avoid
retpoline for map push/pop/peek operation").

Fixes: f1a2e44a ("bpf: add queue and stack maps")
Signed-off-by: default avatarMircea Cirjaliu <mcirjaliu@bitdefender.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Cc: Mauricio Vasquez <mauriciovasquezbernal@gmail.com>
Link: https://lore.kernel.org/bpf/AM7PR02MB6082663DFDCCE8DA7A6DD6B1BBA30@AM7PR02MB6082.eurprd02.prod.outlook.com
      301a33d5
    • Jakub Kicinski's avatar
      Merge branch 'sh_eth-fix-reboot-crash' · f7b9820d
      Jakub Kicinski authored 
      Geert Uytterhoeven says:

====================
sh_eth: Fix reboot crash

This patch fixes a regression v5.11-rc1, where rebooting while a sh_eth
device is not opened will cause a crash.

Changes compared to v1:
  - Export mdiobb_{read,write}(),
  - Call mdiobb_{read,write}() now they are exported,
  - Use mii_bus.parent to avoid bb_info.dev copy,
  - Drop RFC state.

Alternatively, mdio-bitbang could provide Runtime PM-aware wrappers
itself, and use them either manually (through a new parameter to
alloc_mdio_bitbang(), or a new alloc_mdio_bitbang_*() function), or
automatically (e.g. if pm_runtime_enabled() returns true).  Note that
the latter requires a "struct device *" parameter to operate on.
Currently there are only two drivers that call alloc_mdio_bitbang() and
use Runtime PM: the Renesas sh_eth and ravb drivers.  This series fixes
the former, while the latter is not affected (it keeps the device
powered all the time between driver probe and driver unbind, and
changing that seems to be non-trivial).
====================

Link: https://lore.kernel.org/r/20210118150656.796584-1-geert+renesas@glider.beSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      f7b9820d
    • Geert Uytterhoeven's avatar
      sh_eth: Make PHY access aware of Runtime PM to fix reboot crash · 02cae02a
      Geert Uytterhoeven authored 
      Wolfram reports that his R-Car H2-based Lager board can no longer be
rebooted in v5.11-rc1, as it crashes with an imprecise external abort.
The issue can be reproduced on other boards (e.g. Koelsch with R-Car
M2-W) too, if CONFIG_IP_PNP is disabled, and the Ethernet interface is
down at reboot time:

    Unhandled fault: imprecise external abort (0x1406) at 0x00000000
    pgd = (ptrval)
    [00000000] *pgd=422b6835, *pte=00000000, *ppte=00000000
    Internal error: : 1406 [#1] ARM
    Modules linked in:
    CPU: 0 PID: 1105 Comm: init Tainted: G        W         5.10.0-rc1-00402-ge2f016cf #1048
    Hardware name: Generic R-Car Gen2 (Flattened Device Tree)
    PC is at sh_mdio_ctrl+0x44/0x60
    LR is at sh_mmd_ctrl+0x20/0x24
    ...
    Backtrace:
    [<c0451f30>] (sh_mdio_ctrl) from [<c0451fd4>] (sh_mmd_ctrl+0x20/0x24)
     r7:0000001f r6:00000020 r5:00000002 r4:c22a1dc4
    [<c0451fb4>] (sh_mmd_ctrl) from [<c044fc18>] (mdiobb_cmd+0x38/0xa8)
    [<c044fbe0>] (mdiobb_cmd) from [<c044feb8>] (mdiobb_read+0x58/0xdc)
     r9:c229f844 r8:c0c329dc r7:c221e000 r6:00000001 r5:c22a1dc4 r4:00000001
    [<c044fe60>] (mdiobb_read) from [<c044c854>] (__mdiobus_read+0x74/0xe0)
     r7:0000001f r6:00000001 r5:c221e000 r4:c221e000
    [<c044c7e0>] (__mdiobus_read) from [<c044c9d8>] (mdiobus_read+0x40/0x54)
     r7:0000001f r6:00000001 r5:c221e000 r4:c221e458
    [<c044c998>] (mdiobus_read) from [<c044d678>] (phy_read+0x1c/0x20)
     r7:ffffe000 r6:c221e470 r5:00000200 r4:c229f800
    [<c044d65c>] (phy_read) from [<c044d94c>] (kszphy_config_intr+0x44/0x80)
    [<c044d908>] (kszphy_config_intr) from [<c044694c>] (phy_disable_interrupts+0x44/0x50)
     r5:c229f800 r4:c229f800
    [<c0446908>] (phy_disable_interrupts) from [<c0449370>] (phy_shutdown+0x18/0x1c)
     r5:c229f800 r4:c229f804
    [<c0449358>] (phy_shutdown) from [<c040066c>] (device_shutdown+0x168/0x1f8)
    [<c0400504>] (device_shutdown) from [<c013de44>] (kernel_restart_prepare+0x3c/0x48)
     r9:c22d2000 r8:c0100264 r7:c0b0d034 r6:00000000 r5:4321fedc r4:00000000
    [<c013de08>] (kernel_restart_prepare) from [<c013dee0>] (kernel_restart+0x1c/0x60)
    [<c013dec4>] (kernel_restart) from [<c013e1d8>] (__do_sys_reboot+0x168/0x208)
     r5:4321fedc r4:01234567
    [<c013e070>] (__do_sys_reboot) from [<c013e2e8>] (sys_reboot+0x18/0x1c)
     r7:00000058 r6:00000000 r5:00000000 r4:00000000
    [<c013e2d0>] (sys_reboot) from [<c0100060>] (ret_fast_syscall+0x0/0x54)

As of commit e2f016cf ("net: phy: add a shutdown procedure"),
system reboot calls phy_disable_interrupts() during shutdown.  As this
happens unconditionally, the PHY registers may be accessed while the
device is suspended, causing undefined behavior, which may crash the
system.

Fix this by wrapping the PHY bitbang accessors in the sh_eth driver by
wrappers that take care of Runtime PM, to resume the device when needed.
Reported-by: default avatarWolfram Sang <wsa+renesas@sang-engineering.com>
Suggested-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Tested-by: default avatarWolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      02cae02a
    • Geert Uytterhoeven's avatar
      mdio-bitbang: Export mdiobb_{read,write}() · 8eed01b5
      Geert Uytterhoeven authored 
      Export mdiobb_read() and mdiobb_write(), so Ethernet controller drivers
can call them from their MDIO read/write wrappers.
Signed-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Tested-by: default avatarWolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      8eed01b5
    • Oleksandr Mazur's avatar
      net: core: devlink: use right genl user_ptr when handling port param get/set · 7e238de8
      Oleksandr Mazur authored 
      Fix incorrect user_ptr dereferencing when handling port param get/set:

    idx [0] stores the 'struct devlink' pointer;
    idx [1] stores the 'struct devlink_port' pointer;

Fixes: 637989b5 ("devlink: Always use user_ptr[0] for devlink and simplify post_doit")
CC: Parav Pandit <parav@mellanox.com>
Signed-off-by: default avatarOleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: default avatarVadym Kochan <vadym.kochan@plvision.eu>
Link: https://lore.kernel.org/r/20210119085333.16833-1-vadym.kochan@plvision.euSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      7e238de8
    • Enke Chen's avatar
      tcp: fix TCP_USER_TIMEOUT with zero window · 9d9b1ee0
      Enke Chen authored 
      The TCP session does not terminate with TCP_USER_TIMEOUT when data
remain untransmitted due to zero window.

The number of unanswered zero-window probes (tcp_probes_out) is
reset to zero with incoming acks irrespective of the window size,
as described in tcp_probe_timer():

    RFC 1122 4.2.2.17 requires the sender to stay open indefinitely
    as long as the receiver continues to respond probes. We support
    this by default and reset icsk_probes_out with incoming ACKs.

This counter, however, is the wrong one to be used in calculating the
duration that the window remains closed and data remain untransmitted.
Thanks to Jonathan Maxwell <jmaxwell37@gmail.com> for diagnosing the
actual issue.

In this patch a new timestamp is introduced for the socket in order to
track the elapsed time for the zero-window probes that have not been
answered with any non-zero window ack.

Fixes: 9721e709 ("tcp: simplify window probe aborting on USER_TIMEOUT")
Reported-by: default avatarWilliam McCall <william.mccall@gmail.com>
Co-developed-by: default avatarNeal Cardwell <ncardwell@google.com>
Signed-off-by: default avatarNeal Cardwell <ncardwell@google.com>
Signed-off-by: default avatarEnke Chen <enchen@paloaltonetworks.com>
Reviewed-by: default avatarYuchung Cheng <ycheng@google.com>
Reviewed-by: default avatarEric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210115223058.GA39267@localhost.localdomainSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      9d9b1ee0
    • Jakub Kicinski's avatar
      Merge branch 'ipv6-fixes-for-the-multicast-routes' · b889c7c8
      Jakub Kicinski authored 
      Matteo Croce says:

====================
ipv6: fixes for the multicast routes

Fix two wrong flags in the IPv6 multicast routes created
by the autoconf code.
====================

Link: https://lore.kernel.org/r/20210115184209.78611-1-mcroce@linux.microsoft.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      b889c7c8
    • Matteo Croce's avatar
      ipv6: set multicast flag on the multicast route · ceed9038
      Matteo Croce authored 
      The multicast route ff00::/8 is created with type RTN_UNICAST:

  $ ip -6 -d route
  unicast ::1 dev lo proto kernel scope global metric 256 pref medium
  unicast fe80::/64 dev eth0 proto kernel scope global metric 256 pref medium
  unicast ff00::/8 dev eth0 proto kernel scope global metric 256 pref medium

Set the type to RTN_MULTICAST which is more appropriate.

Fixes: e8478e80 ("net/ipv6: Save route type in rt6_info")
Signed-off-by: default avatarMatteo Croce <mcroce@microsoft.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      ceed9038
    • Matteo Croce's avatar
      ipv6: create multicast route with RTPROT_KERNEL · a826b043
      Matteo Croce authored 
      The ff00::/8 multicast route is created without specifying the fc_protocol
field, so the default RTPROT_BOOT value is used:

  $ ip -6 -d route
  unicast ::1 dev lo proto kernel scope global metric 256 pref medium
  unicast fe80::/64 dev eth0 proto kernel scope global metric 256 pref medium
  unicast ff00::/8 dev eth0 proto boot scope global metric 256 pref medium

As the documentation says, this value identifies routes installed during
boot, but the route is created when interface is set up.
Change the value to RTPROT_KERNEL which is a better value.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: default avatarMatteo Croce <mcroce@microsoft.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      a826b043
  5. 18 Jan, 2021 3 commits
  7. 17 Jan, 2021 1 commit
  9. 16 Jan, 2021 4 commits
    • Eric Dumazet's avatar
      net_sched: avoid shift-out-of-bounds in tcindex_set_parms() · bcd0cf19
      Eric Dumazet authored 
      tc_index being 16bit wide, we need to check that TCA_TCINDEX_SHIFT
attribute is not silly.

UBSAN: shift-out-of-bounds in net/sched/cls_tcindex.c:260:29
shift exponent 255 is too large for 32-bit type 'int'
CPU: 0 PID: 8516 Comm: syz-executor228 Not tainted 5.10.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x107/0x163 lib/dump_stack.c:120
 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:395
 valid_perfect_hash net/sched/cls_tcindex.c:260 [inline]
 tcindex_set_parms.cold+0x1b/0x215 net/sched/cls_tcindex.c:425
 tcindex_change+0x232/0x340 net/sched/cls_tcindex.c:546
 tc_new_tfilter+0x13fb/0x21b0 net/sched/cls_api.c:2127
 rtnetlink_rcv_msg+0x8b6/0xb80 net/core/rtnetlink.c:5555
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494
 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
 netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1330
 netlink_sendmsg+0x907/0xe40 net/netlink/af_netlink.c:1919
 sock_sendmsg_nosec net/socket.c:652 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:672
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2336
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2390
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2423
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Reported-by: default avatarsyzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20210114185229.1742255-1-eric.dumazet@gmail.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      bcd0cf19
    • Eric Dumazet's avatar
      net_sched: gen_estimator: support large ewma log · dd5e0733
      Eric Dumazet authored 
      syzbot report reminded us that very big ewma_log were supported in the past,
even if they made litle sense.

tc qdisc replace dev xxx root est 1sec 131072sec ...

While fixing the bug, also add boundary checks for ewma_log, in line
with range supported by iproute2.

UBSAN: shift-out-of-bounds in net/core/gen_estimator.c:83:38
shift exponent -1 is negative
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x107/0x163 lib/dump_stack.c:120
 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:395
 est_timer.cold+0xbb/0x12d net/core/gen_estimator.c:83
 call_timer_fn+0x1a5/0x710 kernel/time/timer.c:1417
 expire_timers kernel/time/timer.c:1462 [inline]
 __run_timers.part.0+0x692/0xa80 kernel/time/timer.c:1731
 __run_timers kernel/time/timer.c:1712 [inline]
 run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1744
 __do_softirq+0x2bc/0xa77 kernel/softirq.c:343
 asm_call_irq_on_stack+0xf/0x20
 </IRQ>
 __run_on_irqstack arch/x86/include/asm/irq_stack.h:26 [inline]
 run_on_irqstack_cond arch/x86/include/asm/irq_stack.h:77 [inline]
 do_softirq_own_stack+0xaa/0xd0 arch/x86/kernel/irq_64.c:77
 invoke_softirq kernel/softirq.c:226 [inline]
 __irq_exit_rcu+0x17f/0x200 kernel/softirq.c:420
 irq_exit_rcu+0x5/0x20 kernel/softirq.c:432
 sysvec_apic_timer_interrupt+0x4d/0x100 arch/x86/kernel/apic/apic.c:1096
 asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:628
RIP: 0010:native_save_fl arch/x86/include/asm/irqflags.h:29 [inline]
RIP: 0010:arch_local_save_flags arch/x86/include/asm/irqflags.h:79 [inline]
RIP: 0010:arch_irqs_disabled arch/x86/include/asm/irqflags.h:169 [inline]
RIP: 0010:acpi_safe_halt drivers/acpi/processor_idle.c:111 [inline]
RIP: 0010:acpi_idle_do_entry+0x1c9/0x250 drivers/acpi/processor_idle.c:516

Fixes: 1c0d32fd ("net_sched: gen_estimator: complete rewrite of rate estimators")
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Reported-by: default avatarsyzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20210114181929.1717985-1-eric.dumazet@gmail.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      dd5e0733
    • Eric Dumazet's avatar
      net_sched: reject silly cell_log in qdisc_get_rtab() · e4bedf48
      Eric Dumazet authored 
      iproute2 probably never goes beyond 8 for the cell exponent,
but stick to the max shift exponent for signed 32bit.

UBSAN reported:
UBSAN: shift-out-of-bounds in net/sched/sch_api.c:389:22
shift exponent 130 is too large for 32-bit type 'int'
CPU: 1 PID: 8450 Comm: syz-executor586 Not tainted 5.11.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x183/0x22e lib/dump_stack.c:120
 ubsan_epilogue lib/ubsan.c:148 [inline]
 __ubsan_handle_shift_out_of_bounds+0x432/0x4d0 lib/ubsan.c:395
 __detect_linklayer+0x2a9/0x330 net/sched/sch_api.c:389
 qdisc_get_rtab+0x2b5/0x410 net/sched/sch_api.c:435
 cbq_init+0x28f/0x12c0 net/sched/sch_cbq.c:1180
 qdisc_create+0x801/0x1470 net/sched/sch_api.c:1246
 tc_modify_qdisc+0x9e3/0x1fc0 net/sched/sch_api.c:1662
 rtnetlink_rcv_msg+0xb1d/0xe60 net/core/rtnetlink.c:5564
 netlink_rcv_skb+0x1f0/0x460 net/netlink/af_netlink.c:2494
 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
 netlink_unicast+0x7de/0x9b0 net/netlink/af_netlink.c:1330
 netlink_sendmsg+0xaa6/0xe90 net/netlink/af_netlink.c:1919
 sock_sendmsg_nosec net/socket.c:652 [inline]
 sock_sendmsg net/socket.c:672 [inline]
 ____sys_sendmsg+0x5a2/0x900 net/socket.c:2345
 ___sys_sendmsg net/socket.c:2399 [inline]
 __sys_sendmsg+0x319/0x400 net/socket.c:2432
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Reported-by: default avatarsyzbot <syzkaller@googlegroups.com>
Acked-by: default avatarCong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/20210114160637.1660597-1-eric.dumazet@gmail.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      e4bedf48
    • Jakub Kicinski's avatar
      Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf · e23a8d00
      Jakub Kicinski authored 
      Daniel Borkmann says:

====================
pull-request: bpf 2021-01-16

1) Fix a double bpf_prog_put() for BPF_PROG_{TYPE_EXT,TYPE_TRACING} types in
   link creation's error path causing a refcount underflow, from Jiri Olsa.

2) Fix BTF validation errors for the case where kernel modules don't declare
   any new types and end up with an empty BTF, from Andrii Nakryiko.

3) Fix BPF local storage helpers to first check their {task,inode} owners for
   being NULL before access, from KP Singh.

4) Fix a memory leak in BPF setsockopt handling for the case where optlen is
   zero and thus temporary optval buffer should be freed, from Stanislav Fomichev.

5) Fix a syzbot memory allocation splat in BPF_PROG_TEST_RUN infra for
   raw_tracepoint caused by too big ctx_size_in, from Song Liu.

6) Fix LLVM code generation issues with verifier where PTR_TO_MEM{,_OR_NULL}
   registers were spilled to stack but not recognized, from Gilad Reti.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  MAINTAINERS: Update my email address
  selftests/bpf: Add verifier test for PTR_TO_MEM spill
  bpf: Support PTR_TO_MEM{,_OR_NULL} register spilling
  bpf: Reject too big ctx_size_in for raw_tp test run
  libbpf: Allow loading empty BTFs
  bpf: Allow empty module BTFs
  bpf: Don't leak memory in bpf getsockopt when optlen == 0
  bpf: Update local storage test to check handling of null ptrs
  bpf: Fix typo in bpf_inode_storage.c
  bpf: Local storage helpers should check nullness of owner ptr passed
  bpf: Prevent double bpf_prog_put call from bpf_tracing_prog_attach
====================

Link: https://lore.kernel.org/r/20210116002025.15706-1-daniel@iogearbox.netSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      e23a8d00
  11. 15 Jan, 2021 2 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7