- 08 Sep, 2022 1 commit
-
-
Arun Ramadoss authored
Currently phy link up/down interrupt is enabled using the LAN87xx_INTERRUPT_MASK register. In the lan87xx_read_status function, phy link is determined using the T1_MODE_STAT_REG register comm_ready bit. comm_ready bit is set using the loc_rcvr_status & rem_rcvr_status. Whenever the phy link is up, LAN87xx_INTERRUPT_SOURCE link_up bit is set first but comm_ready bit takes some time to set based on local and remote receiver status. As per the current implementation, interrupt is triggered using link_up but the comm_ready bit is still cleared in the read_status function. So, link is always down. Initially tested with the shared interrupt mechanism with switch and internal phy which is working, but after implementing interrupt controller it is not working. It can fixed either by updating the read_status function to read from LAN87XX_INTERRUPT_SOURCE register or enable the interrupt mask for comm_ready bit. But the validation team recommends the use of comm_ready for link detection. This patch fixes by enabling the comm_ready bit for link_up in the LAN87XX_INTERRUPT_MASK_2 register (MISC Bank) and link_down in LAN87xx_INTERRUPT_MASK register. Fixes: 8a1b415d ("net: phy: added ethtool master-slave configuration support") Signed-off-by:
Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220905152750.5079-1-arun.ramadoss@microchip.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
- 07 Sep, 2022 8 commits
-
-
Yacan Liu authored
After modifying the QP to the Error state, all RX WR would be completed with WC in IB_WC_WR_FLUSH_ERR status. Current implementation does not wait for it is done, but destroy the QP and free the link group directly. So there is a risk that accessing the freed memory in tasklet context. Here is a crash example: BUG: unable to handle page fault for address: ffffffff8f220860 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD f7300e067 P4D f7300e067 PUD f7300f063 PMD 8c4e45063 PTE 800ffff08c9df060 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: G S OE 5.10.0-0607+ #23 Hardware name: Inspur NF5280M4/YZMB-00689-101, BIOS 4.1.20 07/09/2018 RIP: 0010:native_queued_spin_lock_slowpath+0x176/0x1b0 Code: f3 90 48 8b 32 48 85 f6 74 f6 eb d5 c1 ee 12 83 e0 03 83 ee 01 48 c1 e0 05 48 63 f6 48 05 00 c8 02 00 48 03 04 f5 00 09 98 8e <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 32 RSP: 0018:ffffb3b6c001ebd8 EFLAGS: 00010086 RAX: ffffffff8f220860 RBX: 0000000000000246 RCX: 0000000000080000 RDX: ffff91db1f86c800 RSI: 000000000000173c RDI: ffff91db62bace00 RBP: ffff91db62bacc00 R08: 0000000000000000 R09: c00000010000028b R10: 0000000000055198 R11: ffffb3b6c001ea58 R12: ffff91db80e05010 R13: 000000000000000a R14: 0000000000000006 R15: 0000000000000040 FS: 0000000000000000(0000) GS:ffff91db1f840000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff8f220860 CR3: 00000001f9580004 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> _raw_spin_lock_irqsave+0x30/0x40 mlx5_ib_poll_cq+0x4c/0xc50 [mlx5_ib] smc_wr_rx_tasklet_fn+0x56/0xa0 [smc] tasklet_action_common.isra.21+0x66/0x100 __do_softirq+0xd5/0x29c asm_call_irq_on_stack+0x12/0x20 </IRQ> do_softirq_own_stack+0x37/0x40 irq_exit_rcu+0x9d/0xa0 sysvec_call_function_single+0x34/0x80 asm_sysvec_call_function_single+0x12/0x20 Fixes: bd4ad577 ("smc: initialize IB transport incl. PD, MR, QP, CQ, event, WR") Signed-off-by:
Yacan Liu <liuyacan@corp.netease.com> Reviewed-by:
Tony Lu <tonylu@linux.alibaba.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lorenzo Bianconi authored
Even if max hash configured in hw in mtk_ppe_hash_entry is MTK_PPE_ENTRIES - 1, check theoretical OOB accesses in mtk_ppe_check_skb routine Fixes: c4f033d9 ("net: ethernet: mtk_eth_soc: rework hardware flow table management") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Menglong Dong authored
As Eric reported, the 'reason' field is not presented when trace the kfree_skb event by perf: $ perf record -e skb:kfree_skb -a sleep 10 $ perf script ip_defrag 14605 [021] 221.614303: skb:kfree_skb: skbaddr=0xffff9d2851242700 protocol=34525 location=0xffffffffa39346b1 reason: The cause seems to be passing kernel address directly to TP_printk(), which is not right. As the enum 'skb_drop_reason' is not exported to user space through TRACE_DEFINE_ENUM(), perf can't get the drop reason string from the 'reason' field, which is a number. Therefore, we introduce the macro DEFINE_DROP_REASON(), which is used to define the trace enum by TRACE_DEFINE_ENUM(). With the help of DEFINE_DROP_REASON(), now we can remove the auto-generate that we introduced in the commit ec43908d ("net: skb: use auto-generation to convert skb drop reason to string"), and define the string array 'drop_reasons'. Hmmmm...now we come back to the situation that have to maintain drop reasons in both enum skb_drop_reason and DEFINE_DROP_REASON. But they are both in dropreason.h, which makes it easier. After this commit, now the format of kfree_skb is like this: $ cat /tracing/events/skb/kfree_skb/format name: kfree_skb ID: 1524 format: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1; signed:0; field:int common_pid; offset:4; size:4; signed:1; field:void * skbaddr; offset:8; size:8; signed:0; field:void * location; offset:16; size:8; signed:0; field:unsigned short protocol; offset:24; size:2; signed:0; field:enum skb_drop_reason reason; offset:28; size:4; signed:0; print fmt: "skbaddr=%p protocol=%u location=%p reason: %s", REC->skbaddr, REC->protocol, REC->location, __print_symbolic(REC->reason, { 1, "NOT_SPECIFIED" }, { 2, "NO_SOCKET" } ...... Fixes: ec43908d ("net: skb: use auto-generation to convert skb drop reason to string") Link: https://lore.kernel.org/netdev/CANn89i+bx0ybvE55iMYf5GJM48WwV1HNpdm9Q6t-HaEstqpCSA@mail.gmail.com/Reported-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Menglong Dong <imagedong@tencent.com> Signed-off-by:
-
Lorenzo Bianconi authored
Set ib1 state to MTK_FOE_STATE_UNBIND in __mtk_foe_entry_clear routine. Fixes: 33fc42de ("net: ethernet: mtk_eth_soc: support creating mac address based offload entries") Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== Fixes for Felix DSA driver calculation of tc-taprio guard bands This series fixes some bugs which are not quite new, but date from v5.13 when static guard bands were enabled by Michael Walle to prevent tc-taprio overruns. The investigation started when Xiaoliang asked privately what is the expected max SDU for a traffic class when its minimum gate interval is 10 us. The answer, as it turns out, is not an L1 size of 1250 octets, but 1245 octets, since otherwise, the switch will not consider frames for egress scheduling, because the static guard band is exactly as large as the time interval. The switch needs a minimum of 33 ns outside of the guard band to consider a frame for scheduling, and the reduction of the max SDU by 5 provides exactly for that. The fix for that (patch 1/3) is relatively small, but during testing, it became apparent that cut-through forwarding prevents oversized frame dropping from working properly. This is solved through the larger patch 2/3. Finally, patch 3/3 fixes one more tc-taprio locking problem found through code inspection. ==================== Signed-off-by: -
Vladimir Oltean authored
The read-modify-write of QSYS_TAG_CONFIG from vsc9959_sched_speed_set() runs unlocked with respect to the other functions that access it, which are vsc9959_tas_guard_bands_update(), vsc9959_qos_port_tas_set() and vsc9959_tas_clock_adjust(). All the others are under ocelot->tas_lock, so move the vsc9959_sched_speed_set() access under that lock as well, to resolve the concurrency. Fixes: 55a515b1 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
Experimentally, it looks like when QSYS_QMAXSDU_CFG_7 is set to 605, frames even way larger than 601 octets are transmitted even though these should be considered as oversized, according to the documentation, and dropped. Since oversized frame dropping depends on frame size, which is only known at the EOF stage, and therefore not at SOF when cut-through forwarding begins, it means that the switch cannot take QSYS_QMAXSDU_CFG_* into consideration for traffic classes that are cut-through. Since cut-through forwarding has no UAPI to control it, and the driver enables it based on the mantra "if we can, then why not", the strategy is to alter vsc9959_cut_through_fwd() to take into consideration which tc's have oversize frame dropping enabled, and disable cut-through for them. Then, from vsc9959_tas_guard_bands_update(), we re-trigger the cut-through determination process. There are 2 strategies for vsc9959_cut_through_fwd() to determine whether a tc has oversized dropping enabled or not. One is to keep a bit mask of traffic classes per port, and the other is to read back from the hardware registers (a non-zero value of QSYS_QMAXSDU_CFG_* means the feature is enabled). We choose reading back from registers, because struct ocelot_port is shared with drivers (ocelot, seville) that don't support either cut-through nor tc-taprio, and we don't have a felix specific extension of struct ocelot_port. Furthermore, reading registers from the Felix hardware is quite cheap, since they are memory-mapped. Fixes: 55a515b1 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port") Signed-off-by:
-
Vladimir Oltean authored
The blamed commit broke tc-taprio schedules such as this one: tc qdisc replace dev $swp1 root taprio \ num_tc 8 \ map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ base-time 0 \ sched-entry S 0x7f 990000 \ sched-entry S 0x80 10000 \ flags 0x2 because the gate entry for TC 7 (S 0x80 10000 ns) now has a static guard band added earlier than its 'gate close' event, such that packet overruns won't occur in the worst case of the largest packet possible. Since guard bands are statically determined based on the per-tc QSYS_QMAXSDU_CFG_* with a fallback on the port-based QSYS_PORT_MAX_SDU, we need to discuss what happens with TC 7 depending on kernel version, since the driver, prior to commit 55a515b1 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port"), did not touch QSYS_QMAXSDU_CFG_*, and therefore relied on QSYS_PORT_MAX_SDU. 1 (before vsc9959_tas_guard_bands_update): QSYS_PORT_MAX_SDU defaults to 1518, and at gigabit this introduces a static guard band (independent of packet sizes) of 12144 ns, plus QSYS::HSCH_MISC_CFG.FRM_ADJ (bit time of 20 octets => 160 ns). But this is larger than the time window itself, of 10000 ns. So, the queue system never considers a frame with TC 7 as eligible for transmission, since the gate practically never opens, and these frames are forever stuck in the TX queues and hang the port. 2 (after vsc9959_tas_guard_bands_update): Under the sole goal of enabling oversized frame dropping, we make an effort to set QSYS_QMAXSDU_CFG_7 to 1230 bytes. But QSYS_QMAXSDU_CFG_7 plays one more role, which we did not take into account: per-tc static guard band, expressed in L2 byte time (auto-adjusted for FCS and L1 overhead). There is a discrepancy between what the driver thinks (that there is no guard band, and 100% of min_gate_len[tc] is available for egress scheduling) and what the hardware actually does (crops the equivalent of QSYS_QMAXSDU_CFG_7 ns out of min_gate_len[tc]). In practice, this means that the hardware thinks it has exactly 0 ns for scheduling tc 7. In both cases, even minimum sized Ethernet frames are stuck on egress rather than being considered for scheduling on TC 7, even if they would fit given a proper configuration. Considering the current situation, with vsc9959_tas_guard_bands_update(), frames between 60 octets and 1230 octets in size are not eligible for oversized dropping (because they are smaller than QSYS_QMAXSDU_CFG_7), but won't be considered as eligible for scheduling either, because the min_gate_len[7] (10000 ns) minus the guard band determined by QSYS_QMAXSDU_CFG_7 (1230 octets * 8 ns per octet == 9840 ns) minus the guard band auto-added for L1 overhead by QSYS::HSCH_MISC_CFG.FRM_ADJ (20 octets * 8 ns per octet == 160 octets) leaves 0 ns for scheduling in the queue system proper. Investigating the hardware behavior, it becomes apparent that the queue system needs precisely 33 ns of 'gate open' time in order to consider a frame as eligible for scheduling to a tc. So the solution to this problem is to amend vsc9959_tas_guard_bands_update(), by giving the per-tc guard bands less space by exactly 33 ns, just enough for one frame to be scheduled in that interval. This allows the queue system to make forward progress for that port-tc, and prevents it from hanging. Fixes: 297c4de6 ("net: dsa: felix: re-enable TAS guard band mode") Reported-by:Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by:
-
- 06 Sep, 2022 3 commits
-
-
jerry.meng authored
add support for Quectel RM520N which is based on Qualcomm SDX62 chip. 0x0801: DIAG + NMEA + AT + MODEM + RMNET T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0801 Rev= 5.04 S: Manufacturer=Quectel S: Product=RM520N-GL S: SerialNumber=384af524 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by:
jerry.meng <jerry-meng@foxmail.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/tencent_E50CA8A206904897C2D20DDAE90731183C05@qq.comSigned-off-by:
-
Christian Marangi authored
of_device_get_match_data is called on priv->dev before priv->dev is actually set. Move of_device_get_match_data after priv->dev is correctly set to fix this kernel panic. Fixes: 3bb0844e ("net: dsa: qca8k: cache match data to speed up access") Signed-off-by:
Christian Marangi <ansuelsmth@gmail.com> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220904215319.13070-1-ansuelsmth@gmail.comSigned-off-by:
-
Neal Cardwell authored
Fix a bug reported and analyzed by Nagaraj Arankal, where the handling of a spurious non-SACK RTO could cause a connection to fail to clear retrans_stamp, causing a later RTO to very prematurely time out the connection with ETIMEDOUT. Here is the buggy scenario, expanding upon Nagaraj Arankal's excellent report: (*1) Send one data packet on a non-SACK connection (*2) Because no ACK packet is received, the packet is retransmitted and we enter CA_Loss; but this retransmission is spurious. (*3) The ACK for the original data is received. The transmitted packet is acknowledged. The TCP timestamp is before the retrans_stamp, so tcp_may_undo() returns true, and tcp_try_undo_loss() returns true without changing state to Open (because tcp_is_sack() is false), and tcp_process_loss() returns without calling tcp_try_undo_recovery(). Normally after undoing a CA_Loss episode, tcp_fastretrans_alert() would see that the connection has returned to CA_Open and fall through and call tcp_try_to_open(), which would set retrans_stamp to 0. However, for non-SACK connections we hold the connection in CA_Loss, so do not fall through to call tcp_try_to_open() and do not set retrans_stamp to 0. So retrans_stamp is (erroneously) still non-zero. At this point the first "retransmission event" has passed and been recovered from. Any future retransmission is a completely new "event". However, retrans_stamp is erroneously still set. (And we are still in CA_Loss, which is correct.) (*4) After 16 minutes (to correspond with tcp_retries2=15), a new data packet is sent. Note: No data is transmitted between (*3) and (*4) and we disabled keep alives. The socket's timeout SHOULD be calculated from this point in time, but instead it's calculated from the prior "event" 16 minutes ago (step (*2)). (*5) Because no ACK packet is received, the packet is retransmitted. (*6) At the time of the 2nd retransmission, the socket returns ETIMEDOUT, prematurely, because retrans_stamp is (erroneously) too far in the past (set at the time of (*2)). This commit fixes this bug by ensuring that we reuse in tcp_try_undo_loss() the same careful logic for non-SACK connections that we have in tcp_try_undo_recovery(). To avoid duplicating logic, we factor out that logic into a new tcp_is_non_sack_preventing_reopen() helper and call that helper from both undo functions. Fixes: da34ac76 ("tcp: only undo on partial ACKs in CA_Loss") Reported-by:Nagaraj Arankal <nagaraj.p.arankal@hpe.com> Link: https://lore.kernel.org/all/SJ0PR84MB1847BE6C24D274C46A1B9B0EB27A9@SJ0PR84MB1847.NAMPRD84.PROD.OUTLOOK.COM/Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Reviewed-by:
-
- 05 Sep, 2022 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothDavid S. Miller authored
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fix regression preventing ACL packet transmission ==================== Signed-off-by: -
Christophe JAILLET authored
There is no point to call pcim_iounmap_regions() in the remove function, this frees a managed resource that would be release by the framework anyway. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. Fix this up to be much simpler logic and only create the root debugfs directory once when the driver is first accessed. That resolves the memory leak and makes things more obvious as to what the intent is. Cc: Marcin Wojtas <mw@semihalf.com> Cc: Russell King <linux@armlinux.org.uk> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Cc: stable <stable@kernel.org> Fixes: 21da57a2 ("net: mvpp2: add a debugfs interface for the Header Parser") Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
David Lebrun authored
The SRv6 layer allows defining HMAC data that can later be used to sign IPv6 Segment Routing Headers. This configuration is realised via netlink through four attributes: SEG6_ATTR_HMACKEYID, SEG6_ATTR_SECRET, SEG6_ATTR_SECRETLEN and SEG6_ATTR_ALGID. Because the SECRETLEN attribute is decoupled from the actual length of the SECRET attribute, it is possible to provide invalid combinations (e.g., secret = "", secretlen = 64). This case is not checked in the code and with an appropriately crafted netlink message, an out-of-bounds read of up to 64 bytes (max secret length) can occur past the skb end pointer and into skb_shared_info: Breakpoint 1, seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208 208 memcpy(hinfo->secret, secret, slen); (gdb) bt #0 seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208 #1 0xffffffff81e012e9 in genl_family_rcv_msg_doit (skb=skb@entry=0xffff88800b1f9f00, nlh=nlh@entry=0xffff88800b1b7600, extack=extack@entry=0xffffc90000ba7af0, ops=ops@entry=0xffffc90000ba7a80, hdrlen=4, net=0xffffffff84237580 <init_net>, family=<optimized out>, family=<optimized out>) at net/netlink/genetlink.c:731 #2 0xffffffff81e01435 in genl_family_rcv_msg (extack=0xffffc90000ba7af0, nlh=0xffff88800b1b7600, skb=0xffff88800b1f9f00, family=0xffffffff82fef6c0 <seg6_genl_family>) at net/netlink/genetlink.c:775 #3 genl_rcv_msg (skb=0xffff88800b1f9f00, nlh=0xffff88800b1b7600, extack=0xffffc90000ba7af0) at net/netlink/genetlink.c:792 #4 0xffffffff81dfffc3 in netlink_rcv_skb (skb=skb@entry=0xffff88800b1f9f00, cb=cb@entry=0xffffffff81e01350 <genl_rcv_msg>) at net/netlink/af_netlink.c:2501 #5 0xffffffff81e00919 in genl_rcv (skb=0xffff88800b1f9f00) at net/netlink/genetlink.c:803 #6 0xffffffff81dff6ae in netlink_unicast_kernel (ssk=0xffff888010eec800, skb=0xffff88800b1f9f00, sk=0xffff888004aed000) at net/netlink/af_netlink.c:1319 #7 netlink_unicast (ssk=ssk@entry=0xffff888010eec800, skb=skb@entry=0xffff88800b1f9f00, portid=portid@entry=0, nonblock=<optimized out>) at net/netlink/af_netlink.c:1345 #8 0xffffffff81dff9a4 in netlink_sendmsg (sock=<optimized out>, msg=0xffffc90000ba7e48, len=<optimized out>) at net/netlink/af_netlink.c:1921 ... (gdb) p/x ((struct sk_buff *)0xffff88800b1f9f00)->head + ((struct sk_buff *)0xffff88800b1f9f00)->end $1 = 0xffff88800b1b76c0 (gdb) p/x secret $2 = 0xffff88800b1b76c0 (gdb) p slen $3 = 64 '@' The OOB data can then be read back from userspace by dumping HMAC state. This commit fixes this by ensuring SECRETLEN cannot exceed the actual length of SECRET. Reported-by:Lucas Leong <wmliang.tw@gmail.com> Tested: verified that EINVAL is correctly returned when secretlen > len(secret) Fixes: 4f4853dc ("ipv6: sr: implement API to control SR HMAC structure") Signed-off-by:
David Lebrun <dlebrun@google.com> Signed-off-by:
-
David S. Miller authored
Hangbin Liu says: ==================== bonding: fix lladdr finding and confirmation This patch set fixed 3 issues when setting lladdr as bonding IPv6 target. Please see each patch for the details. v2: separate the patch to 3 parts ==================== Signed-off-by: -
Hangbin Liu authored
The unsolicited NA message with all-nodes multicast dest address should be valid, as this also means the link could reach the target. Also rename bond_validate_ns() to bond_validate_na(). Reported-by:
LiLiang <liali@redhat.com> Fixes: 5e1eeef6 ("bonding: NS target should accept link local address") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Hangbin Liu authored
When a link is enslave to bond, it need to set the interface down first. This makes the slave remove mac multicast address 33:33:00:00:00:01(The IPv6 multicast address ff02::1 is kept even when the interface down). When bond set the slave up, ipv6_mc_up() was not called due to commit c2edacf8 ("bonding / ipv6: no addrconf for slaves separately from master"). This is not an issue before we adding the lladdr target feature for bonding, as the mac multicast address will be added back when bond interface up and join group ff02::1. But after adding lladdr target feature for bonding. When user set a lladdr target, the unsolicited NA message with all-nodes multicast dest will be dropped as the slave interface never add 33:33:00:00:00:01 back. Fix this by calling ipv6_mc_up() to add 33:33:00:00:00:01 back when the slave interface up. Reported-by:
-
Hangbin Liu authored
When ns_ip6_target was set, the ipv6_dev_get_saddr() will be called to get available source address and send IPv6 neighbor solicit message. If the target is global address, ipv6_dev_get_saddr() will get any available src address. But if the target is link local address, ipv6_dev_get_saddr() will only get available address from our interface, i.e. the corresponding bond interface. But before bond interface up, all the address is tentative, while ipv6_dev_get_saddr() will ignore tentative address. This makes we can't find available link local src address, then bond_ns_send() will not be called and no NS message was sent. Finally bond interface will keep in down state. Fix this by sending NS with unspecified address if there is no available source address. Reported-by:
-
- 04 Sep, 2022 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessDavid S. Miller authored
Johannes berg says: ==================== We have a handful of fixes: - fix DMA from stack in wilc1000 driver - fix crash on chip reset failure in mt7921e - fix for the reported warning on aggregation timer expiry - check packet lengths in hwsim virtio paths - fix compiler warnings/errors with AAD construction by using struct_group - fix Intel 4965 driver rate scale operation - release channel contexts correctly in mac80211 mlme code ==================== Signed-off-by:
-
- 03 Sep, 2022 12 commits
-
-
Johannes Berg authored
We sometimes copy all the addresses from the 802.11 header for the AAD, which may cause complaints from fortify checks. Use struct_group() to avoid the compiler warnings/errors. Change-Id: Ic3ea389105e7813b22095b295079eecdabde5045 Signed-off-by:Johannes Berg <johannes.berg@intel.com>
-
Soenke Huster authored
An invalid packet with a length shorter than the specified length in the netlink header can lead to use-after-frees and slab-out-of-bounds in the processing of the netlink attributes, such as the following: BUG: KASAN: slab-out-of-bounds in __nla_validate_parse+0x1258/0x2010 Read of size 2 at addr ffff88800ac7952c by task kworker/0:1/12 Workqueue: events hwsim_virtio_rx_work Call Trace: <TASK> dump_stack_lvl+0x45/0x5d print_report.cold+0x5e/0x5e5 kasan_report+0xb1/0x1c0 __nla_validate_parse+0x1258/0x2010 __nla_parse+0x22/0x30 hwsim_virtio_handle_cmd.isra.0+0x13f/0x2d0 hwsim_virtio_rx_work+0x1b2/0x370 process_one_work+0x8df/0x1530 worker_thread+0x575/0x11a0 kthread+0x29d/0x340 ret_from_fork+0x22/0x30 </TASK> Discarding packets with an invalid length solves this. Therefore, skb->len must be set at reception. Change-Id: Ieaeb9a4c62d3beede274881a7c2722c6c6f477b6 Signed-off-by:
Soenke Huster <soenke.huster@eknoes.de> Signed-off-by:
-
Johannes Berg authored
If we hit an authentication or association timeout, we only release the chanctx for the deflink, and the other link(s) are released later by ieee80211_vif_set_links(), but we're not locking this correctly. Fix the locking here while releasing the channels and links. Change-Id: I9e08c1a5434592bdc75253c1abfa6c788f9f39b1 Fixes: 81151ce4 ("wifi: mac80211: support MLO authentication/association with one link") Signed-off-by:
-
Johannes Berg authored
In the prep_channel error case we didn't release the deflink channel leaving it to be left around. Fix that. Change-Id: If0dfd748125ec46a31fc6045a480dc28e03723d2 Signed-off-by: -
Mukesh Sisodiya authored
The rx data link pointer isn't set from the RX aggregation timer, resulting in a later warning. Fix that by setting it to the first valid link for now, with a FIXME to worry about statistics later, it's not very important since it's just the timeout case. Reported-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/498d714c-76be-9d04-26db-a1206878de5e@redhat.com Fixes: 56057da4 ("wifi: mac80211: rx: track link in RX data") Signed-off-by:
Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueDavid S. Miller authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-09-02 (i40e, iavf) This series contains updates to i40e and iavf drivers. Przemyslaw adds reset to ADQ configuration to allow for setting of rate limit beyond TC0 for i40e. Ivan Vecera does not free client on failure to open which could cause NULL pointer dereference to occur on i40e. He also detaches device during reset to prevent NDO calls with could cause races for iavf. ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueDavid S. Miller authored
Tony Nguyen says: ==================== This series contains updates to ice driver only. Przemyslaw fixes memory leak of DMA memory due to incorrect freeing of rx_buf. Michal S corrects incorrect call to free memory. ==================== Signed-off-by: -
Oleksij Rempel authored
After driver refactoring we was running ksz9477 specific CPU port configuration on ksz8 family which ended with kernel oops. So, make sure we run this code only on ksz9477 compatible devices. Tested on KSZ8873 and KSZ9477. Fixes: da8cd085 ("net: dsa: microchip: add support for common phylink mac link up") Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
-
Paul Durrant authored
Removing 'hotplug-status' in backend_disconnected() means that it will be removed even in the case that the frontend unilaterally disconnects (which it is free to do at any time). The consequence of this is that, when the frontend attempts to re-connect, the backend gets stuck in 'InitWait' rather than moving straight to 'Connected' (which it can do because the hotplug script has already run). Instead, the 'hotplug-status' mode should be removed in netback_remove() i.e. when the vif really is going away. Fixes: 0f4558ae ("Revert "xen-netback: remove 'hotplug-status' once it has served its purpose"") Signed-off-by:
Paul Durrant <pdurrant@amazon.com> Signed-off-by:
-
Csókás Bence authored
Mutexes cannot be taken in a non-preemptible context, causing a panic in `fec_ptp_save_state()`. Replacing `ptp_clk_mutex` by `tmreg_lock` fixes this. Fixes: 6a4d7234 ("net: fec: ptp: avoid register access when ipg clock is disabled") Fixes: f7995922 ("fec: Restart PPS after link state change") Reported-by:
Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/all/20220827160922.642zlcd5foopozru@pengutronix.de/Signed-off-by:
Csókás Bence <csokas.bence@prolan.hu> Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Apalis iMX6 Link: https://lore.kernel.org/r/20220901140402.64804-1-csokas.bence@prolan.huSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Wei Fang authored
There is a very low probability that tx timeout will occur during suspend and resume stress test on imx6q platform. So we add pm_qos support to prevent system from entering low level idles which may affect the transmission of tx. Signed-off-by:
Wei Fang <wei.fang@nxp.com> Link: https://lore.kernel.org/r/20220830070148.2021947-1-wei.fang@nxp.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski authored
Florian Westphal says: ==================== netfilter: bug fixes for net 1. Fix IP address check in irc DCC conntrack helper, this should check the opposite direction rather than the destination address of the packets' direction, from David Leadbeater. 2. bridge netfilter needs to drop dst references, from Harsh Modi. This was fine back in the day the code was originally written, but nowadays various tunnels can pre-set metadata dsts on packets. 3. Remove nf_conntrack_helper sysctl and the modparam toggle, users need to explicitily assign the helpers to use via nftables or iptables. Conntrack helpers, by design, may be used to add dynamic port redirections to internal machines, so its necessary to restrict which hosts/peers are allowed to use them. It was discovered that improper checking in the irc DCC helper makes it possible to trigger the 'please do dynamic port forward' from outside by embedding a 'DCC' in a PING request; if the client echos that back a expectation/port forward gets added. The auto-assign-for-everything mechanism has been in "please don't do this" territory since 2012. From Pablo. 4. Fix a memory leak in the netdev hook error unwind path, also from Pablo. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_conntrack_irc: Fix forged IP logic netfilter: nf_tables: clean up hook list when offload flags check fails netfilter: br_netfilter: Drop dst references before setting. netfilter: remove nf_conntrack_helper sysctl and modparam toggles ==================== Link: https://lore.kernel.org/r/20220901071238.3044-1-fw@strlen.deSigned-off-by:
-
- 02 Sep, 2022 7 commits
-
-
Luiz Augusto von Dentz authored
hci_read_buffer_size_sync shall not use HCI_OP_LE_READ_BUFFER_SIZE_V2 sinze that is LE specific, instead it is hci_le_read_buffer_size_sync version that shall use it. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216382 Fixes: 26afbd82 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Ivan Vecera authored
iavf_reset_task() takes crit_lock at the beginning and holds it during whole call. The function subsequently calls iavf_init_interrupt_scheme() that grabs RTNL. Problem occurs when userspace initiates during the reset task any ndo callback that runs under RTNL like iavf_open() because some of that functions tries to take crit_lock. This leads to classic A-B B-A deadlock scenario. To resolve this situation the device should be detached in iavf_reset_task() prior taking crit_lock to avoid subsequent ndos running under RTNL and reattach the device at the end. Fixes: 62fe2a86 ("i40evf: add missing rtnl_lock() around i40evf_set_interrupt_capability") Cc: Jacob Keller <jacob.e.keller@intel.com> Cc: Patryk Piotrowski <patryk.piotrowski@intel.com> Cc: SlawomirX Laba <slawomirx.laba@intel.com> Tested-by:
Vitaly Grinberg <vgrinber@redhat.com> Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Tested-by:
Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Ivan Vecera authored
The driver incorrectly frees client instance and subsequent i40e module removal leads to kernel crash. Reproducer: 1. Do ethtool offline test followed immediately by another one host# ethtool -t eth0 offline; ethtool -t eth0 offline 2. Remove recursively irdma module that also removes i40e module host# modprobe -r irdma Result: [ 8675.035651] i40e 0000:3d:00.0 eno1: offline testing starting [ 8675.193774] i40e 0000:3d:00.0 eno1: testing finished [ 8675.201316] i40e 0000:3d:00.0 eno1: offline testing starting [ 8675.358921] i40e 0000:3d:00.0 eno1: testing finished [ 8675.496921] i40e 0000:3d:00.0: IRDMA hardware initialization FAILED init_state=2 status=-110 [ 8686.188955] i40e 0000:3d:00.1: i40e_ptp_stop: removed PHC on eno2 [ 8686.943890] i40e 0000:3d:00.1: Deleted LAN device PF1 bus=0x3d dev=0x00 func=0x01 [ 8686.952669] i40e 0000:3d:00.0: i40e_ptp_stop: removed PHC on eno1 [ 8687.761787] BUG: kernel NULL pointer dereference, address: 0000000000000030 [ 8687.768755] #PF: supervisor read access in kernel mode [ 8687.773895] #PF: error_code(0x0000) - not-present page [ 8687.779034] PGD 0 P4D 0 [ 8687.781575] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 8687.785935] CPU: 51 PID: 172891 Comm: rmmod Kdump: loaded Tainted: G W I 5.19.0+ #2 [ 8687.794800] Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.0X.02.0001.051420190324 05/14/2019 [ 8687.805222] RIP: 0010:i40e_lan_del_device+0x13/0xb0 [i40e] [ 8687.810719] Code: d4 84 c0 0f 84 b8 25 01 00 e9 9c 25 01 00 41 bc f4 ff ff ff eb 91 90 0f 1f 44 00 00 41 54 55 53 48 8b 87 58 08 00 00 48 89 fb <48> 8b 68 30 48 89 ef e8 21 8a 0f d5 48 89 ef e8 a9 78 0f d5 48 8b [ 8687.829462] RSP: 0018:ffffa604072efce0 EFLAGS: 00010202 [ 8687.834689] RAX: 0000000000000000 RBX: ffff8f43833b2000 RCX: 0000000000000000 [ 8687.841821] RDX: 0000000000000000 RSI: ffff8f4b0545b298 RDI: ffff8f43833b2000 [ 8687.848955] RBP: ffff8f43833b2000 R08: 0000000000000001 R09: 0000000000000000 [ 8687.856086] R10: 0000000000000000 R11: 000ffffffffff000 R12: ffff8f43833b2ef0 [ 8687.863218] R13: ffff8f43833b2ef0 R14: ffff915103966000 R15: ffff8f43833b2008 [ 8687.870342] FS: 00007f79501c3740(0000) GS:ffff8f4adffc0000(0000) knlGS:0000000000000000 [ 8687.878427] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8687.884174] CR2: 0000000000000030 CR3: 000000014276e004 CR4: 00000000007706e0 [ 8687.891306] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8687.898441] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8687.905572] PKRU: 55555554 [ 8687.908286] Call Trace: [ 8687.910737] <TASK> [ 8687.912843] i40e_remove+0x2c0/0x330 [i40e] [ 8687.917040] pci_device_remove+0x33/0xa0 [ 8687.920962] device_release_driver_internal+0x1aa/0x230 [ 8687.926188] driver_detach+0x44/0x90 [ 8687.929770] bus_remove_driver+0x55/0xe0 [ 8687.933693] pci_unregister_driver+0x2a/0xb0 [ 8687.937967] i40e_exit_module+0xc/0xf48 [i40e] Two offline tests cause IRDMA driver failure (ETIMEDOUT) and this failure is indicated back to i40e_client_subtask() that calls i40e_client_del_instance() to free client instance referenced by pf->cinst and sets this pointer to NULL. During the module removal i40e_remove() calls i40e_lan_del_device() that dereferences pf->cinst that is NULL -> crash. Do not remove client instance when client open callbacks fails and just clear __I40E_CLIENT_INSTANCE_OPENED bit. The driver also needs to take care about this situation (when netdev is up and client is NOT opened) in i40e_notify_client_of_netdev_close() and calls client close callback only when __I40E_CLIENT_INSTANCE_OPENED is set. Fixes: 0ef2d5af ("i40e: KISS the client interface") Signed-off-by:
Helena Anna Dubel <helena.anna.dubel@intel.com> Signed-off-by:
-
Przemyslaw Patynowski authored
Fix HW rate limiting for ADQ. Fallback to kernel queue selection for ADQ, as it is network stack that decides which queue to use for transmit with ADQ configured. Reset PF after creation of VMDq2 VSIs required for ADQ, as to reprogram TX queue contexts in i40e_configure_tx_ring. Without this patch PF would limit TX rate only according to TC0. Fixes: a9ce82f7 ("i40e: Enable 'channel' mode in mqprio for TC configs") Signed-off-by:
Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by:
Jan Sokolowski <jan.sokolowski@intel.com> Tested-by:
Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by:
-
Michal Swiatkowski authored
pf->avail_txqs was allocated using bitmap_zalloc, bitmap_free should be used to free this memory. Fixes: 78b5713a ("ice: Alloc queue management bitmaps and arrays dynamically") Signed-off-by:
Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by:
-
Przemyslaw Patynowski authored
Fix leak, when user changes ring parameters. During reallocation of RX buffers, new DMA mappings are created for those buffers. New buffers with different RX ring count should substitute older ones, but those buffers were freed in ice_vsi_cfg_rxq and reallocated again with ice_alloc_rx_buf. kfree on rx_buf caused leak of already mapped DMA. Reallocate ZC with xdp_buf struct, when BPF program loads. Reallocate back to rx_buf, when BPF program unloads. If BPF program is loaded/unloaded and XSK pools are created, reallocate RX queues accordingly in XDP_SETUP_XSK_POOL handler. Steps for reproduction: while : do for ((i=0; i<=8160; i=i+32)) do ethtool -G enp130s0f0 rx $i tx $i sleep 0.5 ethtool -g enp130s0f0 done done Fixes: 617f3e1b ("ice: xsk: allocate separate memory for XDP SW ring") Signed-off-by:
Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Chandan <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fsDavid S. Miller authored
David Howells says: ==================== rxrpc fixes Here are some fixes for AF_RXRPC: (1) Fix the handling of ICMP/ICMP6 packets. This is a problem due to rxrpc being switched to acting as a UDP tunnel, thereby allowing it to steal the packets before they go through the UDP Rx queue. UDP tunnels can't get ICMP/ICMP6 packets, however. This patch adds an additional encap hook so that they can. (2) Fix the encryption routines in rxkad to handle packets that have more than three parts correctly. The problem is that ->nr_frags doesn't count the initial fragment, so the sglist ends up too short. (3) Fix a problem with destruction of the local endpoint potentially getting repeated. (4) Fix the calculation of the time at which to resend. jiffies_to_usecs() gives microseconds, not nanoseconds. (5) Fix AFS to work out when callback promises and locks expire based on the time an op was issued rather than the time the first reply packet arrives. We don't know how long the server took between calculating the expiry interval and transmitting the reply. (6) Given (5), rxrpc_get_reply_time() is no longer used, so remove it. ==================== Signed-off-by:
-
