1. 25 Mar, 2013 6 commits
    • Linus Torvalds's avatar
      Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband · 53b68092
      Linus Torvalds authored
      Pull infiniband/rdma fixes from Roland Dreier:
       "Small batch of InfiniBand/RDMA fixes for 3.9:
      
         - Fix for TX lockup in IPoIB
         - QLogic -> Intel update for qib driver
         - Small static checker fix for qib
         - Fix error path return value in cxgb4"
      
      * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
        IB/qib: change QLogic to Intel
        IB/ipath: Silence a static checker warning
        IPoIB: Fix send lockup due to missed TX completion
        RDMA/cxgb4: Fix error return code in create_qp()
      53b68092
    • Linus Torvalds's avatar
      Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · fb9bb182
      Linus Torvalds authored
      Pull ARM SoC bug fixes from Arnd Bergmann:
       "Four patches for arm-soc this week:
      
         - Kevin Hilman is no longer reachable under his previous email
           address.  He submitted the patch earlier, but nobody felt
           responsible to pick it up.
      
         - One Tegra fix for an incorect register address in device tree.
      
         - IMX multiplatform support exposes a configuration option that leads
           to unbootable kernels on all other machines and that needs to
           depend on that platform.
      
         - A nontrivial bug fix for the setup of the mxs video output."
      
      * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
        MAINTAINERS: update email address for Kevin Hilman
        ARM: tegra: fix register address of slink controller
        ARM: imx: add dependency check for DEBUG_IMX_UART_PORT
        ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0
      fb9bb182
    • Linus Torvalds's avatar
      Merge branch 'for-3.9' of git://linux-nfs.org/~bfields/linux · 844fdd9a
      Linus Torvalds authored
      Pull nfsd bugfixes from J Bruce Fields:
       "Fixes for a couple mistakes in the new DRC code.  And thanks to Kent
        Overstreet for noticing we've been sync'ing the wrong range on stable
        writes since 3.8."
      
      * 'for-3.9' of git://linux-nfs.org/~bfields/linux:
        nfsd: fix bad offset use
        nfsd: fix startup order in nfsd_reply_cache_init
        nfsd: only unhash DRC entries that are in the hashtable
      844fdd9a
    • Linus Torvalds's avatar
      Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux · c4052ba9
      Linus Torvalds authored
      Pull drm fixes from Dave Airlie:
       "Exynos and Intel fixes.
      
        The intel fixes are fairly straightforward, mostly reverts due to bugs
        found.  The exynos one is a big larger since they found some issues
        with the G2D engine and iommu interaction, and needed to verify the
        operations a lot better than they were previously, otherwise a user
        app can just crash the kernel with an iommu fault."
      
      * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
        Revert "drm/i915: write backlight harder"
        drm/i915: don't disable the power well yet
        Revert "drm/i915: set TRANSCODER_EDP even earlier"
        drm/exynos: Check g2d cmd list for g2d restrictions
        drm/exynos: Add a new function to get gem buffer size
        drm/exynos: Deal with g2d buffer info more efficiently
        drm/exynos: Clean up some G2D codes for readability
        drm/exynos: Fix G2D core malfunctioning issue
        drm/exynos: clear node object type at gem unmap
        drm/exynos: Fix error routine to getting dma addr.
        drm/exynos: Replaced kzalloc & memcpy with kmemdup
        drm/exynos: fimd: calculate the correct address offset
        drm/exynos: Make mixer_check_timing static
        drm/exynos: modify the compatible string for exynos fimd
      c4052ba9
    • Dave Airlie's avatar
      Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel into HEAD · 7ac8833f
      Dave Airlie authored
      Daniel writes:
      "Just three revert/disable by default patches, one of them cc: stable
      (since the offending commit was cc: stable, too)."
      
      * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
        Revert "drm/i915: write backlight harder"
        drm/i915: don't disable the power well yet
        Revert "drm/i915: set TRANSCODER_EDP even earlier"
      7ac8833f
    • Dave Airlie's avatar
      Merge branch 'exynos-drm-fixes' of... · ac165b00
      Dave Airlie authored
      Merge branch 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into HEAD
      
      Inki writes:
      Includes bug fixes and code cleanups.
      And it considers some restrictions to G2D hardware.
      With this, the malfunction and page fault issues to g2d driver
      would be fixed.
      
      * 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
        drm/exynos: Check g2d cmd list for g2d restrictions
        drm/exynos: Add a new function to get gem buffer size
        drm/exynos: Deal with g2d buffer info more efficiently
        drm/exynos: Clean up some G2D codes for readability
        drm/exynos: Fix G2D core malfunctioning issue
        drm/exynos: clear node object type at gem unmap
        drm/exynos: Fix error routine to getting dma addr.
        drm/exynos: Replaced kzalloc & memcpy with kmemdup
        drm/exynos: fimd: calculate the correct address offset
        drm/exynos: Make mixer_check_timing static
        drm/exynos: modify the compatible string for exynos fimd
      ac165b00
  2. 24 Mar, 2013 6 commits
    • Linus Torvalds's avatar
      Merge tag 'pinctrl-fixes-for-v3.9' of... · 3912a677
      Linus Torvalds authored
      Merge tag 'pinctrl-fixes-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
      
      Pull pinctrl fixes from Linus Walleij:
       "Here are a few pinctrl fixes for the v3.9 rc series:
         - Usecount bounds checking so we do not go below zero on mux
           usecounts.
         - Loop range checking in GPIO ranges in the DT range parser.
         - Proper print in debugfs for pinconf state.
         - Fix compilation bug in generic pinconf code.
         - Minor bugfixes to abx500 and mvebu drivers."
      
      * tag 'pinctrl-fixes-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
        pinmux: forbid mux_usecount to be set at UINT_MAX
        pinctrl: mvebu: fix checking for SoC specific controls
        pinctrl: generic: Fix compilation error
        pinctrl: Print the correct information in debugfs pinconf-state file
        pinctrl: abx500: Fix checking if pin use AlternateFunction register
        gpio: fix wrong checking condition for gpio range
      3912a677
    • Linus Torvalds's avatar
      Merge branch 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 33b73e9b
      Linus Torvalds authored
      Pull x86 fixes from Peter Anvin:
       "A collection of minor fixes, more EFI variables paranoia
        (anti-bricking) plus the ability to disable the pstore either as a
        runtime default or completely, due to bricking concerns."
      
      * 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        efivars: Fix check for CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE
        x86, microcode_intel_early: Mark apply_microcode_early() as cpuinit
        efivars: Handle duplicate names from get_next_variable()
        efivars: explicitly calculate length of VariableName
        efivars: Add module parameter to disable use as a pstore backend
        efivars: Allow disabling use as a pstore backend
        x86-32, microcode_intel_early: Fix crash with CONFIG_DEBUG_VIRTUAL
        x86-64: Fix the failure case in copy_user_handle_tail()
      33b73e9b
    • Daniel Vetter's avatar
      Revert "drm/i915: write backlight harder" · b1289371
      Daniel Vetter authored
      This reverts commit cf0a6584.
      
      Turns out that cargo-culting breaks systems. Note that we can't revert
      further, since
      
      commit 770c1231
      Author: Takashi Iwai <tiwai@suse.de>
      Date:   Sat Aug 11 08:56:42 2012 +0200
      
          drm/i915: Fix blank panel at reopening lid
      
      fixed a regression in 3.6-rc kernels for which we've never figured out
      the exact root cause. But some further inspection of the backlight
      code reveals that it's seriously lacking locking. And especially the
      asle backlight update is know to get fired (through some smm magic)
      when writing specific backlight control registers. So the possibility
      of suffering from races is rather real.
      
      Until those races are fixed I don't think it makes sense to try
      further hacks. Which sucks a bit, but sometimes that's how it is :(
      
      References: http://www.mail-archive.com/intel-gfx@lists.freedesktop.org/msg18788.html
      Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47941Tested-by: default avatarTakashi Iwai <tiwai@suse.de>
      Cc: Jani Nikula <jani.nikula@intel.com>
      Cc: Takashi Iwai <tiwai@suse.de>
      Cc: stable@vger.kernel.org (the reverted commit was cc: stable, too)
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      b1289371
    • Paulo Zanoni's avatar
      drm/i915: don't disable the power well yet · 2124b72e
      Paulo Zanoni authored
      We're still not 100% ready to disable the power well, so don't disable
      it for now. When we disable it we break the audio driver (because some
      of the audio registers are on the power well) and machines with eDP on
      port D (because it doesn't use TRANSCODER_EDP).
      
      Also, instead of just reverting the code, add a Kernel option to let
      us disable it if we want. This will allow us to keep developing and
      testing the feature while it's not enabled.
      
      This fixes problems caused by the following commit:
        commit d6dd9eb1
        Author: Daniel Vetter <daniel.vetter@ffwll.ch>
        Date:   Tue Jan 29 16:35:20 2013 -0200
             drm/i915: dynamic Haswell display power well support
      
      References: http://www.mail-archive.com/intel-gfx@lists.freedesktop.org/msg18788.html
      Cc: Takashi Iwai <tiwai@suse.de>
      Cc: Mengdong Lin <mengdong.lin@intel.com>
      Signed-off-by: default avatarPaulo Zanoni <paulo.r.zanoni@intel.com>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      2124b72e
    • Daniel Vetter's avatar
      Revert "drm/i915: set TRANSCODER_EDP even earlier" · bba2181c
      Daniel Vetter authored
      This reverts commit cc464b2a.
      
      The reason is that Takashi Iwai reported a regression bisected to this
      commit:
      
      http://www.mail-archive.com/intel-gfx@lists.freedesktop.org/msg18788.html
      
      His machine has eDP on port D (usual desktop all-in-on setup), which
      intel_dp.c identifies as an eDP panel, but the hsw ddi code
      mishandles.
      
      Closer inspection of the code reveals that haswell_crtc_mode_set also
      checks intel_encoder_is_pch_edp when setting is_cpu_edp. On haswell
      that doesn't make much sense (since there's no edp on the pch), but
      what this function _really_ checks is whether that edp connector is on
      port A or port D. It's just that on ilk-ivb port D was on the pch ...
      
      So that explains why this seemingly innocent change killed eDP on port
      D. Furthermore it looks like everything else accidentally works, since
      we've never enabled eDP on port D support for hsw intentionally (e.g.
      we still register the HDMI output for port D in that case).
      
      But in retrospective I also don't like that this leaks highly platform
      specific details into common code, and the reason is that the drm
      vblank layer sucks. So instead I think we should:
      - move the cpu_transcoder into the dynamic pipe_config tracking (once
        that's merged).
      - fix up the drm vblank layer to finally deal with kms crtc objects
        instead of int pipes.
      
      v2: Pimp commit message with the better diagnosis as discussed with
      Paulo on irc.
      
      Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
      Cc: Takashi Iwai <tiwai@suse.de>
      Reviewed-by: default avatarPaulo Zanoni <paulo.r.zanoni@intel.com>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      bba2181c
    • H. Peter Anvin's avatar
      b9726d9d
  3. 23 Mar, 2013 13 commits
  4. 22 Mar, 2013 15 commits
    • Linus Torvalds's avatar
      Merge git://git.infradead.org/users/willy/linux-nvme · 5da273fe
      Linus Torvalds authored
      Pull NVMe driver update from Matthew Wilcox:
       "These patches have mostly been baking for a few months; sorry I didn't
        get them in during the merge window.  They're all bug fixes, except
        for the addition of the SMART log and the addition to MAINTAINERS."
      
      * git://git.infradead.org/users/willy/linux-nvme:
        NVMe: Add namespaces with no LBA range feature
        MAINTAINERS: Add entry for the NVMe driver
        NVMe: Initialize iod nents to 0
        NVMe: Define SMART log
        NVMe: Add result to nvme_get_features
        NVMe: Set result from user admin command
        NVMe: End queued bio requests when freeing queue
        NVMe: Free cmdid on nvme_submit_bio error
      5da273fe
    • Linus Torvalds's avatar
      Merge branch 'akpm' (fixes from Andrew) · 14629ed3
      Linus Torvalds authored
      Merge misc fixes from Andrew Morton.
      
      * emailed patches from Andrew Morton <akpm@linux-foundation.org>:
        mqueue: sys_mq_open: do not call mnt_drop_write() if read-only
        mm/hotplug: only free wait_table if it's allocated by vmalloc
        dma-debug: update DMA debug API to better handle multiple mappings of a buffer
        dma-debug: fix locking bug in check_unmap()
        drivers/rtc/rtc-at91rm9200.c: use a variable for storing IMR
        drivers/video/ep93xx-fb.c: include <linux/io.h> for devm_ioremap()
        drivers/rtc/rtc-da9052.c: fix for rtc device registration
        mm: zone_end_pfn is too small
        poweroff: change orderly_poweroff() to use schedule_work()
        mm/hugetlb: fix total hugetlbfs pages count when using memory overcommit accouting
        printk: Provide a wake_up_klogd() off-case
        irq_work.h: fix warning when CONFIG_IRQ_WORK=n
      14629ed3
    • Vladimir Davydov's avatar
      mqueue: sys_mq_open: do not call mnt_drop_write() if read-only · 38d78e58
      Vladimir Davydov authored
      mnt_drop_write() must be called only if mnt_want_write() succeeded,
      otherwise the mnt_writers counter will diverge.
      
      mnt_writers counters are used to check if remounting FS as read-only is
      OK, so after an extra mnt_drop_write() call, it would be impossible to
      remount mqueue FS as read-only.  Besides, on umount a warning would be
      printed like this one:
      
        =====================================
        [ BUG: bad unlock balance detected! ]
        3.9.0-rc3 #5 Not tainted
        -------------------------------------
        a.out/12486 is trying to release lock (sb_writers) at:
        mnt_drop_write+0x1f/0x30
        but there are no more locks to release!
      Signed-off-by: default avatarVladimir Davydov <vdavydov@parallels.com>
      Cc: Doug Ledford <dledford@redhat.com>
      Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Cc: "Eric W. Biederman" <ebiederm@xmission.com>
      Cc: Al Viro <viro@zeniv.linux.org.uk>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      38d78e58
    • Jianguo Wu's avatar
      mm/hotplug: only free wait_table if it's allocated by vmalloc · ca4b3f30
      Jianguo Wu authored
      zone->wait_table may be allocated from bootmem, it can not be freed.
      Signed-off-by: default avatarJianguo Wu <wujianguo@huawei.com>
      Reviewed-by: default avatarTang Chen <tangchen@cn.fujitsu.com>
      Cc: Tang Chen <tangchen@cn.fujitsu.com>
      Cc: Jiang Liu <jiang.liu@huawei.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      ca4b3f30
    • Alexander Duyck's avatar
      dma-debug: update DMA debug API to better handle multiple mappings of a buffer · 96e7d7a1
      Alexander Duyck authored
      There were reports of the igb driver unmapping buffers without calling
      dma_mapping_error.  On closer inspection issues were found in the DMA
      debug API and how it handled multiple mappings of the same buffer.
      
      The issue I found is the fact that the debug_dma_mapping_error would
      only set the map_err_type to MAP_ERR_CHECKED in the case that the was
      only one match for device and device address.  However in the case of
      non-IOMMU, multiple addresses existed and as a result it was not setting
      this field once a second mapping was instantiated.  I have resolved this
      by changing the search so that it instead will now set MAP_ERR_CHECKED
      on the first buffer that matches the device and DMA address that is
      currently in the state MAP_ERR_NOT_CHECKED.
      
      A secondary side effect of this patch is that in the case of multiple
      buffers using the same address only the last mapping will have a valid
      map_err_type.  The previous mappings will all end up with map_err_type
      set to MAP_ERR_CHECKED because of the dma_mapping_error call in
      debug_dma_map_page.  However this behavior may be preferable as it means
      you will likely only see one real error per multi-mapped buffer, versus
      the current behavior of multiple false errors mer multi-mapped buffer.
      Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@intel.com>
      Cc: Joerg Roedel <joro@8bytes.org>
      Reviewed-by: default avatarShuah Khan <shuah.khan@hp.com>
      Tested-by: default avatarShuah Khan <shuah.khan@hp.com>
      Cc: Jakub Kicinski <kubakici@wp.pl>
      Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      96e7d7a1
    • Alexander Duyck's avatar
      dma-debug: fix locking bug in check_unmap() · 8d640a51
      Alexander Duyck authored
      In check_unmap() it is possible to get into a dead-locked state if
      dma_mapping_error is called.  The problem is that the bucket is locked in
      check_unmap, and locked again by debug_dma_mapping_error which is called
      by dma_mapping_error.  To resolve that we must release the lock on the
      bucket before making the call to dma_mapping_error.
      
      [akpm@linux-foundation.org: restore 80-col trickery to be consistent with the rest of the file]
      Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@intel.com>
      Cc: Joerg Roedel <joro@8bytes.org>
      Reviewed-by: default avatarShuah Khan <shuah.khan@hp.com>
      Tested-by: default avatarShuah Khan <shuah.khan@hp.com>
      Cc: Jakub Kicinski <kubakici@wp.pl>
      Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      8d640a51
    • Nicolas Ferre's avatar
      drivers/rtc/rtc-at91rm9200.c: use a variable for storing IMR · 0ef1594c
      Nicolas Ferre authored
      On some revisions of AT91 SoCs, the RTC IMR register is not working.
      Instead of elaborating a workaround for that specific SoC or IP version,
      we simply use a software variable to store the Interrupt Mask Register
      and modify it for each enabling/disabling of an interrupt.  The overhead
      of this is negligible anyway.
      
      The interrupt mask register (IMR) for the RTC is broken on the AT91SAM9x5
      sub-family of SoCs (good overview of the members here:
      http://www.eewiki.net/display/linuxonarm/AT91SAM9x5 ).  The "user visible
      effect" is the RTC doesn't work.
      
      That sub-family is less than two years old and only has devicetree (DT)
      support and came online circa lk 3.7 .  The dust is yet to settle on the
      DT stuff at least for AT91 SoCs (translation: lots of stuff is still
      broken, so much that it is hard to know where to start).
      
      The fix in the patch is pretty simple: just shadow the silicon IMR
      register with a variable in the driver.  Some older SoCs (pre-DT) use the
      the rtc-at91rm9200 driver (e.g.  obviously the AT91RM9200) and they should
      not be impacted by the change.  There shouldn't be a large volume of
      interrupts associated with a RTC.
      Signed-off-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
      Reported-by: default avatarDouglas Gilbert <dgilbert@interlog.com>
      Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
      Cc: Ludovic Desroches <ludovic.desroches@atmel.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      0ef1594c
    • H Hartley Sweeten's avatar
      drivers/video/ep93xx-fb.c: include <linux/io.h> for devm_ioremap() · e66b0587
      H Hartley Sweeten authored
      Commit be867814 ("drivers/video/ep93xx-fb.c: use devm_ functions")
      introduced a build error:
      
        drivers/video/ep93xx-fb.c: In function 'ep93xxfb_probe':
        drivers/video/ep93xx-fb.c:532: error: implicit declaration of function 'devm_ioremap'
        drivers/video/ep93xx-fb.c:533: warning: assignment makes pointer from integer without a cast
      
      Include <linux/io.h> to pickup the declaration of 'devm_ioremap'.
      Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
      Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
      Acked-by: default avatarRyan Mallon <rmallon@gmail.com>
      Cc: Damien Cassou <damien.cassou@lifl.fr>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      e66b0587
    • Ashish Jangam's avatar
      drivers/rtc/rtc-da9052.c: fix for rtc device registration · 925e8ea6
      Ashish Jangam authored
      Add support for the virtual irq since now MFD only handles virtual irq
      Without this patch rtc device will fail in registration.
      
      (akpm: Ashish has a different version whcih will be needed for 3.8.x and
      earlier kernels)
      Signed-off-by: default avatarAshish <ashish.jangam@kpitcummins.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      925e8ea6
    • Russ Anderson's avatar
      mm: zone_end_pfn is too small · f9228b20
      Russ Anderson authored
      Booting with 32 TBytes memory hits BUG at mm/page_alloc.c:552! (output
      below).
      
      The key hint is "page 4294967296 outside zone".
      4294967296 = 0x100000000 (bit 32 is set).
      
      The problem is in include/linux/mmzone.h:
      
        530 static inline unsigned zone_end_pfn(const struct zone *zone)
        531 {
        532         return zone->zone_start_pfn + zone->spanned_pages;
        533 }
      
      zone_end_pfn is "unsigned" (32 bits).  Changing it to "unsigned long"
      (64 bits) fixes the problem.
      
      zone_end_pfn() was added recently in commit 108bcc96 ("mm: add & use
      zone_end_pfn() and zone_spans_pfn()")
      
      Output from the failure.
      
        No AGP bridge found
        page 4294967296 outside zone [ 4294967296 - 4327469056 ]
        ------------[ cut here ]------------
        kernel BUG at mm/page_alloc.c:552!
        invalid opcode: 0000 [#1] SMP
        Modules linked in:
        CPU 0
        Pid: 0, comm: swapper Not tainted 3.9.0-rc2.dtp+ #10
        RIP: free_one_page+0x382/0x430
        Process swapper (pid: 0, threadinfo ffffffff81942000, task ffffffff81955420)
        Call Trace:
          __free_pages_ok+0x96/0xb0
          __free_pages+0x25/0x50
          __free_pages_bootmem+0x8a/0x8c
          __free_memory_core+0xea/0x131
          free_low_memory_core_early+0x4a/0x98
          free_all_bootmem+0x45/0x47
          mem_init+0x7b/0x14c
          start_kernel+0x216/0x433
          x86_64_start_reservations+0x2a/0x2c
          x86_64_start_kernel+0x144/0x153
        Code: 89 f1 ba 01 00 00 00 31 f6 d3 e2 4c 89 ef e8 66 a4 01 00 e9 2c fe ff ff 0f 0b eb fe 0f 0b 66 66 2e 0f 1f 84 00 00 00 00 00 eb f3 <0f> 0b eb fe 0f 0b 0f 1f 84 00 00 00 00 00 eb f6 0f 0b eb fe 49
      Signed-off-by: default avatarRuss Anderson <rja@sgi.com>
      Reported-by: default avatarGeorge Beshers <gbeshers@sgi.com>
      Acked-by: default avatarHedi Berriche <hedi@sgi.com>
      Cc: Cody P Schafer <cody@linux.vnet.ibm.com>
      Cc: Michal Hocko <mhocko@suse.cz>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      f9228b20
    • Oleg Nesterov's avatar
      poweroff: change orderly_poweroff() to use schedule_work() · 2ca067ef
      Oleg Nesterov authored
      David said:
      
          Commit 6c0c0d4d ("poweroff: fix bug in orderly_poweroff()")
          apparently fixes one bug in orderly_poweroff(), but introduces
          another.  The comments on orderly_poweroff() claim it can be called
          from any context - and indeed we call it from interrupt context in
          arch/powerpc/platforms/pseries/ras.c for example.  But since that
          commit this is no longer safe, since call_usermodehelper_fns() is not
          safe in interrupt context without the UMH_NO_WAIT option.
      
      orderly_poweroff() can be used from any context but UMH_WAIT_EXEC is
      sleepable.  Move the "force" logic into __orderly_poweroff() and change
      orderly_poweroff() to use the global poweroff_work which simply calls
      __orderly_poweroff().
      
      While at it, remove the unneeded "int argc" and change argv_split() to
      use GFP_KERNEL.
      
      We use the global "bool poweroff_force" to pass the argument, this can
      obviously affect the previous request if it is pending/running.  So we
      only allow the "false => true" transition assuming that the pending
      "true" should succeed anyway.  If schedule_work() fails after that we
      know that work->func() was not called yet, it must see the new value.
      
      This means that orderly_poweroff() becomes async even if we do not run
      the command and always succeeds, schedule_work() can only fail if the
      work is already pending.  We can export __orderly_poweroff() and change
      the non-atomic callers which want the old semantics.
      Signed-off-by: default avatarOleg Nesterov <oleg@redhat.com>
      Reported-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      Reported-by: default avatarDavid Gibson <david@gibson.dropbear.id.au>
      Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi>
      Cc: Feng Hong <hongfeng@marvell.com>
      Cc: Kees Cook <keescook@chromium.org>
      Cc: Serge Hallyn <serge.hallyn@canonical.com>
      Cc: "Eric W. Biederman" <ebiederm@xmission.com>
      Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      2ca067ef
    • Wanpeng Li's avatar
      mm/hugetlb: fix total hugetlbfs pages count when using memory overcommit accouting · d0028588
      Wanpeng Li authored
      hugetlb_total_pages is used for overcommit calculations but the current
      implementation considers only the default hugetlb page size (which is
      either the first defined hugepage size or the one specified by
      default_hugepagesz kernel boot parameter).
      
      If the system is configured for more than one hugepage size, which is
      possible since commit a137e1cc ("hugetlbfs: per mount huge page
      sizes") then the overcommit estimation done by __vm_enough_memory()
      (resp.  shown by meminfo_proc_show) is not precise - there is an
      impression of more available/allowed memory.  This can lead to an
      unexpected ENOMEM/EFAULT resp.  SIGSEGV when memory is accounted.
      
      Testcase:
        boot: hugepagesz=1G hugepages=1
        the default overcommit ratio is 50
        before patch:
      
          egrep 'CommitLimit' /proc/meminfo
          CommitLimit:     55434168 kB
      
        after patch:
      
          egrep 'CommitLimit' /proc/meminfo
          CommitLimit:     54909880 kB
      
      [akpm@linux-foundation.org: coding-style tweak]
      Signed-off-by: default avatarWanpeng Li <liwanp@linux.vnet.ibm.com>
      Acked-by: default avatarMichal Hocko <mhocko@suse.cz>
      Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
      Cc: Hillf Danton <dhillf@gmail.com>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: <stable@vger.kernel.org>		[3.0+]
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      d0028588
    • Frederic Weisbecker's avatar
      printk: Provide a wake_up_klogd() off-case · dc72c32e
      Frederic Weisbecker authored
      wake_up_klogd() is useless when CONFIG_PRINTK=n because neither printk()
      nor printk_sched() are in use and there are actually no waiter on
      log_wait waitqueue.  It should be a stub in this case for users like
      bust_spinlocks().
      
      Otherwise this results in this warning when CONFIG_PRINTK=n and
      CONFIG_IRQ_WORK=n:
      
      	kernel/built-in.o In function `wake_up_klogd':
      	(.text.wake_up_klogd+0xb4): undefined reference to `irq_work_queue'
      
      To fix this, provide an off-case for wake_up_klogd() when
      CONFIG_PRINTK=n.
      
      There is much more from console_unlock() and other console related code
      in printk.c that should be moved under CONFIG_PRINTK.  But for now,
      focus on a minimal fix as we passed the merged window already.
      
      [akpm@linux-foundation.org: include printk.h in bust_spinlocks.c]
      Signed-off-by: default avatarFrederic Weisbecker <fweisbec@gmail.com>
      Reported-by: default avatarJames Hogan <james.hogan@imgtec.com>
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Ingo Molnar <mingo@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      dc72c32e
    • James Hogan's avatar
      irq_work.h: fix warning when CONFIG_IRQ_WORK=n · fe8d5261
      James Hogan authored
      A randconfig caught repeated compiler warnings when CONFIG_IRQ_WORK=n
      due to the definition of a non-inline static function in
      <linux/irq_work.h>:
      
        include/linux/irq_work.h +40 : warning: 'irq_work_needs_cpu' defined but not used
      
      Make it inline to supress the warning.  This is caused commit
      00b42959 ("irq_work: Don't stop the tick with pending works") merged
      in v3.9-rc1.
      Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
      Signed-off-by: default avatarFrederic Weisbecker <fweisbec@gmail.com>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Ingo Molnar <mingo@kernel.org>
      Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      fe8d5261
    • Takahisa Tanaka's avatar
      watchdog: sp5100_tco: Set the AcpiMmioSel bitmask value to 1 instead of 2 · 81fc933f
      Takahisa Tanaka authored
      The AcpiMmioSel bit is bit 1 in the AcpiMmioEn register, but the current
      sp5100_tco driver is using bit 2.
      
      See 2.3.3 Power Management (PM) Registers page 150 of the
      AMD SB800-Series Southbridges Register Reference Guide [1].
      
              AcpiMmioEn - RW – 8/16/32 bits - [PM_Reg: 24h]
              Field Name        Bits  Default  Description
              AcpiMMioDecodeEn  0     0b       Set to 1 to enable AcpiMMio space.
              AcpiMMIoSel       1     0b       Set AcpiMMio registers to be memory-mapped or IO-mapped space.
                                               0: Memory-mapped space
                                               1: I/O-mapped space
      
      The sp5100_tco driver expects zero as a value of AcpiMmioSel (bit 1).
      
      Fortunately, no problems were caused by this typo, because the default
      value of the undocumented misused bit 2 seems to be zero.
      
      However, the sp5100_tco driver should use the correct bitmask value.
      
      [1] http://support.amd.com/us/Embedded_TechDocs/45482.pdfSigned-off-by: default avatarTakahisa Tanaka <mc74hc00@gmail.com>
      Signed-off-by: default avatarPaul Menzel <paulepanter@users.sourceforge.net>
      Signed-off-by: default avatarWim Van Sebroeck <wim@iguana.be>
      Cc: stable <stable@vger.kernel.org>
      81fc933f