- 17 Nov, 2020 1 commit
-
-
Vinod Koul authored
This reverts commit 3cc8e867 ("phy: amlogic: Replace devm_reset_control_array_get()") as it caused build failure drivers/soc/amlogic/meson-ee-pwrc.c: In function 'meson_ee_pwrc_init_domain': drivers/soc/amlogic/meson-ee-pwrc.c:416:65: error: expected ';' before 'if' Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Vinod Koul <vkoul@kernel.org>
-
- 16 Nov, 2020 27 commits
-
-
Jon Hunter authored
Deferred probe is an expected return value for devm_regulator_bulk_get(). Given that the driver deals with it properly, there's no need to output a warning that may potentially confuse users. Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Acked-by:
Thierry Reding <treding@nvidia.com> Acked-by:
JC Kuo <jckuo@nvidia.com> Link: https://lore.kernel.org/r/20201111103708.152566-1-jonathanh@nvidia.comSigned-off-by:
-
Florian Fainelli authored
Read the 'brcm,tx-amplitude-millivolt' property from Device Tree and propagate its value into the appropriate test transmit register to change the TX amplitude. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20201022205056.233879-3-f.fainelli@gmail.comSigned-off-by:
-
Florian Fainelli authored
Document a new property which allows the selection of the SATA AFE TX amplitude in milli Volts. Possible values are 400, 500, 600 and 800mV. Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Amelie Delaunay authored
Change stm32-usbphyc driver to defer its probe when the expected reset control has its probe operation deferred. Signed-off-by:
Etienne Carriere <etienne.carriere@st.com> Signed-off-by:
Amelie Delaunay <amelie.delaunay@st.com> Link: https://lore.kernel.org/r/20201110102305.27205-2-amelie.delaunay@st.comSigned-off-by:
-
Amelie Delaunay authored
Change stm32-usbphyc driver to not print an error message when the device probe operation is deferred. Signed-off-by:
-
Rikard Falkeborn authored
The only usage of tegra_xusb_pad_type and tegra_xusb_port_type is to assign their address to the type field in the device struct, which is a const pointer. Make them const to allow the compiler to put them in read-only memory. Signed-off-by:
Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20201109215844.167954-1-rikard.falkeborn@gmail.comSigned-off-by:
-
Yejune Deng authored
devm_reset_control_array_get_exclusive() looks more readable Signed-off-by:
Yejune Deng <yejune.deng@gmail.com> Reviewed-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/1604378274-6860-1-git-send-email-yejune.deng@gmail.comSigned-off-by:
-
Swapnil Jakhade authored
Add Cadence Sierra PHY bindings in YAML format. Signed-off-by:
Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by:
-
Chunfeng Yun authored
Use devm_platform_ioremap_resource(_byname) to simplify code Signed-off-by:
Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1604642930-29019-17-git-send-email-chunfeng.yun@mediatek.comSigned-off-by:
-
Chunfeng Yun authored
Use devm_platform_ioremap_resource(_byname) to simplify code Signed-off-by:
-
Chunfeng Yun authored
Use devm_platform_ioremap_resource to simplify code Signed-off-by:
-
Chunfeng Yun authored
Use devm_platform_ioremap_resource to simplify code Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/1604642930-29019-14-git-send-email-chunfeng.yun@mediatek.comSigned-off-by:
-
Chunfeng Yun authored
Use devm_platform_ioremap_resource to simplify code Signed-off-by:
-
Chunfeng Yun authored
Use devm_platform_ioremap_resource to simplify code Signed-off-by:
-
Chunfeng Yun authored
Use devm_platform_ioremap_resource to simplify code Signed-off-by:
-
Chunfeng Yun authored
Use devm_platform_ioremap_resource(_byname) to simplify code Signed-off-by:
-
Chunfeng Yun authored
Use devm_platform_ioremap_resource to simplify code Signed-off-by:
-
Chunfeng Yun authored
Use devm_platform_ioremap_resource to simplify code Signed-off-by:
-
Chunfeng Yun authored
Use devm_platform_ioremap_resource to simplify code Signed-off-by:
Jisheng Zhang <Jisheng.Zhang@synaptics.com> Link: https://lore.kernel.org/r/1604642930-29019-7-git-send-email-chunfeng.yun@mediatek.comSigned-off-by:
-
Chunfeng Yun authored
Use devm_platform_ioremap_resource to simplify code Signed-off-by:
-
Chunfeng Yun authored
Use devm_platform_ioremap_resource to simplify code Signed-off-by:
Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/1604642930-29019-5-git-send-email-chunfeng.yun@mediatek.comSigned-off-by:
-
Chunfeng Yun authored
Use devm_platform_ioremap_resource to simplify code Signed-off-by:
-
Chunfeng Yun authored
Use devm_platform_ioremap_resource(_byname) to simplify code Signed-off-by:
-
Chunfeng Yun authored
Use devm_platform_ioremap_resource to simplify code Signed-off-by:
Remi Pommarel <repk@triplefau.lt> Reviewed-by:
-
Chunfeng Yun authored
Use devm_platform_ioremap_resource(_byname) to simplify code Signed-off-by:
-
Manivannan Sadhasivam authored
SM8250 has multiple different PHY versions: QMP GEN3x1 PHY - 1 lane QMP GEN3x2 PHY - 2 lanes QMP Modem PHY - 2 lanes Add support for these with relevant init sequence. In order to abstract the init sequence, this commit introduces secondary tables which can be used to factor out the unique sequence for each PHY while the former tables can have the common sequence. Signed-off-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20201027170033.8475-3-manivannan.sadhasivam@linaro.orgSigned-off-by:
-
Manivannan Sadhasivam authored
Add the below three PCIe PHYs found in SM8250 to the QMP binding: QMP GEN3x1 PHY - 1 lane QMP GEN3x2 PHY - 2 lanes QMP Modem PHY - 2 lanes Signed-off-by:
-
- 02 Nov, 2020 3 commits
-
-
Lubomir Rintel authored
Add PHY driver for the HSICs found on Marvell MMP3 SoC. The driver is rather straightforward -- the PHY essentially just needs to be enabled. Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/20200925235828.228626-4-lkundrak@v3.skSigned-off-by:
-
Lubomir Rintel authored
I wrote this binding and I'm fine with it being GPL + BSD dual-licensed, as is recommended for new DT bindings. Signed-off-by:
-
Lubomir Rintel authored
This has been added in error -- the PHY block doesn't have a reset pin. Signed-off-by:
-
- 28 Oct, 2020 2 commits
-
-
Robert Marko authored
Add maintainers entry for the Qualcomm IPQ4019 USB PHY driver. Signed-off-by:
Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Link: https://lore.kernel.org/r/20201016204610.2406075-1-robert.marko@sartura.hrSigned-off-by:
-
Rikard Falkeborn authored
The only usage of imx8mp_usb_phy_ops is to assign its address to the data field in the of_device_id struct, which is a const void pointer. Make it const to allow the compiler to put it in read-only memory. Signed-off-by:
-
- 25 Oct, 2020 7 commits
-
-
Linus Torvalds authored
-
Joe Perches authored
Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.plSigned-off-by:Joe Perches <joe@perches.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by:
Miguel Ojeda <ojeda@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Rasmus Villemoes authored
tid_addr is not a "pointer to (pointer to int in userspace)"; it is in fact a "pointer to (pointer to int in userspace) in userspace". So sparse rightfully complains about passing a kernel pointer to put_user(). Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
-
Eric Biggers authored
Commit 453431a5 ("mm, treewide: rename kzfree() to kfree_sensitive()") renamed kzfree() to kfree_sensitive(), but it left a compatibility definition of kzfree() to avoid being too disruptive. Since then a few more instances of kzfree() have slipped in. Just get rid of them and remove the compatibility definition once and for all. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Joe Perches authored
If set, use the environment variable GIT_DIR to change the default .git location of the kernel git tree. If GIT_DIR is unset, keep using the current ".git" default. Link: https://lkml.kernel.org/r/c5e23b45562373d632fccb8bc04e563abba4dd1d.camel@perches.comSigned-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "A time namespace fix and a matching selftest. The futex absolute timeouts which are based on CLOCK_MONOTONIC require time namespace corrected. This was missed in the original time namesapce support" * tag 'timers-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: selftests/timens: Add a test for futex() futex: Adjust absolute futex timeouts with per time namespace offset
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Thomas Gleixner: "Two scheduler fixes: - A trivial build fix for sched_feat() to compile correctly with CONFIG_JUMP_LABEL=n - Replace a zero lenght array with a flexible array" * tag 'sched-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/features: Fix !CONFIG_JUMP_LABEL case sched: Replace zero-length array with flexible-array
-
