commit 6994eefb upstream.

Fix two issues:

When called for PTRACE_TRACEME, ptrace_link() would obtain an RCU
reference to the parent's objective credentials, then give that pointer
to get_cred().  However, the object lifetime rules for things like
struct cred do not permit unconditionally turning an RCU reference into
a stable reference.

PTRACE_TRACEME records the parent's credentials as if the parent was
acting as the subject, but that's not the case.  If a malicious
unprivileged child uses PTRACE_TRACEME and the parent is privileged, and
at a later point, the parent process becomes attacker-controlled
(because it drops privileges and calls execve()), the attacker ends up
with control over two processes with a privileged ptrace relationship,
which can be abused to ptrace a suid binary and obtain root privileges.

Fix both of these by always recording the credentials of the process
that is requesting the creation of the ptrace relationship:
current_cred() can't change under us, and current is the proper subject
for access control.

This change is theoretically userspace-visible, but I am not aware of
any code that it will actually break.

Fixes: 64b875f7 ("ptrace: Capture the ptracer's creds not PT_PTRACE_CAP")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bc7b488b upstream.

While loading the DMC firmware we were double checking the headers made
sense, but in no place we checked that we were actually reading memory
we were supposed to. This could be wrong in case the firmware file is
truncated or malformed.

Before this patch:
	# ls -l /lib/firmware/i915/icl_dmc_ver1_07.bin
	-rw-r--r-- 1 root root  25716 Feb  1 12:26 icl_dmc_ver1_07.bin
	# truncate -s 25700 /lib/firmware/i915/icl_dmc_ver1_07.bin
	# modprobe i915
	# dmesg| grep -i dmc
	[drm:intel_csr_ucode_init [i915]] Loading i915/icl_dmc_ver1_07.bin
	[drm] Finished loading DMC firmware i915/icl_dmc_ver1_07.bin (v1.7)

i.e. it loads random data. Now it fails like below:
	[drm:intel_csr_ucode_init [i915]] Loading i915/icl_dmc_ver1_07.bin
	[drm:csr_load_work_fn [i915]] *ERROR* Truncated DMC firmware, rejecting.
	i915 0000:00:02.0: Failed to load DMC firmware i915/icl_dmc_ver1_07.bin. Disabling runtime power management.
	i915 0000:00:02.0: DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915

Before reading any part of the firmware file, validate the input first.

Fixes: eb805623 ("drm/i915/skl: Add support to load SKL CSR firmware.")
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605235535.17791-1-lucas.demarchi@intel.com
(cherry picked from commit bc7b488b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
[ Lucas: backported to 4.9+ adjusting the context ]
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 04e03d9a ]

The mapper may be NULL when called from register_ftrace_function_probe()
with probe->data == NULL.

This issue can be reproduced as follow (it may be covered by compiler
optimization sometime):

/ # cat /sys/kernel/debug/tracing/set_ftrace_filter
#### all functions enabled ####
/ # echo foo_bar:dump > /sys/kernel/debug/tracing/set_ftrace_filter
[  206.949100] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[  206.952402] Mem abort info:
[  206.952819]   ESR = 0x96000006
[  206.955326]   Exception class = DABT (current EL), IL = 32 bits
[  206.955844]   SET = 0, FnV = 0
[  206.956272]   EA = 0, S1PTW = 0
[  206.956652] Data abort info:
[  206.957320]   ISV = 0, ISS = 0x00000006
[  206.959271]   CM = 0, WnR = 0
[  206.959938] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000419f3a000
[  206.960483] [0000000000000000] pgd=0000000411a87003, pud=0000000411a83003, pmd=0000000000000000
[  206.964953] Internal error: Oops: 96000006 [#1] SMP
[  206.971122] Dumping ftrace buffer:
[  206.973677]    (ftrace buffer empty)
[  206.975258] Modules linked in:
[  206.976631] Process sh (pid: 281, stack limit = 0x(____ptrval____))
[  206.978449] CPU: 10 PID: 281 Comm: sh Not tainted 5.2.0-rc1+ #17
[  206.978955] Hardware name: linux,dummy-virt (DT)
[  206.979883] pstate: 60000005 (nZCv daif -PAN -UAO)
[  206.980499] pc : free_ftrace_func_mapper+0x2c/0x118
[  206.980874] lr : ftrace_count_free+0x68/0x80
[  206.982539] sp : ffff0000182f3ab0
[  206.983102] x29: ffff0000182f3ab0 x28: ffff8003d0ec1700
[  206.983632] x27: ffff000013054b40 x26: 0000000000000001
[  206.984000] x25: ffff00001385f000 x24: 0000000000000000
[  206.984394] x23: ffff000013453000 x22: ffff000013054000
[  206.984775] x21: 0000000000000000 x20: ffff00001385fe28
[  206.986575] x19: ffff000013872c30 x18: 0000000000000000
[  206.987111] x17: 0000000000000000 x16: 0000000000000000
[  206.987491] x15: ffffffffffffffb0 x14: 0000000000000000
[  206.987850] x13: 000000000017430e x12: 0000000000000580
[  206.988251] x11: 0000000000000000 x10: cccccccccccccccc
[  206.988740] x9 : 0000000000000000 x8 : ffff000013917550
[  206.990198] x7 : ffff000012fac2e8 x6 : ffff000012fac000
[  206.991008] x5 : ffff0000103da588 x4 : 0000000000000001
[  206.991395] x3 : 0000000000000001 x2 : ffff000013872a28
[  206.991771] x1 : 0000000000000000 x0 : 0000000000000000
[  206.992557] Call trace:
[  206.993101]  free_ftrace_func_mapper+0x2c/0x118
[  206.994827]  ftrace_count_free+0x68/0x80
[  206.995238]  release_probe+0xfc/0x1d0
[  206.995555]  register_ftrace_function_probe+0x4a8/0x868
[  206.995923]  ftrace_trace_probe_callback.isra.4+0xb8/0x180
[  206.996330]  ftrace_dump_callback+0x50/0x70
[  206.996663]  ftrace_regex_write.isra.29+0x290/0x3a8
[  206.997157]  ftrace_filter_write+0x44/0x60
[  206.998971]  __vfs_write+0x64/0xf0
[  206.999285]  vfs_write+0x14c/0x2f0
[  206.999591]  ksys_write+0xbc/0x1b0
[  206.999888]  __arm64_sys_write+0x3c/0x58
[  207.000246]  el0_svc_common.constprop.0+0x408/0x5f0
[  207.000607]  el0_svc_handler+0x144/0x1c8
[  207.000916]  el0_svc+0x8/0xc
[  207.003699] Code: aa0003f8 a9025bf5 aa0103f5 f946ea80 (f9400303)
[  207.008388] ---[ end trace 7b6d11b5f542bdf1 ]---
[  207.010126] Kernel panic - not syncing: Fatal exception
[  207.011322] SMP: stopping secondary CPUs
[  207.013956] Dumping ftrace buffer:
[  207.014595]    (ftrace buffer empty)
[  207.015632] Kernel Offset: disabled
[  207.017187] CPU features: 0x002,20006008
[  207.017985] Memory Limit: none
[  207.019825] ---[ end Kernel panic - not syncing: Fatal exception ]---

Link: http://lkml.kernel.org/r/20190606031754.10798-1-liwei391@huawei.comSigned-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 9f255b63 ]

It's possible for livepatch and ftrace to be toggling a module's text
permissions at the same time, resulting in the following panic:

  BUG: unable to handle page fault for address: ffffffffc005b1d9
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0003) - permissions violation
  PGD 3ea0c067 P4D 3ea0c067 PUD 3ea0e067 PMD 3cc13067 PTE 3b8a1061
  Oops: 0003 [#1] PREEMPT SMP PTI
  CPU: 1 PID: 453 Comm: insmod Tainted: G           O  K   5.2.0-rc1-a188339c #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-20181126_142135-anatol 04/01/2014
  RIP: 0010:apply_relocate_add+0xbe/0x14c
  Code: fa 0b 74 21 48 83 fa 18 74 38 48 83 fa 0a 75 40 eb 08 48 83 38 00 74 33 eb 53 83 38 00 75 4e 89 08 89 c8 eb 0a 83 38 00 75 43 <89> 08 48 63 c1 48 39 c8 74 2e eb 48 83 38 00 75 32 48 29 c1 89 08
  RSP: 0018:ffffb223c00dbb10 EFLAGS: 00010246
  RAX: ffffffffc005b1d9 RBX: 0000000000000000 RCX: ffffffff8b200060
  RDX: 000000000000000b RSI: 0000004b0000000b RDI: ffff96bdfcd33000
  RBP: ffffb223c00dbb38 R08: ffffffffc005d040 R09: ffffffffc005c1f0
  R10: ffff96bdfcd33c40 R11: ffff96bdfcd33b80 R12: 0000000000000018
  R13: ffffffffc005c1f0 R14: ffffffffc005e708 R15: ffffffff8b2fbc74
  FS:  00007f5f447beba8(0000) GS:ffff96bdff900000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: ffffffffc005b1d9 CR3: 000000003cedc002 CR4: 0000000000360ea0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   klp_init_object_loaded+0x10f/0x219
   ? preempt_latency_start+0x21/0x57
   klp_enable_patch+0x662/0x809
   ? virt_to_head_page+0x3a/0x3c
   ? kfree+0x8c/0x126
   patch_init+0x2ed/0x1000 [livepatch_test02]
   ? 0xffffffffc0060000
   do_one_initcall+0x9f/0x1c5
   ? kmem_cache_alloc_trace+0xc4/0xd4
   ? do_init_module+0x27/0x210
   do_init_module+0x5f/0x210
   load_module+0x1c41/0x2290
   ? fsnotify_path+0x3b/0x42
   ? strstarts+0x2b/0x2b
   ? kernel_read+0x58/0x65
   __do_sys_finit_module+0x9f/0xc3
   ? __do_sys_finit_module+0x9f/0xc3
   __x64_sys_finit_module+0x1a/0x1c
   do_syscall_64+0x52/0x61
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

The above panic occurs when loading two modules at the same time with
ftrace enabled, where at least one of the modules is a livepatch module:

CPU0					CPU1
klp_enable_patch()
  klp_init_object_loaded()
    module_disable_ro()
    					ftrace_module_enable()
					  ftrace_arch_code_modify_post_process()
				    	    set_all_modules_text_ro()
      klp_write_object_relocations()
        apply_relocate_add()
	  *patches read-only code* - BOOM

A similar race exists when toggling ftrace while loading a livepatch
module.

Fix it by ensuring that the livepatch and ftrace code patching
operations -- and their respective permissions changes -- are protected
by the text_mutex.

Link: http://lkml.kernel.org/r/ab43d56ab909469ac5d2520c5d944ad6d4abd476.1560474114.git.jpoimboe@redhat.comReported-by: Johannes Erdfelt <johannes@erdfelt.com>
Fixes: 444d13ff ("modules: add ro_after_init support")
Acked-by: Jessica Yu <jeyu@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit cbdaeaf0 ]

Selecting HAVE_NOP_MCOUNT enables -mnop-mcount (if gcc supports it)
and sets CC_USING_NOP_MCOUNT. Reuse __is_defined (which is suitable for
testing CC_USING_* defines) to avoid conditional compilation and fix
the following gcc 9 warning on s390:

kernel/trace/ftrace.c:2514:1: warning: ‘ftrace_code_disable’ defined
but not used [-Wunused-function]

Link: http://lkml.kernel.org/r/patch.git-1a82d13f33ac.your-ad-here.call-01559732716-ext-6629@work.hours

Fixes: 2f4df001 ("tracing: Add -mcount-nop option support")
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 0874bb49 ]

On a 64-bit machine the value of "vma->vm_end - vma->vm_start" may be
negative when using 32 bit ints and the "count >> PAGE_SHIFT"'s result
will be wrong.  So change the local variable and return value to
unsigned long to fix the problem.

Link: http://lkml.kernel.org/r/20190513023701.83056-1-swkhack@gmail.com
Fixes: 0cf2f6f6 ("mm: mlock: check against vma for actual mlock() size")
Signed-off-by: swkhack <swkhack@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c04e32e9 ]

At least for ARM64 kernels compiled with the crosstoolchain from
Debian/stretch or with the toolchain from kernel.org the line number is
not decoded correctly by 'decode_stacktrace.sh':

  $ echo "[  136.513051]  f1+0x0/0xc [kcrash]" | \
    CROSS_COMPILE=/opt/gcc-8.1.0-nolibc/aarch64-linux/bin/aarch64-linux- \
   ./scripts/decode_stacktrace.sh /scratch/linux-arm64/vmlinux \
                                  /scratch/linux-arm64 \
                                  /nfs/debian/lib/modules/4.20.0-devel
  [  136.513051] f1 (/linux/drivers/staging/kcrash/kcrash.c:68) kcrash

If addr2line from the toolchain is used the decoded line number is correct:

  [  136.513051] f1 (/linux/drivers/staging/kcrash/kcrash.c:57) kcrash

Link: http://lkml.kernel.org/r/20190527083425.3763-1-manut@linutronix.deSigned-off-by: Manuel Traut <manut@linutronix.de>
Acked-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d477f8c2 ]

In the case that a process is constrained by taskset(1) (i.e.
sched_setaffinity(2)) to a subset of available cpus, and all of those are
subsequently offlined, the scheduler will set tsk->cpus_allowed to
the current value of task_cs(tsk)->effective_cpus.

This is done via a call to do_set_cpus_allowed() in the context of
cpuset_cpus_allowed_fallback() made by the scheduler when this case is
detected. This is the only call made to cpuset_cpus_allowed_fallback()
in the latest mainline kernel.

However, this is not sane behavior.

I will demonstrate this on a system running the latest upstream kernel
with the following initial configuration:

	# grep -i cpu /proc/$$/status
	Cpus_allowed:	ffffffff,fffffff
	Cpus_allowed_list:	0-63

(Where cpus 32-63 are provided via smt.)

If we limit our current shell process to cpu2 only and then offline it
and reonline it:

	# taskset -p 4 $$
	pid 2272's current affinity mask: ffffffffffffffff
	pid 2272's new affinity mask: 4

	# echo off > /sys/devices/system/cpu/cpu2/online
	# dmesg | tail -3
	[ 2195.866089] process 2272 (bash) no longer affine to cpu2
	[ 2195.872700] IRQ 114: no longer affine to CPU2
	[ 2195.879128] smpboot: CPU 2 is now offline

	# echo on > /sys/devices/system/cpu/cpu2/online
	# dmesg | tail -1
	[ 2617.043572] smpboot: Booting Node 0 Processor 2 APIC 0x4

We see that our current process now has an affinity mask containing
every cpu available on the system _except_ the one we originally
constrained it to:

	# grep -i cpu /proc/$$/status
	Cpus_allowed:   ffffffff,fffffffb
	Cpus_allowed_list:      0-1,3-63

This is not sane behavior, as the scheduler can now not only place the
process on previously forbidden cpus, it can't even schedule it on
the cpu it was originally constrained to!

Other cases result in even more exotic affinity masks. Take for instance
a process with an affinity mask containing only cpus provided by smt at
the moment that smt is toggled, in a configuration such as the following:

	# taskset -p f000000000 $$
	# grep -i cpu /proc/$$/status
	Cpus_allowed:	000000f0,00000000
	Cpus_allowed_list:	36-39

A double toggle of smt results in the following behavior:

	# echo off > /sys/devices/system/cpu/smt/control
	# echo on > /sys/devices/system/cpu/smt/control
	# grep -i cpus /proc/$$/status
	Cpus_allowed:	ffffff00,ffffffff
	Cpus_allowed_list:	0-31,40-63

This is even less sane than the previous case, as the new affinity mask
excludes all smt-provided cpus with ids less than those that were
previously in the affinity mask, as well as those that were actually in
the mask.

With this patch applied, both of these cases end in the following state:

	# grep -i cpu /proc/$$/status
	Cpus_allowed:	ffffffff,ffffffff
	Cpus_allowed_list:	0-63

The original policy is discarded. Though not ideal, it is the simplest way
to restore sanity to this fallback case without reinventing the cpuset
wheel that rolls down the kernel just fine in cgroup v2. A user who wishes
for the previous affinity mask to be restored in this fallback case can use
that mechanism instead.

This patch modifies scheduler behavior by instead resetting the mask to
task_cs(tsk)->cpus_allowed by default, and cpu_possible mask in legacy
mode. I tested the cases above on both modes.

Note that the scheduler uses this fallback mechanism if and only if
_every_ other valid avenue has been traveled, and it is the last resort
before calling BUG().
Suggested-by: Waiman Long <longman@redhat.com>
Suggested-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Acked-by: Phil Auld <pauld@redhat.com>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a0cac264 ]

The devm_gpiod_request_gpiod() call will add "-gpios" to
any passed connection ID before looking it up.

I do not think the reset GPIO on this platform is named
"reset-gpios-gpios" but rather "reset-gpios" in the device
tree, so fix this up so that we get a proper reset GPIO
handle.

Also drop the inclusion of the legacy GPIO header.

Fixes: 0e8ce93b ("i2c: pca-platform: add devicetree awareness")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 8c2eb7b6 ]

Add devm_free_irq() call to mlxreg-hotplug remove() for clean release
of devices irq resource. Fix debugobjects warning triggered by rmmod
It prevents of use-after-free memory, related to
mlxreg_hotplug_work_handler.

Issue has been reported as debugobjects warning triggered by
'rmmod mlxtreg-hotplug' flow, while running kernel with
CONFIG_DEBUG_OBJECTS* options.

[ 2489.623551] ODEBUG: free active (active state 0) object type: work_struct hint: mlxreg_hotplug_work_handler+0x0/0x7f0 [mlxreg_hotplug]
[ 2489.637097] WARNING: CPU: 5 PID: 3924 at lib/debugobjects.c:328 debug_print_object+0xfe/0x180
[ 2489.637165] RIP: 0010:debug_print_object+0xfe/0x180
?
[ 2489.637214] Call Trace:
[ 2489.637225]  __debug_check_no_obj_freed+0x25e/0x320
[ 2489.637231]  kfree+0x82/0x110
[ 2489.637238]  release_nodes+0x33c/0x4e0
[ 2489.637242]  ? devres_remove_group+0x1b0/0x1b0
[ 2489.637247]  device_release_driver_internal+0x146/0x270
[ 2489.637251]  driver_detach+0x73/0xe0
[ 2489.637254]  bus_remove_driver+0xa1/0x170
[ 2489.637261]  __x64_sys_delete_module+0x29e/0x320
[ 2489.637265]  ? __ia32_sys_delete_module+0x320/0x320
[ 2489.637268]  ? blkcg_exit_queue+0x20/0x20
[ 2489.637273]  ? task_work_run+0x7d/0x100
[ 2489.637278]  ? exit_to_usermode_loop+0x5b/0xf0
[ 2489.637281]  do_syscall_64+0x73/0x160
[ 2489.637287]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 2489.637290] RIP: 0033:0x7f95c3596fd7

The difference in release flow with and with no devm_free_irq is listed
below:

bus: 'platform': remove driver mlxreg-hotplug
 mlxreg_hotplug_remove(start)
					-> devm_free_irq (with new code)
 mlxreg_hotplug_remove (end)
 release_nodes (start)
  mlxreg-hotplug: DEVRES REL devm_hwmon_release (8 bytes)
  device: 'hwmon3': device_unregister
  PM: Removing info for No Bus:hwmon3
  mlxreg-hotplug: DEVRES REL devm_kzalloc_release (88 bytes)
  mlxreg-hotplug: DEVRES REL devm_kzalloc_release (6 bytes)
  mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes)
  mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes)
  mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes)
  mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes)
  mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes)
  mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes)
  mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes)
  mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes)
  mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes)
  mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes)
  mlxreg-hotplug: DEVRES REL devm_irq_release (16 bytes) (no new code)
  mlxreg-hotplug: DEVRES REL devm_kzalloc_release (1376 bytes)
   ------------[ cut here ]------------ (no new code):
   ODEBUG: free active (active state 0) object type: work_struct hint: mlxreg_hotplug_work_handler

 release_nodes(end)
driver: 'mlxreg-hotplug': driver_release

Fixes: 1f976f69 ("platform/x86: Move Mellanox platform hotplug driver to platform/mellanox")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 160da20b ]

Fix the issue found while running kernel with the option
CONFIG_DEBUG_TEST_DRIVER_REMOVE.
Driver 'mlx-platform' registers 'i2c_mlxcpld' device and then registers
few underlying 'i2c-mux-reg' devices:
	priv->pdev_i2c = platform_device_register_simple("i2c_mlxcpld", nr,
							 NULL, 0);
	...
	for (i = 0; i < ARRAY_SIZE(mlxplat_mux_data); i++) {
		priv->pdev_mux[i] = platform_device_register_resndata(
						&mlxplat_dev->dev,
						"i2c-mux-reg", i, NULL,
						0, &mlxplat_mux_data[i],
						sizeof(mlxplat_mux_data[i]));

But actual parent of "i2c-mux-reg" device is priv->pdev_i2c->dev and
not mlxplat_dev->dev.
Patch fixes parent device parameter in a call to
platform_device_register_resndata() for "i2c-mux-reg".

It solves the race during initialization flow while 'i2c_mlxcpld.1' is
removing after probe, while 'i2c-mux-reg.0' is still in probing flow:
'i2c_mlxcpld.1'	flow:	probe -> remove -> probe.
'i2c-mux-reg.0'	flow:		  probe -> ...

[   12:621096] Registering platform device 'i2c_mlxcpld.1'. Parent at platform
[   12:621117] device: 'i2c_mlxcpld.1': device_add
[   12:621155] bus: 'platform': add device i2c_mlxcpld.1
[   12:621384] Registering platform device 'i2c-mux-reg.0'. Parent at mlxplat
[   12:621395] device: 'i2c-mux-reg.0': device_add
[   12:621425] bus: 'platform': add device i2c-mux-reg.0
[   12:621806] Registering platform device 'i2c-mux-reg.1'. Parent at mlxplat
[   12:621828] device: 'i2c-mux-reg.1': device_add
[   12:621892] bus: 'platform': add device i2c-mux-reg.1
[   12:621906] bus: 'platform': add driver i2c_mlxcpld
[   12:621996] bus: 'platform': driver_probe_device: matched device i2c_mlxcpld.1 with driver i2c_mlxcpld
[   12:622003] bus: 'platform': really_probe: probing driver i2c_mlxcpld with device i2c_mlxcpld.1
[   12:622100] i2c_mlxcpld i2c_mlxcpld.1: no default pinctrl state
[   12:622293] device: 'i2c-1': device_add
[   12:627280] bus: 'i2c': add device i2c-1
[   12:627692] device: 'i2c-1': device_add
[   12.629639] bus: 'platform': add driver i2c-mux-reg
[   12.629718] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.0 with driver i2c-mux-reg
[   12.629723] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.0
[   12.629818] i2c-mux-reg i2c-mux-reg.0: no default pinctrl state
[   12.629981] platform i2c-mux-reg.0: Driver i2c-mux-reg requests probe deferral
[   12.629986] platform i2c-mux-reg.0: Added to deferred list
[   12.629992] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.1 with driver i2c-mux-reg
[   12.629997] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.1
[   12.630091] i2c-mux-reg i2c-mux-reg.1: no default pinctrl state
[   12.630247] platform i2c-mux-reg.1: Driver i2c-mux-reg requests probe deferral
[   12.630252] platform i2c-mux-reg.1: Added to deferred list
[   12.640892] devices_kset: Moving i2c-mux-reg.0 to end of list
[   12.640900] platform i2c-mux-reg.0: Retrying from deferred list
[   12.640911] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.0 with driver i2c-mux-reg
[   12.640919] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.0
[   12.640999] i2c-mux-reg i2c-mux-reg.0: no default pinctrl state
[   12.641177] platform i2c-mux-reg.0: Driver i2c-mux-reg requests probe deferral
[   12.641187] platform i2c-mux-reg.0: Added to deferred list
[   12.641198] devices_kset: Moving i2c-mux-reg.1 to end of list
[   12.641219] platform i2c-mux-reg.1: Retrying from deferred list
[   12.641237] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.1 with driver i2c-mux-reg
[   12.641247] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.1
[   12.641331] i2c-mux-reg i2c-mux-reg.1: no default pinctrl state
[   12.641465] platform i2c-mux-reg.1: Driver i2c-mux-reg requests probe deferral
[   12.641469] platform i2c-mux-reg.1: Added to deferred list
[   12.646427] device: 'i2c-1': device_add
[   12.646647] bus: 'i2c': add device i2c-1
[   12.647104] device: 'i2c-1': device_add
[   12.669231] devices_kset: Moving i2c-mux-reg.0 to end of list
[   12.669240] platform i2c-mux-reg.0: Retrying from deferred list
[   12.669258] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.0 with driver i2c-mux-reg
[   12.669263] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.0
[   12.669343] i2c-mux-reg i2c-mux-reg.0: no default pinctrl state
[   12.669585] device: 'i2c-2': device_add
[   12.669795] bus: 'i2c': add device i2c-2
[   12.670201] device: 'i2c-2': device_add
[   12.671427] i2c i2c-1: Added multiplexed i2c bus 2
[   12.671514] device: 'i2c-3': device_add
[   12.671724] bus: 'i2c': add device i2c-3
[   12.672136] device: 'i2c-3': device_add
[   12.673378] i2c i2c-1: Added multiplexed i2c bus 3
[   12.673472] device: 'i2c-4': device_add
[   12.673676] bus: 'i2c': add device i2c-4
[   12.674060] device: 'i2c-4': device_add
[   12.675861] i2c i2c-1: Added multiplexed i2c bus 4
[   12.675941] device: 'i2c-5': device_add
[   12.676150] bus: 'i2c': add device i2c-5
[   12.676550] device: 'i2c-5': device_add
[   12.678103] i2c i2c-1: Added multiplexed i2c bus 5
[   12.678193] device: 'i2c-6': device_add
[   12.678395] bus: 'i2c': add device i2c-6
[   12.678774] device: 'i2c-6': device_add
[   12.679969] i2c i2c-1: Added multiplexed i2c bus 6
[   12.680065] device: 'i2c-7': device_add
[   12.680275] bus: 'i2c': add device i2c-7
[   12.680913] device: 'i2c-7': device_add
[   12.682506] i2c i2c-1: Added multiplexed i2c bus 7
[   12.682600] device: 'i2c-8': device_add
[   12.682808] bus: 'i2c': add device i2c-8
[   12.683189] device: 'i2c-8': device_add
[   12.683907] device: 'i2c-1': device_unregister
[   12.683945] device: 'i2c-1': device_unregister
[   12.684387] device: 'i2c-1': device_create_release
[   12.684536] bus: 'i2c': remove device i2c-1
[   12.686019] i2c i2c-8: Failed to create compatibility class link
[   12.686086] ------------[ cut here ]------------
[   12.686087] can't create symlink to mux device
[   12.686224] Workqueue: events deferred_probe_work_func
[   12.686135] WARNING: CPU: 7 PID: 436 at drivers/i2c/i2c-mux.c:416 i2c_mux_add_adapter+0x729/0x7d0 [i2c_mux]
[   12.686232] RIP: 0010:i2c_mux_add_adapter+0x729/0x7d0 [i2c_mux]
[   0x190/0x190 [i2c_mux]
[   12.686300]  ? i2c_mux_alloc+0xac/0x110 [i2c_mux]
[   12.686306]  ? i2c_mux_reg_set+0x200/0x200 [i2c_mux_reg]
[   12.686313]  i2c_mux_reg_probe+0x22c/0x731 [i2c_mux_reg]
[   12.686322]  ? i2c_mux_reg_deselect+0x60/0x60 [i2c_mux_reg]
[   12.686346]  platform_drv_probe+0xa8/0x110
[   12.686351]  really_probe+0x185/0x720
[   12.686358]  driver_probe_device+0xdf/0x1f0
...
[   12.686522] i2c i2c-1: Added multiplexed i2c bus 8
[   12.686621] device: 'i2c-9': device_add
[   12.686626] kobject_add_internal failed for i2c-9 (error: -2 parent: i2c-1)
[   12.694729] i2c-core: adapter 'i2c-1-mux (chan_id 8)': can't register device (-2)
[   12.705726] i2c i2c-1: failed to add mux-adapter 8 as bus 9 (error=-2)
[   12.714494] device: 'i2c-8': device_unregister
[   12.714537] device: 'i2c-8': device_unregister

Fixes: 6613d18e ("platform/x86: mlx-platform: Move module from arch/x86")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit cb1921b1 ]

When a switch event, such as tablet mode/laptop mode or docked/undocked,
wakes a device make sure that the value of the swich is reported.
Without when a device is put in tablet mode from laptop mode when it is
suspended or vice versa the device will wake up but mode will be
incorrect.

Tested by suspending a device in laptop mode and putting it in tablet
mode, the device resumes and is in tablet mode. When suspending the
device in tablet mode and putting it in laptop mode the device resumes
and is in laptop mode.
Signed-off-by: Mathew King <mathewk@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 401fee81 ]

Commit 78f3ac76 ("platform/x86: asus-wmi: Tell the EC the OS will
handle the display off hotkey") causes the backlight to be permanently off
on various EeePC laptop models using the eeepc-wmi driver (Asus EeePC
1015BX, Asus EeePC 1025C).

The asus_wmi_set_devstate(ASUS_WMI_DEVID_BACKLIGHT, 2, NULL) call added
by that commit is made conditional in this commit and only enabled in
the quirk_entry structs in the asus-nb-wmi driver fixing the broken
display / backlight on various EeePC laptop models.

Cc: João Paulo Rechi Vita <jprvita@endlessm.com>
Fixes: 78f3ac76 ("platform/x86: asus-wmi: Tell the EC the OS will handle the display off hotkey")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 652b8b08 ]

GPD has done it again, make a nice device (good), use way too generic
DMI strings (bad) and use a portrait screen rotated 90 degrees (ugly).

Because of the too generic DMI strings this entry is also doing bios-date
matching, so the gpd_micropc data struct may very well need to be updated
with some extra bios-dates in the future.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524125759.14131-2-hdegoede@redhat.com
(cherry picked from commit f2f2bb60)
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 15abc711 ]

GPD has done it again, make a nice device (good), use way too generic
DMI strings (bad) and use a portrait screen rotated 90 degrees (ugly).

Because of the too generic DMI strings this entry is also doing bios-date
matching, so the gpd_pocket2 data struct may very well need to be updated
with some extra bios-dates in the future.

Changes in v2:
-Add one more known BIOS date to the list of BIOS dates

Cc: Jurgen Kramer <gtmkramer@xs4all.nl>
Reported-by: Jurgen Kramer <gtmkramer@xs4all.nl>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524125759.14131-1-hdegoede@redhat.com
(cherry picked from commit 6dab9102)
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 625d7d35 ]

- set ioaccel2_sg_element member 'chain_indicator' to IOACCEL2_LAST_SG for
  the last s/g element.

- set ioaccel2_sg_element member 'chain_indicator' to IOACCEL2_CHAIN when
  chaining.
Reviewed-by: Bader Ali - Saleh <bader.alisaleh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Matt Perricone <matt.perricone@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 04268bf2 ]

When we call snd_soc_component_set_jack(component, NULL, NULL) we should
set rt274->jack to passed jack, so when interrupt is triggered it calls
snd_soc_jack_report(rt274->jack, ...) with proper value.

This fixes problem in machine where in register, we call
snd_soc_register(component, &headset, NULL), which just calls
rt274_mic_detect via callback.
Now when machine driver is removed "headset" will be gone, so we
need to tell codec driver that it's gone with:
snd_soc_register(component, NULL, NULL), but we also need to be able
to handle NULL jack argument here gracefully.
If we don't set it to NULL, next time the rt274_irq runs it will call
snd_soc_jack_report with first argument being invalid pointer and there
will be Oops.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 6d647b73 ]

During the integration of HDaudio support, we changed the way in which
we get hdev in snd_hdac_ext_bus_device_init() to use one preallocated
with devm_kzalloc(), however it still left kfree(hdev) in
snd_hdac_ext_bus_device_exit(). It leads to oopses when trying to
rmmod and modprobe. Fix it, by just removing kfree call.

SOF also uses some of the snd_hdac_ functions for HDAudio support but
allocated the memory with kzalloc. A matching fix is provided
separately to align all users of the snd_hdac_ library.

Fixes: 6298542f ("ALSA: hdac: remove memory allocation from snd_hdac_ext_bus_device_init")
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit fbc318af ]

Gadget drivers may queue request in interrupt context. This would lead to
a descriptor allocation in that context. In that case we would hit
BUG_ON(in_interrupt()) in __get_vm_area_node.

Also remove the unnecessary cast.
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Tested-by: James Grant <jamesg@zaltys.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 62fd0e0a ]

There is no deallocation of fusb300->ep[i] elements, allocated at
fusb300_probe.

The patch adds deallocation of fusb300->ep array elements.
Signed-off-by: Young Xiao <92siuyang@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e35faeb6 ]

Add the CPUID model numbers of Icelake (ICL) desktop and server
processors to the Intel family list.

 [ Qiuxu: Sort the macros by model number. ]
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Cc: rui.zhang@intel.com
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190603134122.13853-1-kan.liang@linux.intel.comSigned-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f9927000 ]

Whilst testing the capture functionality of the i2s on the newer
SoCs it was noticed that the recording was somewhat distorted.
This was due to the offset not being set correctly on the receiver
side.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 7e46169a ]

Although not causing any noticeable issues, the mask for the
channel offset is covering too many bits.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5628c897 ]

The supported formats are S16_LE and S24_LE now. However, by datasheet
of max98090, S24_LE is only supported when it is in the right justified
mode. We should remove 24-bit format if it is not in that mode to avoid
triggering error.
Signed-off-by: Yu-Hsuan Hsu <yuhsuan@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 2458d9d6 ]

mtk_dsi_stop() should be called after mtk_drm_crtc_atomic_disable(), which
needs ovl irq for drm_crtc_wait_one_vblank(), since after mtk_dsi_stop() is
called, ovl irq will be disabled. If drm_crtc_wait_one_vblank() is called
after last irq, it will timeout with this message: "vblank wait timed out
on crtc 0". This happens sometimes when turning off the screen.

In drm_atomic_helper.c#disable_outputs(),
the calling sequence when turning off the screen is:

1. mtk_dsi_encoder_disable()
     --> mtk_output_dsi_disable()
       --> mtk_dsi_stop();  /* sometimes make vblank timeout in
                               atomic_disable */
       --> mtk_dsi_poweroff();
2. mtk_drm_crtc_atomic_disable()
     --> drm_crtc_wait_one_vblank();
     ...
       --> mtk_dsi_ddp_stop()
         --> mtk_dsi_poweroff();

mtk_dsi_poweroff() has reference count design, change to make
mtk_dsi_stop() called in mtk_dsi_poweroff() when refcount is 0.

Fixes: 0707632b ("drm/mediatek: update DSI sub driver flow for sending commands to panel")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a4cd1d2b ]

num_pipes is used for mutex created in mtk_drm_crtc_create(). If we
don't clear num_pipes count, when rebinding driver, the count will
be accumulated. From mtk_disp_mutex_get(), there can only be at most
10 mutex id. Clear this number so it starts from 0 in every rebind.

Fixes: 119f5173 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit cf49b24f ]

shutdown all CRTC when unbinding drm driver.

Fixes: 119f5173 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f0fd8483 ]

Unbinding components (i.e. mtk_dsi and mtk_disp_ovl/rdma/color) will
trigger master(mtk_drm)'s .unbind(), and currently mtk_drm's unbind
won't actually unbind components. During the next bind,
mtk_drm_kms_init() is called, and the components are added back.

.unbind() should call mtk_drm_kms_deinit() to unbind components.

And since component_master_del() in .remove() will trigger .unbind(),
which will also unregister device, it's fine to remove original functions
called here.

Fixes: 119f5173 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 8fd7a37b ]

detatch panel in mtk_dsi_destroy_conn_enc(), since .bind will try to
attach it again.

Fixes: 2e54c14e ("drm/mediatek: Add DSI sub driver")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5caaf29a ]

If spi_register_master fails in spi_bitbang_start
because device_add failure, We should return the
error code other than 0, otherwise calling
spi_bitbang_stop may trigger NULL pointer dereference
like this:

BUG: KASAN: null-ptr-deref in __list_del_entry_valid+0x45/0xd0
Read of size 8 at addr 0000000000000000 by task syz-executor.0/3661

CPU: 0 PID: 3661 Comm: syz-executor.0 Not tainted 5.1.0+ #28
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
 dump_stack+0xa9/0x10e
 ? __list_del_entry_valid+0x45/0xd0
 ? __list_del_entry_valid+0x45/0xd0
 __kasan_report+0x171/0x18d
 ? __list_del_entry_valid+0x45/0xd0
 kasan_report+0xe/0x20
 __list_del_entry_valid+0x45/0xd0
 spi_unregister_controller+0x99/0x1b0
 spi_lm70llp_attach+0x3ae/0x4b0 [spi_lm70llp]
 ? 0xffffffffc1128000
 ? klist_next+0x131/0x1e0
 ? driver_detach+0x40/0x40 [parport]
 port_check+0x3b/0x50 [parport]
 bus_for_each_dev+0x115/0x180
 ? subsys_dev_iter_exit+0x20/0x20
 __parport_register_driver+0x1f0/0x210 [parport]
 ? 0xffffffffc1150000
 do_one_initcall+0xb9/0x3b5
 ? perf_trace_initcall_level+0x270/0x270
 ? kasan_unpoison_shadow+0x30/0x40
 ? kasan_unpoison_shadow+0x30/0x40
 do_init_module+0xe0/0x330
 load_module+0x38eb/0x4270
 ? module_frob_arch_sections+0x20/0x20
 ? kernel_read_file+0x188/0x3f0
 ? find_held_lock+0x6d/0xd0
 ? fput_many+0x1a/0xe0
 ? __do_sys_finit_module+0x162/0x190
 __do_sys_finit_module+0x162/0x190
 ? __ia32_sys_init_module+0x40/0x40
 ? __mutex_unlock_slowpath+0xb4/0x3f0
 ? wait_for_completion+0x240/0x240
 ? vfs_write+0x160/0x2a0
 ? lockdep_hardirqs_off+0xb5/0x100
 ? mark_held_locks+0x1a/0x90
 ? do_syscall_64+0x14/0x2a0
 do_syscall_64+0x72/0x2a0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 702a4879 ("spi: bitbang: Let spi_bitbang_start() take a reference to master")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 176a1183 ]

snd_soc_component_update_bits() may return 1 if operation
was successful and the value of the register changed.
Return a non-zero in ak4458_rstn_control for an error only.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5087a8f1 ]

If playback/capture is paused and system enters S3, after system returns
from suspend, BE dai needs to call prepare() callback when playback/capture
is released from pause if RESUME_INFO flag is not set.

Currently, the dpcm_be_dai_prepare() function will block calling prepare()
if the pcm is in SND_SOC_DPCM_STATE_PAUSED state. This will cause the
following test case fail if the pcm uses BE:

playback -> pause -> S3 suspend -> S3 resume -> pause release

The playback may exit abnormally when pause is released because the BE dai
prepare() is not called.

This patch allows dpcm_be_dai_prepare() to call dai prepare() callback in
SND_SOC_DPCM_STATE_PAUSED state.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a8dee20d ]

AK4458 is probed successfully even if AK4458 is not present - this
is caused by probe function returning no error on i2c access failure.
Return an error on probe if i2c access has failed.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f3df05c8 ]

The cs4265_readable_register function stopped short of the maximum
register.

An example bug is taken from :
https://github.com/Audio-Injector/Ultra/issues/25

Where alsactl store fails with :
Cannot read control '2,0,0,C Data Buffer,0': Input/output error

This patch fixes the bug by setting the cs4265 to have readable
registers up to the maximum hardware register CS4265_MAX_REGISTER.
Signed-off-by: Matt Flax <flatmax@flatmax.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 69aeb538 upstream.

Guard this with a check vs. ipv4, IPCB isn't valid in ipv6 case.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 91a9048f upstream.

We can't deal with tcp sequence number rewrite in flow_offload.
While at it, simplify helper check, we only need to know if the extension
is present, we don't need the helper data.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8437a620 upstream.

Without it, whenever a packet has to be pushed up the stack (e.g. because
of mtu mismatch), then conntrack will flag packets as invalid, which in
turn breaks NAT.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e75b3e1c upstream.

Its irrelevant if the DF bit is set or not, we must pass packet to
stack in either case.

If the DF bit is set, we must pass it to stack so the appropriate
ICMP error can be generated.

If the DF is not set, we must pass it to stack for fragmentation.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

```--------------------------------------------------------------
This patch is not on mainline and is meant to 4.19 stable *only*.
After the patch description there's a reasoning about that.
```

--------------------------------------------------------------

Commit cd4a4ae4 ("block: don't use blocking queue entered for
recursive bio submits") introduced the flag BIO_QUEUE_ENTERED in order
split bios bypass the blocking queue entering routine and use the live
non-blocking version. It was a result of an extensive discussion in
a linux-block thread[0], and the purpose of this change was to prevent
a hung task waiting on a reference to drop.

Happens that md raid0 split bios all the time, and more important,
it changes their underlying device to the raid member. After the change
introduced by this flag's usage, we experience various crashes if a raid0
member is removed during a large write. This happens because the bio
reaches the live queue entering function when the queue of the raid0
member is dying.

A simple reproducer of this behavior is presented below:
a) Build kernel v4.19.56-stable with CONFIG_BLK_DEV_THROTTLING=y.

b) Create a raid0 md array with 2 NVMe devices as members, and mount
it with an ext4 filesystem.

c) Run the following oneliner (supposing the raid0 is mounted in /mnt):
(dd of=/mnt/tmp if=/dev/zero bs=1M count=999 &); sleep 0.3;
echo 1 > /sys/block/nvme1n1/device/device/remove
(whereas nvme1n1 is the 2nd array member)

This will trigger the following warning/oops:

------------[ cut here ]------------
BUG: unable to handle kernel NULL pointer dereference at 0000000000000155
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
RIP: 0010:blk_throtl_bio+0x45/0x970
[...]
Call Trace:
 generic_make_request_checks+0x1bf/0x690
 generic_make_request+0x64/0x3f0
 raid0_make_request+0x184/0x620 [raid0]
 ? raid0_make_request+0x184/0x620 [raid0]
 md_handle_request+0x126/0x1a0
 md_make_request+0x7b/0x180
 generic_make_request+0x19e/0x3f0
 submit_bio+0x73/0x140
[...]

This patch changes raid0 driver to fallback to the "old" blocking queue
entering procedure, by clearing the BIO_QUEUE_ENTERED from raid0 bios.
This prevents the crashes and restores the regular behavior of raid0
arrays when a member is removed during a large write.

[0] lore.kernel.org/linux-block/343bbbf6-64eb-879e-d19e-96aebb037d47@I-love.SAKURA.ne.jp

----------------------------
Why this is not on mainline?
----------------------------

The patch was originally submitted upstream in linux-raid and
linux-block mailing-lists - it was initially accepted by Song Liu,
but Christoph Hellwig[1] observed that there was a clean-up series
ready to be accepted from Ming Lei[2] that fixed the same issue.

The accepted patches from Ming's series in upstream are: commit
47cdee29 ("block: move blk_exit_queue into __blk_release_queue") and
commit fe200864 ("block: don't protect generic_make_request_checks
with blk_queue_enter"). Those patches basically do a clean-up in the
block layer involving:

1) Putting back blk_exit_queue() logic into __blk_release_queue(); that
path was changed in the past and the logic from blk_exit_queue() was
added to blk_cleanup_queue().

2) Removing the guard/protection in generic_make_request_checks() with
blk_queue_enter().

The problem with Ming's series for -stable is that it relies in the
legacy request IO path removal. So it's "backport-able" to v5.0+,
but doing that for early versions (like 4.19) would incur in complex
code changes. Hence, it was suggested by Christoph and Song Liu that
this patch was submitted to stable only; otherwise merging it upstream
would add code to fix a path removed in a subsequent commit.

[1] lore.kernel.org/linux-block/20190521172258.GA32702@infradead.org
[2] lore.kernel.org/linux-block/20190515030310.20393-1-ming.lei@redhat.com

Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: cd4a4ae4 ("block: don't use blocking queue entered for recursive bio submits")
Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

```--------------------------------------------------------------
This patch is not on mainline and is meant to 4.19 stable *only*.
After the patch description there's a reasoning about that.
```

--------------------------------------------------------------

Commit 37f9579f ("blk-mq: Avoid that submitting a bio concurrently
with device removal triggers a crash") introduced a NULL pointer
dereference in generic_make_request(). The patch sets q to NULL and
enter_succeeded to false; right after, there's an 'if (enter_succeeded)'
which is not taken, and then the 'else' will dereference q in
blk_queue_dying(q).

This patch just moves the 'q = NULL' to a point in which it won't trigger
the oops, although the semantics of this NULLification remains untouched.

A simple test case/reproducer is as follows:
a) Build kernel v4.19.56-stable with CONFIG_BLK_CGROUP=n.

b) Create a raid0 md array with 2 NVMe devices as members, and mount
it with an ext4 filesystem.

c) Run the following oneliner (supposing the raid0 is mounted in /mnt):
(dd of=/mnt/tmp if=/dev/zero bs=1M count=999 &); sleep 0.3;
echo 1 > /sys/block/nvme1n1/device/device/remove
(whereas nvme1n1 is the 2nd array member)

This will trigger the following oops:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000078
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
RIP: 0010:generic_make_request+0x32b/0x400
Call Trace:
 submit_bio+0x73/0x140
 ext4_io_submit+0x4d/0x60
 ext4_writepages+0x626/0xe90
 do_writepages+0x4b/0xe0
[...]

This patch has no functional changes and preserves the md/raid0 behavior
when a member is removed before kernel v4.17.

----------------------------
Why this is not on mainline?
----------------------------

The patch was originally submitted upstream in linux-raid and
linux-block mailing-lists - it was initially accepted by Song Liu,
but Christoph Hellwig[0] observed that there was a clean-up series
ready to be accepted from Ming Lei[1] that fixed the same issue.

The accepted patches from Ming's series in upstream are: commit
47cdee29 ("block: move blk_exit_queue into __blk_release_queue") and
commit fe200864 ("block: don't protect generic_make_request_checks
with blk_queue_enter"). Those patches basically do a clean-up in the
block layer involving:

1) Putting back blk_exit_queue() logic into __blk_release_queue(); that
path was changed in the past and the logic from blk_exit_queue() was
added to blk_cleanup_queue().

2) Removing the guard/protection in generic_make_request_checks() with
blk_queue_enter().

The problem with Ming's series for -stable is that it relies in the
legacy request IO path removal. So it's "backport-able" to v5.0+,
but doing that for early versions (like 4.19) would incur in complex
code changes. Hence, it was suggested by Christoph and Song Liu that
this patch was submitted to stable only; otherwise merging it upstream
would add code to fix a path removed in a subsequent commit.

[0] lore.kernel.org/linux-block/20190521172258.GA32702@infradead.org
[1] lore.kernel.org/linux-block/20190515030310.20393-1-ming.lei@redhat.com

Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Eric Ren <renzhengeek@gmail.com>
Fixes: 37f9579f ("blk-mq: Avoid that submitting a bio concurrently with device removal triggers a crash")
Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>