The seg6_input() function is responsible for adding the SRH into a
packet, delegating the operation to the seg6_input_core(). This function
uses the skb_cow_head() to ensure that there is sufficient headroom in
the sk_buff for accommodating the link-layer header.
In the event that the skb_cow_header() function fails, the
seg6_input_core() catches the error but it does not release the sk_buff,
which will result in a memory leak.

This issue was introduced in commit af3b5158 ("ipv6: sr: fix BUG due
to headroom too small after SRH push") and persists even after commit
7a3f5b0d ("netfilter: add netfilter hooks to SRv6 data plane"),
where the entire seg6_input() code was refactored to deal with netfilter
hooks.

The proposed patch addresses the identified memory leak by requiring the
seg6_input_core() function to release the sk_buff in the event that
skb_cow_head() fails.

Fixes: af3b5158 ("ipv6: sr: fix BUG due to headroom too small after SRH push")
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Stephen reported that he was unable to get the dsa_loop driver to get
probed, and the reason ended up being because he had CONFIG_FIXED_PHY=y
in his kernel configuration. As Masahiro explained it:

  "obj-m += dsa/" means everything under dsa/ must be modular.

  If there is a built-in object under dsa/ with CONFIG_NET_DSA=m,
  you cannot do  "obj-$(CONFIG_NET_DSA) += dsa/".

  You need to change it back to "obj-y += dsa/".

This was the case here whereby CONFIG_NET_DSA=m, and so the
obj-$(CONFIG_FIXED_PHY) += dsa_loop_bdinfo.o rule is not executed and
the DSA loop mdio_board info structure is not registered with the
kernel, and eventually the device is simply not found.

To preserve the intention of the original commit of limiting the amount
of folder descending, conditionally descend into drivers/net/dsa when
CONFIG_NET_DSA is enabled.

Fixes: 227d7206 ("dsa: simplify Kconfig symbols and dependencies")
Reported-by: Stephen Langstaff <stephenlangstaff1@gmail.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 1a7d0890 ("kprobe/ftrace: bail out if ftrace was killed")
introduced a bad K&R function definition, which we haven't accepted in a
long long time.

Gcc seems to let it slide, but clang notices with the appropriate error:

  kernel/kprobes.c:1140:24: error: a function declaration without a prototype is deprecated in all >
   1140 | void kprobe_ftrace_kill()
        |                        ^
        |                         void

but this commit was apparently never in linux-next before it was sent
upstream, so it didn't get the appropriate build test coverage.

Fixes: 1a7d0890 kprobe/ftrace: bail out if ftrace was killed
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from Jakub Kicinski:
 "Current release - regressions:

   - virtio_net: fix missed error path rtnl_unlock after control queue
     locking rework

  Current release - new code bugs:

   - bpf: fix KASAN slab-out-of-bounds in percpu_array_map_gen_lookup,
     caused by missing nested map handling

   - drv: dsa: correct initialization order for KSZ88x3 ports

  Previous releases - regressions:

   - af_packet: do not call packet_read_pending() from
     tpacket_destruct_skb() fix performance regression

   - ipv6: fix route deleting failure when metric equals 0, don't assume
     0 means not set / default in this case

  Previous releases - always broken:

   - bridge: couple of syzbot-driven fixes"

* tag 'net-6.10-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (30 commits)
  selftests: net: local_termination: annotate the expected failures
  net: dsa: microchip: Correct initialization order for KSZ88x3 ports
  MAINTAINERS: net: Update reviewers for TI's Ethernet drivers
  dt-bindings: net: ti: Update maintainers list
  l2tp: fix ICMP error handling for UDP-encap sockets
  net: txgbe: fix to control VLAN strip
  net: wangxun: match VLAN CTAG and STAG features
  net: wangxun: fix to change Rx features
  af_packet: do not call packet_read_pending() from tpacket_destruct_skb()
  virtio_net: Fix missed rtnl_unlock
  netrom: fix possible dead-lock in nr_rt_ioctl()
  idpf: don't skip over ethtool tcp-data-split setting
  dt-bindings: net: qcom: ethernet: Allow dma-coherent
  bonding: fix oops during rmmod
  net/ipv6: Fix route deleting failure when metric equals 0
  selftests/net: reduce xfrm_policy test time
  selftests/bpf: Adjust btf_dump test to reflect recent change in file_operations
  selftests/bpf: Adjust test_access_variable_array after a kernel function name change
  selftests/net/lib: no need to record ns name if it already exist
  net: qrtr: ns: Fix module refcnt
  ...

Pull tracing tool updates from Steven Rostedt:
 "Specific for timerlat:

   - Improve the output of timerlat top by adding a missing \n, and by
     avoiding printing color-formatting characters where they are
     translated to regular characters.

   - Improve timerlat auto-analysis output by replacing '\t' with spaces
     to avoid copy-and-paste issues when reporting problems.

   - Make the user-space (-u) option the default, as it is the most
     complete test. Add a -k option to use the in-kernel workload.

   - On timerlat top and hist, add a summary with the overall results.
     For instance, the minimum value for all CPUs, the overall average
     and the maximum value from all CPUs.

   - timerlat hist was printing initial values (i.e., 0 as max, and ~0
     as min) if the trace stopped before the first Ret-User event. This
     problem was fixed by printing the " - " no value string to the
     output if that was the case.

  For all RTLA tools:

   - Add a --warm-up <seconds> option, allowing the workload to run for
     <seconds> before starting to collect results.

   - Add a --trace-buffer-size option, allowing the user to set the
     tracing buffer size for -t option. This option is mainly useful for
     reducing the trace file. Now rtla depends on libtracefs >= 1.6.

   - Fix the -t [trace_file] parsing, now it does not require the '='
     before the option parameter, and better handles the multiple ways a
     user can pass the trace_file.txt"

* tag 'trace-tools-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  rtla: Documentation: Fix -t, --trace
  rtla: Fix -t\--trace[=file]
  rtla/timerlat: Fix histogram report when a cpu count is 0
  rtla: Add --trace-buffer-size option
  rtla/timerlat: Make user-space threads the default
  rtla: Add the --warm-up option
  rtla/timerlat: Add a summary for hist mode
  rtla/timerlat: Add a summary for top mode
  rtla/timerlat: Use pretty formatting only on interactive tty
  rtla/auto-analysis: Replace \t with spaces
  rtla/timerlat: Simplify "no value" printing on top

Merge tag 'trace-user-events-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull tracing user-event updates from Steven Rostedt:

 - Minor update to the user_events interface

  The ABI of creating a user event states that the fields are separated
  by semicolons, and spaces should be ignored.

  But the parsing expected at least one space to be there (which was
  incorrect). Fix the reading of the string to handle fields separated
  by semicolons but no space between them.

  This does extend the API sightly as now "field;field" will now be
  parsed and not cause an error. But it should not cause any regressions
  as no logic should expect it to fail.

  Note, that the logic that parses the event fields to create the
  trace_event works with no spaces after the semi-colon. It is
  the logic that tests against existing events that is inconsistent.
  This causes registering an event without using spaces to succeed
  if it doesn't exist, but makes the same call that tries to register
  to the same event, but doesn't use spaces, fail.

* tag 'trace-user-events-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  selftests/user_events: Add non-spacing separator check
  tracing/user_events: Fix non-spaced field matching

Merge tag 'trace-ringbuffer-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull tracing ring buffer updates from Steven Rostedt:
 "Add ring_buffer memory mappings.

  The tracing ring buffer was created based on being mostly used with
  the splice system call. It is broken up into page ordered sub-buffers
  and the reader swaps a new sub-buffer with an existing sub-buffer
  that's part of the write buffer. It then has total access to the
  swapped out sub-buffer and can do copyless movements of the memory
  into other mediums (file system, network, etc).

  The buffer is great for passing around the ring buffer contents in the
  kernel, but is not so good for when the consumer is the user space
  task itself.

  A new interface is added that allows user space to memory map the ring
  buffer. It will get all the write sub-buffers as well as reader
  sub-buffer (that is not written to). It can send an ioctl to change
  which sub-buffer is the new reader sub-buffer.

  The ring buffer is read only to user space. It only needs to call the
  ioctl when it is finished with a sub-buffer and needs a new sub-buffer
  that the writer will not write over.

  A self test program was also created for testing and can be used as an
  example for the interface to user space. The libtracefs (external to
  the kernel) also has code that interacts with this, although it is
  disabled until the interface is in a official release. It can be
  enabled by compiling the library with a special flag. This was used
  for testing applications that perform better with the buffer being
  mapped.

  Memory mapped buffers have limitations. The main one is that it can
  not be used with the snapshot logic. If the buffer is mapped,
  snapshots will be disabled. If any logic is set to trigger snapshots
  on a buffer, that buffer will not be allowed to be mapped"

* tag 'trace-ringbuffer-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  ring-buffer: Add cast to unsigned long addr passed to virt_to_page()
  ring-buffer: Have mmapped ring buffer keep track of missed events
  ring-buffer/selftest: Add ring-buffer mapping test
  Documentation: tracing: Add ring-buffer mapping
  tracing: Allow user-space mapping of the ring-buffer
  ring-buffer: Introducing ring-buffer mapping functions
  ring-buffer: Allocate sub-buffers with __GFP_COMP

Pull tracing updates from Steven Rostedt:

 - Remove unused ftrace_direct_funcs variables

 - Fix a possible NULL pointer dereference race in eventfs

 - Update do_div() usage in trace event benchmark test

 - Speedup direct function registration with asynchronous RCU callback.

   The synchronization was done in the registration code and this caused
   delays when registering direct callbacks. Move the freeing to a
   call_rcu() that will prevent delaying of the registering.

 - Replace simple_strtoul() usage with kstrtoul()

* tag 'trace-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  eventfs: Fix a possible null pointer dereference in eventfs_find_events()
  ftrace: Fix possible use-after-free issue in ftrace_location()
  ftrace: Remove unused global 'ftrace_direct_func_count'
  ftrace: Remove unused list 'ftrace_direct_funcs'
  tracing: Improve benchmark test performance by using do_div()
  ftrace: Use asynchronous grace period for register_ftrace_direct()
  ftrace: Replaces simple_strtoul in ftrace

Pull probes updates from Masami Hiramatsu:

 - tracing/probes: Add new pseudo-types %pd and %pD support for dumping
   dentry name from 'struct dentry *' and file name from 'struct file *'

 - uprobes performance optimizations:
    - Speed up the BPF uprobe event by delaying the fetching of the
      uprobe event arguments that are not used in BPF
    - Avoid locking by speculatively checking whether uprobe event is
      valid
    - Reduce lock contention by using read/write_lock instead of
      spinlock for uprobe list operation. This improved BPF uprobe
      benchmark result 43% on average

 - rethook: Remove non-fatal warning messages when tracing stack from
   BPF and skip rcu_is_watching() validation in rethook if possible

 - objpool: Optimize objpool (which is used by kretprobes and fprobe as
   rethook backend storage) by inlining functions and avoid caching
   nr_cpu_ids because it is a const value

 - fprobe: Add entry/exit callbacks types (code cleanup)

 - kprobes: Check ftrace was killed in kprobes if it uses ftrace

* tag 'probes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  kprobe/ftrace: bail out if ftrace was killed
  selftests/ftrace: Fix required features for VFS type test case
  objpool: cache nr_possible_cpus() and avoid caching nr_cpu_ids
  objpool: enable inlining objpool_push() and objpool_pop() operations
  rethook: honor CONFIG_FTRACE_VALIDATE_RCU_IS_WATCHING in rethook_try_get()
  ftrace: make extra rcu_is_watching() validation check optional
  uprobes: reduce contention on uprobes_tree access
  rethook: Remove warning messages printed for finding return address of a frame.
  fprobe: Add entry/exit callbacks types
  selftests/ftrace: add fprobe test cases for VFS type "%pd" and "%pD"
  selftests/ftrace: add kprobe test cases for VFS type "%pd" and "%pD"
  Documentation: tracing: add new type '%pd' and '%pD' for kprobe
  tracing/probes: support '%pD' type for print struct file's name
  tracing/probes: support '%pd' type for print struct dentry's name
  uprobes: add speculative lockless system-wide uprobe filter check
  uprobes: prepare uprobe args buffer lazily
  uprobes: encapsulate preparation of uprobe args buffer

Pull bootconfig updates from Masami Hiramatsu:

 - Do not put unneeded quotes on the extra command line items which was
   inserted from the bootconfig.

 - Remove redundant spaces from the extra command line.

* tag 'bootconfig-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  init/main.c: Minor cleanup for the setup_command_line() function
  init/main.c: Remove redundant space from saved_command_line
  bootconfig: do not put quotes on cmdline items unless necessary

Pull sysctl updates from Joel Granados:

 - Remove sentinel elements from ctl_table structs in kernel/*

   Removing sentinels in ctl_table arrays reduces the build time size
   and runtime memory consumed by ~64 bytes per array. Removals for
   net/, io_uring/, mm/, ipc/ and security/ are set to go into mainline
   through their respective subsystems making the next release the most
   likely place where the final series that removes the check for
   proc_name == NULL will land.

   This adds to removals already in arch/, drivers/ and fs/.

 - Adjust ctl_table definitions and references to allow constification
     - Remove unused ctl_table function arguments
     - Move non-const elements from ctl_table to ctl_table_header
     - Make ctl_table pointers const in ctl_table_root structure

   Making the static ctl_table structs const will increase safety by
   keeping the pointers to proc_handler functions in .rodata. Though no
   ctl_tables where made const in this PR, the ground work for making
   that possible has started with these changes sent by Thomas
   Weißschuh.

* tag 'sysctl-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
  sysctl: drop now unnecessary out-of-bounds check
  sysctl: move sysctl type to ctl_table_header
  sysctl: drop sysctl_is_perm_empty_ctl_table
  sysctl: treewide: constify argument ctl_table_root::permissions(table)
  sysctl: treewide: drop unused argument ctl_table_root::set_ownership(table)
  bpf: Remove the now superfluous sentinel elements from ctl_table array
  delayacct: Remove the now superfluous sentinel elements from ctl_table array
  kprobes: Remove the now superfluous sentinel elements from ctl_table array
  printk: Remove the now superfluous sentinel elements from ctl_table array
  scheduler: Remove the now superfluous sentinel elements from ctl_table array
  seccomp: Remove the now superfluous sentinel elements from ctl_table array
  timekeeping: Remove the now superfluous sentinel elements from ctl_table array
  ftrace: Remove the now superfluous sentinel elements from ctl_table array
  umh: Remove the now superfluous sentinel elements from ctl_table array
  kernel misc: Remove the now superfluous sentinel elements from ctl_table array

Pull devicetree updates from Rob Herring:
 "DT Bindings:

   - Convert samsung,exynos5-dp, atmel,lcdc, aspeed,ast2400-wdt bindings
     to schemas

   - Add bindings for Allwinner H616 NMI controller, Renesas r8a779g0
     irqc, Renesas R-Car V4M TMU and CMT timers, Freescale S32G3
     linflexuart, and Mediatek MT7988 XHCI

   - Add 'reg' constraints on DSI and SPI display panels

   - More dropping of unnecessary quotes in schemas

   - Use full paths rather than relative paths in schema $refs

   - Drop redundant storing of phandle for reserved memory

  DT Core:

   - Use scope based cleanups for kfree() and of_node_put()

   - Track interrupt-map and power-supplies for fw_devlink

   - Add buffer overflow check in of_modalias()

   - Add and use __of_prop_free() helper for freeing struct property"

* tag 'devicetree-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (25 commits)
  of: property: Add fw_devlink support for interrupt-map property
  dt-bindings: display: panel: constrain 'reg' in DSI panels
  dt-bindings: display: panel: constrain 'reg' in SPI panels
  dt-bindings: display: samsung,ams495qa01: add missing SPI properties ref
  dt-bindings: Use full path to other schemas
  dt-bindings: PCI: qcom,pcie-sm8350: Drop redundant 'oneOf' sub-schema
  of: module: add buffer overflow check in of_modalias()
  dt-bindings: PCI: microchip: increase number of items in ranges property
  dt-bindings: Drop unnecessary quotes on keys
  dt-bindings: interrupt-controller: mediatek,mt6577-sysirq: Drop unnecessary quotes
  of: property: Use scope based cleanup on port_node
  of: reserved_mem: Remove the use of phandle from the reserved_mem APIs
  of: property: fw_devlink: Add support for "power-supplies" binding
  dt-bindings: watchdog: aspeed,ast2400-wdt: Convert to DT schema
  dt-bindings: irq: sun7i-nmi: Add binding for the H616 NMI controller
  dt-bindings: interrupt-controller: renesas,irqc: Add r8a779g0 support
  dt-bindings: timer: renesas,tmu: Add R-Car V4M support
  dt-bindings: timer: renesas,cmt: Add R-Car V4M support
  of: Use scope based of_node_put() cleanups
  of: Use scope based kfree() cleanups
  ...

Vladimir said when adding this test:

  The bridge driver fares particularly badly [...] mainly because
  it does not implement IFF_UNICAST_FLT.

See commit 90b9566a ("selftests: forwarding: add a test for
local_termination.sh").

We don't want to hide the known gaps, but having a test which
always fails prevents us from catching regressions. Report
the cases we know may fail as XFAIL.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20240516152513.1115270-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Adjust the initialization sequence of KSZ88x3 switches to enable
802.1p priority control on Port 2 before configuring Port 1. This
change ensures the apptrust functionality on Port 1 operates
correctly, as it depends on the priority settings of Port 2. The
prior initialization sequence incorrectly configured Port 1 first,
which could lead to functional discrepancies.

Fixes: a1ea5771 ("net: dsa: microchip: dcb: add special handling for KSZ88X3 family")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Link: https://lore.kernel.org/r/20240517050121.2174412-1-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Remove myself as reviewer for TI's ethernet drivers
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240516082545.6412-1-r-gunasekaran@ti.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Update the list with the current maintainers of TI's CPSW ethernet
peripheral.
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240516054932.27597-1-r-gunasekaran@ti.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since commit a36e185e
("udp: Handle ICMP errors for tunnels with same destination port on both endpoints")
UDP's handling of ICMP errors has allowed for UDP-encap tunnels to
determine socket associations in scenarios where the UDP hash lookup
could not.

Subsequently, commit d26796ae
("udp: check udp sock encap_type in __udp_lib_err")
subtly tweaked the approach such that UDP ICMP error handling would be
skipped for any UDP socket which has encapsulation enabled.

In the case of L2TP tunnel sockets using UDP-encap, this latter
modification effectively broke ICMP error reporting for the L2TP
control plane.

To a degree this isn't catastrophic inasmuch as the L2TP control
protocol defines a reliable transport on top of the underlying packet
switching network which will eventually detect errors and time out.

However, paying attention to the ICMP error reporting allows for more
timely detection of errors in L2TP userspace, and aids in debugging
connectivity issues.

Reinstate ICMP error handling for UDP encap L2TP tunnels:

 * implement struct udp_tunnel_sock_cfg .encap_err_rcv in order to allow
   the L2TP code to handle ICMP errors;

 * only implement error-handling for tunnels which have a managed
   socket: unmanaged tunnels using a kernel socket have no userspace to
   report errors back to;

 * flag the error on the socket, which allows for userspace to get an
   error such as -ECONNREFUSED back from sendmsg/recvmsg;

 * pass the error into ip[v6]_icmp_error() which allows for userspace to
   get extended error information via. MSG_ERRQUEUE.

Fixes: d26796ae ("udp: check udp sock encap_type in __udp_lib_err")
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Link: https://lore.kernel.org/r/20240513172248.623261-1-tparkin@katalix.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull parisc updates from Helge Deller:

 -  define sigset_t in parisc uapi header to fix build of util-linux

 -  define HAVE_ARCH_HUGETLB_UNMAPPED_AREA to avoid compiler warning

 -  drop unused 'exc_reg' struct in math-emu code

* tag 'parisc-for-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
  parisc/math-emu: Remove unused struct 'exc_reg'
  parisc: Define sigset_t in parisc uapi header

Pull powerpc updates from Michael Ellerman:

 - Enable BPF Kernel Functions (kfuncs) in the powerpc BPF JIT.

 - Allow per-process DEXCR (Dynamic Execution Control Register) settings
   via prctl, notably NPHIE which controls hashst/hashchk for ROP
   protection.

 - Install powerpc selftests in sub-directories. Note this changes the
   way run_kselftest.sh needs to be invoked for powerpc selftests.

 - Change fadump (Firmware Assisted Dump) to better handle memory
   add/remove.

 - Add support for passing additional parameters to the fadump kernel.

 - Add support for updating the kdump image on CPU/memory add/remove
   events.

 - Other small features, cleanups and fixes.

Thanks to Andrew Donnellan, Andy Shevchenko, Aneesh Kumar K.V, Arnd
Bergmann, Benjamin Gray, Bjorn Helgaas, Christian Zigotzky, Christophe
Jaillet, Christophe Leroy, Colin Ian King, Cédric Le Goater, Dr. David
Alan Gilbert, Erhard Furtner, Frank Li, GUO Zihua, Ganesh Goudar, Geoff
Levand, Ghanshyam Agrawal, Greg Kurz, Hari Bathini, Joel Stanley, Justin
Stitt, Kunwu Chan, Li Yang, Lidong Zhong, Madhavan Srinivasan, Mahesh
Salgaonkar, Masahiro Yamada, Matthias Schiffer, Naresh Kamboju, Nathan
Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Miehlbradt, Ran Wang,
Randy Dunlap, Ritesh Harjani, Sachin Sant, Shirisha Ganta, Shrikanth
Hegde, Sourabh Jain, Stephen Rothwell, sundar, Thorsten Blum, Vaibhav
Jain, Xiaowei Bao, Yang Li, and Zhao Chenhui.

* tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (85 commits)
  powerpc/fadump: Fix section mismatch warning
  powerpc/85xx: fix compile error without CONFIG_CRASH_DUMP
  powerpc/fadump: update documentation about bootargs_append
  powerpc/fadump: pass additional parameters when fadump is active
  powerpc/fadump: setup additional parameters for dump capture kernel
  powerpc/pseries/fadump: add support for multiple boot memory regions
  selftests/powerpc/dexcr: Fix spelling mistake "predicition" -> "prediction"
  KVM: PPC: Book3S HV nestedv2: Fix an error handling path in gs_msg_ops_kvmhv_nestedv2_config_fill_info()
  KVM: PPC: Fix documentation for ppc mmu caps
  KVM: PPC: code cleanup for kvmppc_book3s_irqprio_deliver
  KVM: PPC: Book3S HV nestedv2: Cancel pending DEC exception
  powerpc/xmon: Check cpu id in commands "c#", "dp#" and "dx#"
  powerpc/code-patching: Use dedicated memory routines for patching
  powerpc/code-patching: Test patch_instructions() during boot
  powerpc64/kasan: Pass virtual addresses to kasan_init_phys_region()
  powerpc: rename SPRN_HID2 define to SPRN_HID2_750FX
  powerpc: Fix typos
  powerpc/eeh: Fix spelling of the word "auxillary" and update comment
  macintosh/ams: Fix unused variable warning
  powerpc/Makefile: Remove bits related to the previous use of -mcmodel=large
  ...

Pull ARM updates from Russell King:

 - Updates to AMBA bus subsystem to drop .owner struct device_driver
   initialisations, moving that to code instead.

 - Add LPAE privileged-access-never support

 - Add support for Clang CFI

 - clkdev: report over-sized device or connection strings

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux: (36 commits)
  ARM: 9398/1: Fix userspace enter on LPAE with CC_OPTIMIZE_FOR_SIZE=y
  clkdev: report over-sized strings when creating clkdev entries
  ARM: 9393/1: mm: Use conditionals for CFI branches
  ARM: 9392/2: Support CLANG CFI
  ARM: 9391/2: hw_breakpoint: Handle CFI breakpoints
  ARM: 9390/2: lib: Annotate loop delay instructions for CFI
  ARM: 9389/2: mm: Define prototypes for all per-processor calls
  ARM: 9388/2: mm: Type-annotate all per-processor assembly routines
  ARM: 9387/2: mm: Rewrite cacheflush vtables in CFI safe C
  ARM: 9386/2: mm: Use symbol alias for cache functions
  ARM: 9385/2: mm: Type-annotate all cache assembly routines
  ARM: 9384/2: mm: Make tlbflush routines CFI safe
  ARM: 9382/1: ftrace: Define ftrace_stub_graph
  ARM: 9358/2: Implement PAN for LPAE by TTBR0 page table walks disablement
  ARM: 9357/2: Reduce the number of #ifdef CONFIG_CPU_SW_DOMAIN_PAN
  ARM: 9356/2: Move asm statements accessing TTBCR into C functions
  ARM: 9355/2: Add TTBCR_* definitions to pgtable-3level-hwdef.h
  ARM: 9379/1: coresight: tpda: drop owner assignment
  ARM: 9378/1: coresight: etm4x: drop owner assignment
  ARM: 9377/1: hwrng: nomadik: drop owner assignment
  ...

Jiawen Wu says:

====================
Wangxun fixes

Fixed some bugs when using ethtool to operate network devices.

v4 -> v5:
- Simplify if...else... to fix features.

v3 -> v4:
- Require both ctag and stag to be enabled or disabled.

v2 -> v3:
- Drop the first patch.

v1 -> v2:
- Factor out the same code.
- Remove statistics printing with more than 64 queues.
- Detail the commit logs to describe issues.
- Remove reset flag check in wx_update_stats().
- Change to set VLAN CTAG and STAG to be consistent.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When VLAN tag strip is changed to enable or disable, the hardware requires
the Rx ring to be in a disabled state, otherwise the feature cannot be
changed.

Fixes: f3b03c65 ("net: wangxun: Implement vlan add and kill functions")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Hardware requires VLAN CTAG and STAG configuration always matches. And
whether VLAN CTAG or STAG changes, the configuration needs to be changed
as well.

Fixes: 6670f1ec ("net: txgbe: Add netdev features support")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the issue where some Rx features cannot be changed.

When using ethtool -K to turn off rx offload, it returns error and
displays "Could not change any device features". And netdev->features
is not assigned a new value to actually configure the hardware.

Fixes: 6dbedcff ("net: libwx: Implement xx_set_features ops")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

trafgen performance considerably sank on hosts with many cores
after the blamed commit.

packet_read_pending() is very expensive, and calling it
in af_packet fast path defeats Daniel intent in commit
b0138408 ("packet: use percpu mmap tx frame pending refcount")

tpacket_destruct_skb() makes room for one packet, we can immediately
wakeup a producer, no need to completely drain the tx ring.

Fixes: 89ed5b51 ("af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240515163358.4105915-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The rtnl_lock would stay locked if allocating promisc_allmulti failed.
Also changed the allocation to GFP_KERNEL.

Fixes: ff7c7d9f ("virtio_net: Remove command data from control_buf")
Reported-by: Eric Dumazet <edumaset@google.com>
Link: https://lore.kernel.org/netdev/CANn89iLazVaUCvhPm6RPJJ0owra_oFnx7Fhc8d60gV-65ad3WQ@mail.gmail.com/Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20240515163125.569743-1-danielj@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot loves netrom, and found a possible deadlock in nr_rt_ioctl [1]

Make sure we always acquire nr_node_list_lock before nr_node_lock(nr_node)

[1]
WARNING: possible circular locking dependency detected
6.9.0-rc7-syzkaller-02147-g654de42f #0 Not tainted
------------------------------------------------------
syz-executor350/5129 is trying to acquire lock:
 ffff8880186e2070 (&nr_node->node_lock){+...}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline]
 ffff8880186e2070 (&nr_node->node_lock){+...}-{2:2}, at: nr_node_lock include/net/netrom.h:152 [inline]
 ffff8880186e2070 (&nr_node->node_lock){+...}-{2:2}, at: nr_dec_obs net/netrom/nr_route.c:464 [inline]
 ffff8880186e2070 (&nr_node->node_lock){+...}-{2:2}, at: nr_rt_ioctl+0x1bb/0x1090 net/netrom/nr_route.c:697

but task is already holding lock:
 ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline]
 ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: nr_dec_obs net/netrom/nr_route.c:462 [inline]
 ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: nr_rt_ioctl+0x10a/0x1090 net/netrom/nr_route.c:697

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (nr_node_list_lock){+...}-{2:2}:
        lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
        __raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline]
        _raw_spin_lock_bh+0x35/0x50 kernel/locking/spinlock.c:178
        spin_lock_bh include/linux/spinlock.h:356 [inline]
        nr_remove_node net/netrom/nr_route.c:299 [inline]
        nr_del_node+0x4b4/0x820 net/netrom/nr_route.c:355
        nr_rt_ioctl+0xa95/0x1090 net/netrom/nr_route.c:683
        sock_do_ioctl+0x158/0x460 net/socket.c:1222
        sock_ioctl+0x629/0x8e0 net/socket.c:1341
        vfs_ioctl fs/ioctl.c:51 [inline]
        __do_sys_ioctl fs/ioctl.c:904 [inline]
        __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:890
        do_syscall_x64 arch/x86/entry/common.c:52 [inline]
        do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
       entry_SYSCALL_64_after_hwframe+0x77/0x7f

-> #0 (&nr_node->node_lock){+...}-{2:2}:
        check_prev_add kernel/locking/lockdep.c:3134 [inline]
        check_prevs_add kernel/locking/lockdep.c:3253 [inline]
        validate_chain+0x18cb/0x58e0 kernel/locking/lockdep.c:3869
        __lock_acquire+0x1346/0x1fd0 kernel/locking/lockdep.c:5137
        lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
        __raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline]
        _raw_spin_lock_bh+0x35/0x50 kernel/locking/spinlock.c:178
        spin_lock_bh include/linux/spinlock.h:356 [inline]
        nr_node_lock include/net/netrom.h:152 [inline]
        nr_dec_obs net/netrom/nr_route.c:464 [inline]
        nr_rt_ioctl+0x1bb/0x1090 net/netrom/nr_route.c:697
        sock_do_ioctl+0x158/0x460 net/socket.c:1222
        sock_ioctl+0x629/0x8e0 net/socket.c:1341
        vfs_ioctl fs/ioctl.c:51 [inline]
        __do_sys_ioctl fs/ioctl.c:904 [inline]
        __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:890
        do_syscall_x64 arch/x86/entry/common.c:52 [inline]
        do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
       entry_SYSCALL_64_after_hwframe+0x77/0x7f

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(nr_node_list_lock);
                               lock(&nr_node->node_lock);
                               lock(nr_node_list_lock);
  lock(&nr_node->node_lock);

 *** DEADLOCK ***

1 lock held by syz-executor350/5129:
  #0: ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline]
  #0: ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: nr_dec_obs net/netrom/nr_route.c:462 [inline]
  #0: ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: nr_rt_ioctl+0x10a/0x1090 net/netrom/nr_route.c:697

stack backtrace:
CPU: 0 PID: 5129 Comm: syz-executor350 Not tainted 6.9.0-rc7-syzkaller-02147-g654de42f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024
Call Trace:
 <TASK>
  __dump_stack lib/dump_stack.c:88 [inline]
  dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
  check_noncircular+0x36a/0x4a0 kernel/locking/lockdep.c:2187
  check_prev_add kernel/locking/lockdep.c:3134 [inline]
  check_prevs_add kernel/locking/lockdep.c:3253 [inline]
  validate_chain+0x18cb/0x58e0 kernel/locking/lockdep.c:3869
  __lock_acquire+0x1346/0x1fd0 kernel/locking/lockdep.c:5137
  lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
  __raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline]
  _raw_spin_lock_bh+0x35/0x50 kernel/locking/spinlock.c:178
  spin_lock_bh include/linux/spinlock.h:356 [inline]
  nr_node_lock include/net/netrom.h:152 [inline]
  nr_dec_obs net/netrom/nr_route.c:464 [inline]
  nr_rt_ioctl+0x1bb/0x1090 net/netrom/nr_route.c:697
  sock_do_ioctl+0x158/0x460 net/socket.c:1222
  sock_ioctl+0x629/0x8e0 net/socket.c:1341
  vfs_ioctl fs/ioctl.c:51 [inline]
  __do_sys_ioctl fs/ioctl.c:904 [inline]
  __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:890
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240515142934.3708038-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Disabling tcp-data-split on idpf silently fails:
  # ethtool -G $NETDEV tcp-data-split off
  # ethtool -g $NETDEV | grep 'TCP data split'
  TCP data split:        on

But it works if you also change 'tx' or 'rx':
  # ethtool -G $NETDEV tcp-data-split off tx 256
  # ethtool -g $NETDEV | grep 'TCP data split'
  TCP data split:        off

The bug is in idpf_set_ringparam, where it takes a shortcut out if the
TX and RX sizes are not changing. Fix it by checking also if the
tcp-data-split setting remains unchanged. Only then can the soft reset
be skipped.

Fixes: 9b1aa3ef ("idpf: add get/set for Ethtool's header split ringparam")
Reported-by: Xu Du <xudu@redhat.com>
Closes: https://issues.redhat.com/browse/RHEL-36182Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20240515092414.158079-1-mschmidt@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

On SA8775P, Ethernet DMA controller is coherent with the CPU.
allow specifying that.
Signed-off-by: Sagar Cheluvegowda <quic_scheluve@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240514-mark_ethernet_devices_dma_coherent-v4-2-04e1198858c5@quicinc.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

"rmmod bonding" causes an oops ever since commit cc317ea3 ("bonding:
remove redundant NULL check in debugfs function").  Here are the relevant
functions being called:

bonding_exit()
  bond_destroy_debugfs()
    debugfs_remove_recursive(bonding_debug_root);
    bonding_debug_root = NULL; <--------- SET TO NULL HERE
  bond_netlink_fini()
    rtnl_link_unregister()
      __rtnl_link_unregister()
        unregister_netdevice_many_notify()
          bond_uninit()
            bond_debug_unregister()
              (commit removed check for bonding_debug_root == NULL)
              debugfs_remove()
              simple_recursive_removal()
                down_write() -> OOPS

However, reverting the bad commit does not solve the problem completely
because the original code contains a race that could cause the same
oops, although it was much less likely to be triggered unintentionally:

CPU1
  rmmod bonding
    bonding_exit()
      bond_destroy_debugfs()
        debugfs_remove_recursive(bonding_debug_root);

CPU2
  echo -bond0 > /sys/class/net/bonding_masters
    bond_uninit()
      bond_debug_unregister()
        if (!bonding_debug_root)

CPU1
        bonding_debug_root = NULL;

So do NOT revert the bad commit (since the removed checks were racy
anyway), and instead change the order of actions taken during module
removal.  The same oops can also happen if there is an error during
module init, so apply the same fix there.

Fixes: cc317ea3 ("bonding: remove redundant NULL check in debugfs function")
Cc: stable@vger.kernel.org
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/641f914f-3216-4eeb-87dd-91b78aa97773@cybernetics.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Problem
=========
After commit 67f69513 ("ipv6: Move setting default metric for routes"),
we noticed that the logic of assigning the default value of fc_metirc
changed in the ioctl process. That is, when users use ioctl(fd, SIOCADDRT,
rt) with a non-zero metric to add a route,  then they may fail to delete a
route with passing in a metric value of 0 to the kernel by ioctl(fd,
SIOCDELRT, rt). But iproute can succeed in deleting it.

As a reference, when using iproute tools by netlink to delete routes with
a metric parameter equals 0, like the command as follows:

	ip -6 route del fe80::/64 via fe81::5054:ff:fe11:3451 dev eth0 metric 0

the user can still succeed in deleting the route entry with the smallest
metric.

Root Reason
===========
After commit 67f69513 ("ipv6: Move setting default metric for routes"),
When ioctl() pass in SIOCDELRT with a zero metric, rtmsg_to_fib6_config()
will set a defalut value (1024) to cfg->fc_metric in kernel, and in
ip6_route_del() and the line 4074 at net/ipv3/route.c, it will check by

	if (cfg->fc_metric && cfg->fc_metric != rt->fib6_metric)
		continue;

and the condition is true and skip the later procedure (deleting route)
because cfg->fc_metric != rt->fib6_metric. But before that commit,
cfg->fc_metric is still zero there, so the condition is false and it
will do the following procedure (deleting).

Solution
========
In order to keep a consistent behaviour across netlink() and ioctl(), we
should allow to delete a route with a metric value of 0. So we only do
the default setting of fc_metric in route adding.

CC: stable@vger.kernel.org # 5.4+
Fixes: 67f69513 ("ipv6: Move setting default metric for routes")
Co-developed-by: Fan Yu <fan.yu9@zte.com.cn>
Signed-off-by: Fan Yu <fan.yu9@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240514201102055dD2Ba45qKbLlUMxu_DTHP@zte.com.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The check_random_order test add/get plenty of xfrm rules, which consume
a lot time on debug kernel and always TIMEOUT. Let's reduce the test
loop and see if it works.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240514095227.2597730-1-liuhangbin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf 2024-05-17

We've added 7 non-merge commits during the last 2 day(s) which contain
a total of 8 files changed, 20 insertions(+), 9 deletions(-).

The main changes are:

1) Fix KASAN slab-out-of-bounds in percpu_array_map_gen_lookup and add
   BPF selftests to cover this case, from Andrii Nakryiko.
   (Report https://lore.kernel.org/bpf/20240514231155.1004295-1-kuba@kernel.org/)

2) Fix two BPF selftests to adjust for kernel changes after fast-forwarding
   Linus' tree to make BPF CI all green again, from Martin KaFai Lau.

3) Fix libbpf feature detectors when using token_fd by adjusting the
   attribute size for memset to cover the former, also from Andrii Nakryiko.

4) Fix the description of 'src' in ALU instructions for the BPF ISA
   standardization doc, from Puranjay Mohan.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  selftests/bpf: Adjust btf_dump test to reflect recent change in file_operations
  selftests/bpf: Adjust test_access_variable_array after a kernel function name change
  selftests/bpf: add more variations of map-in-map situations
  bpf: save extended inner map info for percpu array maps as well
  MAINTAINERS: Update ARM64 BPF JIT maintainer
  bpf, docs: Fix the description of 'src' in ALU instructions
  libbpf: fix feature detectors when using token_fd
====================

Link: https://lore.kernel.org/r/20240517001600.23703-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The btf_dump test fails:

test_btf_dump_struct_data:FAIL:file_operations unexpected file_operations: actual '(struct file_operations){
	.owner = (struct module *)0xffffffffffffffff,
	.fop_flags = (fop_flags_t)4294967295,
	.llseek = (loff_t (*)(struct f' != expected '(struct file_operations){
	.owner = (struct module *)0xffffffffffffffff,
	.llseek = (loff_t (*)(struct file *, loff_t, int))0xffffffffffffffff,'

The "fop_flags" is a recent addition to the struct file_operations in
commit 210a03c9 ("fs: claw back a few FMODE_* bits")

This patch changes the test_btf_dump_struct_data() to reflect
this change.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20240516164310.2481460-1-martin.lau@linux.dev

After commit 4c3e509e ("sched/balancing: Rename load_balance() => sched_balance_rq()"),
the load_balance kernel function is renamed to sched_balance_rq.

This patch adjusts the fentry program in test_access_variable_array.c
to reflect this kernel function name change.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240516170140.2689430-1-martin.lau@linux.dev

Merge tag 'platform-drivers-x86-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver updates from Hans de Goede:

 - New drivers/platform/arm64 directory for arm64 embedded-controller
   drivers

 - New drivers:
    - Acer Aspire 1 embedded controllers (for arm64 models)
    - ACPI quickstart PNP0C32 buttons
    - Dell All-In-One backlight support (dell-uart-backlight)
    - Lenovo WMI camera buttons
    - Lenovo Yoga Tablet 2 Pro 1380F/L fast charging
    - MeeGoPad ANX7428 Type-C Cross Switch (power sequencing only)
    - MSI WMI sensors (fan speed sensors only for now)

 - Asus WMI:
    - 2024 ROG Mini-LED support
    - MCU powersave support
    - Vivobook GPU MUX support
    - Misc. other improvements

 - Ideapad laptop:
    - Export FnLock LED as LED class device
    - Switch platform profiles using thermal management key

 - Intel drivers:
    - IFS: various improvements
    - PMC: Lunar Lake support
    - SDSI: various improvements
    - TPMI/ISST: various improvements
    - tools: intel-speed-select: various improvements

 - MS Surface drivers:
    - Fan profile switching support
    - Surface Pro thermal sensors support

 - ThinkPad ACPI:
    - Reworked hotkey support to use sparse keymaps
    - Add support for new trackpoint-doubletap, Fn+N and Fn+G hotkeys

 - WMI core:
    - New WMI driver development guide

 - x86 Android tablets:
    - Lenovo Yoga Tablet 2 Pro 1380F/L support
    - Xiaomi MiPad 2 status LED and bezel touch buttons backlight
      support

 - Miscellaneous cleanups / fixes / improvements

* tag 'platform-drivers-x86-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (128 commits)
  platform/x86: Add new MeeGoPad ANX7428 Type-C Cross Switch driver
  devm-helpers: Fix a misspelled cancellation in the comments
  tools arch x86: Add dell-uart-backlight-emulator
  platform/x86: Add new Dell UART backlight driver
  platform/x86: x86-android-tablets: Create LED device for Xiaomi Pad 2 bottom bezel touch buttons
  platform/x86: x86-android-tablets: Xiaomi pad2 RGB LED fwnode updates
  platform/x86: x86-android-tablets: Pass struct device to init()
  platform/x86/amd: pmc: Add new ACPI ID AMDI000B
  platform/x86/amd: pmf: Add new ACPI ID AMDI0105
  platform/x86: p2sb: Don't init until unassigned resources have been assigned
  platform/surface: aggregator: Log critical errors during SAM probing
  platform/x86: ISST: Support SST-BF and SST-TF per level
  platform/x86/fujitsu-laptop: Replace sprintf() with sysfs_emit()
  tools/power/x86/intel-speed-select: v1.19 release
  tools/power/x86/intel-speed-select: Display CPU as None for -1
  tools/power/x86/intel-speed-select: SST BF/TF support per level
  tools/power/x86/intel-speed-select: Increase number of CPUs displayed
  tools/power/x86/intel-speed-select: Present all TRL levels for turbo-freq
  tools/power/x86/intel-speed-select: Fix display for unsupported levels
  tools/power/x86/intel-speed-select: Support multiple dies
  ...

Pull MTD updates from Miquel Raynal:
 "MTD:

   - Simon Glass wanted to support binman's output properties in order
     to check their validity using the binding checks and proposed
     changes with the missing properties as well as a binman compatible.

   - Krzysztof Kozlowski on his side shared a new yaml for describing
     Samsung's OneNAND interface.

   - The interface with NVMEM has also been slightly improved/fixed,
     especially now that OTP are also supported in the NAND subsystem.

   - Along with these changes, small cleanups have also been contributed
     around ID tables, structure sizes, arithmetic checks and comments.

  Raw NAND subsystem:

   - Two small fixes, one in the Hynix vendor code for properly
     returning an error which might have been ignored and another in the
     Davinci driver to properly synchronize the controller with the gpio
     domain.

  SPI NOR subsystem:

   - SPI NOR now uses div_u64() instead of div64_u64() in places where
     the divisor is 32 bits. Many 32 bit architectures can optimize this
     variant better than a full 64 bit divide"

* tag 'mtd/for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: spi-nor: replace unnecessary div64_u64() with div_u64()
  mtd: mchp23k256: drop unneeded MODULE_ALIAS
  dt-bindings: mtd: fixed-partition: Add binman compatibles
  dt-bindings: mtd: fixed-partitions: Add alignment properties
  mtd: maps: sa1100-flash: Prefer struct_size over open coded arithmetic
  mtd: core: Align comment with an action in mtd_otp_nvmem_add()
  mtd: rawnand: hynix: fixed typo
  mtd: rawnand: davinci: Add dummy read after sending command
  mtd: partitions: redboot: Added conversion of operands to a larger type
  dt-bindings: mtd: Add Samsung S5Pv210 OneNAND
  mtd: core: Don't fail mtd_otp_nvmem_add() if OTP is unsupported
  mtd: core: Report error if first mtd_otp_size() call fails in mtd_otp_nvmem_add()

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Increase the timeout period of the ACMD41 command
   - Add card entry for quirks to debugfs
   - Add mmc_gpiod_set_cd_config() function
   - Store owner from SDIO modules with sdio_register_driver()

  MMC host:
   - atmel-mci: Some cleanups and a switch to use dev_err_probe()
   - renesas_sdhi:
      - Add support for RZ/G2L, RZ/G3S and RZ/V2M variants
      - Set the SDBUF after reset
   - sdhci: Add support for "Tuning Error" interrupts
   - sdhci-acpi:
      - Add quirk to enable pull-up on the card-detect GPIO on Asus
        T100TA
      - Disable write protect detection on Toshiba WT10-A
      - Fix Lenovo Yoga Tablet 2 Pro 1380 sdcard slot not working
   - sdhci_am654:
      - Re-work and fix the tuning support for multiple speed-modes
      - Add tuning algorithm for delay chain
   - sdhci-esdhc-imx: Add NXP S32G3 support
   - sdhci-of-dwcmshc:
      - Add tuning support for Sophgo CV1800B and SG200X
      - Implement SDHCI CQE support
   - sdhci-pci-gli: Use the proper pci_set_power_state() instead of
     PMCSR writes"

  MEMSTICK:
   - Convert a couple of drivers to use the ->remove_new() callback"

* tag 'mmc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits)
  mmc: renesas_sdhi: Add compatible string for RZ/G2L family, RZ/G3S, and RZ/V2M SoCs
  dt-bindings: mmc: renesas,sdhi: Document RZ/G2L family compatibility
  dt-bindings: mmc: renesas,sdhi: Group single const value items into an enum list
  mmc: renesas_sdhi: Set the SDBUF after reset
  mmc: core: Increase the timeout period of the ACMD41 command
  mmc: core: Convert to use __mmc_poll_for_busy() SD_APP_OP_COND too
  mmc: atmel-mci: Switch to use dev_err_probe()
  mmc: atmel-mci: Incapsulate used to be a platform data into host structure
  mmc: atmel-mci: Replace platform device pointer by generic one
  mmc: atmel-mci: Use temporary variable for struct device
  mmc: atmel-mci: Get rid of platform data leftovers
  mmc: sdhci-of-dwcmshc: Add tuning support for Sophgo CV1800B and SG200X
  mmc: sdhci-of-dwcmshc: Remove useless "&" of th1520_execute_tuning
  mmc: sdhci-s3c: Choose sdhci_ops based on variant
  mmc: sdhci_am654: Constify struct sdhci_ops
  mmc: sdhci-sprd: Constify struct sdhci_ops
  mmc: sdhci-omap: Constify struct sdhci_ops
  mmc: sdhci-esdhc-mcf: Constify struct sdhci_ops
  mmc: slot-gpio: Use irq_handler_t type
  mmc: sdhci-acpi: Add quirk to enable pull-up on the card-detect GPIO on Asus T100TA
  ...

Pull pmdomain updates from Ulf Hansson:
 "pmdomain core:
   - Don't clear suspended_count at genpd_prepare()
   - Update the rejected/usage counters at system suspend too

  pmdomain providers:
   - ti-sci: Fix duplicate PD referrals
   - mediatek: Add MT8188 buck isolation setting
   - renesas: Add R-Car M3-W power-off delay quirk
   - renesas: Split R-Car M3-W and M3-W+ sub-drivers

  cpuidle-psci:
   - Update MAINTAINERS to set a git for DT IDLE PM DOMAIN/ARM PSCI PM
     DOMAIN
   - Update init level to core_initcall()
   - Drop superfluous wrappers psci_dt_attach|detach_cpu()"

* tag 'pmdomain-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
  pmdomain: ti-sci: Fix duplicate PD referrals
  pmdomain: core: Don't clear suspended_count at genpd_prepare()
  pmdomain: core: Update the rejected/usage counters at system suspend too
  pmdomain: renesas: rcar-sysc: Add R-Car M3-W power-off delay quirk
  pmdomain: renesas: rcar-sysc: Remove rcar_sysc_nullify() helper
  pmdomain: renesas: rcar-sysc: Split R-Car M3-W and M3-W+ sub-drivers
  pmdomain: renesas: rcar-sysc: Absorb rcar_sysc_ch into rcar_sysc_pd
  MAINTAINERS: Add a git for the DT IDLE PM DOMAIN
  MAINTAINERS: Add a git for the ARM PSCI PM DOMAIN
  cpuidle: psci: Update init level to core_initcall()
  cpuidle: psci: Drop superfluous wrappers psci_dt_attach|detach_cpu()
  pmdomain: mediatek: Add MT8188 buck isolation setting
  pmdomain: mediatek: scpsys: drop driver owner assignment

Pull media updates from Mauro Carvalho Chehab:

 - New V4L2 ioctl VIDIOC_REMOVE_BUFS

 - experimental support for using generic metaformats on V4L2 core

 - New drivers: Intel IPU6 controller driver, Broadcom BCM283x/BCM271x

 - More cleanups at atomisp driver

 - Usual bunch of driver cleanups, improvements and fixes

* tag 'media/v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (328 commits)
  media: bcm2835-unicam: Depend on COMMON_CLK
  Revert "media: v4l2-ctrls: show all owned controls in log_status"
  media: ov2740: Ensure proper reset sequence on probe()
  media: intel/ipu6: Don't print user-triggerable errors to kernel log
  media: bcm2835-unicam: Fix driver path in MAINTAINERS
  media: bcm2835-unicam: Fix a NULL vs IS_ERR() check
  media: bcm2835-unicam: Do not print error when irq not found
  media: bcm2835-unicam: Do not replace IRQ retcode during probe
  media: bcm2835-unicam: Convert to platform remove callback returning void
  media: media: intel/ipu6: Fix spelling mistake "remappinp" -> "remapping"
  media: intel/ipu6: explicitly include vmalloc.h
  media: cec.h: Fix kerneldoc
  media: uvcvideo: Refactor iterators
  media: v4l: async: refactor v4l2_async_create_ancillary_links
  media: intel/ipu6: Don't re-allocate memory for firmware
  media: dvb-frontends: tda10048: Fix integer overflow
  media: tc358746: Use the correct div_ function
  media: i2c: st-mipid02: Use the correct div function
  media: tegra-vde: Refactor timeout handling
  media: stk1160: Use min macro
  ...