- 02 May, 2020 39 commits
-
-
Fangrui Song authored
[ Upstream commit c9a4ef66 ] In assembly, many instances of __emit_inst(x) expand to a directive. In a few places __emit_inst(x) is used as an assembler macro argument. For example, in arch/arm64/kvm/hyp/entry.S ALTERNATIVE(nop, SET_PSTATE_PAN(1), ARM64_HAS_PAN, CONFIG_ARM64_PAN) expands to the following by the C preprocessor: alternative_insn nop, .inst (0xd500401f | ((0) << 16 | (4) << 5) | ((!!1) << 8)), 4, 1 Both comma and space are separators, with an exception that content inside a pair of parentheses/quotes is not split, so the clang integrated assembler splits the arguments to: nop, .inst, (0xd500401f | ((0) << 16 | (4) << 5) | ((!!1) << 8)), 4, 1 GNU as preprocesses the input with do_scrub_chars(). Its arm64 backend (along with many other non-x86 backends) sees: alternative_insn nop,.inst(0xd500401f|((0)<<16|(4)<<5)|((!!1)<<8)),4,1 # .inst(...) is parsed as one argument while its x86 backend sees: alternative_insn nop,.inst (0xd500401f|((0)<<16|(4)<<5)|((!!1)<<8)),4,1 # The extra space before '(' makes the whole .inst (...) parsed as two arguments The non-x86 backend's behavior is considered unintentional (https://sourceware.org/bugzilla/show_bug.cgi?id=25750). So drop the space separator inside `.inst (...)` to make the clang integrated assembler work. Suggested-by:
Ilie Halip <ilie.halip@gmail.com> Signed-off-by:
Fangrui Song <maskray@google.com> Reviewed-by:
Mark Rutland <mark.rutland@arm.com> Link: https://github.com/ClangBuiltLinux/linux/issues/939Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Hui Wang authored
[ Upstream commit 9a641848 ] Before the pci_driver->probe() is called, the pci subsystem calls runtime_forbid() and runtime_get_sync() on this pci dev, so only call runtime_put_autosuspend() is not enough to enable the runtime_pm on this device. For controllers with vgaswitcheroo feature, the pci/quirks.c will call runtime_allow() for this dev, then the controllers could enter rt_idle/suspend/resume, but for non-vgaswitcheroo controllers like Intel hda controllers, the runtime_pm is not enabled because the runtime_allow() is not called. Since it is no harm calling runtime_allow() twice, here let hda driver call runtime_allow() for all controllers. Then the runtime_pm is enabled on all controllers after the put_autosuspend() is called. Signed-off-by:
Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20200414142725.6020-1-hui.wang@canonical.comSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Juergen Gross authored
[ Upstream commit 6b51fd3f ] xenbus_map_ring_valloc() maps a ring page and returns the status of the used grant (0 meaning success). There are Xen hypervisors which might return the value 1 for the status of a failed grant mapping due to a bug. Some callers of xenbus_map_ring_valloc() test for errors by testing the returned status to be less than zero, resulting in no error detected and crashing later due to a not available ring page. Set the return value of xenbus_map_ring_valloc() to GNTST_general_error in case the grant status reported by Xen is greater than zero. This is part of XSA-316. Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Wei Liu <wl@xen.org> Link: https://lore.kernel.org/r/20200326080358.1018-1-jgross@suse.comSigned-off-by:
-
Josh Poimboeuf authored
[ Upstream commit 8782e7ca ] Historically, the relocation symbols for ORC entries have only been section symbols: .text+0: sp:sp+8 bp:(und) type:call end:0 However, the Clang assembler is aggressive about stripping section symbols. In that case we will need to use function symbols: freezing_slow_path+0: sp:sp+8 bp:(und) type:call end:0 In preparation for the generation of such entries in "objtool orc generate", add support for reading them in "objtool orc dump". Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Miroslav Benes <mbenes@suse.cz> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/b811b5eb1a42602c3b523576dc5efab9ad1c174d.1585761021.git.jpoimboe@redhat.comSigned-off-by:
-
Josh Poimboeuf authored
[ Upstream commit bd841d61 ] CONFIG_UBSAN_TRAP causes GCC to emit a UD2 whenever it encounters an unreachable code path. This includes __builtin_unreachable(). Because the BUG() macro uses __builtin_unreachable() after it emits its own UD2, this results in a double UD2. In this case objtool rightfully detects that the second UD2 is unreachable: init/main.o: warning: objtool: repair_env_string()+0x1c8: unreachable instruction We weren't able to figure out a way to get rid of the double UD2s, so just silence the warning. Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
-
Bodo Stroesser authored
[ Upstream commit 066f79a5 ] In case command ring buffer becomes inconsistent, tcmu sets device flag TCMU_DEV_BIT_BROKEN. If the bit is set, tcmu rejects new commands from LIO core with TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE, and no longer processes completions from the ring. The reset_ring attribute can be used to completely clean up the command ring, so after reset_ring the ring no longer is inconsistent. Therefore reset_ring also should reset bit TCMU_DEV_BIT_BROKEN to allow normal processing. Link: https://lore.kernel.org/r/20200409101026.17872-1-bstroesser@ts.fujitsu.comAcked-by:
Mike Christie <mchristi@redhat.com> Signed-off-by:
Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Bodo Stroesser authored
[ Upstream commit 8fed04eb ] Creation of the response to READ FULL STATUS fails for FC based reservations. Reason is the too high loop limit (< 24) in fc_get_pr_transport_id(). The string representation of FC WWPN is 23 chars long only ("11:22:33:44:55:66:77:88"). So when i is 23, the loop body is executed a last time for the ending '\0' of the string and thus hex2bin() reports an error. Link: https://lore.kernel.org/r/20200408132610.14623-3-bstroesser@ts.fujitsu.comSigned-off-by:
-
Roy Spliet authored
[ Upstream commit 3ba21113 ] This fixes runtime PM not working after a suspend-to-RAM cycle at least for the codec-less HDA device found on NVIDIA GPUs. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043Signed-off-by:
Roy Spliet <nouveau@spliet.org> Link: https://lore.kernel.org/r/20200413082034.25166-7-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
[ Upstream commit 9479e75f ] Currently, when the HD-audio controller driver doesn't detect any codecs, it tries to abort the probe. But this abort happens at the delayed probe, i.e. the primary probe call already returned success, hence the driver is never unbound until user does so explicitly. As a result, it may leave the HD-audio device in the running state without the runtime PM. More badly, if the device is a HD-audio bus that is tied with a GPU, GPU cannot reach to the full power down and consumes unnecessarily much power. This patch changes the logic after no-codec situation; it continues probing without the further codec initialization but keep the controller driver running normally. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043Tested-by:
-
Darrick J. Wong authored
[ Upstream commit c142932c ] In the reflink extent remap function, it turns out that uirec (the block mapping corresponding only to the part of the passed-in mapping that got unmapped) was not fully initialized. Specifically, br_state was not being copied from the passed-in struct to the uirec. This could lead to unpredictable results such as the reflinked mapping being marked unwritten in the destination file. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
-
Olaf Hering authored
[ Upstream commit 97d9f1c4 ] A few kernel features depend on ms_hyperv.misc_features, but unlike its siblings ->features and ->hints, the value was never reported during boot. Signed-off-by:
Olaf Hering <olaf@aepfle.de> Link: https://lore.kernel.org/r/20200407172739.31371-1-olaf@aepfle.deSigned-off-by:
Wei Liu <wei.liu@kernel.org> Signed-off-by:
-
Martin Fuzzey authored
[ Upstream commit da722186 ] On some SoCs, such as the i.MX6, it is necessary to set a bit in the SoC level GPR register before suspending for wake on lan to work. The fec platform callback sleep_mode_enable was intended to allow this but the platform implementation was NAK'd back in 2015 [1] This means that, currently, wake on lan is broken on mainline for the i.MX6 at least. So implement the required bit setting in the fec driver by itself by adding a new optional DT property indicating the GPR register and adding the offset and bit information to the driver. [1] https://www.spinics.net/lists/netdev/msg310922.htmlSigned-off-by:
Martin Fuzzey <martin.fuzzey@flowbird.group> Signed-off-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Luke Nelson authored
[ Upstream commit aee194b1 ] This patch fixes an encoding bug in emit_stx for BPF_B when the source register is BPF_REG_FP. The current implementation for BPF_STX BPF_B in emit_stx saves one REX byte when the operands can be encoded using Mod-R/M alone. The lower 8 bits of registers %rax, %rbx, %rcx, and %rdx can be accessed without using a REX prefix via %al, %bl, %cl, and %dl, respectively. Other registers, (e.g., %rsi, %rdi, %rbp, %rsp) require a REX prefix to use their 8-bit equivalents (%sil, %dil, %bpl, %spl). The current code checks if the source for BPF_STX BPF_B is BPF_REG_1 or BPF_REG_2 (which map to %rdi and %rsi), in which case it emits the required REX prefix. However, it misses the case when the source is BPF_REG_FP (mapped to %rbp). The result is that BPF_STX BPF_B with BPF_REG_FP as the source operand will read from register %ch instead of the correct %bpl. This patch fixes the problem by fixing and refactoring the check on which registers need the extra REX byte. Since no BPF registers map to %rsp, there is no need to handle %spl. Fixes: 62258278 ("net: filter: x86: internal BPF JIT") Signed-off-by:
Xi Wang <xi.wang@gmail.com> Signed-off-by:
Luke Nelson <luke.r.nels@gmail.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200418232655.23870-1-luke.r.nels@gmail.comSigned-off-by:
-
Eric Biggers authored
commit 10a98cb1 upstream. Leaving PF_MEMALLOC set when exiting a kthread causes it to remain set during do_exit(). That can confuse things. In particular, if BSD process accounting is enabled, then do_exit() writes data to an accounting file. If that file has FS_SYNC_FL set, then this write occurs synchronously and can misbehave if PF_MEMALLOC is set. For example, if the accounting file is located on an XFS filesystem, then a WARN_ON_ONCE() in iomap_do_writepage() is triggered and the data doesn't get written when it should. Or if the accounting file is located on an ext4 filesystem without a journal, then a WARN_ON_ONCE() in ext4_write_inode() is triggered and the inode doesn't get written. Fix this in xfsaild() by using the helper functions to save and restore PF_MEMALLOC. This can be reproduced as follows in the kvm-xfstests test appliance modified to add the 'acct' Debian package, and with kvm-xfstests's recommended kconfig modified to add CONFIG_BSD_PROCESS_ACCT=y: mkfs.xfs -f /dev/vdb mount /vdb touch /vdb/file chattr +S /vdb/file accton /vdb/file mkfs.xfs -f /dev/vdc mount /vdc umount /vdc It causes: WARNING: CPU: 1 PID: 336 at fs/iomap/buffered-io.c:1534 CPU: 1 PID: 336 Comm: xfsaild/vdc Not tainted 5.6.0-rc5 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20191223_100556-anatol 04/01/2014 RIP: 0010:iomap_do_writepage+0x16b/0x1f0 fs/iomap/buffered-io.c:1534 [...] Call Trace: write_cache_pages+0x189/0x4d0 mm/page-writeback.c:2238 iomap_writepages+0x1c/0x33 fs/iomap/buffered-io.c:1642 xfs_vm_writepages+0x65/0x90 fs/xfs/xfs_aops.c:578 do_writepages+0x41/0xe0 mm/page-writeback.c:2344 __filemap_fdatawrite_range+0xd2/0x120 mm/filemap.c:421 file_write_and_wait_range+0x71/0xc0 mm/filemap.c:760 xfs_file_fsync+0x7a/0x2b0 fs/xfs/xfs_file.c:114 generic_write_sync include/linux/fs.h:2867 [inline] xfs_file_buffered_aio_write+0x379/0x3b0 fs/xfs/xfs_file.c:691 call_write_iter include/linux/fs.h:1901 [inline] new_sync_write+0x130/0x1d0 fs/read_write.c:483 __kernel_write+0x54/0xe0 fs/read_write.c:515 do_acct_process+0x122/0x170 kernel/acct.c:522 slow_acct_process kernel/acct.c:581 [inline] acct_process+0x1d4/0x27c kernel/acct.c:607 do_exit+0x83d/0xbc0 kernel/exit.c:791 kthread+0xf1/0x140 kernel/kthread.c:257 ret_from_fork+0x27/0x50 arch/x86/entry/entry_64.S:352 This bug was originally reported by syzbot at https://lore.kernel.org/r/0000000000000e7156059f751d7b@google.com. Reported-by: syzbot+1f9dc49e8de2582d90c2@syzkaller.appspotmail.com Signed-off-by:
Eric Biggers <ebiggers@google.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yang Shi authored
commit 94b7cc01 upstream. Syzbot reported the below lockdep splat: WARNING: possible irq lock inversion dependency detected 5.6.0-rc7-syzkaller #0 Not tainted -------------------------------------------------------- syz-executor.0/10317 just changed the state of lock: ffff888021d16568 (&(&info->lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:338 [inline] ffff888021d16568 (&(&info->lock)->rlock){+.+.}, at: shmem_mfill_atomic_pte+0x1012/0x21c0 mm/shmem.c:2407 but this lock was taken by another, SOFTIRQ-safe lock in the past: (&(&xa->xa_lock)->rlock#5){..-.} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(&info->lock)->rlock); local_irq_disable(); lock(&(&xa->xa_lock)->rlock#5); lock(&(&info->lock)->rlock); <Interrupt> lock(&(&xa->xa_lock)->rlock#5); *** DEADLOCK *** The full report is quite lengthy, please see: https://lore.kernel.org/linux-mm/alpine.LSU.2.11.2004152007370.13597@eggly.anvils/T/#m813b412c5f78e25ca8c6c7734886ed4de43f241d It is because CPU 0 held info->lock with IRQ enabled in userfaultfd_copy path, then CPU 1 is splitting a THP which held xa_lock and info->lock in IRQ disabled context at the same time. If softirq comes in to acquire xa_lock, the deadlock would be triggered. The fix is to acquire/release info->lock with *_irq version instead of plain spin_{lock,unlock} to make it softirq safe. Fixes: 4c27fe4c ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support") Reported-by: syzbot+e27980339d305f2dbfd9@syzkaller.appspotmail.com Signed-off-by:
Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Tested-by: syzbot+e27980339d305f2dbfd9@syzkaller.appspotmail.com Acked-by:
Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Link: http://lkml.kernel.org/r/1587061357-122619-1-git-send-email-yang.shi@linux.alibaba.comSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Luke Nelson authored
commit 5fa9a98f upstream. The current JIT uses the following sequence to zero-extend into the upper 32 bits of the destination register for BPF_LDX BPF_{B,H,W}, when the destination register is not on the stack: EMIT3(0xC7, add_1reg(0xC0, dst_hi), 0); The problem is that C7 /0 encodes a MOV instruction that requires a 4-byte immediate; the current code emits only 1 byte of the immediate. This means that the first 3 bytes of the next instruction will be treated as the rest of the immediate, breaking the stream of instructions. This patch fixes the problem by instead emitting "xor dst_hi,dst_hi" to clear the upper 32 bits. This fixes the problem and is more efficient than using MOV to load a zero immediate. This bug may not be currently triggerable as BPF_REG_AX is the only register not stored on the stack and the verifier uses it in a limited way, and the verifier implements a zero-extension optimization. But the JIT should avoid emitting incorrect encodings regardless. Fixes: 03f5781b ("bpf, x86_32: add eBPF JIT compiler for ia32") Signed-off-by:
H. Peter Anvin (Intel) <hpa@zytor.com> Acked-by:
Wang YanQing <udknight@gmail.com> Link: https://lore.kernel.org/bpf/20200422173630.8351-1-luke.r.nels@gmail.comSigned-off-by:
-
Ian Rogers authored
commit f3bed55e upstream. Current logic yields the child task as the parent. Before: $ perf record bash -c "perf list > /dev/null" $ perf script -D |grep 'FORK\|EXIT' 4387036190981094 0x5a70 [0x30]: PERF_RECORD_FORK(10472:10472):(10470:10470) 4387036606207580 0xf050 [0x30]: PERF_RECORD_EXIT(10472:10472):(10472:10472) 4387036607103839 0x17150 [0x30]: PERF_RECORD_EXIT(10470:10470):(10470:10470) ^ Note the repeated values here -------------------/ After: 383281514043 0x9d8 [0x30]: PERF_RECORD_FORK(2268:2268):(2266:2266) 383442003996 0x2180 [0x30]: PERF_RECORD_EXIT(2268:2268):(2266:2266) 383451297778 0xb70 [0x30]: PERF_RECORD_EXIT(2266:2266):(2265:2265) Fixes: 94d5d1b2 ("perf_counter: Report the cloning task as parent on perf_counter_fork()") Reported-by:
KP Singh <kpsingh@google.com> Signed-off-by:
Ian Rogers <irogers@google.com> Signed-off-by:
-
Niklas Schnelle authored
commit a019b361 upstream. On s390 FORCE_MAX_ZONEORDER is 9 instead of 11, thus a larger kzalloc() allocation as done for the firmware tracer will always fail. Looking at mlx5_fw_tracer_save_trace(), it is actually the driver itself that copies the debug data into the trace array and there is no need for the allocation to be contiguous in physical memory. We can therefor use kvzalloc() instead of kzalloc() and get rid of the large contiguous allcoation. Fixes: f53aaa31 ("net/mlx5: FW tracer, implement tracer logic") Signed-off-by:
Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Toke Høiland-Jørgensen authored
commit bc23d0e3 upstream. When the kernel is built with CONFIG_DEBUG_PER_CPU_MAPS, the cpumap code can trigger a spurious warning if CONFIG_CPUMASK_OFFSTACK is also set. This happens because in this configuration, NR_CPUS can be larger than nr_cpumask_bits, so the initial check in cpu_map_alloc() is not sufficient to guard against hitting the warning in cpumask_check(). Fix this by explicitly checking the supplied key against the nr_cpumask_bits variable before calling cpu_possible(). Fixes: 6710e112 ("bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP") Reported-by:
Xiumei Mu <xmu@redhat.com> Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200416083120.453718-1-toke@redhat.comSigned-off-by:
-
Nicolas Saenz Julienne authored
commit 90444b95 upstream. Since its inception the module was meant to be disabled by default, but the original commit failed to add the relevant property. Fixes: 4aba4cf8 ("ARM: dts: bcm2835: Add the DSI module nodes and clocks") Signed-off-by:
Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Bjorn Helgaas authored
commit 0a8f4102 upstream. Some Google Apex Edge TPU devices have a class code of 0 (PCI_CLASS_NOT_DEFINED). This prevents the PCI core from assigning resources for the Apex BARs because __dev_sort_resources() ignores classless devices, host bridges, and IOAPICs. On x86, firmware typically assigns those resources, so this was not a problem. But on some architectures, firmware does *not* assign BARs, and since the PCI core didn't do it either, the Apex device didn't work correctly: apex 0000:01:00.0: can't enable device: BAR 0 [mem 0x00000000-0x00003fff 64bit pref] not claimed apex 0000:01:00.0: error enabling PCI device f390d08d ("staging: gasket: apex: fixup undefined PCI class") added a quirk to fix the class code, but it was in the apex driver, and if the driver was built as a module, it was too late to help. Move the quirk to the PCI core, where it will always run early enough that the PCI core will assign resources if necessary. Link: https://lore.kernel.org/r/CAEzXK1r0Er039iERnc2KJ4jn7ySNUOG9H=Ha8TD8XroVqiZjgg@mail.gmail.com Fixes: f390d08d ("staging: gasket: apex: fixup undefined PCI class") Reported-by:
Luís Mendes <luis.p.mendes@gmail.com> Debugged-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: Todd Poynor <toddpoynor@google.com> Signed-off-by:
-
Kai-Heng Feng authored
commit 2880325b upstream. The ASMedia USB XHCI Controller claims to support generating PME# while in D0: 01:00.0 USB controller: ASMedia Technology Inc. Device 2142 (prog-if 30 [XHCI]) Subsystem: SUNIX Co., Ltd. Device 312b Capabilities: [78] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME- However PME# only gets asserted when plugging USB 2.0 or USB 1.1 devices, but not for USB 3.0 devices. Remove PCI_PM_CAP_PME_D0 to avoid using PME under D0. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205919 Link: https://lore.kernel.org/r/20191219192006.16270-1-kai.heng.feng@canonical.comSigned-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Chuck Lever authored
commit 23cf1ee1 upstream. Utilize the xpo_release_rqst transport method to ensure that each rqstp's svc_rdma_recv_ctxt object is released even when the server cannot return a Reply for that rqstp. Without this fix, each RPC whose Reply cannot be sent leaks one svc_rdma_recv_ctxt. This is a 2.5KB structure, a 4KB DMA-mapped Receive buffer, and any pages that might be part of the Reply message. The leak is infrequent unless the network fabric is unreliable or Kerberos is in use, as GSS sequence window overruns, which result in connection loss, are more common on fast transports. Fixes: 3a88092e ("svcrdma: Preserve Receive buffer until svc_rdma_sendto") Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
Chuck Lever authored
commit e28b4fc6 upstream. I hit this while testing nfsd-5.7 with kernel memory debugging enabled on my server: Mar 30 13:21:45 klimt kernel: BUG: unable to handle page fault for address: ffff8887e6c279a8 Mar 30 13:21:45 klimt kernel: #PF: supervisor read access in kernel mode Mar 30 13:21:45 klimt kernel: #PF: error_code(0x0000) - not-present page Mar 30 13:21:45 klimt kernel: PGD 3601067 P4D 3601067 PUD 87c519067 PMD 87c3e2067 PTE 800ffff8193d8060 Mar 30 13:21:45 klimt kernel: Oops: 0000 [#1] SMP DEBUG_PAGEALLOC PTI Mar 30 13:21:45 klimt kernel: CPU: 2 PID: 1933 Comm: nfsd Not tainted 5.6.0-rc6-00040-g881e87a3c6f9 #1591 Mar 30 13:21:45 klimt kernel: Hardware name: Supermicro Super Server/X10SRL-F, BIOS 1.0c 09/09/2015 Mar 30 13:21:45 klimt kernel: RIP: 0010:svc_rdma_post_chunk_ctxt+0xab/0x284 [rpcrdma] Mar 30 13:21:45 klimt kernel: Code: c1 83 34 02 00 00 29 d0 85 c0 7e 72 48 8b bb a0 02 00 00 48 8d 54 24 08 4c 89 e6 48 8b 07 48 8b 40 20 e8 5a 5c 2b e1 41 89 c6 <8b> 45 20 89 44 24 04 8b 05 02 e9 01 00 85 c0 7e 33 e9 5e 01 00 00 Mar 30 13:21:45 klimt kernel: RSP: 0018:ffffc90000dfbdd8 EFLAGS: 00010286 Mar 30 13:21:45 klimt kernel: RAX: 0000000000000000 RBX: ffff8887db8db400 RCX: 0000000000000030 Mar 30 13:21:45 klimt kernel: RDX: 0000000000000040 RSI: 0000000000000000 RDI: 0000000000000246 Mar 30 13:21:45 klimt kernel: RBP: ffff8887e6c27988 R08: 0000000000000000 R09: 0000000000000004 Mar 30 13:21:45 klimt kernel: R10: ffffc90000dfbdd8 R11: 00c068ef00000000 R12: ffff8887eb4e4a80 Mar 30 13:21:45 klimt kernel: R13: ffff8887db8db634 R14: 0000000000000000 R15: ffff8887fc931000 Mar 30 13:21:45 klimt kernel: FS: 0000000000000000(0000) GS:ffff88885bd00000(0000) knlGS:0000000000000000 Mar 30 13:21:45 klimt kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Mar 30 13:21:45 klimt kernel: CR2: ffff8887e6c279a8 CR3: 000000081b72e002 CR4: 00000000001606e0 Mar 30 13:21:45 klimt kernel: Call Trace: Mar 30 13:21:45 klimt kernel: ? svc_rdma_vec_to_sg+0x7f/0x7f [rpcrdma] Mar 30 13:21:45 klimt kernel: svc_rdma_send_write_chunk+0x59/0xce [rpcrdma] Mar 30 13:21:45 klimt kernel: svc_rdma_sendto+0xf9/0x3ae [rpcrdma] Mar 30 13:21:45 klimt kernel: ? nfsd_destroy+0x51/0x51 [nfsd] Mar 30 13:21:45 klimt kernel: svc_send+0x105/0x1e3 [sunrpc] Mar 30 13:21:45 klimt kernel: nfsd+0xf2/0x149 [nfsd] Mar 30 13:21:45 klimt kernel: kthread+0xf6/0xfb Mar 30 13:21:45 klimt kernel: ? kthread_queue_delayed_work+0x74/0x74 Mar 30 13:21:45 klimt kernel: ret_from_fork+0x3a/0x50 Mar 30 13:21:45 klimt kernel: Modules linked in: ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue ib_umad ib_ipoib mlx4_ib sb_edac x86_pkg_temp_thermal iTCO_wdt iTCO_vendor_support coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel glue_helper crypto_simd cryptd pcspkr rpcrdma i2c_i801 rdma_ucm lpc_ich mfd_core ib_iser rdma_cm iw_cm ib_cm mei_me raid0 libiscsi mei sg scsi_transport_iscsi ioatdma wmi ipmi_si ipmi_devintf ipmi_msghandler acpi_power_meter nfsd nfs_acl lockd auth_rpcgss grace sunrpc ip_tables xfs libcrc32c mlx4_en sd_mod sr_mod cdrom mlx4_core crc32c_intel igb nvme i2c_algo_bit ahci i2c_core libahci nvme_core dca libata t10_pi qedr dm_mirror dm_region_hash dm_log dm_mod dax qede qed crc8 ib_uverbs ib_core Mar 30 13:21:45 klimt kernel: CR2: ffff8887e6c279a8 Mar 30 13:21:45 klimt kernel: ---[ end trace 87971d2ad3429424 ]--- It's absolutely not safe to use resources pointed to by the @send_wr argument of ib_post_send() _after_ that function returns. Those resources are typically freed by the Send completion handler, which can run before ib_post_send() returns. Thus the trace points currently around ib_post_send() in the server's RPC/RDMA transport are a hazard, even when they are disabled. Rearrange them so that they touch the Work Request only _before_ ib_post_send() is invoked. Fixes: bd2abef3 ("svcrdma: Trace key RDMA API events") Fixes: 4201c746 ("svcrdma: Introduce svc_rdma_send_ctxt") Signed-off-by:
-
Brian Foster authored
commit 4b674b9a upstream. The filesystem freeze sequence in XFS waits on any background eofblocks or cowblocks scans to complete before the filesystem is quiesced. At this point, the freezer has already stopped the transaction subsystem, however, which means a truncate or cowblock cancellation in progress is likely blocked in transaction allocation. This results in a deadlock between freeze and the associated scanner. Fix this problem by holding superblock write protection across calls into the block reapers. Since protection for background scans is acquired from the workqueue task context, trylock to avoid a similar deadlock between freeze and blocking on the write lock. Fixes: d6b636eb ("xfs: halt auto-reclamation activities while rebuilding rmap") Reported-by:
Paul Furtado <paulfurtado91@gmail.com> Signed-off-by:
Chandan Rajendra <chandanrlinux@gmail.com> Reviewed-by:
Allison Collins <allison.henderson@oracle.com> Reviewed-by:
-
Jason Gunthorpe authored
commit c799fca8 upstream. Positive return values are also failures that don't set val, although this probably can't happen. Fixes gcc 10 warning: drivers/net/ethernet/chelsio/cxgb4/t4_hw.c: In function ‘t4_phy_fw_ver’: drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:3747:14: warning: ‘val’ may be used uninitialized in this function [-Wmaybe-uninitialized] 3747 | *phy_fw_ver = val; Fixes: 01b69614 ("cxgb4: Add PHY firmware support for T420-BT cards") Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
David Howells authored
commit 0e631eee upstream. Fix the DATA packet transmission to disable nofrag for UDPv4 on an AF_INET6 socket as well as UDPv6 when trying to transmit fragmentably. Without this, packets filled to the normal size used by the kernel AFS client of 1412 bytes be rejected by udp_sendmsg() with EMSGSIZE immediately. The ->sk_error_report() notification hook is called, but rxrpc doesn't generate a trace for it. This is a temporary fix; a more permanent solution needs to involve changing the size of the packets being filled in accordance with the MTU, which isn't currently done in AF_RXRPC. The reason for not doing so was that, barring the last packet in an rx jumbo packet, jumbos can only be assembled out of 1412-byte packets - and the plan was to construct jumbos on the fly at transmission time. Also, there's no point turning on IPV6_MTU_DISCOVER, since IPv6 has to engage in this anyway since fragmentation is only done by the sender. We can then condense the switch-statement in rxrpc_send_data_packet(). Fixes: 75b54cb5 ("rxrpc: Add IPv6 support") Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Wolfram Sang authored
commit edb2c9dd upstream. device_property_read_u32() returns errno or 0, so we should use the integer variable 'ret' and not the u32 'val' to hold the retval. Fixes: 0560ad57 ("i2c: altera: Add Altera I2C Controller driver") Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Vasily Averin authored
commit e1e8399e upstream. New struct nfsd4_blocked_lock allocated in find_or_allocate_block() does not initialized nbl_list and nbl_lru. If conflock allocation fails rollback can call list_del_init() access uninitialized fields and corrupt memory. v2: just initialize nbl_list and nbl_lru right after nbl allocation. Fixes: 76d348fa ("nfsd: have nfsd4_lock use blocking locks for v4.1+ lock") Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Reviewed-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
-
Shengjiu Wang authored
commit 1e060a45 upstream. After suspend & resume, wm8960_hw_params may be called when bias_level is not SND_SOC_BIAS_ON, then wm8960_configure_clocking is not called. But if sample rate is changed at that time, then the output clock rate will be not correct. So judgement of bias_level is SND_SOC_BIAS_ON in wm8960_hw_params is not necessary and it causes above issue. Fixes: 3176bf2d ("ASoC: wm8960: update pll and clock setting function") Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/1587468525-27514-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Philipp Puschmann authored
commit 9df8ba7c upstream. If probe fails after enabling the regulators regulator_put is called for each supply without having them disabled before. This produces some warnings like WARNING: CPU: 0 PID: 90 at drivers/regulator/core.c:2044 _regulator_put.part.0+0x154/0x15c [<c010f7a8>] (unwind_backtrace) from [<c010c544>] (show_stack+0x10/0x14) [<c010c544>] (show_stack) from [<c012b640>] (__warn+0xd0/0xf4) [<c012b640>] (__warn) from [<c012b9b4>] (warn_slowpath_fmt+0x64/0xc4) [<c012b9b4>] (warn_slowpath_fmt) from [<c04c4064>] (_regulator_put.part.0+0x154/0x15c) [<c04c4064>] (_regulator_put.part.0) from [<c04c4094>] (regulator_put+0x28/0x38) [<c04c4094>] (regulator_put) from [<c04c40cc>] (regulator_bulk_free+0x28/0x38) [<c04c40cc>] (regulator_bulk_free) from [<c0579b2c>] (release_nodes+0x1d0/0x22c) [<c0579b2c>] (release_nodes) from [<c05756dc>] (really_probe+0x108/0x34c) [<c05756dc>] (really_probe) from [<c0575aec>] (driver_probe_device+0xb8/0x16c) [<c0575aec>] (driver_probe_device) from [<c0575d40>] (device_driver_attach+0x58/0x60) [<c0575d40>] (device_driver_attach) from [<c0575da0>] (__driver_attach+0x58/0xcc) [<c0575da0>] (__driver_attach) from [<c0573978>] (bus_for_each_dev+0x78/0xc0) [<c0573978>] (bus_for_each_dev) from [<c0574b5c>] (bus_add_driver+0x188/0x1e0) [<c0574b5c>] (bus_add_driver) from [<c05768b0>] (driver_register+0x74/0x108) [<c05768b0>] (driver_register) from [<c061ab7c>] (i2c_register_driver+0x3c/0x88) [<c061ab7c>] (i2c_register_driver) from [<c0102df8>] (do_one_initcall+0x58/0x250) [<c0102df8>] (do_one_initcall) from [<c01a91bc>] (do_init_module+0x60/0x244) [<c01a91bc>] (do_init_module) from [<c01ab5a4>] (load_module+0x2180/0x2540) [<c01ab5a4>] (load_module) from [<c01abbd4>] (sys_finit_module+0xd0/0xe8) [<c01abbd4>] (sys_finit_module) from [<c01011e0>] (__sys_trace_return+0x0/0x20) Fixes: 3fd6e7d9 (ASoC: tas571x: New driver for TI TAS571x power amplifiers) Signed-off-by:
Philipp Puschmann <p.puschmann@pironex.de> Link: https://lore.kernel.org/r/20200414112754.3365406-1-p.puschmann@pironex.deSigned-off-by:
-
Stephan Gerhold authored
commit 0c824ec0 upstream. For some reason, the MI2S DAIs do not have channels_min/max defined. This means that snd_soc_dai_stream_valid() returns false, i.e. the DAIs have neither valid playback nor capture stream. It's quite surprising that this ever worked correctly, but in 5.7-rc1 this is now failing badly: :) Commit 0e9cf4c4 ("ASoC: pcm: check if cpu-dai supports a given stream") introduced a check for snd_soc_dai_stream_valid() before calling hw_params(), which means that the q6i2s_hw_params() function was never called, eventually resulting in: qcom-q6afe aprsvc:q6afe:4:4: no line is assigned ... even though "qcom,sd-lines" is set in the device tree. Commit 9b5db059 ("ASoC: soc-pcm: dpcm: Only allow playback/capture if supported") now even avoids creating PCM devices if the stream is not supported, which means that it is failing even earlier with e.g.: Primary MI2S: ASoC: no backend playback stream Avoid all that trouble by adding channels_min/max for the MI2S DAIs. Fixes: 24c4cbcf ("ASoC: qdsp6: q6afe: Add q6afe dai driver") Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Reviewed-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200415150050.616392-1-stephan@gerhold.netSigned-off-by:
-
YueHaibing authored
commit 28535877 upstream. It should use ad7797_attribute_group in ad7797_info, according to commit ("iio:ad7793: Add support for the ad7796 and ad7797"). Scale is fixed for the ad7796 and not programmable, hence should not have the scale_available attribute. Fixes: fd1a8b91 ("iio:ad7793: Add support for the ad7796 and ad7797") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Nathan Chancellor authored
commit 09b04abb upstream. When building with Clang + -Wtautological-pointer-compare: drivers/usb/gadget/udc/bdc/bdc_ep.c:543:28: warning: comparison of address of 'req->queue' equal to a null pointer is always false [-Wtautological-pointer-compare] if (req == NULL || &req->queue == NULL || &req->usb_req == NULL) ~~~~~^~~~~ ~~~~ drivers/usb/gadget/udc/bdc/bdc_ep.c:543:51: warning: comparison of address of 'req->usb_req' equal to a null pointer is always false [-Wtautological-pointer-compare] if (req == NULL || &req->queue == NULL || &req->usb_req == NULL) ~~~~~^~~~~~~ ~~~~ 2 warnings generated. As it notes, these statements will always evaluate to false so remove them. Fixes: efed421a ("usb: gadget: Add UDC driver for Broadcom USB3.0 device controller IP BDC") Link: https://github.com/ClangBuiltLinux/linux/issues/749Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Thinh Nguyen authored
commit d0550cd2 upstream. The controller always supports link recovery for device in SS and SSP. Remove the speed limit check. Also, when the device is in RESUME or RESET state, it means the controller received the resume/reset request. The driver must send the link recovery to acknowledge the request. They are valid states for the driver to send link recovery. Fixes: 72246da4 ("usb: Introduce DesignWare USB3 DRD Driver") Fixes: ee5cd41c ("usb: dwc3: Update speed checks for SuperSpeedPlus") Signed-off-by:
Thinh Nguyen <thinhn@synopsys.com> Signed-off-by:
-
Tyler Hicks authored
commit 60d48857 upstream. Restore the behavior of locking mmap_sem for reading in binder_alloc_free_page(), as was first done in commit 3013bf62 ("binder: reduce mmap_sem write-side lock"). That change was inadvertently reverted by commit 5cec2d2e ("binder: fix race between munmap() and direct reclaim"). In addition, change the name of the label for the error path to accurately reflect that we're taking the lock for reading. Backporting note: This fix is only needed when *both* of the commits mentioned above are applied. That's an unlikely situation since they both landed during the development of v5.1 but only one of them is targeted for stable. Fixes: 5cec2d2e ("binder: fix race between munmap() and direct reclaim") Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Acked-by:
Todd Kjos <tkjos@android.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Christian Borntraeger authored
commit 467d12f5 upstream. QEMU has a funny new build error message when I use the upstream kernel headers: CC block/file-posix.o In file included from /home/cborntra/REPOS/qemu/include/qemu/timer.h:4, from /home/cborntra/REPOS/qemu/include/qemu/timed-average.h:29, from /home/cborntra/REPOS/qemu/include/block/accounting.h:28, from /home/cborntra/REPOS/qemu/include/block/block_int.h:27, from /home/cborntra/REPOS/qemu/block/file-posix.c:30: /usr/include/linux/swab.h: In function `__swab': /home/cborntra/REPOS/qemu/include/qemu/bitops.h:20:34: error: "sizeof" is not defined, evaluates to 0 [-Werror=undef] 20 | #define BITS_PER_LONG (sizeof (unsigned long) * BITS_PER_BYTE) | ^~~~~~ /home/cborntra/REPOS/qemu/include/qemu/bitops.h:20:41: error: missing binary operator before token "(" 20 | #define BITS_PER_LONG (sizeof (unsigned long) * BITS_PER_BYTE) | ^ cc1: all warnings being treated as errors make: *** [/home/cborntra/REPOS/qemu/rules.mak:69: block/file-posix.o] Error 1 rm tests/qemu-iotests/socket_scm_helper.o This was triggered by commit d5767057 ("uapi: rename ext2_swab() to swab() and share globally in swab.h"). That patch is doing #include <asm/bitsperlong.h> but it uses BITS_PER_LONG. The kernel file asm/bitsperlong.h provide only __BITS_PER_LONG. Let us use the __ variant in swap.h Link: http://lkml.kernel.org/r/20200213142147.17604-1-borntraeger@de.ibm.com Fixes: d5767057 ("uapi: rename ext2_swab() to swab() and share globally in swab.h") Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Cc: Yury Norov <yury.norov@gmail.com> Cc: Allison Randal <allison@lohutok.net> Cc: Joe Perches <joe@perches.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: William Breathitt Gray <vilhelm.gray@gmail.com> Cc: Torsten Hilbrich <torsten.hilbrich@secunet.com> Signed-off-by:
-
Liu Jian authored
commit d9b8a67b upstream. In function do_write_buffer(), in the for loop, there is a case chip_ready() returns 1 while chip_good() returns 0, so it never break the loop. To fix this, chip_good() is enough and it should timeout if it stay bad for a while. Fixes: dfeae107("mtd: cfi_cmdset_0002: Change write buffer to check correct value") Signed-off-by:
Yi Huaijie <yihuaijie@huawei.com> Signed-off-by:
Liu Jian <liujian56@huawei.com> Reviewed-by:
Tokunori Ikegami <ikegami_to@yahoo.co.jp> Signed-off-by:
Richard Weinberger <richard@nod.at> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Clement Leger authored
commit 00a0eec5 upstream. Index of rvring is computed using pointer arithmetic. However, since rvring->rvdev->vring is the base of the vring array, computation of rvring idx should be reversed. It previously lead to writing at negative indices in the resource table. Signed-off-by:
Clement Leger <cleger@kalray.eu> Link: https://lore.kernel.org/r/20191004073736.8327-1-cleger@kalray.euSigned-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Doug Anderson <dianders@chromium.org> Signed-off-by:
-
- 29 Apr, 2020 1 commit
-
-
Greg Kroah-Hartman authored
-
