- 27 Jan, 2016 22 commits
-
-
Dan Carpenter authored
commit abdc9a3b upstream. The code expects the loop to end with "retries" set to zero but, because it is a post-op, it will end set to -1. I have fixed this by moving the decrement inside the loop. Fixes: 014aa2a3 ('USB: ipaq: minor ipaq_open() cleanup.') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Chunfeng Yun authored
commit 096b110a upstream. if a full speed hub connects to a high speed hub which supports MTT, the MTT field of its slot context will be set to 1 when xHCI driver setups an xHCI virtual device in xhci_setup_addressable_virt_dev(); once usb core fetch its hub descriptor, and need to update the xHC's internal data structures for the device, the HUB field of its slot context will be set to 1 too, meanwhile MTT is also set before, this will cause configure endpoint command fail, so in the case, we should clear MTT to 0 for full speed hub according to section 6.2.2 Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Vinod Koul authored
commit a1068045 upstream. The detection of direction for compress was only taking into account codec capabilities and not CPU ones. Fix this by checking the CPU side capabilities as well Tested-by: Ashish Panwar <ashish.panwar@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Nikesh Oswal authored
commit e73694d8 upstream. For a sample rate of 12kHz the bclk was taken from the 44.1kHz table as we test for a multiple of 8kHz. This patch fixes this issue by testing for multiples of 4kHz instead. Signed-off-by: Nikesh Oswal <Nikesh.Oswal@cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Sachin Pandhare authored
commit e9f96bc5 upstream. From datasheet: R17408 (4400h) HPF_C_1 R17409 (4401h) HPF_C_0 17048 -> 17408 (0x4400) 17049 -> 17409 (0x4401) Signed-off-by: Sachin Pandhare <sachinpandhare@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Takashi Iwai authored
commit c0bcdbdf upstream. When a TLV ioctl with numid zero is handled, the driver may spew a kernel warning with a stack trace at each call. The check was intended obviously only for a kernel driver, but not for a user interaction. Let's fix it. This was spotted by syzkaller fuzzer. Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Takashi Iwai authored
commit 2ba1fe7a upstream. hrtimer_cancel() waits for the completion from the callback, thus it must not be called inside the callback itself. This was already a problem in the past with ALSA hrtimer driver, and the early commit [fcfdebe7: ALSA: hrtimer - Fix lock-up] tried to address it. However, the previous fix is still insufficient: it may still cause a lockup when the ALSA timer instance reprograms itself in its callback. Then it invokes the start function even in snd_timer_interrupt() that is called in hrtimer callback itself, results in a CPU stall. This is no hypothetical problem but actually triggered by syzkaller fuzzer. This patch tries to fix the issue again. Now we call hrtimer_try_to_cancel() at both start and stop functions so that it won't fall into a deadlock, yet giving some chance to cancel the queue if the functions have been called outside the callback. The proper hrtimer_cancel() is called in anyway at closing, so this should be enough. Reported-and-tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Nicolas Boichat authored
commit 43c54b8c upstream. This reverts one hunk of commit ef44a1ec ("ALSA: sound/core: use memdup_user()"), which replaced a number of kmalloc followed by memcpy with memdup calls. In this case, we are copying from a struct snd_pcm_hw_params32 to a struct snd_pcm_hw_params, but the latter is 4 bytes longer than the 32-bit version, so we need to separate kmalloc and copy calls. This actually leads to an out-of-bounds memory access later on in sound/soc/soc-pcm.c:soc_pcm_hw_params() (detected using KASan). Fixes: ef44a1ec ('ALSA: sound/core: use memdup_user()') Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Nicolas Boichat authored
commit 9586495d upstream. This reverts one hunk of commit ef44a1ec ("ALSA: sound/core: use memdup_user()"), which replaced a number of kmalloc followed by memcpy with memdup calls. In this case, we are copying from a struct snd_seq_port_info32 to a struct snd_seq_port_info, but the latter is 4 bytes longer than the 32-bit version, so we need to separate kmalloc and copy calls. Fixes: ef44a1ec ('ALSA: sound/core: use memdup_user()') Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Takashi Iwai authored
commit ee8413b0 upstream. ALSA timer instance object has a couple of linked lists and they are unlinked unconditionally at snd_timer_stop(). Meanwhile snd_timer_interrupt() unlinks it, but it calls list_del() which leaves the element list itself unchanged. This ends up with unlinking twice, and it was caught by syzkaller fuzzer. The fix is to use list_del_init() variant properly there, too. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Takashi Iwai authored
commit af368027 upstream. ALSA timer ioctls have an open race and this may lead to a use-after-free of timer instance object. A simplistic fix is to make each ioctl exclusive. We have already tread_sem for controlling the tread, and extend this as a global mutex to be applied to each ioctl. The downside is, of course, the worse concurrency. But these ioctls aren't to be parallel accessible, in anyway, so it should be fine to serialize there. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Takashi Iwai authored
commit b5a663aa upstream. A slave timer instance might be still accessible in a racy way while operating the master instance as it lacks of locking. Since the master operation is mostly protected with timer->lock, we should cope with it while changing the slave instance, too. Also, some linked lists (active_list and ack_list) of slave instances aren't unlinked immediately at stopping or closing, and this may lead to unexpected accesses. This patch tries to address these issues. It adds spin lock of timer->lock (either from master or slave, which is equivalent) in a few places. For avoiding a deadlock, we ensure that the global slave_active_lock is always locked at first before each timer lock. Also, ack and active_list of slave instances are properly unlinked at snd_timer_stop() and snd_timer_close(). Last but not least, remove the superfluous call of _snd_timer_stop() at removing slave links. This is a noop, and calling it may confuse readers wrt locking. Further cleanup will follow in a later patch. Actually we've got reports of use-after-free by syzkaller fuzzer, and this hopefully fixes these issues. Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Takashi Iwai authored
commit 3567eb6a upstream. ALSA sequencer code has an open race between the timer setup ioctl and the close of the client. This was triggered by syzkaller fuzzer, and a use-after-free was caught there as a result. This patch papers over it by adding a proper queue->timer_mutex lock around the timer-related calls in the relevant code path. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Takashi Iwai authored
commit 030e2c78 upstream. snd_seq_ioctl_remove_events() calls snd_seq_fifo_clear() unconditionally even if there is no FIFO assigned, and this leads to an Oops due to NULL dereference. The fix is just to add a proper NULL check. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Mario Kleiner authored
commit 9f660a1c upstream. Without this patch, internal speaker and line-out work, but front headphone output jack stays silent on the Mac Pro 4,1. This code path also gets executed on the MacPro 5,1 due to identical codec SSID, but i don't know if it has any positive or adverse effects there or not. (v2) Implement feedback from Takashi Iwai: Reuse alc889_fixup_mbp_vref and just add a new nid 0x19 for the MacPro 4,1. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Xiong Zhang authored
commit 3e6db33a upstream. It takes three minutes to enter into hibernation on some OEM SKL machines and we see many codec spurious response after thaw() opertion. This is because HDA is still in D0 state after freeze() call and pci_pm_freeze/pci_pm_freeze_noirq() don't set D3 hot in pci_bus driver. It seems bios still access HDA when system enter into freeze state, HDA will receive codec response interrupt immediately after thaw() call. Because of this unexpected interrupt, HDA enter into a abnormal state and slow down the system enter into hibernation. In this patch, we put HDA into D3 hot state in azx_freeze_noirq() and put HDA into D0 state in azx_thaw_noirq(). V2: Only apply this fix to SKL+ Fix compile error when CONFIG_PM_SLEEP isn't defined [Yet another fix for CONFIG_PM_SLEEP ifdef and the additional comment by tiwai] Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
David Henningsson authored
commit 02f6ff90 upstream. On the internal mic of the Packard Bell DOTS, one channel has an inverted signal. Add a quirk to fix this up. BugLink: https://bugs.launchpad.net/bugs/1523232Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Takashi Iwai authored
commit a74a8216 upstream. rme96 driver needs to reset DAC depending on the sample rate, and this results in resetting to the max volume suddenly. It's because of the missing call of snd_rme96_apply_dac_volume(). However, calling this function right after the DAC reset still may not work, and we need some delay before this call. Since the DAC reset and the procedure after that are performed in the spinlock, we delay the DAC volume restore at the end after the spinlock. Reported-and-tested-by: Sylvain LABOISNE <maeda1@free.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Jiri Slaby authored
-
Ben Hutchings authored
commit 4ab42d78 upstream. Currently slhc_init() treats out-of-range values of rslots and tslots as equivalent to 0, except that if tslots is too large it will dereference a null pointer (CVE-2015-7799). Add a range-check at the top of the function and make it return an ERR_PTR() on error instead of NULL. Change the callers accordingly. Compile-tested only. Reported-by: 郭永刚 <guoyonggang@360.cn> References: http://article.gmane.org/gmane.comp.security.oss.general/17908Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Ben Hutchings authored
commit 0baa57d8 upstream. Compile-tested only. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Vineet Gupta authored
commit 30b9dbee upstream. Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
- 25 Jan, 2016 17 commits
-
-
Vineet Gupta authored
commit 9acdc911 upstream. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Takashi Iwai authored
commit c932b98c upstream. HP ProBook 6550b needs the same pin fixup applied to other HP B-series laptops with docks for making its headphone and dock headphone jacks working properly. We just need to add the codec SSID to the list. Bugzilla: https://bugzilla.kernel.org/attachment.cgi?id=191971Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Alexandra Yates authored
commit 5cf92c8b upstream. Adding Intel codename Lewisburg platform device IDs for audio. [rearranged the position by tiwai] Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Jan Stancek authored
commit 27f972d3 upstream. We encountered a panic on boot in ipmi_si on a dell per320 due to an uninitialized timer as follows. static int smi_start_processing(void *send_info, ipmi_smi_t intf) { /* Try to claim any interrupts. */ if (new_smi->irq_setup) new_smi->irq_setup(new_smi); --> IRQ arrives here and irq handler tries to modify uninitialized timer which triggers BUG_ON(!timer->function) in __mod_timer(). Call Trace: <IRQ> [<ffffffffa0532617>] start_new_msg+0x47/0x80 [ipmi_si] [<ffffffffa053269e>] start_check_enables+0x4e/0x60 [ipmi_si] [<ffffffffa0532bd8>] smi_event_handler+0x1e8/0x640 [ipmi_si] [<ffffffff810f5584>] ? __rcu_process_callbacks+0x54/0x350 [<ffffffffa053327c>] si_irq_handler+0x3c/0x60 [ipmi_si] [<ffffffff810efaf0>] handle_IRQ_event+0x60/0x170 [<ffffffff810f245e>] handle_edge_irq+0xde/0x180 [<ffffffff8100fc59>] handle_irq+0x49/0xa0 [<ffffffff8154643c>] do_IRQ+0x6c/0xf0 [<ffffffff8100ba53>] ret_from_intr+0x0/0x11 /* Set up the timer that drives the interface. */ setup_timer(&new_smi->si_timer, smi_timeout, (long)new_smi); The following patch fixes the problem. To: Openipmi-developer@lists.sourceforge.net To: Corey Minyard <minyard@acm.org> CC: linux-kernel@vger.kernel.org Signed-off-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: Tony Camuso <tcamuso@redhat.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
H.J. Lu authored
commit 8c31902c upstream. When decompressing kernel image during x86 bootup, malloc memory for ELF program headers may run out of heap space, which leads to system halt. This patch doubles BOOT_HEAP_SIZE to 64KB. Tested with 32-bit kernel which failed to boot without this patch. Signed-off-by: H.J. Lu <hjl.tools@gmail.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Mario Kleiner authored
commit 2f0c0b2d upstream. Without the reboot=pci method, the iMac 10,1 simply hangs after printing "Restarting system" at the point when it should reboot. This fixes it. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1450466646-26663-1-git-send-email-mario.kleiner.de@gmail.comSigned-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Paul Mackerras authored
commit c20875a3 upstream. Currently it is possible for userspace (e.g. QEMU) to set a value for the MSR for a guest VCPU which has both of the TS bits set, which is an illegal combination. The result of this is that when we execute a hrfid (hypervisor return from interrupt doubleword) instruction to enter the guest, the CPU will take a TM Bad Thing type of program interrupt (vector 0x700). Now, if PR KVM is configured in the kernel along with HV KVM, we actually handle this without crashing the host or giving hypervisor privilege to the guest; instead what happens is that we deliver a program interrupt to the guest, with SRR0 reflecting the address of the hrfid instruction and SRR1 containing the MSR value at that point. If PR KVM is not configured in the kernel, then we try to run the host's program interrupt handler with the MMU set to the guest context, which almost certainly causes a host crash. This closes the hole by making kvmppc_set_msr_hv() check for the illegal combination and force the TS field to a safe value (00, meaning non-transactional). Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Ouyang Zhaowei (Charles) authored
commit 6a1f5137 upstream. On a cancelled suspend the vcpu_info location does not change (it's still in the per-cpu area registered by xen_vcpu_setup()). So do not call xen_hvm_init_shared_info() which would make the kernel think its back in the shared info. With the wrong vcpu_info, events cannot be received and the domain will hang after a cancelled suspend. Signed-off-by: Charles Ouyang <ouyangzhaowei@huawei.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Boris Ostrovsky authored
commit 9c17d965 upstream. Doing so will cause the grant to be unmapped and then, during fault handling, the fault to be mistakenly treated as NUMA hint fault. In addition, even if those maps could partcipate in NUMA balancing, it wouldn't provide any benefit since we are unable to determine physical page's node (even if/when VNUMA is implemented). Marking grant maps' VMAs as VM_IO will exclude them from being part of NUMA balancing. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Dmitry V. Levin authored
commit 22eab110 upstream. When restarting a syscall with regs->ax == -ERESTART_RESTARTBLOCK, regs->ax is assigned to a restart_syscall number. For x32 tasks, this syscall number must have __X32_SYSCALL_BIT set, otherwise it will be an x86_64 syscall number instead of a valid x32 syscall number. This issue has been there since the introduction of x32. Reported-by: strace/tests/restart_syscall.test Reported-and-tested-by: Elvira Khabirova <lineprinter0@gmail.com> Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Cc: Elvira Khabirova <lineprinter0@gmail.com> Link: http://lkml.kernel.org/r/20151130215436.GA25996@altlinux.orgSigned-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Eric Dumazet authored
commit 197c949e upstream. Backport of this upstream commit into stable kernels : 89c22d8c ("net: Fix skb csum races when peeking") exposed a bug in udp stack vs MSG_PEEK support, when user provides a buffer smaller than skb payload. In this case, skb_copy_and_csum_datagram_iovec(skb, sizeof(struct udphdr), msg->msg_iov); returns -EFAULT. This bug does not happen in upstream kernels since Al Viro did a great job to replace this into : skb_copy_and_csum_datagram_msg(skb, sizeof(struct udphdr), msg); This variant is safe vs short buffers. For the time being, instead reverting Herbert Xu patch and add back skb->ip_summed invalid changes, simply store the result of udp_lib_checksum_complete() so that we avoid computing the checksum a second time, and avoid the problematic skb_copy_and_csum_datagram_iovec() call. This patch can be applied on recent kernels as it avoids a double checksumming, then backported to stable kernels as a bug fix. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Yevgeny Pats authored
commit 23567fd0 upstream. This fixes CVE-2016-0728. If a thread is asked to join as a session keyring the keyring that's already set as its session, we leak a keyring reference. This can be tested with the following program: #include <stddef.h> #include <stdio.h> #include <sys/types.h> #include <keyutils.h> int main(int argc, const char *argv[]) { int i = 0; key_serial_t serial; serial = keyctl(KEYCTL_JOIN_SESSION_KEYRING, "leaked-keyring"); if (serial < 0) { perror("keyctl"); return -1; } if (keyctl(KEYCTL_SETPERM, serial, KEY_POS_ALL | KEY_USR_ALL) < 0) { perror("keyctl"); return -1; } for (i = 0; i < 100; i++) { serial = keyctl(KEYCTL_JOIN_SESSION_KEYRING, "leaked-keyring"); if (serial < 0) { perror("keyctl"); return -1; } } return 0; } If, after the program has run, there something like the following line in /proc/keys: 3f3d898f I--Q--- 100 perm 3f3f0000 0 0 keyring leaked-keyring: empty with a usage count of 100 * the number of times the program has been run, then the kernel is malfunctioning. If leaked-keyring has zero usages or has been garbage collected, then the problem is fixed. Reported-by: Yevgeny Pats <yevgeny@perception-point.io> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Don Zickus <dzickus@redhat.com> Acked-by: Prarit Bhargava <prarit@redhat.com> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
David Howells authored
commit b4a1b4f5 upstream. This fixes CVE-2015-7550. There's a race between keyctl_read() and keyctl_revoke(). If the revoke happens between keyctl_read() checking the validity of a key and the key's semaphore being taken, then the key type read method will see a revoked key. This causes a problem for the user-defined key type because it assumes in its read method that there will always be a payload in a non-revoked key and doesn't check for a NULL pointer. Fix this by making keyctl_read() check the validity of a key after taking semaphore instead of before. I think the bug was introduced with the original keyrings code. This was discovered by a multithreaded test program generated by syzkaller (http://github.com/google/syzkaller). Here's a cleaned up version: #include <sys/types.h> #include <keyutils.h> #include <pthread.h> void *thr0(void *arg) { key_serial_t key = (unsigned long)arg; keyctl_revoke(key); return 0; } void *thr1(void *arg) { key_serial_t key = (unsigned long)arg; char buffer[16]; keyctl_read(key, buffer, 16); return 0; } int main() { key_serial_t key = add_key("user", "%", "foo", 3, KEY_SPEC_USER_KEYRING); pthread_t th[5]; pthread_create(&th[0], 0, thr0, (void *)(unsigned long)key); pthread_create(&th[1], 0, thr1, (void *)(unsigned long)key); pthread_create(&th[2], 0, thr0, (void *)(unsigned long)key); pthread_create(&th[3], 0, thr1, (void *)(unsigned long)key); pthread_join(th[0], 0); pthread_join(th[1], 0); pthread_join(th[2], 0); pthread_join(th[3], 0); return 0; } Build as: cc -o keyctl-race keyctl-race.c -lkeyutils -lpthread Run as: while keyctl-race; do :; done as it may need several iterations to crash the kernel. The crash can be summarised as: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: [<ffffffff81279b08>] user_read+0x56/0xa3 ... Call Trace: [<ffffffff81276aa9>] keyctl_read_key+0xb6/0xd7 [<ffffffff81277815>] SyS_keyctl+0x83/0xe0 [<ffffffff815dbb97>] entry_SYSCALL_64_fastpath+0x12/0x6f Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Adrien Vergé authored
commit df36c5be upstream. Like other buggy models that had their fixes [1], the touchscreen with id 04f3:21b8 from ELAN Microelectronics needs the device-qualifier quirk. Otherwise, it fails to respond, blocks the boot for a random amount of time and pollutes dmesg with: [ 2887.373196] usb 1-5: new full-speed USB device number 41 using xhci_hcd [ 2889.502000] usb 1-5: unable to read config index 0 descriptor/start: -71 [ 2889.502005] usb 1-5: can't read configurations, error -71 [ 2889.654571] usb 1-5: new full-speed USB device number 42 using xhci_hcd [ 2891.783438] usb 1-5: unable to read config index 0 descriptor/start: -71 [ 2891.783443] usb 1-5: can't read configurations, error -71 [1]: See commits c68929f7, 876af5d4, d7499475, a32c99e7 and dc703ec2. Tested-by: Adrien Vergé <adrienverge@gmail.com> Signed-off-by: Adrien Vergé <adrienverge@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Oliver Neukum <ONeukum@suse.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Karl Heiss authored
commit 635682a1 upstream. A case can occur when sctp_accept() is called by the user during a heartbeat timeout event after the 4-way handshake. Since sctp_assoc_migrate() changes both assoc->base.sk and assoc->ep, the bh_sock_lock in sctp_generate_heartbeat_event() will be taken with the listening socket but released with the new association socket. The result is a deadlock on any future attempts to take the listening socket lock. Note that this race can occur with other SCTP timeouts that take the bh_lock_sock() in the event sctp_accept() is called. BUG: soft lockup - CPU#9 stuck for 67s! [swapper:0] ... RIP: 0010:[<ffffffff8152d48e>] [<ffffffff8152d48e>] _spin_lock+0x1e/0x30 RSP: 0018:ffff880028323b20 EFLAGS: 00000206 RAX: 0000000000000002 RBX: ffff880028323b20 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff880028323be0 RDI: ffff8804632c4b48 RBP: ffffffff8100bb93 R08: 0000000000000000 R09: 0000000000000000 R10: ffff880610662280 R11: 0000000000000100 R12: ffff880028323aa0 R13: ffff8804383c3880 R14: ffff880028323a90 R15: ffffffff81534225 FS: 0000000000000000(0000) GS:ffff880028320000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00000000006df528 CR3: 0000000001a85000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 0, threadinfo ffff880616b70000, task ffff880616b6cab0) Stack: ffff880028323c40 ffffffffa01c2582 ffff880614cfb020 0000000000000000 <d> 0100000000000000 00000014383a6c44 ffff8804383c3880 ffff880614e93c00 <d> ffff880614e93c00 0000000000000000 ffff8804632c4b00 ffff8804383c38b8 Call Trace: <IRQ> [<ffffffffa01c2582>] ? sctp_rcv+0x492/0xa10 [sctp] [<ffffffff8148c559>] ? nf_iterate+0x69/0xb0 [<ffffffff814974a0>] ? ip_local_deliver_finish+0x0/0x2d0 [<ffffffff8148c716>] ? nf_hook_slow+0x76/0x120 [<ffffffff814974a0>] ? ip_local_deliver_finish+0x0/0x2d0 [<ffffffff8149757d>] ? ip_local_deliver_finish+0xdd/0x2d0 [<ffffffff81497808>] ? ip_local_deliver+0x98/0xa0 [<ffffffff81496ccd>] ? ip_rcv_finish+0x12d/0x440 [<ffffffff81497255>] ? ip_rcv+0x275/0x350 [<ffffffff8145cfeb>] ? __netif_receive_skb+0x4ab/0x750 ... With lockdep debugging: ===================================== [ BUG: bad unlock balance detected! ] ------------------------------------- CslRx/12087 is trying to release lock (slock-AF_INET) at: [<ffffffffa01bcae0>] sctp_generate_timeout_event+0x40/0xe0 [sctp] but there are no more locks to release! other info that might help us debug this: 2 locks held by CslRx/12087: #0: (&asoc->timers[i]){+.-...}, at: [<ffffffff8108ce1f>] run_timer_softirq+0x16f/0x3e0 #1: (slock-AF_INET){+.-...}, at: [<ffffffffa01bcac3>] sctp_generate_timeout_event+0x23/0xe0 [sctp] Ensure the socket taken is also the same one that is released by saving a copy of the socket before entering the timeout event critical section. Signed-off-by: Karl Heiss <kheiss@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Finn Thain authored
commit 56931d73 upstream. For SCC initialization we cannot assume that the control register is in the correct state to accept a register pointer. So first read from the control register in order to "sync" up. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Oliver Neukum <ONeukum@suse.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Geert Uytterhoeven authored
commit 4e25c0e9 upstream. When DEBUG is enabled, do_page_fault() may dereference a NULL pointer, causing recursive bus errors. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Oliver Neukum <ONeukum@suse.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
- 19 Jan, 2016 1 commit
-
-
Kirill A. Shutemov authored
commit fecf3743 upstream. Add missing check for memory allocation fail. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oliver Neukum <ONeukum@suse.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-