Discards don't have any payload.
But the scsi layer still expects a bio_vec it can use internally,
see sd_setup_discard_cmnd() and blk_add_request_payload().
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Currently it calls __blk_mq_run_hw_queue(), which depends on the
CPU placement being correct. This means it's not possible to call
blk_mq_start_hw_queues(q) from a context that is correct for all
queues, leading to triggering the

WARN_ON(!cpumask_test_cpu(raw_smp_processor_id(), hctx->cpumask));

in __blk_mq_run_hw_queue().
Reported-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Another restriction inherited for NVMe - those devices don't support
SG lists that have "gaps" in them. Gaps refers to cases where the
previous SG entry doesn't end on a page boundary. For NVMe, all SG
entries must start at offset 0 (except the first) and end on a page
boundary (except the last).
Signed-off-by: Jens Axboe <axboe@fb.com>

Macro bip_vec_idx() was used by bio integrity originally, but no longer
used now. So remove it.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

This reverts commit b5097e95.

The original commit is buggy, we do use the registration functions
at runtime, for instance when loading IO schedulers through sysfs.
Reported-by: Damien Wyart <damien.wyart@gmail.com>

This reverts commit a2d445d4.

The original commit is buggy, we do use the registration functions
at runtime for modular builds.

Hello,

So, this patch should do.  Joe, Vivek, can one of you guys please
verify that the oops goes away with this patch?

Jens, the original thread can be read at

  http://thread.gmane.org/gmane.linux.kernel/1720729

The fix converts blkg->refcnt from int to atomic_t.  It does some
overhead but it should be minute compared to everything else which is
going on and the involved cacheline bouncing, so I think it's highly
unlikely to cause any noticeable difference.  Also, the refcnt in
question should be converted to a perpcu_ref for blk-mq anyway, so the
atomic_t is likely to go away pretty soon anyway.

Thanks.

------- 8< -------
__blkg_release_rcu() may be invoked after the associated request_queue
is released with a RCU grace period inbetween.  As such, the function
and callbacks invoked from it must not dereference the associated
request_queue.  This is clearly indicated in the comment above the
function.

Unfortunately, while trying to fix a different issue, 2a4fd070
("blkcg: move bulk of blkcg_gq release operations to the RCU
callback") ignored this and added [un]locking of @blkg->q->queue_lock
to __blkg_release_rcu().  This of course can cause oops as the
request_queue may be long gone by the time this code gets executed.

  general protection fault: 0000 [#1] SMP
  CPU: 21 PID: 30 Comm: rcuos/21 Not tainted 3.15.0 #1
  Hardware name: Stratus ftServer 6400/G7LAZ, BIOS BIOS Version 6.3:57 12/25/2013
  task: ffff880854021de0 ti: ffff88085403c000 task.ti: ffff88085403c000
  RIP: 0010:[<ffffffff8162e9e5>]  [<ffffffff8162e9e5>] _raw_spin_lock_irq+0x15/0x60
  RSP: 0018:ffff88085403fdf0  EFLAGS: 00010086
  RAX: 0000000000020000 RBX: 0000000000000010 RCX: 0000000000000000
  RDX: 000060ef80008248 RSI: 0000000000000286 RDI: 6b6b6b6b6b6b6b6b
  RBP: ffff88085403fdf0 R08: 0000000000000286 R09: 0000000000009f39
  R10: 0000000000020001 R11: 0000000000020001 R12: ffff88103c17a130
  R13: ffff88103c17a080 R14: 0000000000000000 R15: 0000000000000000
  FS:  0000000000000000(0000) GS:ffff88107fca0000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00000000006e5ab8 CR3: 000000000193d000 CR4: 00000000000407e0
  Stack:
   ffff88085403fe18 ffffffff812cbfc2 ffff88103c17a130 0000000000000000
   ffff88103c17a130 ffff88085403fec0 ffffffff810d1d28 ffff880854021de0
   ffff880854021de0 ffff88107fcaec58 ffff88085403fe80 ffff88107fcaec30
  Call Trace:
   [<ffffffff812cbfc2>] __blkg_release_rcu+0x72/0x150
   [<ffffffff810d1d28>] rcu_nocb_kthread+0x1e8/0x300
   [<ffffffff81091d81>] kthread+0xe1/0x100
   [<ffffffff8163813c>] ret_from_fork+0x7c/0xb0
  Code: ff 47 04 48 8b 7d 08 be 00 02 00 00 e8 55 48 a4 ff 5d c3 0f 1f 00 66 66 66 66 90 55 48 89 e5
  +fa 66 66 90 66 66 90 b8 00 00 02 00 <f0> 0f c1 07 89 c2 c1 ea 10 66 39 c2 75 02 5d c3 83 e2 fe 0f
  +b7
  RIP  [<ffffffff8162e9e5>] _raw_spin_lock_irq+0x15/0x60
   RSP <ffff88085403fdf0>

The request_queue locking was added because blkcg_gq->refcnt is an int
protected with the queue lock and __blkg_release_rcu() needs to put
the parent.  Let's fix it by making blkcg_gq->refcnt an atomic_t and
dropping queue locking in the function.

Given the general heavy weight of the current request_queue and blkcg
operations, this is unlikely to cause any noticeable overhead.
Moreover, blkcg_gq->refcnt is likely to be converted to percpu_ref in
the near future, so whatever (most likely negligible) overhead it may
add is temporary.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Joe Lawrence <joe.lawrence@stratus.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Link: http://lkml.kernel.org/g/alpine.DEB.2.02.1406081816540.17948@jlaw-desktop.mno.stratus.com
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>

Merge branch 'for-jens' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/linux-block into for-linus

In case reading of block 0 fails, line without trailing newline
is printed causing dmesg to look horrible.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This update fixes few issues in bt_get() function:

- list_empty(&wait.task_list) check is not protected;

- was_empty check is always true which results in *every* thread
  entering the loop resets bt_wait_state::wait_cnt counter rather
  than every bt->wake_cnt'th thread;

- 'bt_wait_state::wait_cnt' counter update is redundant, since
  it also gets reset in bt_clear_tag() function;

Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <tom.leiming@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

This piece of code in bt_clear_tag() function is racy:

	bs = bt_wake_ptr(bt);
	if (bs && atomic_dec_and_test(&bs->wait_cnt)) {
		atomic_set(&bs->wait_cnt, bt->wake_cnt);
 		wake_up(&bs->wait);
	}

Since nothing prevents bt_wake_ptr() from returning the very
same 'bs' address on multiple CPUs, the following scenario is
possible:

    CPU1                                CPU2
    ----                                ----

0.  bs = bt_wake_ptr(bt);               bs = bt_wake_ptr(bt);
1.  atomic_dec_and_test(&bs->wait_cnt)
2.                                      atomic_dec_and_test(&bs->wait_cnt)
3.  atomic_set(&bs->wait_cnt, bt->wake_cnt);

If the decrement in [1] yields zero then for some amount of time
the decrement in [2] results in a negative/overflow value, which
is not expected. The follow-up assignment in [3] overwrites the
invalid value with the batch value (and likely prevents the issue
from being severe) which is still incorrect and should be a lesser.

Cc: Ming Lei <tom.leiming@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Fix racy updates of shared blk_mq_bitmap_tags::wake_index
and blk_mq_hw_ctx::wake_index fields.

Cc: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Commit 762380ad inadvertently changed a check for max_sectors
to max_hw_sectors. Revert that part, so we still compare against
max_sectors.
Signed-off-by: Jens Axboe <axboe@fb.com>

Only blk-mq completions have payload attached to the request, for
request_fn mode we have stored it in req->special. This fixes an
oops with queue_mode=1 and softirq completions.
Signed-off-by: Jens Axboe <axboe@fb.com>

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

If we need to drain a queue we need to run all queues, even if they
are marked stopped to make sure the driver has a chance to error out
on all queued requests.

This fixes surprise removal with scsi-mq.
Reported-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@fb.com>

blk-mq issues async requests through kblockd. To issue a work request on
a specific CPU, kblockd_schedule_delayed_work_on is used. However, the
specific CPU choice may not be honored, if the power_efficient option
for workqueues is set. blk-mq requires that we have strict per-cpu
scheduling, so it wont work properly if kblockd is marked
POWER_EFFICIENT and power_efficient is set.

Remove the kblockd WQ_POWER_EFFICIENT flag to prevent this behavior.
This essentially reverts part of commit 695588f9, which added
the WQ_POWER_EFFICIENT marker to kblockd.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>

'use_mq' is not the name of the module parameter, 'queue_mode' is.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

elv_abort_queue has no callers, and blk_abort_flushes is only called by
elv_abort_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

Pull part two of ARM SoC updates from Arnd Bergmann:
 "This is a small follow-up to the larger ARM SoC updates merged last
  week, almost entirely for the keystone platform.

  The main change here is to use the new dma-ranges parsing code that
  came in through Russell's ARM tree.  This allows the keystone platform
  to do cache-coherent DMA and to finally support all the available
  physical memory when LPAE is enabled.

  Aside from this, the keystone reset driver has been rewritten, and
  there is a small bug fix to allow building the orion5x platform again"

* tag 'soc2-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: keystone: Drop use of meminfo since its not available anymore
  ARM: orion5x: fix mvebu_mbus_dt_init call
  ARM: configs: keystone: enable reset driver support
  ARM: dts: keystone: update reset node to work with reset driver
  ARM: keystone: remove redundant reset stuff
  ARM: keystone: Update the dma offset for non-dt platform devices
  ARM: keystone: Switch over to coherent memory address space
  ARM: configs: keystone: add MTD_SPI_NOR (new dependency for M25P80)
  ARM: configs: keystone: drop CONFIG_COMMON_CLK_DEBUG

Pull reiserfs and ext3 changes from Jan Kara:
 "Big reiserfs cleanup from Jeff, an ext3 deadlock fix, and some small
  cleanups"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (34 commits)
  reiserfs: Fix compilation breakage with CONFIG_REISERFS_CHECK
  ext3: Fix deadlock in data=journal mode when fs is frozen
  reiserfs: call truncate_setsize under tailpack mutex
  fs/jbd/revoke.c: replace shift loop by ilog2
  reiserfs: remove obsolete __constant_cpu_to_le32
  reiserfs: balance_leaf refactor, split up balance_leaf_when_delete
  reiserfs: balance_leaf refactor, format balance_leaf_finish_node
  reiserfs: balance_leaf refactor, format balance_leaf_new_nodes_paste
  reiserfs: balance_leaf refactor, format balance_leaf_paste_right
  reiserfs: balance_leaf refactor, format balance_leaf_insert_right
  reiserfs: balance_leaf refactor, format balance_leaf_paste_left
  reiserfs: balance_leaf refactor, format balance_leaf_insert_left
  reiserfs: balance_leaf refactor, pull out balance_leaf{left, right, new_nodes, finish_node}
  reiserfs: balance_leaf refactor, pull out balance_leaf_finish_node_paste
  reiserfs: balance_leaf refactor pull out balance_leaf_finish_node_insert
  reiserfs: balance_leaf refactor, pull out balance_leaf_new_nodes_paste
  reiserfs: balance_leaf refactor, pull out balance_leaf_new_nodes_insert
  reiserfs: balance_leaf refactor, pull out balance_leaf_paste_right
  reiserfs: balance_leaf refactor, pull out balance_leaf_insert_right
  reiserfs: balance_leaf refactor, pull out balance_leaf_paste_left
  ...

Pull btrfs updates from Chris Mason:
 "The biggest change here is Josef's rework of the btrfs quota
  accounting, which improves the in-memory tracking of delayed extent
  operations.

  I had been working on Btrfs stack usage for a while, mostly because it
  had become impossible to do long stress runs with slab, lockdep and
  pagealloc debugging turned on without blowing the stack.  Even though
  you upgraded us to a nice king sized stack, I kept most of the
  patches.

  We also have some very hard to find corruption fixes, an awesome sysfs
  use after free, and the usual assortment of optimizations, cleanups
  and other fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (80 commits)
  Btrfs: convert smp_mb__{before,after}_clear_bit
  Btrfs: fix scrub_print_warning to handle skinny metadata extents
  Btrfs: make fsync work after cloning into a file
  Btrfs: use right type to get real comparison
  Btrfs: don't check nodes for extent items
  Btrfs: don't release invalid page in btrfs_page_exists_in_range()
  Btrfs: make sure we retry if page is a retriable exception
  Btrfs: make sure we retry if we couldn't get the page
  btrfs: replace EINVAL with EOPNOTSUPP for dev_replace raid56
  trivial: fs/btrfs/ioctl.c: fix typo s/substract/subtract/
  Btrfs: fix leaf corruption after __btrfs_drop_extents
  Btrfs: ensure btrfs_prev_leaf doesn't miss 1 item
  Btrfs: fix clone to deal with holes when NO_HOLES feature is enabled
  btrfs: free delayed node outside of root->inode_lock
  btrfs: replace EINVAL with ERANGE for resize when ULLONG_MAX
  Btrfs: fix transaction leak during fsync call
  btrfs: Avoid trucating page or punching hole in a already existed hole.
  Btrfs: update commit root on snapshot creation after orphan cleanup
  Btrfs: ioctl, don't re-lock extent range when not necessary
  Btrfs: avoid visiting all extent items when cloning a range
  ...

Pull xfs updates from Dave Chinner:
 "This update contains:
   - cleanup removing unused function args
   - rework of the filestreams allocator to use dentry cache parent
     lookups
   - new on-disk free inode btree and optimised inode allocator
   - various bug fixes
   - rework of internal attribute API
   - cleanup of superblock feature bit support to remove historic cruft
   - more fixes and minor cleanups
   - added a new directory/attribute geometry abstraction
   - yet more fixes and minor cleanups"

* tag 'xfs-for-linus-3.16-rc1' of git://oss.sgi.com/xfs/xfs: (86 commits)
  xfs: fix xfs_da_args sparse warning in xfs_readdir
  xfs: Fix rounding in xfs_alloc_fix_len()
  xfs: tone down writepage/releasepage WARN_ONs
  xfs: small cleanup in xfs_lowbit64()
  xfs: kill xfs_buf_geterror()
  xfs: xfs_readsb needs to check for magic numbers
  xfs: block allocation work needs to be kswapd aware
  xfs: remove redundant geometry information from xfs_da_state
  xfs: replace attr LBSIZE with xfs_da_geometry
  xfs: pass xfs_da_args to xfs_attr_leaf_newentsize
  xfs: use xfs_da_geometry for block size in attr code
  xfs: remove mp->m_dir_geo from directory logging
  xfs: reduce direct usage of mp->m_dir_geo
  xfs: move node entry counts to xfs_da_geometry
  xfs: convert dir/attr btree threshold to xfs_da_geometry
  xfs: convert m_dirblksize to xfs_da_geometry
  xfs: convert m_dirblkfsbs to xfs_da_geometry
  xfs: convert directory segment limits to xfs_da_geometry
  xfs: convert directory db conversion to xfs_da_geometry
  xfs: convert directory dablk conversion to xfs_da_geometry
  ...

Pull block layer fixes from Jens Axboe:
 "Final small batch of fixes to be included before -rc1.  Some general
  cleanups in here as well, but some of the blk-mq fixes we need for the
  NVMe conversion and/or scsi-mq.  The pull request contains:

   - Support for not merging across a specified "chunk size", if set by
     the driver.  Some NVMe devices perform poorly for IO that crosses
     such a chunk, so we need to support it generically as part of
     request merging avoid having to do complicated split logic.  From
     me.

   - Bump max tag depth to 10Ki tags.  Some scsi devices have a huge
     shared tag space.  Before we failed with EINVAL if a too large tag
     depth was specified, now we truncate it and pass back the actual
     value.  From me.

   - Various blk-mq rq init fixes from me and others.

   - A fix for enter on a dying queue for blk-mq from Keith.  This is
     needed to prevent oopsing on hot device removal.

   - Fixup for blk-mq timer addition from Ming Lei.

   - Small round of performance fixes for mtip32xx from Sam Bradshaw.

   - Minor stack leak fix from Rickard Strandqvist.

   - Two __init annotations from Fabian Frederick"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: add __init to blkcg_policy_register
  block: add __init to elv_register
  block: ensure that bio_add_page() always accepts a page for an empty bio
  blk-mq: add timer in blk_mq_start_request
  blk-mq: always initialize request->start_time
  block: blk-exec.c: Cleaning up local variable address returnd
  mtip32xx: minor performance enhancements
  blk-mq: ->timeout should be cleared in blk_mq_rq_ctx_init()
  blk-mq: don't allow queue entering for a dying queue
  blk-mq: bump max tag depth to 10K tags
  block: add blk_rq_set_block_pc()
  block: add notion of a chunk size for request merging

Pull MTD updates from Brian Norris:
 - refactor m25p80.c driver for use as a general SPI NOR framework for
   other drivers which may speak to SPI NOR flash without providing full
   SPI support (i.e., not part of drivers/spi/)
 - new Freescale QuadSPI driver (utilizing new SPI NOR framework)
 - updates for the STMicro "FSM" SPI NOR driver
 - fix sync/flush behavior on mtd_blkdevs
 - fixup subpage write support on a few NAND drivers
 - correct the MTD OOB test for odd-sized OOB areas
 - add BCH-16 support for OMAP NAND
 - fix warnings and trivial refactoring
 - utilize new ECC DT bindings in pxa3xx NAND driver
 - new LPDDR NVM driver
 - address a few assorted bugs caught by Coverity
 - add new imx6sx support for GPMI NAND
 - use a bounce buffer for NAND when non-DMA-able buffers are used

* tag 'for-linus-20140610' of git://git.infradead.org/linux-mtd: (77 commits)
  mtd: gpmi: add gpmi support for imx6sx
  mtd: maps: remove check for CONFIG_MTD_SUPERH_RESERVE
  mtd: bf5xx_nand: use the managed version of kzalloc
  mtd: pxa3xx_nand: make the driver work on big-endian systems
  mtd: nand: omap: fix omap_calculate_ecc_bch() for-loop error
  mtd: nand: r852: correct write_buf loop bounds
  mtd: nand_bbt: handle error case for nand_create_badblock_pattern()
  mtd: nand_bbt: remove unused variable
  mtd: maps: sc520cdp: fix warnings
  mtd: slram: fix unused variable warning
  mtd: pfow: remove unused variable
  mtd: lpddr: fix Kconfig dependency, for I/O accessors
  mtd: nand: pxa3xx: Add supported ECC strength and step size to the DT binding
  mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding
  mtd: nand: pxa3xx: Clean pxa_ecc_init() error handling
  mtd: nand: Warn the user if the selected ECC strength is too weak
  mtd: nand: omap: Documentation: How to select correct ECC scheme for your device ?
  mtd: nand: omap: add support for BCH16_ECC - NAND driver updates
  mtd: nand: omap: add support for BCH16_ECC - ELM driver updates
  mtd: nand: omap: add support for BCH16_ECC - GPMC driver updates
  ...

Pull md updates from Neil Brown:
 "Assorted md fixes for 3.16

  Mostly performance improvements with a few corner-case bug fixes"

* tag 'md/3.16' of git://neil.brown.name/md:
  raid5: speedup sync_request processing
  md/raid5: deadlock between retry_aligned_read with barrier io
  raid5: add an option to avoid copy data from bio to stripe cache
  md/bitmap: remove confusing code from filemap_get_page.
  raid5: avoid release list until last reference of the stripe
  md: md_clear_badblocks should return an error code on failure.
  md/raid56: Don't perform reads to support writes until stripe is ready.
  md: refuse to change shape of array if it is active but read-only

There was a bug in debug printout when CONFIG_REISERFS_CHECK was
enabled so one of the assertions in do_balan.c didn't compile. Fix it.

Fixes: 0080e9f9Signed-off-by: Jan Kara <jack@suse.cz>

Pull watchdog updates from Wim Van Sebroeck:
 "This contains:
   - addition of the Intel MID watchdog
   - removal of W83697HF and W83697UG drivers (code was merged into
     w83627hf_wdt driver)
   - addition of Armada 375/380 SoC support
   - conversion of imx2_wdt to regmap API and to watchdog core API
   - lots of other small improvements and fixes"

[ Wim was also tagged by gmail as a spammer, but not delayed by days
  unlike Ben ]

* git://www.linux-watchdog.org/linux-watchdog: (25 commits)
  x86: intel-mid: add watchdog platform code for Merrifield
  watchdog: add Intel MID watchdog driver support
  watchdog: sp805: Set watchdog_device->timeout from ->set_timeout()
  booke/watchdog: refine and clean up the codes
  watchdog: iop_wdt only builds for mach-iop13xx
  watchdog: Remove drivers for W83697HF and W83697UG
  watchdog: w83627hf_wdt: Add early_disable module parameter
  ARM: mvebu: Add A375/A380 watchdog binding documentation
  watchdog: orion: Add Armada 375/380 SoC support
  watchdog: orion: Introduce per-SoC enabled() function
  watchdog: orion: Introduce per-SoC stop() function
  watchdog: orion: Remove unneeded atomic access
  watchdog: orion: Introduce a SoC-specific RSTOUT mapping
  watchdog: orion: Move the register ioremap'ing to its own function
  watchdog: xilinx: Make of_device_id array const
  watchdog: imx2_wdt: convert to watchdog core api
  watchdog: imx2_wdt: convert to use regmap API.
  watchdog: imx2_wdt: Sort the header files alphabetically
  watchdog: ath79_wdt: switch to clk_prepare/clk_disable
  watchdog: ath79_wdt: avoid spurious restarts on AR934x
  ...

Pull powerpc updates from Ben Herrenschmidt:
 "Here is the bulk of the powerpc changes for this merge window.  It got
  a bit delayed in part because I wasn't paying attention, and in part
  because I discovered I had a core PCI change without a PCI maintainer
  ack in it.  Bjorn eventually agreed it was ok to merge it though we'll
  probably improve it later and I didn't want to rebase to add his ack.

  There is going to be a bit more next week, essentially fixes that I
  still want to sort through and test.

  The biggest item this time is the support to build the ppc64 LE kernel
  with our new v2 ABI.  We previously supported v2 userspace but the
  kernel itself was a tougher nut to crack.  This is now sorted mostly
  thanks to Anton and Rusty.

  We also have a fairly big series from Cedric that add support for
  64-bit LE zImage boot wrapper.  This was made harder by the fact that
  traditionally our zImage wrapper was always 32-bit, but our new LE
  toolchains don't really support 32-bit anymore (it's somewhat there
  but not really "supported") so we didn't want to rely on it.  This
  meant more churn that just endian fixes.

  This brings some more LE bits as well, such as the ability to run in
  LE mode without a hypervisor (ie. under OPAL firmware) by doing the
  right OPAL call to reinitialize the CPU to take HV interrupts in the
  right mode and the usual pile of endian fixes.

  There's another series from Gavin adding EEH improvements (one day we
  *will* have a release with less than 20 EEH patches, I promise!).

  Another highlight is the support for the "Split core" functionality on
  P8 by Michael.  This allows a P8 core to be split into "sub cores" of
  4 threads which allows the subcores to run different guests under KVM
  (the HW still doesn't support a partition per thread).

  And then the usual misc bits and fixes ..."

[ Further delayed by gmail deciding that BenH is a dirty spammer.
  Google knows.  ]

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (155 commits)
  powerpc/powernv: Add missing include to LPC code
  selftests/powerpc: Test the THP bug we fixed in the previous commit
  powerpc/mm: Check paca psize is up to date for huge mappings
  powerpc/powernv: Pass buffer size to OPAL validate flash call
  powerpc/pseries: hcall functions are exported to modules, need _GLOBAL_TOC()
  powerpc: Exported functions __clear_user and copy_page use r2 so need _GLOBAL_TOC()
  powerpc/powernv: Set memory_block_size_bytes to 256MB
  powerpc: Allow ppc_md platform hook to override memory_block_size_bytes
  powerpc/powernv: Fix endian issues in memory error handling code
  powerpc/eeh: Skip eeh sysfs when eeh is disabled
  powerpc: 64bit sendfile is capped at 2GB
  powerpc/powernv: Provide debugfs access to the LPC bus via OPAL
  powerpc/serial: Use saner flags when creating legacy ports
  powerpc: Add cpu family documentation
  powerpc/xmon: Fix up xmon format strings
  powerpc/powernv: Add calls to support little endian host
  powerpc: Document sysfs DSCR interface
  powerpc: Fix regression of per-CPU DSCR setting
  powerpc: Split __SYSFS_SPRSETUP macro
  arch: powerpc/fadump: Cleaning up inconsistent NULL checks
  ...

Pull x86 platform driver updates from Matthew Garrett:
 "Very little of excitement here - the most significant is a new driver
  for detecting device freefall on Dells, other than that it's pretty
  much entirely minor fixes for specific machines"

* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86:
  hp-wmi: Enable hotkeys on some systems
  thinkpad_acpi: Add mappings for F9 - F12 hotkeys on X240 / T440 / T540
  platform: x86: dell-smo8800: Dell Latitude freefall driver (ACPI SMO8800/SMO8810)
  ideapad_laptop: Introduce the use of the managed version of kzalloc
  platform/x86: Fix run-time dependencies of OLPC drivers
  platform: x86: asus-wmi.c: Cleaning up uninitialized variables
  ix86/mid/thermal: Introduce the use of the managed version of kzalloc
  platform x86 Kconfig: Refer to the laptop list in the Compal driver help
  Documentation: Add list of laptop models supported by the Compal driver
  ideapad-laptop: Blacklist rfkill control on the Lenovo Yoga 2 11
  asus-wmi: Set WAPF to 4 for Asus X550CA
  alienware-wmi: For WMAX HDMI method, introduce a way to query HDMI cable status
  alienware-wmi: Update WMAX brightness method limit to 15
  pvpanic: Set high notifier priority
  platform/x86: samsung-laptop: Add support for Samsung's NP7[34]0U3E models.
  toshiba_acpi: Add alternative keymap support for Satellite M840
  platform-drivers-x86: intel_pmic_gpio: Fix off-by-one valid offset range check

This is a third attempt to enable these buttons. The new variable being
commit 997daa1b (i.e. hp-wmi: detect
"2009 BIOS or later"). Older systems that do not have the 2009 BIOS query
method respond with a dummy value, in this case 4. Using that, we can
target a fairly narrow group of systems. i.e. old enough to not have
HPWMI_FEATURE_QUERY 0xd, but new enough to have HPWMI_BIOS_QUERY 0x9.
This group may be further limited if some systems respond with something
other than 4 to non-existant feature queries.
Signed-off-by: Kyle Evans <kvans32@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

The T440s user guide says that when Fn-lock is not active, the *40s' F9 - F12
keys should be mapped to: control-panel, search, show-all-windows and Computer.

These keys generate the sofar unused 28 - 31 hotkey scancodes.

For the first 2 this nicely matches the icons on the keys, for the latter 2
the icons are somewhat creative, which is why I ended up looking them up in
the user manual.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

This acpi driver provide supports for freefall sensors SMO8800/SMO8810 which
can be found on Dell Latitude laptops. Driver register /dev/freefall misc
device which has same interface as driver hp_accel freefall driver. So any
existing applications for HP freefall sensor /dev/freefall will work for with
this new driver for Dell Latitude laptops too.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Cc: Sonal Santan <sonal.santan@gmail.com>
Tested-By: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-By: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

This patch moves data allocated using kzalloc to managed data allocated
using devm_kzalloc and cleans now unnecessary kfrees in probe and remove
functions. The label sysfs_failed is removed as it is no longer
required.  Also, linux/device.h is added to make sure the devm_*()
routine declarations are unambiguously available.

The following Coccinelle semantic patch was used for making the change:

@platform@
identifier p, probefn, removefn;
@@
struct platform_driver p = {
  .probe = probefn,
  .remove = removefn,
};

@prb@
identifier platform.probefn, pdev;
expression e, e1, e2;
@@
probefn(struct platform_device *pdev, ...) {
  <+...
- e = kzalloc(e1, e2)
+ e = devm_kzalloc(&pdev->dev, e1, e2)
  ...
?-kfree(e);
  ...+>
}

@rem depends on prb@
identifier platform.removefn;
expression e;
@@
removefn(...) {
  <...
- kfree(e);
  ...>
}
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

Let the xo15-ebook driver depend on OLPC as all other OLPC drivers
already do. Add COMPILE_TEST as an alternative for both xo1-rfkill
and xo15-ebook, to increase the build testing coverage.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

There is a risk that the variable will be used without being initialized.

This was largely found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

This patch moves data allocated using kzalloc to managed data allocated
using devm_kzalloc and cleans now unnecessary kfrees in probe and remove
functions.

The following Coccinelle semantic patch was used for making the change:

@platform@
identifier p, probefn, removefn;
@@
struct platform_driver p = {
  .probe = probefn,
  .remove = removefn,
};

@prb@
identifier platform.probefn, pdev;
expression e, e1, e2;
@@
probefn(struct platform_device *pdev, ...) {
  <+...
- e = kzalloc(e1, e2)
+ e = devm_kzalloc(&pdev->dev, e1, e2)
  ...
?-kfree(e);
  ...+>
}

@rem depends on prb@
identifier platform.removefn;
expression e;
@@
removefn(...) {
  <...
- kfree(e);
  ...>
}
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

Signed-off-by: Ismael Luceno <ismael.luceno@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

Signed-off-by: Ismael Luceno <ismael.luceno@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>