- 17 Apr, 2019 40 commits
-
-
Anand Jain authored
commit 272e5326 upstream. The compression property resets to NULL, instead of the old value if we fail to set the new compression parameter. $ btrfs prop get /btrfs compression compression=lzo $ btrfs prop set /btrfs compression zli ERROR: failed to set compression for /btrfs: Invalid argument $ btrfs prop get /btrfs compression This is because the compression property ->validate() is successful for 'zli' as the strncmp() used the length passed from the userspace. Fix it by using the expected string length in strncmp(). Fixes: 63541927 ("Btrfs: add support for inode properties") Fixes: 5c1aab1d ("btrfs: Add zstd support") CC: stable@vger.kernel.org # 4.14+ Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Anand Jain authored
commit 50398fde upstream. We let pass zstd compression parameter even if it is not fully valid. For example: $ btrfs prop set /btrfs compression zst $ btrfs prop get /btrfs compression compression=zst zlib and lzo are fine. Fix it by checking the correct prefix length. Fixes: 5c1aab1d ("btrfs: Add zstd support") CC: stable@vger.kernel.org # 4.14+ Reviewed-by:
-
Filipe Manana authored
commit f35f06c3 upstream. Whan a filesystem is mounted with the nologreplay mount option, which requires it to be mounted in RO mode as well, we can not allow discard on free space inside block groups, because log trees refer to extents that are not pinned in a block group's free space cache (pinning the extents is precisely the first phase of replaying a log tree). So do not allow the fitrim ioctl to do anything when the filesystem is mounted with the nologreplay option, because later it can be mounted RW without that option, which causes log replay to happen and result in either a failure to replay the log trees (leading to a mount failure), a crash or some silent corruption. Reported-by:
Darrick J. Wong <darrick.wong@oracle.com> Fixes: 96da0919 ("btrfs: Introduce new mount option to disable tree log replay") CC: stable@vger.kernel.org # 4.9+ Reviewed-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
-
S.j. Wang authored
commit 0ff4e8c6 upstream. There is very low possibility ( < 0.1% ) that channel swap happened in beginning when multi output/input pin is enabled. The issue is that hardware can't send data to correct pin in the beginning with the normal enable flow. This is hardware issue, but there is no errata, the workaround flow is that: Each time playback/recording, firstly clear the xSMA/xSMB, then enable TE/RE, then enable xSMB and xSMA (xSMB must be enabled before xSMA). Which is to use the xSMA as the trigger start register, previously the xCR_TE or xCR_RE is the bit for starting. Fixes commit 43d24e76 ("ASoC: fsl_esai: Add ESAI CPU DAI driver") Cc: <stable@vger.kernel.org> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Guenter Roeck authored
commit 8f71370f upstream. If codec registration fails after the ASoC Intel SST driver has been probed, the kernel will Oops and crash at suspend/resume. general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 PID: 2811 Comm: cat Tainted: G W 4.19.30 #15 Hardware name: GOOGLE Clapper, BIOS Google_Clapper.5216.199.7 08/22/2014 RIP: 0010:snd_soc_suspend+0x5a/0xd21 Code: 03 80 3c 10 00 49 89 d7 74 0b 48 89 df e8 71 72 c4 fe 4c 89 fa 48 8b 03 48 89 45 d0 48 8d 98 a0 01 00 00 48 89 d8 48 c1 e8 03 <8a> 04 10 84 c0 0f 85 85 0c 00 00 80 3b 00 0f 84 6b 0c 00 00 48 8b RSP: 0018:ffff888035407750 EFLAGS: 00010202 RAX: 0000000000000034 RBX: 00000000000001a0 RCX: 0000000000000000 RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff88805c417098 RBP: ffff8880354077b0 R08: dffffc0000000000 R09: ffffed100b975718 R10: 0000000000000001 R11: ffffffff949ea4a3 R12: 1ffff1100b975746 R13: dffffc0000000000 R14: ffff88805cba4588 R15: dffffc0000000000 FS: 0000794a78e91b80(0000) GS:ffff888068d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007bd5283ccf58 CR3: 000000004b7aa000 CR4: 00000000001006e0 Call Trace: ? dpm_complete+0x67b/0x67b ? i915_gem_suspend+0x14d/0x1ad sst_soc_prepare+0x91/0x1dd ? sst_be_hw_params+0x7e/0x7e dpm_prepare+0x39a/0x88b dpm_suspend_start+0x13/0x9d suspend_devices_and_enter+0x18f/0xbd7 ? arch_suspend_enable_irqs+0x11/0x11 ? printk+0xd9/0x12d ? lock_release+0x95f/0x95f ? log_buf_vmcoreinfo_setup+0x131/0x131 ? rcu_read_lock_sched_held+0x140/0x22a ? __bpf_trace_rcu_utilization+0xa/0xa ? __pm_pr_dbg+0x186/0x190 ? pm_notifier_call_chain+0x39/0x39 ? suspend_test+0x9d/0x9d pm_suspend+0x2f4/0x728 ? trace_suspend_resume+0x3da/0x3da ? lock_release+0x95f/0x95f ? kernfs_fop_write+0x19f/0x32d state_store+0xd8/0x147 ? sysfs_kf_read+0x155/0x155 kernfs_fop_write+0x23e/0x32d __vfs_write+0x108/0x608 ? vfs_read+0x2e9/0x2e9 ? rcu_read_lock_sched_held+0x140/0x22a ? __bpf_trace_rcu_utilization+0xa/0xa ? debug_smp_processor_id+0x10/0x10 ? selinux_file_permission+0x1c5/0x3c8 ? rcu_sync_lockdep_assert+0x6a/0xad ? __sb_start_write+0x129/0x2ac vfs_write+0x1aa/0x434 ksys_write+0xfe/0x1be ? __ia32_sys_read+0x82/0x82 do_syscall_64+0xcd/0x120 entry_SYSCALL_64_after_hwframe+0x49/0xbe In the observed situation, the problem is seen because the codec driver failed to probe due to a hardware problem. max98090 i2c-193C9890:00: Failed to read device revision: -1 max98090 i2c-193C9890:00: ASoC: failed to probe component -1 cht-bsw-max98090 cht-bsw-max98090: ASoC: failed to instantiate card -1 cht-bsw-max98090 cht-bsw-max98090: snd_soc_register_card failed -1 cht-bsw-max98090: probe of cht-bsw-max98090 failed with error -1 The problem is similar to the problem solved with commit 2fc995a8 ("ASoC: intel: Fix crash at suspend/resume without card registration"), but codec registration fails at a later point. At that time, the pointer checked with the above mentioned commit is already set, but it is not cleared if the device is subsequently removed. Adding a remove function to clear the pointer fixes the problem. Cc: stable@vger.kernel.org Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Curtis Malainey <cujomalainey@chromium.org> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Greg Thelen authored
commit 0b3d6e6f upstream. Since commit a983b5eb ("mm: memcontrol: fix excessive complexity in memory.stat reporting") memcg dirty and writeback counters are managed as: 1) per-memcg per-cpu values in range of [-32..32] 2) per-memcg atomic counter When a per-cpu counter cannot fit in [-32..32] it's flushed to the atomic. Stat readers only check the atomic. Thus readers such as balance_dirty_pages() may see a nontrivial error margin: 32 pages per cpu. Assuming 100 cpus: 4k x86 page_size: 13 MiB error per memcg 64k ppc page_size: 200 MiB error per memcg Considering that dirty+writeback are used together for some decisions the errors double. This inaccuracy can lead to undeserved oom kills. One nasty case is when all per-cpu counters hold positive values offsetting an atomic negative value (i.e. per_cpu[*]=32, atomic=n_cpu*-32). balance_dirty_pages() only consults the atomic and does not consider throttling the next n_cpu*32 dirty pages. If the file_lru is in the 13..200 MiB range then there's absolutely no dirty throttling, which burdens vmscan with only dirty+writeback pages thus resorting to oom kill. It could be argued that tiny containers are not supported, but it's more subtle. It's the amount the space available for file lru that matters. If a container has memory.max-200MiB of non reclaimable memory, then it will also suffer such oom kills on a 100 cpu machine. The following test reliably ooms without this patch. This patch avoids oom kills. $ cat test mount -t cgroup2 none /dev/cgroup cd /dev/cgroup echo +io +memory > cgroup.subtree_control mkdir test cd test echo 10M > memory.max (echo $BASHPID > cgroup.procs && exec /memcg-writeback-stress /foo) (echo $BASHPID > cgroup.procs && exec dd if=/dev/zero of=/foo bs=2M count=100) $ cat memcg-writeback-stress.c /* * Dirty pages from all but one cpu. * Clean pages from the non dirtying cpu. * This is to stress per cpu counter imbalance. * On a 100 cpu machine: * - per memcg per cpu dirty count is 32 pages for each of 99 cpus * - per memcg atomic is -99*32 pages * - thus the complete dirty limit: sum of all counters 0 * - balance_dirty_pages() only sees atomic count -99*32 pages, which * it max()s to 0. * - So a workload can dirty -99*32 pages before balance_dirty_pages() * cares. */ #define _GNU_SOURCE #include <err.h> #include <fcntl.h> #include <sched.h> #include <stdlib.h> #include <stdio.h> #include <sys/stat.h> #include <sys/sysinfo.h> #include <sys/types.h> #include <unistd.h> static char *buf; static int bufSize; static void set_affinity(int cpu) { cpu_set_t affinity; CPU_ZERO(&affinity); CPU_SET(cpu, &affinity); if (sched_setaffinity(0, sizeof(affinity), &affinity)) err(1, "sched_setaffinity"); } static void dirty_on(int output_fd, int cpu) { int i, wrote; set_affinity(cpu); for (i = 0; i < 32; i++) { for (wrote = 0; wrote < bufSize; ) { int ret = write(output_fd, buf+wrote, bufSize-wrote); if (ret == -1) err(1, "write"); wrote += ret; } } } int main(int argc, char **argv) { int cpu, flush_cpu = 1, output_fd; const char *output; if (argc != 2) errx(1, "usage: output_file"); output = argv[1]; bufSize = getpagesize(); buf = malloc(getpagesize()); if (buf == NULL) errx(1, "malloc failed"); output_fd = open(output, O_CREAT|O_RDWR); if (output_fd == -1) err(1, "open(%s)", output); for (cpu = 0; cpu < get_nprocs(); cpu++) { if (cpu != flush_cpu) dirty_on(output_fd, cpu); } set_affinity(flush_cpu); if (fsync(output_fd)) err(1, "fsync(%s)", output); if (close(output_fd)) err(1, "close(%s)", output); free(buf); } Make balance_dirty_pages() and wb_over_bg_thresh() work harder to collect exact per memcg counters. This avoids the aforementioned oom kills. This does not affect the overhead of memory.stat, which still reads the single atomic counter. Why not use percpu_counter? memcg already handles cpus going offline, so no need for that overhead from percpu_counter. And the percpu_counter spinlocks are more heavyweight than is required. It probably also makes sense to use exact dirty and writeback counters in memcg oom reports. But that is saved for later. Link: http://lkml.kernel.org/r/20190329174609.164344-1-gthelen@google.comSigned-off-by:
Greg Thelen <gthelen@google.com> Reviewed-by:
Roman Gushchin <guro@fb.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> [4.16+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Arnd Bergmann authored
commit 6147e136 upstream. clang points out with hundreds of warnings that the bitrev macros have a problem with constant input: drivers/hwmon/sht15.c:187:11: error: variable '__x' is uninitialized when used within its own initialization [-Werror,-Wuninitialized] u8 crc = bitrev8(data->val_status & 0x0F); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/bitrev.h:102:21: note: expanded from macro 'bitrev8' __constant_bitrev8(__x) : \ ~~~~~~~~~~~~~~~~~~~^~~~ include/linux/bitrev.h:67:11: note: expanded from macro '__constant_bitrev8' u8 __x = x; \ ~~~ ^ Both the bitrev and the __constant_bitrev macros use an internal variable named __x, which goes horribly wrong when passing one to the other. The obvious fix is to rename one of the variables, so this adds an extra '_'. It seems we got away with this because - there are only a few drivers using bitrev macros - usually there are no constant arguments to those - when they are constant, they tend to be either 0 or (unsigned)-1 (drivers/isdn/i4l/isdnhdlc.o, drivers/iio/amplifiers/ad8366.c) and give the correct result by pure chance. In fact, the only driver that I could find that gets different results with this is drivers/net/wan/slic_ds26522.c, which in turn is a driver for fairly rare hardware (adding the maintainer to Cc for testing). Link: http://lkml.kernel.org/r/20190322140503.123580-1-arnd@arndb.de Fixes: 556d2f05 ("ARM: 8187/1: add CONFIG_HAVE_ARCH_BITREVERSE to support rbit instruction") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Cc: Zhao Qiang <qiang.zhao@nxp.com> Cc: Yalin Wang <yalin.wang@sonymobile.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
David Rientjes authored
commit ede885ec upstream. get_num_contig_pages() could potentially overflow int so make its type consistent with its usage. Reported-by:
Cfir Cohen <cfir@google.com> Cc: stable@vger.kernel.org Signed-off-by:
David Rientjes <rientjes@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Dave Airlie authored
commit 9b39b013 upstream. If we unplug a udl device, the usb callback with deinit the mode_config struct, however userspace will still have an open file descriptor and a framebuffer on that device. When userspace closes the fd, we'll oops because it'll try and look stuff up in the object idr which we've destroyed. This punts destroying the mode objects until release time instead. Cc: stable@vger.kernel.org Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190405031715.5959-2-airlied@gmail.comSigned-off-by:
-
Yan Zhao authored
commit dade58ed upstream. in workload creation routine, if any failure occurs, do not queue this workload for delivery. if this failure is fatal, enter into failsafe mode. Fixes: 6d763035 ("drm/i915/gvt: Move common vGPU workload creation into scheduler.c") Cc: stable@vger.kernel.org #4.19+ Cc: zhenyuw@linux.intel.com Signed-off-by:
Yan Zhao <yan.y.zhao@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
-
Andrei Vagin authored
commit 07d7e120 upstream. To calculate a remaining time, it's required to subtract the current time from the expiration time. In alarm_timer_remaining() the arguments of ktime_sub are swapped. Fixes: d653d845 ("alarmtimer: Implement remaining callback") Signed-off-by:
Andrei Vagin <avagin@gmail.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: John Stultz <john.stultz@linaro.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190408041542.26338-1-avagin@gmail.comSigned-off-by:
-
Sven Schnelle authored
commit f324fa58 upstream. When setting the instruction pointer on PA-RISC we also need to set the back of the instruction queue to the new offset, otherwise we will execute on instruction from the new location, and jumping back to the old location stored in iaoq_b. Signed-off-by:
Sven Schnelle <svens@stackframe.org> Signed-off-by:
Helge Deller <deller@gmx.de> Fixes: 75ebedf1 ("parisc: Add HAVE_REGS_AND_STACK_ACCESS_API feature") Cc: stable@vger.kernel.org # 4.19+ Signed-off-by:
-
Sven Schnelle authored
commit 45efd871 upstream. While working on kretprobes for PA-RISC I was wondering while the kprobes sanity test always fails on kretprobes. This is caused by returning gpr20 instead of gpr28. Signed-off-by:
-
Helge Deller authored
commit d006e95b upstream. While adding LASI support to QEMU, I noticed that the QEMU detection in the kernel happens much too late. For example, when a LASI chip is found by the kernel, it registers the LASI LED driver as well. But when we run on QEMU it makes sense to avoid spending unnecessary CPU cycles, so we need to access the running_on_QEMU flag earlier than before. This patch now makes the QEMU detection the fist task of the Linux kernel by moving it to where the kernel enters the C-coding. Fixes: 310d8278 ("parisc: qemu idle sleep support") Signed-off-by:
-
Peter Geis authored
commit 09f91381 upstream. Various rk3328 based boards experience occasional sdmmc0 write errors. This is due to the rk3328.dtsi tx drive levels being set to 4ma, vs 8ma per the rk3328 datasheet default settings. Fix this by setting the tx signal pins to 8ma. Inspiration from tonymac32's patch, https://github.com/ayufan-rock64/linux-kernel/commit/dc1212b347e0da17c5460bcc0a56b07d02bac3f8 Fixes issues on the rk3328-roc-cc and the rk3328-rock64 (as per the above commit message). Tested on the rk3328-roc-cc board. Fixes: 52e02d37 ("arm64: dts: rockchip: add core dtsi file for RK3328 SoCs") Cc: stable@vger.kernel.org Signed-off-by:
Peter Geis <pgwipeout@gmail.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Aneesh Kumar K.V authored
commit c6f3c5ee upstream. With some architectures like ppc64, set_pmd_at() cannot cope with a situation where there is already some (different) valid entry present. Use pmdp_set_access_flags() instead to modify the pfn which is built to deal with modifying existing PMD entries. This is similar to commit cae85cb8 ("mm/memory.c: fix modifying of page protection by insert_pfn()") We also do similar update w.r.t insert_pfn_pud eventhough ppc64 don't support pud pfn entries now. Without this patch we also see the below message in kernel log "BUG: non-zero pgtables_bytes on freeing mm:" Link: http://lkml.kernel.org/r/20190402115125.18803-1-aneesh.kumar@linux.ibm.comSigned-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reported-by:
Chandan Rajendra <chandan@linux.ibm.com> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Hui Wang authored
commit cae30527 upstream. Recently we set CONFIG_SND_HDA_POWER_SAVE_DEFAULT to 1 when configuring the kernel, then two machines were reported to have noise after installing the new kernel. Put them in the blacklist, the noise disappears. https://bugs.launchpad.net/bugs/1821663 Cc: <stable@vger.kernel.org> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Richard Sailer authored
commit 80690a27 upstream. This adds a SND_PCI_QUIRK(...) line for the Tuxedo XC 1509. The Tuxedo XC 1509 and the System76 oryp5 are the same barebone notebooks manufactured by Clevo. To name the fixups both use after the actual underlying hardware, this patch also changes System76_orpy5 to clevo_pb51ed in 2 enum symbols and one function name, matching the other pci_quirk entries which are also named after the device ODM. Fixes: 7f665b1c ("ALSA: hda/realtek - Headset microphone and internal speaker support for System76 oryp5") Signed-off-by:
Richard Sailer <rs@tuxedocomputers.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jian-Hong Pan authored
commit ea5c7eba upstream. The Acer TravelMate B114-21 laptop cannot detect and record sound from headset MIC. This patch adds the ALC233_FIXUP_ACER_HEADSET_MIC HDA verb quirk chained with ALC233_FIXUP_ASUS_MIC_NO_PRESENCE pin quirk to fix this issue. [ fixed the missing brace and reordered the entry -- tiwai ] Signed-off-by:
Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by:
Daniel Drake <drake@endlessm.com> Reviewed-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Zubin Mithra authored
commit 212ac181 upstream. When ioctl calls are made with non-null-terminated userspace strings, strlcpy causes an OOB-read from within strlen. Fix by changing to use strscpy instead. Signed-off-by:
Zubin Mithra <zsm@chromium.org> Reviewed-by:
Guenter Roeck <groeck@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Erik Schmauss authored
commit c5781ffb upstream. ACPICA commit b233720031a480abd438f2e9c643080929d144c3 ASL operation_regions declare a range of addresses that it uses. In a perfect world, the range of addresses should be used exclusively by the AML interpreter. The OS can use this information to decide which drivers to load so that the AML interpreter and device drivers use different regions of memory. During table load, the address information is added to a global address range list. Each node in this list contains an address range as well as a namespace node of the operation_region. This list is deleted at ACPI shutdown. Unfortunately, ASL operation_regions can be declared inside of control methods. Although this is not recommended, modern firmware contains such code. New module level code changes unintentionally removed the functionality of adding and removing nodes to the global address range list. A few months ago, support for adding addresses has been re- implemented. However, the removal of the address range list was missed and resulted in some systems to crash due to the address list containing bogus namespace nodes from operation_regions declared in control methods. In order to fix the crash, this change removes dynamic operation_regions after control method termination. Link: https://github.com/acpica/acpica/commit/b2337200 Link: https://bugzilla.kernel.org/show_bug.cgi?id=202475 Fixes: 4abb951b ("ACPICA: AML interpreter: add region addresses in global list during initialization") Reported-by:
Michael J Gruber <mjg@fedoraproject.org> Signed-off-by:
Erik Schmauss <erik.schmauss@intel.com> Signed-off-by:
Bob Moore <robert.moore@intel.com> Cc: 4.20+ <stable@vger.kernel.org> # 4.20+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Furquan Shaikh authored
commit c8b1917c upstream. Commit 18996f2d ("ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume") was added to stop clearing event status bits unconditionally in the system-wide suspend and resume paths. This was done because of an issue with a laptop lid appaering to be closed even when it was used to wake up the system from suspend (see https://bugzilla.kernel.org/show_bug.cgi?id=196249), which happened because event status bits were cleared unconditionally on system resume. Though this change fixed the issue in the resume path, it introduced regressions in a few suspend paths. First regression was reported and fixed in the S5 entry path by commit fa85015c ("ACPICA: Clear status of all events when entering S5"). Next regression was reported and fixed for all legacy sleep paths by commit f317c7dc ("ACPICA: Clear status of all events when entering sleep states"). However, there still is a suspend-to-idle regression, since suspend-to-idle does not follow the legacy sleep paths. In the suspend-to-idle case, wakeup is enabled as part of device suspend. If the status bits of wakeup GPEs are set when they are enabled, it causes a premature system wakeup to occur. To address that problem, partially revert commit 18996f2d to restore GPE status bits clearing before the GPE is enabled in acpi_ev_enable_gpe(). Fixes: 18996f2d ("ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume") Signed-off-by:
Furquan Shaikh <furquan@google.com> Cc: 4.17+ <stable@vger.kernel.org> # 4.17+ [ rjw: Subject & changelog ] Signed-off-by:
-
Axel Lin authored
commit a165dcc9 upstream. Select REGMAP_I2C to avoid below build error: ERROR: "__devm_regmap_init_i2c" [drivers/hwmon/w83773g.ko] undefined! Fixes: ee249f27 ("hwmon: Add W83773G driver") Cc: stable@vger.kernel.org Signed-off-by:
Axel Lin <axel.lin@ingics.com> Signed-off-by:
-
Greg Kroah-Hartman authored
commit 7c0cca7c upstream. By default, the kernel will automatically load the module of any line dicipline that is asked for. As this sometimes isn't the safest thing to do, provide a sysctl to disable this feature. By default, we set this to 'y' as that is the historical way that Linux has worked, and we do not want to break working systems. But in the future, perhaps this can default to 'n' to prevent this functionality. Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Greg Kroah-Hartman authored
commit c7084edc upstream. The n_r3964 line discipline driver was written in a different time, when SMP machines were rare, and users were trusted to do the right thing. Since then, the world has moved on but not this code, it has stayed rooted in the past with its lovely hand-crafted list structures and loads of "interesting" race conditions all over the place. After attempting to clean up most of the issues, I just gave up and am now marking the driver as BROKEN so that hopefully someone who has this hardware will show up out of the woodwork (I know you are out there!) and will help with debugging a raft of changes that I had laying around for the code, but was too afraid to commit as odds are they would break things. Many thanks to Jann and Linus for pointing out the initial problems in this codebase, as well as many reviews of my attempts to fix the issues. It was a case of whack-a-mole, and as you can see, the mole won. Reported-by:
Jann Horn <jannh@google.com> Signed-off-by:
-
Yueyi Li authored
[ Upstream commit c8a43c18 ] When KASLR is enabled (CONFIG_RANDOMIZE_BASE=y), the top 4K of kernel virtual address space may be mapped to physical addresses despite being reserved for ERR_PTR values. Fix the randomization of the linear region so that we avoid mapping the last page of the virtual address space. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
liyueyi <liyueyi@live.com> [will: rewrote commit message; merged in suggestion from Ard] Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Sasha Levin (Microsoft) <sashal@kernel.org>
-
Florian Westphal authored
commit 89259088 upstream syzbot was able to trigger the WARN in cttimeout_default_get() by passing UDPLITE as l4protocol. Alias UDPLITE to UDP, both use same timeout values. Furthermore, also fetch GRE timeouts. GRE is a bit more complicated, as it still can be a module and its netns_proto_gre struct layout isn't visible outside of the gre module. Can't move timeouts around, it appears conntrack sysctl unregister assumes net_generic() returns nf_proto_net, so we get crash. Expose layout of netns_proto_gre instead. A followup nf-next patch could make gre tracker be built-in as well if needed, its not that large. Last, make the WARN() mention the missing protocol value in case anything else is missing. Reported-by: syzbot+2fae8fa157dd92618cae@syzkaller.appspotmail.com Fixes: 8866df92 ("netfilter: nfnetlink_cttimeout: pass default timeout policy to obj_to_nlattr") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Pablo Neira Ayuso authored
commit 8866df92 upstream Otherwise, we hit a NULL pointer deference since handlers always assume default timeout policy is passed. netlink: 24 bytes leftover after parsing attributes in process `syz-executor2'. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 9575 Comm: syz-executor1 Not tainted 4.19.0+ #312 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:icmp_timeout_obj_to_nlattr+0x77/0x170 net/netfilter/nf_conntrack_proto_icmp.c:297 Fixes: c779e849 ("netfilter: conntrack: remove get_timeout() indirection") Reported-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Neil Armstrong authored
This reverts commit c8e4f840. This patch was not initially a fix and is dependent on other changes which are not fixes eithers. With this change, multiple Amlogic based boards fails to boot, as reported by kernelci. Cc: stable@vger.kernel.org # 4.19.34 Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Nick Desaulniers authored
[ Upstream commit 5f074f3e ] A recent optimization in Clang (r355672) lowers comparisons of the return value of memcmp against zero to comparisons of the return value of bcmp against zero. This helps some platforms that implement bcmp more efficiently than memcmp. glibc simply aliases bcmp to memcmp, but an optimized implementation is in the works. This results in linkage failures for all targets with Clang due to the undefined symbol. For now, just implement bcmp as a tailcail to memcmp to unbreak the build. This routine can be further optimized in the future. Other ideas discussed: * A weak alias was discussed, but breaks for architectures that define their own implementations of memcmp since aliases to declarations are not permitted (only definitions). Arch-specific memcmp implementations typically declare memcmp in C headers, but implement them in assembly. * -ffreestanding also is used sporadically throughout the kernel. * -fno-builtin-bcmp doesn't work when doing LTO. Link: https://bugs.llvm.org/show_bug.cgi?id=41035 Link: https://code.woboq.org/userspace/glibc/string/memcmp.c.html#bcmp Link: https://github.com/llvm/llvm-project/commit/8e16d73346f8091461319a7dfc4ddd18eedcff13 Link: https://github.com/ClangBuiltLinux/linux/issues/416 Link: http://lkml.kernel.org/r/20190313211335.165605-1-ndesaulniers@google.comSigned-off-by:
Nathan Chancellor <natechancellor@gmail.com> Reported-by:
Adhemerval Zanella <adhemerval.zanella@linaro.org> Suggested-by:
James Y Knight <jyknight@google.com> Suggested-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Suggested-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Nick Desaulniers authored
commit ac3e233d upstream. GNU linker's -z common-page-size's default value is based on the target architecture. arch/x86/entry/vdso/Makefile sets it to the architecture default, which is implicit and redundant. Drop it. Fixes: 2aae950b ("x86_64: Add vDSO for x86-64 with gettimeofday/clock_gettime/getcpu") Reported-by:
Dmitry Golovin <dima@golovin.in> Reported-by:
Bill Wendling <morbo@google.com> Suggested-by:
Rui Ueyama <ruiu@google.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Acked-by:
Andy Lutomirski <luto@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Fangrui Song <maskray@google.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20181206191231.192355-1-ndesaulniers@google.com Link: https://bugs.llvm.org/show_bug.cgi?id=38774 Link: https://github.com/ClangBuiltLinux/linux/issues/31Signed-off-by:
-
Nick Desaulniers authored
commit ad15006c upstream. This causes an issue when trying to build with `make LD=ld.lld` if ld.lld and the rest of your cross tools aren't in the same directory (ex. /usr/local/bin) (as is the case for Android's build system), as the GCC_TOOLCHAIN_DIR then gets set based on `which $(LD)` which will point where LLVM tools are, not GCC/binutils tools are located. Instead, select the GCC_TOOLCHAIN_DIR based on another tool provided by binutils for which LLVM does not provide a substitute for, such as elfedit. Fixes: 785f11aa ("kbuild: Add better clang cross build support") Link: https://github.com/ClangBuiltLinux/linux/issues/341Suggested-by:
-
Masahiro Yamada authored
[ Upstream commit 02826a6b ] Ard Biesheuvel reports bindeb-pkg with O= option is broken in the following way: ... LD [M] sound/soc/rockchip/snd-soc-rk3399-gru-sound.ko LD [M] sound/soc/rockchip/snd-soc-rockchip-pcm.ko LD [M] sound/soc/rockchip/snd-soc-rockchip-rt5645.ko LD [M] sound/soc/rockchip/snd-soc-rockchip-spdif.ko LD [M] sound/soc/sh/rcar/snd-soc-rcar.ko fakeroot -u debian/rules binary make KERNELRELEASE=4.19.0-12677-g19beffaf7a99-dirty ARCH=arm64 KBUILD_SRC= intdeb-pkg /bin/bash /home/ard/linux/scripts/package/builddeb Makefile:600: include/config/auto.conf: No such file or directory *** *** Configuration file ".config" not found! *** *** Please run some configurator (e.g. "make oldconfig" or *** "make menuconfig" or "make xconfig"). *** make[12]: *** [syncconfig] Error 1 make[11]: *** [syncconfig] Error 2 make[10]: *** [include/config/auto.conf] Error 2 make[9]: *** [__sub-make] Error 2 ... Prior to commit 80463f1b ("kbuild: add --include-dir flag only for out-of-tree build"), both srctree and objtree were added to --include-dir redundantly, and the wrong code '$MAKE image_name' was working by relying on that. Now, the potential issue that had previously been hidden just showed up. '$MAKE image_name' recurses to the generated $(objtree)/Makefile and ends up with running in srctree, which is incorrect. It should be invoked with '-f $srctree/Makefile' (or KBUILD_SRC=) to be executed in objtree. Fixes: 80463f1b ("kbuild: add --include-dir flag only for out-of-tree build") Reported-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
Huy Nguyen authored
[ Upstream commit e28408e9 ] Set xon = xoff - netdev's max_mtu. netdev's max_mtu will give enough time for the pause frame to arrive at the sender. Fixes: 0696d608 ("net/mlx5e: Receive buffer configuration") Signed-off-by:
Huy Nguyen <huyn@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Huy Nguyen authored
[ Upstream commit 5ec983e9 ] Set minimum speed in xoff threshold formula to 40Gbps Fixes: 0696d608 ("net/mlx5e: Receive buffer configuration") Signed-off-by:
-
Aditya Pakki authored
[ Upstream commit 8e949363 ] idr_find() can return a NULL value to 'flow' which is used without a check. The patch adds a check to avoid potential NULL pointer dereference. In case of mlx5_fpga_sbu_conn_sendmsg() failure, free buf allocated using kzalloc. Fixes: ab412e1d ("net/mlx5: Accel, add TLS rx offload routines") Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Reviewed-by:
Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by:
-
Heiner Kallweit authored
[ Upstream commit 288ac524 ] It was reported that re-introducing ASPM, in combination with RX interrupt coalescing, results in significantly increased packet latency, see [0]. Disabling ASPM or RX interrupt coalescing fixes the issue. Therefore change the driver's default to disable RX interrupt coalescing. Users still have the option to enable RX coalescing via ethtool. [0] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=925496 Fixes: a99790bf ("r8169: Reinstate ASPM Support") Reported-by:
Mike Crowe <mac@mcrowe.com> Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Alexander Lobakin authored
[ Upstream commit 9a5a90d1 ] __netif_receive_skb_list_ptype() leaves skb->next poisoned before passing it to pt_prev->func handler, what may produce (in certain cases, e.g. DSA setup) crashes like: [ 88.606777] CPU 0 Unable to handle kernel paging request at virtual address 0000000e, epc == 80687078, ra == 8052cc7c [ 88.618666] Oops[#1]: [ 88.621196] CPU: 0 PID: 0 Comm: swapper Not tainted 5.1.0-rc2-dlink-00206-g4192a172-dirty #1473 [ 88.630885] $ 0 : 00000000 10000400 00000002 864d7850 [ 88.636709] $ 4 : 87c0ddf0 864d7800 87c0ddf0 00000000 [ 88.642526] $ 8 : 00000000 49600000 00000001 00000001 [ 88.648342] $12 : 00000000 c288617b dadbee27 25d17c41 [ 88.654159] $16 : 87c0ddf0 85cff080 80790000 fffffffd [ 88.659975] $20 : 80797b20 ffffffff 00000001 864d7800 [ 88.665793] $24 : 00000000 8011e658 [ 88.671609] $28 : 80790000 87c0dbc0 87cabf00 8052cc7c [ 88.677427] Hi : 00000003 [ 88.680622] Lo : 7b5b4220 [ 88.683840] epc : 80687078 vlan_dev_hard_start_xmit+0x1c/0x1a0 [ 88.690532] ra : 8052cc7c dev_hard_start_xmit+0xac/0x188 [ 88.696734] Status: 10000404 IEp [ 88.700422] Cause : 50000008 (ExcCode 02) [ 88.704874] BadVA : 0000000e [ 88.708069] PrId : 0001a120 (MIPS interAptiv (multi)) [ 88.713005] Modules linked in: [ 88.716407] Process swapper (pid: 0, threadinfo=(ptrval), task=(ptrval), tls=00000000) [ 88.725219] Stack : 85f61c28 00000000 0000000e 80780000 87c0ddf0 85cff080 80790000 8052cc7c [ 88.734529] 87cabf00 00000000 00000001 85f5fb40 807b0000 864d7850 87cabf00 807d0000 [ 88.743839] 864d7800 8655f600 00000000 85cff080 87c1c000 0000006a 00000000 8052d96c [ 88.753149] 807a0000 8057adb8 87c0dcc8 87c0dc50 85cfff08 00000558 87cabf00 85f58c50 [ 88.762460] 00000002 85f58c00 864d7800 80543308 fffffff4 00000001 85f58c00 864d7800 [ 88.771770] ... [ 88.774483] Call Trace: [ 88.777199] [<80687078>] vlan_dev_hard_start_xmit+0x1c/0x1a0 [ 88.783504] [<8052cc7c>] dev_hard_start_xmit+0xac/0x188 [ 88.789326] [<8052d96c>] __dev_queue_xmit+0x6e8/0x7d4 [ 88.794955] [<805a8640>] ip_finish_output2+0x238/0x4d0 [ 88.800677] [<805ab6a0>] ip_output+0xc8/0x140 [ 88.805526] [<805a68f4>] ip_forward+0x364/0x560 [ 88.810567] [<805a4ff8>] ip_rcv+0x48/0xe4 [ 88.815030] [<80528d44>] __netif_receive_skb_one_core+0x44/0x58 [ 88.821635] [<8067f220>] dsa_switch_rcv+0x108/0x1ac [ 88.827067] [<80528f80>] __netif_receive_skb_list_core+0x228/0x26c [ 88.833951] [<8052ed84>] netif_receive_skb_list+0x1d4/0x394 [ 88.840160] [<80355a88>] lunar_rx_poll+0x38c/0x828 [ 88.845496] [<8052fa78>] net_rx_action+0x14c/0x3cc [ 88.850835] [<806ad300>] __do_softirq+0x178/0x338 [ 88.856077] [<8012a2d4>] irq_exit+0xbc/0x100 [ 88.860846] [<802f8b70>] plat_irq_dispatch+0xc0/0x144 [ 88.866477] [<80105974>] handle_int+0x14c/0x158 [ 88.871516] [<806acfb0>] r4k_wait+0x30/0x40 [ 88.876462] Code: afb10014 8c8200a0 00803025 <9443000c> 94a20468 00000000 10620042 00a08025 9605046a [ 88.887332] [ 88.888982] ---[ end trace eb863d007da11cf1 ]--- [ 88.894122] Kernel panic - not syncing: Fatal exception in interrupt [ 88.901202] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fix this by pulling skb off the sublist and zeroing skb->next pointer before calling ptype callback. Fixes: 88eb1944 ("net: core: propagate SKB lists through packet_type lookup") Reviewed-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
Alexander Lobakin <alobakin@dlink.ru> Signed-off-by:
-
Lorenzo Bianconi authored
[ Upstream commit 2a3cabae ] erspan_v6 tunnels run __iptunnel_pull_header on received skbs to remove erspan header. This can determine a possible use-after-free accessing pkt_md pointer in ip6erspan_rcv since the packet will be 'uncloned' running pskb_expand_head if it is a cloned gso skb (e.g if the packet has been sent though a veth device). Fix it resetting pkt_md pointer after __iptunnel_pull_header Fixes: 1d7e2ed2 ("net: erspan: refactor existing erspan code") Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
-
Lorenzo Bianconi authored
[ Upstream commit 492b67e2 ] erspan tunnels run __iptunnel_pull_header on received skbs to remove gre and erspan headers. This can determine a possible use-after-free accessing pkt_md pointer in erspan_rcv since the packet will be 'uncloned' running pskb_expand_head if it is a cloned gso skb (e.g if the packet has been sent though a veth device). Fix it resetting pkt_md pointer after __iptunnel_pull_header Fixes: 1d7e2ed2 ("net: erspan: refactor existing erspan code") Signed-off-by:
-
