- 24 Nov, 2016 1 commit
-
-
Xiaoguang Chen authored
For 64bit bar while reading the higher 32bit the value should be returned directly. In the current implementation the higher 32bit value was discarded and not written to the cfg space of vgpu which lead to an incorrect bar size. Signed-off-by:
Xiaoguang Chen <xiaoguang.chen@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com>
-
- 23 Nov, 2016 1 commit
-
-
Du, Changbin authored
Initiate param.primary to 1. We should be primary currently. Signed-off-by:
Du, Changbin <changbin.du@intel.com> Signed-off-by:
-
- 17 Nov, 2016 2 commits
-
-
Zhenyu Wang authored
Instead of partially depending on vfio pin/unpin pages interface if mdev is available, which would result in failure if vfio is not on. But replace with a wrapper which need to be fixed till mdev support got fully merged. Cc: Jike Song <jike.song@intel.com> Cc: Xiaoguang Chen <xiaoguang.chen@intel.com> Reviewed-by:
-
Jani Nikula authored
We no longer cater for pre-production revisions of Skylake. Fixes: d4362225 ("drm/i915/gvt: update misc ctl regs base on stepping info") Cc: Ping Gao <ping.a.gao@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: <intel-gfx@lists.freedesktop.org> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
- 16 Nov, 2016 1 commit
-
-
Pei Zhang authored
This patch will fix warning log print during command scan caused by empty workload (ring head equals tail). This patch avoid going into real scan process if workload is empty. It's guest's responsibility to make sure if an empty workload is proper to submit to HW. [v2] modify the patch description. It's a fix, not a w/a. Signed-off-by:
Pei Zhang <pei.zhang@intel.com> Signed-off-by:
-
- 14 Nov, 2016 7 commits
-
-
Xiaoguang Chen authored
Since there's no opregion in vgpu so clear the opregion bits in case guest access it. Signed-off-by:
-
Ping Gao authored
Add more MMIO regs with command access flag for whitelist as they are accessed by command. Signed-off-by:
Ping Gao <ping.a.gao@intel.com> Signed-off-by:
-
Zhenyu Wang authored
Static checker gave warning on: drivers/gpu/drm/i915/gvt/edid.c:506 intel_gvt_i2c_handle_aux_ch_write() warn: odd binop '0x0 & 0xff' We try to return ACK for I2C reply which is defined with 0. Remove bit shift which caused misleading bit op. Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: -
Du, Changbin authored
Gvt gdrst handler handle_device_reset() invoke function setup_vgpu_mmio() to reset mmio status. In this case, the virtual mmio memory has been allocated already. The new allocation just cause old mmio memory leakage. Signed-off-by:
-
Du, Changbin authored
We initiate vgpu->workload_q_head via for_each_engine macro which may skip unavailable engines. So we should follow this rule anywhere. The function intel_vgpu_reset_execlist is not aware of this. Kernel crash when touch a uninitiated vgpu->workload_q_head[x]. Let's fix it by using for_each_engine_masked and skip unavailable engine ID. Meanwhile rename ring_bitmap to general name engine_mask. v2: remove unnecessary engine activation check (zhenyu) Signed-off-by:
-
Ping Gao authored
Emulate right behavior for tlb_control, set to ZERO upon write. Signed-off-by:
Min He <min.he@intel.com> Signed-off-by:
-
Pei Zhang authored
It's a classical abba type deadlock when using 2 mutex objects, which are gvt.lock(a) and drm.struct_mutex(b). Deadlock happens in threads: 1. intel_gvt_create/destroy_vgpu: P(a)->P(b) 2. workload_thread: P(b)->P(a) Fix solution is align the lock acquire sequence in both threads. This patch choose to adjust the sequence in workload_thread function. This fixed lockup symptom for guest-reboot stress test. v2: adjust sequence in workload_thread based on zhenyu's suggestion. adjust sequence in create/destroy_vgpu function. v3: fix to still require struct_mutex for dispatch_workload() Signed-off-by:
-
- 10 Nov, 2016 11 commits
-
-
https://github.com/01org/gvt-linuxDaniel Vetter authored
Merge tag 'gvt-next-kvmgt-framework' of https://github.com/01org/gvt-linux into drm-intel-next-queued Zhenyu Wang writes: gvt-next-kvmgt-framework This adds initial KVMGT framework based on GVT-g MPT(Mediated Passthrough) interface. Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com>
-
Tvrtko Ursulin authored
At the moment we allocate enough sg table entries assuming we will not be able to do any coalescing. But since in practice we most often can, and more so very effectively, this ends up wasting a lot of memory. A simple and effective way of trimming the over-allocated entries is to copy the table over to a new one allocated to the exact size. Experiments on my freshly logged and idle desktop (KDE) showed that by doing this we can save approximately 1 MiB of RAM, or when running a typical benchmark like gl_manhattan I have even seen a 6 MiB saving. More complicated techniques such as only copying the last used page and freeing the rest are left to the reader. v2: * Update commit message. * Use temporary sg_table on stack. (Chris Wilson) v3: * Commit message update. * Comment added. * Replace memcpy with copy assignment. (Chris Wilson) Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1478704423-7447-1-git-send-email-tvrtko.ursulin@linux.intel.com
-
Jike Song authored
KVMGT is the MPT implementation based on VFIO/KVM. It provides a kvmgt_mpt ops to gvt for vGPU access mediation, e.g. to mediate and emulate the MMIO accesses, to inject interrupts to vGPU user, to intercept the GTT writing and replace it with DMA-able address, to write-protect guest PPGTT table for shadowing synchronization, etc. This patch provides the MPT implementation for GVT, not yet functional due to theabsence of mdev. It's built as kvmgt.ko, depends on vfio.ko, kvm.ko and mdev.ko, and being required by i915.ko. To not introduce hard dependency in i915.ko, we used indirect symbol reference. But that means users have to include kvmgt.ko into init ramdisk if their i915.ko is included. Signed-off-by:
Kevin Tian <kevin.tian@intel.com> Signed-off-by:
Jike Song <jike.song@intel.com> Signed-off-by:
-
Jike Song authored
There are currently 4 methods in intel_gvt_io_emulation_ops to emulate CFG/MMIO reading/writing for intel vGPU. A possibly better scope is: add 3 more methods for vgpu create/destroy/reset respectively, and rename the ops to 'intel_gvt_ops', then pass it to the MPT module (say the future kvmgt) to use: they are all methods for external usage. Signed-off-by:
-
Jike Song authored
Hypervisors are different, the MPT ops is a only superset of all possibly supported hypervisors. There might be other way out of the MPT to achieve same target. e.g. vfio-based kvmgt won't provide map_gfn_to_mfn method to establish guest EPT mapping for aperture, since it will be done in QEMU/KVM, MMIO is also trapped elsewhere, etc. Signed-off-by:
-
Jike Song authored
GVT host needs init/exit hooks to do some initialization/cleanup work, e.g.: vfio mdev host device register/unregister. Signed-off-by:
-
Jike Song authored
Current GVT contains some obsolete logic originally cooked to support the old, non-vfio kvmgt, which is actually workarounds. We don't support that anymore, so it's safe to remove it and make a better framework. Signed-off-by:
-
Zhenyu Wang authored
By providing predefined vGPU types, users can choose which type a vgpu to create and use, without specifying detailed parameters. Signed-off-by:
-
Xiaoguang Chen authored
kmap_atomic doesn't allow sleep until unmapped. However, it's necessary to allow sleep during reading/writing guest memory, so use kmap instead. Signed-off-by:
Bing Niu <bing.niu@intel.com> Signed-off-by:
-
Bing Niu authored
On guest writing a PPGTT entry, if it contains value and the old entry is valid, gvt will read it and find & free the corresponding old data for it. However, with the KVM write protection provided by page_track, the guest entry will be written with new value before gvt handling. To avoid that, we should use the shadow entry instead. Signed-off-by:
-
git://git.kernel.org/pub/scm/virt/kvm/kvmDaniel Vetter authored
Paulo Bonzini writes: The three KVM patches that KVMGT needs. Signed-off-by:
-
- 09 Nov, 2016 6 commits
-
-
Chris Wilson authored
When we need to reset the global seqno on wraparound, we have to wait until the current rbtrees are drained (or otherwise the next waiter will be out of sequence). The current mechanism to kick and spin until complete, may exit too early as it would break if the target thread was currently running. Instead, we must wake up the threads, but keep spinning until the trees have been deleted. In order to appease Tvrtko, busy spin rather than yield(). Signed-off-by:
-
Maarten Lankhorst authored
This gets rid of a warning that the connectors are used without locking when doing a nonblocking modeset. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-11-git-send-email-maarten.lankhorst@linux.intel.com
-
Maarten Lankhorst authored
All of this state should be updated as soon as possible. It shouldn't be done later because then future updates may not depend on it. Changes since v1: - Move the modeset update to before drm_atomic_state_get. (Ville) Signed-off-by:
-
Maarten Lankhorst authored
The only user was i915, which is now gone. Signed-off-by:
-
Maarten Lankhorst authored
drm_select_eld requires mode_config.mutex and connection_mutex because it looks at the connector list and at the legacy encoders. This is not required, because when we call audio_codec_enable we know which connector it was called for, so pass the state. This also removes having to look at crtc->config. Changes since v1: - Use intel_crtc->pipe instead of drm_crtc_index. (Ville) Signed-off-by:
-
Maarten Lankhorst authored
This is the last connector still looking at crtc->config. Fix this. Signed-off-by:
-
- 08 Nov, 2016 8 commits
-
-
Arnd Bergmann authored
The newly added assert_kernel_context_is_current introduces a warning when built with W=1: drivers/gpu/drm/i915/i915_gem.c: In function ‘assert_kernel_context_is_current’: drivers/gpu/drm/i915/i915_gem.c:4417:63: error: suggest braces around empty body in an ‘else’ statement [-Werror=empty-body] Changing the GEM_BUG_ON() macro from an empty definition to "do { } while (0)" makes the macro more robust to use and avoids the warning. Fixes: 3033acab ("drm/i915: Queue the idling context switch after all other timelines") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161108135834.2166677-1-arnd@arndb.de
-
https://github.com/01org/gvt-linuxDaniel Vetter authored
gvt-next-2016-11-07 - Fix regression from e95433c7 - Some MMIO handler fixes - Add better handling for guest reset control - stratch page table tree for shadow ppgtt Signed-off-by:
-
Ville Syrjälä authored
The code to determine the primary plane offset for gen2/3 looks different than the code for gen4+, but in fact it's doing the same thing. Let's make it uniform. Allows us to eliminate the 'obj' from the list of local variables as well. Signed-off-by:
-
Ville Syrjälä authored
intel_cursor_plane_create() and intel_sprite_plane_create() return an error pointer, so let's not mistakenly look for a NULL pointer. Cc: Chris Wilson <chris@chris-wilson.co.uk> Reported-by:
-
Ville Syrjälä authored
Use the passed in plane_state instead of plane->state in vlv_update_plane(). Currently the two are one and the same, but if we start queuing up multiple plane updates they might not be. Looks like this was rebase fail on my part. Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Fixes: 8d0deca8 ("drm/i915: Pass 90/270 vs. 0/180 rotation info for intel_gen4_compute_page_offset()") Signed-off-by:
-
Chris Wilson authored
We always flush the chipset prior to executing with the GPU, so we can skip the flush during ordinary domain management. This should help mitigate some of the potential performance regressions, but likely trivial, from doing the flush unconditionally before execbuf introduced in commit dcd79934 ("drm/i915: Unconditionally flush any chipset buffers before execbuf") Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Joonas Lahtinen authored
Get rid of sloppy inline functions now that we don't have more users: i915_gem_request_get_seqno i915_gem_request_get_engine v2: - request->engine is always non-NULL (Chris) Signed-off-by:
-
Daniel Vetter authored
Signed-off-by:
-
- 07 Nov, 2016 3 commits
-
-
Chris Wilson authored
On LLC, or even snooped, machines rendering via the GPU ends up in the CPU cache. This cacheline dirt also needs to be flushed to main memory when moving to an incoherent domain, such as the display's scanout engine. Mostly, this happens because either the object is marked as dirty from its first use or is avoided by setting the object into the display domain from the start. v2: Treat WT as not requiring a clflush prior to use on the display engine as well. Fixes: 0f71979a ("drm/i915: Performed deferred clflush inside set-cache-level") References: https://bugs.freedesktop.org/show_bug.cgi?id=95414Signed-off-by:
-
Imre Deak authored
During resume we will reset the SW/HW tracking for each ring head/tail pointers and so are not prepared to replay any pending requests (as opposed to GPU reset time). Add an assert for this both to the suspend and the resume code. v2: - Check for ELSP port idle already during suspend and check !gt.awake during resume. (Chris) v3: - Move the !gt.awake check to i915_gem_resume(). v4: - s/intel_lr_engines_idle/intel_execlists_idle/ (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Imre Deak authored
We assume that the GPU is idle once receiving the seqno via the last request's user interrupt. In execlist mode the corresponding context completed interrupt can be delayed though and until this latter interrupt arrives we consider the request to be pending on the ELSP submit port. This can cause a problem during system suspend where this last request will be seen by the resume code as still pending. Such pending requests are normally replayed after a GPU reset, but during resume we reset both SW and HW tracking of the ring head/tail pointers, so replaying the pending request with its stale tail pointer will leave the ring in an inconsistent state. A subsequent request submission can lead then to the GPU executing from uninitialized area in the ring behind the above stale tail pointer. Fix this by making sure any pending request on the ELSP port is completed before suspending. I used a polling wait since the completion time I measured was <1ms and since normally we only need to wait during system suspend. GPU idling during runtime suspend is scheduled with a delay (currently 50-100ms) after the retirement of the last request at which point the context completed interrupt must have arrived already. The chance of this bug was increased by commit 1c777c5d Author: Imre Deak <imre.deak@intel.com> Date: Wed Oct 12 17:46:37 2016 +0300 drm/i915/hsw: Fix GPU hang during resume from S3-devices state but it could happen even without the explicit GPU reset, since we disable interrupts afterwards during the suspend sequence. v2: - Do an unlocked poll-wait first. (Chris) v3-4: - s/intel_lr_engines_idle/intel_execlists_idle/ and move i915.enable_execlists check to the new helper. (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98470Signed-off-by:
-
