At the beginning of the function, from_passive_init is set false by
"adapter->from_passive_init = false;",
hence the if statement will never run.
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When H_SEND_CRQ command returns with H_CLOSED, it means the
server's CRQ is not ready yet. Instead of resetting immediately,
we wait for the server to launch passive init.
ibmvnic_init() and ibmvnic_reset_init() should also return the
error code from ibmvnic_send_crq_init() call.
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of comparing (adapter->init_done_rc == 1), let it
be (adapter->init_done_rc == PARTIALSUCCESS).
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
ipv4: nexthop: Various improvements

This patch set contains various improvements that I made to the nexthop
object code while studying it towards my upcoming changes.

While patches #4 and #6 fix bugs, they are not regressions (never
worked). They also do not occur to me as critical issues, which is why I
am targeting them at net-next.

Tested with fib_nexthops.sh:

Tests passed: 134
Tests failed:   0
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Test that an IPv6 route can not use a nexthop group with mixed IPv4 and
IPv6 nexthops, but can use it after replacing the IPv4 nexthops with
IPv6 nexthops.

Output without previous patch:

# ./fib_nexthops.sh -t ipv6_fcnal_runtime

IPv6 functional runtime
-----------------------
TEST: Route add                                                     [ OK ]
TEST: Route delete                                                  [ OK ]
TEST: Ping with nexthop                                             [ OK ]
TEST: Ping - multipath                                              [ OK ]
TEST: Ping - blackhole                                              [ OK ]
TEST: Ping - blackhole replaced with gateway                        [ OK ]
TEST: Ping - gateway replaced by blackhole                          [ OK ]
TEST: Ping - group with blackhole                                   [ OK ]
TEST: Ping - group blackhole replaced with gateways                 [ OK ]
TEST: IPv6 route with device only nexthop                           [ OK ]
TEST: IPv6 multipath route with nexthop mix - dev only + gw         [ OK ]
TEST: IPv6 route can not have a v4 gateway                          [ OK ]
TEST: Nexthop replace - v6 route, v4 nexthop                        [ OK ]
TEST: Nexthop replace of group entry - v6 route, v4 nexthop         [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route using a group after removing v4 gateways           [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route using a group after replacing v4 gateways          [FAIL]
TEST: Nexthop with default route and rpfilter                       [ OK ]
TEST: Nexthop with multipath default route and rpfilter             [ OK ]

Tests passed:  21
Tests failed:   1

Output with previous patch:

# ./fib_nexthops.sh -t ipv6_fcnal_runtime

IPv6 functional runtime
-----------------------
TEST: Route add                                                     [ OK ]
TEST: Route delete                                                  [ OK ]
TEST: Ping with nexthop                                             [ OK ]
TEST: Ping - multipath                                              [ OK ]
TEST: Ping - blackhole                                              [ OK ]
TEST: Ping - blackhole replaced with gateway                        [ OK ]
TEST: Ping - gateway replaced by blackhole                          [ OK ]
TEST: Ping - group with blackhole                                   [ OK ]
TEST: Ping - group blackhole replaced with gateways                 [ OK ]
TEST: IPv6 route with device only nexthop                           [ OK ]
TEST: IPv6 multipath route with nexthop mix - dev only + gw         [ OK ]
TEST: IPv6 route can not have a v4 gateway                          [ OK ]
TEST: Nexthop replace - v6 route, v4 nexthop                        [ OK ]
TEST: Nexthop replace of group entry - v6 route, v4 nexthop         [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route using a group after removing v4 gateways           [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route using a group after replacing v4 gateways          [ OK ]
TEST: Nexthop with default route and rpfilter                       [ OK ]
TEST: Nexthop with multipath default route and rpfilter             [ OK ]

Tests passed:  22
Tests failed:   0
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Each nexthop group contains an indication if it has IPv4 nexthops
('has_v4'). Its purpose is to prevent IPv6 routes from using groups with
IPv4 nexthops.

However, the indication is not updated when a nexthop is replaced. This
results in the kernel wrongly rejecting IPv6 routes from pointing to
groups that only contain IPv6 nexthops. Example:

# ip nexthop replace id 1 via 192.0.2.2 dev dummy10
# ip nexthop replace id 10 group 1
# ip nexthop replace id 1 via 2001:db8:1::2 dev dummy10
# ip route replace 2001:db8:10::/64 nhid 10
Error: IPv6 routes can not use an IPv4 nexthop.

Solve this by iterating over all the nexthop groups that the replaced
nexthop is a member of and potentially update their IPv4 indication
according to the new set of member nexthops.

Avoid wasting cycles by only performing the update in case an IPv4
nexthop is replaced by an IPv6 nexthop.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Test that an IPv6 route can not use a nexthop group with mixed IPv4 and
IPv6 nexthops, but can use it after deleting the IPv4 nexthops.

Output without previous patch:

# ./fib_nexthops.sh -t ipv6_fcnal_runtime

IPv6 functional runtime
-----------------------
TEST: Route add                                                     [ OK ]
TEST: Route delete                                                  [ OK ]
TEST: Ping with nexthop                                             [ OK ]
TEST: Ping - multipath                                              [ OK ]
TEST: Ping - blackhole                                              [ OK ]
TEST: Ping - blackhole replaced with gateway                        [ OK ]
TEST: Ping - gateway replaced by blackhole                          [ OK ]
TEST: Ping - group with blackhole                                   [ OK ]
TEST: Ping - group blackhole replaced with gateways                 [ OK ]
TEST: IPv6 route with device only nexthop                           [ OK ]
TEST: IPv6 multipath route with nexthop mix - dev only + gw         [ OK ]
TEST: IPv6 route can not have a v4 gateway                          [ OK ]
TEST: Nexthop replace - v6 route, v4 nexthop                        [ OK ]
TEST: Nexthop replace of group entry - v6 route, v4 nexthop         [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route using a group after deleting v4 gateways           [FAIL]
TEST: Nexthop with default route and rpfilter                       [ OK ]
TEST: Nexthop with multipath default route and rpfilter             [ OK ]

Tests passed:  18
Tests failed:   1

Output with previous patch:

bash-5.0# ./fib_nexthops.sh -t ipv6_fcnal_runtime

IPv6 functional runtime
-----------------------
TEST: Route add                                                     [ OK ]
TEST: Route delete                                                  [ OK ]
TEST: Ping with nexthop                                             [ OK ]
TEST: Ping - multipath                                              [ OK ]
TEST: Ping - blackhole                                              [ OK ]
TEST: Ping - blackhole replaced with gateway                        [ OK ]
TEST: Ping - gateway replaced by blackhole                          [ OK ]
TEST: Ping - group with blackhole                                   [ OK ]
TEST: Ping - group blackhole replaced with gateways                 [ OK ]
TEST: IPv6 route with device only nexthop                           [ OK ]
TEST: IPv6 multipath route with nexthop mix - dev only + gw         [ OK ]
TEST: IPv6 route can not have a v4 gateway                          [ OK ]
TEST: Nexthop replace - v6 route, v4 nexthop                        [ OK ]
TEST: Nexthop replace of group entry - v6 route, v4 nexthop         [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route using a group after deleting v4 gateways           [ OK ]
TEST: Nexthop with default route and rpfilter                       [ OK ]
TEST: Nexthop with multipath default route and rpfilter             [ OK ]

Tests passed:  19
Tests failed:   0
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Each nexthop group contains an indication if it has IPv4 nexthops
('has_v4'). Its purpose is to prevent IPv6 routes from using groups with
IPv4 nexthops.

However, the indication is not updated when a nexthop is removed. This
results in the kernel wrongly rejecting IPv6 routes from pointing to
groups that only contain IPv6 nexthops. Example:

# ip nexthop replace id 1 via 192.0.2.2 dev dummy10
# ip nexthop replace id 2 via 2001:db8:1::2 dev dummy10
# ip nexthop replace id 10 group 1/2
# ip nexthop del id 1
# ip route replace 2001:db8:10::/64 nhid 10
Error: IPv6 routes can not use an IPv4 nexthop.

Solve this by updating the indication according to the new set of
member nexthops.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The pointer is not RCU protected, so remove the unnecessary
rtnl_dereference(). This suppresses the following warning:

net/ipv4/nexthop.c:1101:24: error: incompatible types in comparison expression (different address spaces):
net/ipv4/nexthop.c:1101:24:    struct rb_node [noderef] __rcu *
net/ipv4/nexthop.c:1101:24:    struct rb_node *
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The code correctly uses nla_get_be32() to get the payload of the
attribute, but incorrectly uses nla_put_u32() to add the attribute to
the payload. This results in the following warning:

net/ipv4/nexthop.c:279:59: warning: incorrect type in argument 3 (different base types)
net/ipv4/nexthop.c:279:59:    expected unsigned int [usertype] value
net/ipv4/nexthop.c:279:59:    got restricted __be32 [usertype] ipv4

Suppress the warning by using nla_put_be32().
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The struct looks as follows:

struct nh_group {
	struct nh_group		*spare; /* spare group for removals */
	u16			num_nh;
	bool			mpath;
	bool			fdb_nh;
	bool			has_v4;
	struct nh_grp_entry	nh_entries[];
};

But its offset within 'struct nexthop' is also taken into account to
determine the allocation size.

Instead, use struct_size() to allocate only the required number of
bytes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tariq Toukan says:

====================
net_prefetch API

This patchset adds a common net API for L1 cacheline size-aware prefetch.

Patch 1 introduces the common API in net and aligns the drivers to use it.
Patches 2 and 3 add usage in mlx4 and mlx5 Eth drivers.

Series generated against net-next commit:
079f921e Merge tag 'batadv-next-for-davem-20200824' of git://git.open-mesh.org/linux-merge
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

A single cacheline might not contain the packet header for
small L1_CACHE_BYTES values.
Use net_prefetch() as it issues an additional prefetch
in this case.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A single cacheline might not contain the packet header for
small L1_CACHE_BYTES values.
Use net_prefetch() as it issues an additional prefetch
in this case.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Many device drivers use the same prefetch code structure to
deal with small L1 cacheline size.
Take this code into a function and call it from the drivers.
Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vineetha G. Jaya Kumaran says:

====================
Add Ethernet support for Intel Keem Bay SoC

This patch set enables support for Ethernet on the Intel Keem Bay SoC.
The first patch contains the required Device Tree bindings documentation,
while the second patch adds the Intel platform glue layer for the stmmac
device driver.

This driver was tested on the Keem Bay evaluation module board.
Changes since v2:
-Add a select in DT documentation to avoid matching with all nodes containing 'snps,dwmac'
-Rebased to 5.9-rc1

Changes since v1:
-Removed clocks maxItems property from DT bindings documentation
-Removed phy compatible strings from DT bindings documentation
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add dwmac-intel-plat to enable the stmmac driver in Intel Keem Bay.
Also add fix_mac_speed and tx_clk in order to change link speeds.
This is required as mac_speed_o is not connected in the
Intel Keem Bay SoC.
Signed-off-by: Rusaimi Amira Ruslan <rusaimi.amira.rusaimi@intel.com>
Signed-off-by: Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add Device Tree bindings documentation for the ethernet controller
on Intel Keem Bay.
Signed-off-by: Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is no longer used, SCTP now uses a private helper.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Because kfree_skb already checked NULL skb parameter,
so the additional check is unnecessary, just remove it.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use semicolons and braces.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use semicolons and braces.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use semicolons and braces.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use semicolons and braces.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use semicolons and braces.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is a pure codestyle cleanup patch. Also add a blank line after
declarations as warned by checkpatch.pl.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Check midx against 0 is always equal to check midx against sk_bound_dev_if
when sk_bound_dev_if is known not equal to 0 in these case.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We can avoid unnecessary inet_addr_type() call by check addr against
INADDR_ANY first.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We can defer set ping saddr until we successfully get the ping port. So we
can avoid clear saddr when failed. Since ping_clear_saddr() is not used
anymore now, remove it.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cxgb4 does not look for HASHTBLMEMCRCERR and CMDTIDERR
bits in LE_DB_INT_CAUSE register, but these are enabled
in LE_DB_INT_ENABLE. So, add error handlers to LE
interrupt handler to emit a warning or alert message
for hash table mem crc and cmd tid errors
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The need for padding 64bit is implicitly checked by nla_align_64bit(), so
remove this explicit one.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When mtu is locked, we should not obtain ipv4 mtu as we return immediately
in this case and leave acquired ipv4 mtu unused.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simon Wunderlich says:

====================
This cleanup patchset includes the following patches:

 - bump version strings, by Simon Wunderlich

 - Drop unused function batadv_hardif_remove_interfaces(),
   by Sven Eckelmann

 - delete duplicated words, by Randy Dunlap

 - Drop (even more) repeated words in comments, by Sven Eckelmann

 - Migrate to linux/prandom.h, by Sven Eckelmann
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Subbaraya Sundeep says:

====================
Add PTP support for Octeontx2

This patchset adds PTP support for Octeontx2 platform.
PTP is an independent coprocessor block from which
CGX block fetches timestamp and prepends it to the
packet before sending to NIX block. Patches are as
follows:

Patch 1: Patch to enable/disable packet timstamping
         in CGX upon mailbox request. It also adjusts
         packet parser (NPC) for the 8 bytes timestamp
         appearing before the packet.

Patch 2: Patch adding PTP pci driver which configures
         the PTP block and hooks up to RVU AF driver.
         It also exposes a mailbox call to adjust PTP
         hardware clock.

Patch 3: Patch adding PTP clock driver for PF netdev.

v8:
 Added missing header file reported by kernel test robot
 in patch 2
v7:
 As per Jesse Brandeburg comments:
 Simplified functions in patch 1
 Replaced magic numbers with macros
 Added Copyrights
 Added code comments wherever required
 Modified commit description of patch 2
v6:
 Resent after net-next is open
v5:
 As suggested by David separated the fix (adding rtnl lock/unlock)
 and submitted to net.
 https://www.spinics.net/lists/netdev/msg669617.html
v4:
 Added rtnl_lock/unlock in otx2_reset to protect against
 network stack ndo_open and close calls
 Added NULL check after ptp_clock_register in otx2_ptp.c
v3:
 Fixed sparse error in otx2_txrx.c
 Removed static inlines in otx2_txrx.c
v2:
 Fixed kernel build robot reported error by
 adding timecounter.h to otx2_common.h
====================
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds PTP clock and uses it in Octeontx2
network device. PTP clock uses mailbox calls to
access the hardware counter on the RVU side.
Co-developed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Aleksey Makarov <amakarov@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Precision Timestamping block found on Octeontx2
platform is an independent coprocessor and has
internal PTP hardware clock. Once configured PTP
runs independently and when a packet arrives
CGX hardware block gets the current timestamp
from PTP block and forwards the packet to NIX
by prepending timestamp to the packet.
This patch adds the pci driver for PTP block.
The driver gets registered by AF driver and does
initial configuration and exposes a mailbox function to
read and adjust PTP hardware clock. The mailbox function
is called by AF consumers like netdev drivers or
userspace drivers. Since PTP being a single block
in platform this driver helps in accessing PTP
block by any AF consumer.
Co-developed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Aleksey Makarov <amakarov@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Four new mbox messages ids and handler are added in order to
enable or disable timestamping procedure on tx and rx side.
Additionally when PTP is enabled, the packet parser must skip
over 8 bytes and start analyzing packet data there. To make NPC
profiles work seemlesly PTR_ADVANCE of IKPU is set so that
parsing can be done as before when all data pointers
are shifted by 8 bytes automatically.
Co-developed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Zyta Szpak <zyta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use helper macro RT_TOS() to get tos in __icmp_send().
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no need to fetch errno and fatal info from icmp_err_convert when
icmp code is ICMP_FRAG_NEEDED.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Igor Russkikh says:

====================
qed: introduce devlink health support

This is a followup implementation after series

https://patchwork.ozlabs.org/project/netdev/cover/20200514095727.1361-1-irusskikh@marvell.com/

This is an implementation of devlink health infrastructure.

With this we are now able to report HW errors to devlink, and it'll take
its own actions depending on user configuration to capture and store the
dump at the bad moment, and to request the driver to recover the device.

So far we do not differentiate global device failures or specific PCI
function failures. This means that some errors specific to one physical
function will affect an entire device. This is not yet fully designed
and verified, will followup in future.

Solution was verified with artificial HW errors generated, existing
tools for dump analysis could be used.

v7: comments from Jesse and Jakub
 - p2: extra edev check
 - p9: removed extra indents
v6: patch 4: changing serial to board.serial and fw to fw.app
v5: improved patch 4 description
v4:
 - commit message and other fixes after Jiri's comments
 - removed one patch (will send to net)
v3: fix uninit var usage in patch 11
v2: fix #include issue from kbuild test robot.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>