- 25 Oct, 2023 2 commits
-
-
Nandha Kumar Singaram authored
Adhere to linux coding style. Reported by checkpatch.pl: CHECK: Lines should not end with a '(' Signed-off-by:Nandha Kumar Singaram <nandhakumar.singaram@gmail.com> Link: https://lore.kernel.org/r/5f63b332c83f5f0e95f59e673b0292c27fecb411.1697976302.git.nandhakumar.singaram@gmail.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nandha Kumar Singaram authored
Adhere to linux coding style. Reported by checkpatch.pl: CHECK: Alignment should match open parenthesis Signed-off-by:
-
- 22 Oct, 2023 5 commits
-
-
Gilbert Adikankwu authored
Remove byte Type encoding "by" from variable name and replace camelcase with snakecase. Fix checkpatch.pl error: CHECK: Avoid CamelCase: <byEIFS> Signed-off-by:
Gilbert Adikankwu <gilbertadikankwu@gmail.com> Tested-by:
Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/4428aa96453516b6706b1a834c46e3f6e70b5828.1697927812.git.gilbertadikankwu@gmail.comSigned-off-by:
-
Gilbert Adikankwu authored
Remove byte Type encoding "by" from variable name and replace camelcase with snakecase Fix checkpatch.pl error: CHECK: Avoid CamelCase: <byDIFS> Signed-off-by:
-
Gilbert Adikankwu authored
Remove byte Type encoding "by" from variable name and replace camelcase with snakecase Fix checkpatch.pl error: CHECK: Avoid CamelCase: <bySIFS> Signed-off-by:
-
Gilbert Adikankwu authored
Remove byte Type encoding "by" from variable name and replace camelcase with snakecase. Fix checkpatch.pl error: CHECK: Avoid CamelCase: <bySlot> Signed-off-by:
-
Gilbert Adikankwu authored
Remove byte Type encoding "by" from variable name and replace camelcase with snakecase Fix checkpatch.pl error: CHECK: Avoid CamelCase: <byCWMaxMin> Signed-off-by:
-
- 21 Oct, 2023 17 commits
-
-
Michael Straube authored
Clean up comparisons to NULL to improve readability. Reported by checkpatch. if (x == NULL) -> if (!x) if (x != NULL) -> if (x) Signed-off-by:
Michael Straube <straube.linux@gmail.com> Tested-by:
-
Soumya Negi authored
vme_check_window() uses printk() for logging error message. This leads to the following checkpatch warning: WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Use dev_err() instead. Pass VME bridge device to vme_check_window() so that the error message can be logged with the bridge device context. Signed-off-by:Soumya Negi <soumya.negi97@gmail.com> Suggested-by:
-
Soumya Negi authored
Don't check for empty bridge device & resource in vme_alloc_consistent() & vme_free_consistent() since they can not be NULL. Both the VME bridge device and the VME resource that are used in these functions are set at probe time. Signed-off-by:
-
Soumya Negi authored
Don't log error message in find_bridge(). The printk() triggers a checkpatch warning: WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... It can't be replaced by dev_err() & using pr_err() is not helpful as it doesn't give much context to the user. It is better to remove it. Signed-off-by: -
Soumya Negi authored
Replace function names in message strings with __func__ to fix all checkpatch warnings like: WARNING: Prefer using '"%s...", __func__' to using 'vme_lm_get', this function's name, in a string Signed-off-by:Andi Shyti <andi.shyti@linux.intel.com> Link: https://lore.kernel.org/r/db4ad6b878c4bb08fd5d15cf4a9287d7bb8c30df.1697763267.git.soumya.negi97@gmail.comSigned-off-by:
-
Soumya Negi authored
vme.c uses printk() to log messages. To improve and standardize message formatting, use logging mechanisms dev_err()/dev_warn() instead. Retain the printk log levels of the messages during replacement. Issue found by checkpatch.pl Signed-off-by:
-
Gary Rookard authored
Renamed from Pascal/CamelCase to Snake case the variable HTUpdateDefaultSetting, HTUpateDefaultSetting -> ht_update_default_setting Linux kernel coding style (cleanup), checkpatch Avoid CamelCase. Driver rtl8192e compiles. Signed-off-by:
Gary Rookard <garyrookard@fastmail.org> Link: https://lore.kernel.org/r/20231021014759.29844-1-garyrookard@fastmail.orgSigned-off-by:
-
Dorcas AnonoLitunya authored
Drops variable ret as it is unused in the code. This therefore modifies the return type of program_mode_registers() to void from int since the return value is being ignored in all function calls. This improves code readability and maintainability. Suggested-by:
Dorcas AnonoLitunya <anonolitunya@gmail.com> Link: https://lore.kernel.org/r/20231019101348.22076-3-anonolitunya@gmail.comSigned-off-by:
-
Calvince Otieno authored
The function snd_bcm2835_new_ctl() is declared but not defined. Its definition was removed 1 year ago in the commit 143b67f1 ("staging: bcm2835-audio: remove compat ALSA card") Signed-off-by:
Calvince Otieno <calvncce@gmail.com> Link: https://lore.kernel.org/r/ZTDap2d5X7eXXPo2@lab-ubuntuSigned-off-by:
-
Soumya Negi authored
Fix WARNING: Missing a blank line after declarations Issue found by checkpatch.pl Signed-off-by:
-
Calvince Otieno authored
Checkpatch suggests using strscpy() instead of strcpy(). The advantages of strscpy() are that it always adds a NUL terminator and prevents read/write overflows if the source string is not properly terminated. strcpy() lacks built-in bounds checking for the destination buffer, making it susceptible to buffer overflows. These overflows can lead to various unpredictable behaviors. In this specific context, both strscpy and strcpy performs the same operation without any functional difference. The reason for this equivalence is that the driver_name string "vme_fake" is shorter than the size of the fake_bridge->name array which is defined as 16 characters (struct vme_bridge {char name[VMENAMSIZ];...}). Thus, there is no risk of buffer overflow in either case. VMENAMSIZ variable holds a constant value of 16 (#define VMENAMSIZ 16) The null-terminated "vme_fake" string (static const char driver_name[] = "vme_fake";) can be safely copied into fake_bridge->name using either strscpy or strcpy. While using strscpy() does not address any bugs, it is considered a better practice and aligns with checkpatch recommendations. Reviewed-by:Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by:
-
Umang Jain authored
Drop MODULE_ALIAS in favour of MODULE_DEVICE_TABLE as the module alias should be picked from there. Signed-off-by:
Umang Jain <umang.jain@ideasonboard.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Kieran Bingham <kieran.bingham@ideasonboard.com> Link: https://lore.kernel.org/r/20231019090128.430297-4-umang.jain@ideasonboard.comSigned-off-by:
-
Umang Jain authored
Drop MODULE_ALIAS in favour of MODULE_DEVICE_TABLE as the module alias should be dropped from there. Signed-off-by:
-
Umang Jain authored
VC04 has now a independent bus vchiq_bus to register its devices. However, the module auto-loading for bcm2835-audio and bcm2835-camera currently happens through MODULE_ALIAS() macro specified explicitly. The correct way to auto-load a module, is when the alias is picked out from MODULE_DEVICE_TABLE(). In order to get there, we need to introduce vchiq_device_id and add relevant entries in file2alias.c infrastructure so that aliases can be generated. This patch targets adding vchiq_device_id and do_vchiq_entry, in order to generate those alias using the /script/mod/file2alias.c. Going forward the MODULE_ALIAS() from bcm2835-camera and bcm2835-audio will be dropped, in favour of MODULE_DEVICE_TABLE being used there. The alias format for vchiq_bus devices will be "vchiq:<dev_name>". Adjust the vchiq_bus_uevent() to reflect that. Signed-off-by:
-
Umang Jain authored
As per device_register() documentation, this kfree() on error path will crash. The call to put_device() is all that is needed here to free the memory. Fixes: 027e5703 ("staging: vc04_services: vchiq_arm: Add new bus type and device type") Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/20231018055228.825524-1-umang.jain@ideasonboard.comSigned-off-by:
-
Benjamin Poirier authored
No significant improvements have been done to this driver since commit a7c3ddf2 ("staging: qlge: clean up debugging code in the QL_ALL_DUMP ifdef land") in January 2021. The driver should not stay in staging forever. Since it has been abandoned by the vendor and no one has stepped up to maintain it, delete it. If some users manifest themselves, the driver will be restored to drivers/net/ as suggested in the linked message. Link: https://lore.kernel.org/netdev/20231019074237.7ef255d7@kernel.org/Suggested-by:
Jakub Kicinski <kuba@kernel.org> Cc: Manish Chopra <manishc@marvell.com> Cc: Coiby Xu <coiby.xu@gmail.com> Signed-off-by:
Benjamin Poirier <benjamin.poirier@gmail.com> Acked-by:
-
Benjamin Poirier authored
Update TODO file to reflect the changes that have been done: * multiple functions were renamed to have the "qlge_" prefix in commit f8c047be ("staging: qlge: use qlge_* prefix to avoid namespace clashes with other qlogic drivers") * a redundant memset() was removed in commit 953b9400 ("staging: qlge: Initialize devlink health dump framework") * the loop boundary in ql(ge)_alloc_rx_buffers() was updated in commit e4c911a7 ("staging: qlge: Remove rx_ring.type") * pci_enable_msi() was replaced in commit 4eab532d ("staging: qlge/qlge_main.c: Replace depracated MSI API.") * pci_dma_* were replaced in commit e955a071 ("staging: qlge: replace deprecated apis pci_dma_*") * the while loops were rewritten in commit 41e1bf81 ("Staging: qlge: Rewrite two while loops as simple for loops") * indentation was fixed in commit 0eb79fd1 ("staging: qlge: cleanup indent in qlge_main.c") I also slipped in one new TODO item, naughty me! Signed-off-by:
-
- 17 Oct, 2023 13 commits
-
-
Calvince Otieno authored
The function prism2sta_ev_txexc() is called by the function hfa384x_usbin_txcompl() to print the transmit exception event - a debug information using netdev_dbg(). The debugging utility function can be called directly by hfa384x_usbin_txcompl(). Signed-off-by:
-
Calvince Otieno authored
This patch replaces the usage of pr_debug() with netdev_dbg(). The change is made to enhance context-aware debugging, improve code clarity, and maintain compatibility with established network debugging practices. There were no functional code changes. Signed-off-by:
-
Nandha Kumar Singaram authored
Adhere to linux coding style. Reported by checkpatch.pl: CHECK: Lines should not end with a '(' Signed-off-by: -
Gilbert Adikankwu authored
Remove byte Type encoding "by" from variable name and replace camelcase with snakecase. Mute checkpatch error: CHECK: Avoid CamelCase: <byBBPreEDRSSI> Signed-off-by:
-
Gilbert Adikankwu authored
Remove byte Type encoding "by" from variable name and replace camelcase with snakecase Mute checkpatch.pl error: CHECK: Avoid CamelCase: <byCurPwr> Signed-off-by:
-
Gilbert Adikankwu authored
Remove byte Type encoding "by" from variable name and replace camelcase with snakecase. Mute checkpatch.pl error: CHECK: Avoid CamelCase: <byCurrentCh> Signed-off-by:
-
Gilbert Adikankwu authored
Remove bool Type encoding "b" from variable name and replace camelcase with snakecase. Mute checkpatch.pl error: CHECK: Avoid CamelCase: <bUpdateBBVGA> Signed-off-by:
-
Dorcas AnonoLitunya authored
Rename function ddk750_setModeTiming to ddk750_set_mode_timing. This patch affects three files as the function is imported to other external files. This follows snakecase naming convention and ensures a consistent naming style throughout the file. Issue found by checkpatch. Mutes the following checkpatch error: CHECK:Avoid CamelCase: <ddk750_setModeTiming> Signed-off-by:
-
Dorcas AnonoLitunya authored
Rename function programModeRegisters to program_mode_registers. This follows snakecase naming convention and ensures a consistent naming style throughout the file. Issue found by checkpatch. Mutes the following checkpatch error: CHECK: Avoid CamelCase: <programModeRegisters> Signed-off-by:
-
Dorcas AnonoLitunya authored
Rename variable dispControl to disp_control. This follows snakecase naming convention and ensures a consistent naming style throughout the file. Issue found by checkpatch. Mutes the following checkpatch error: CHECK: Avoid CamelCase: <dispControl> Signed-off-by:
-
Dorcas AnonoLitunya authored
Rename variable pModeParam to mode_param. This follows snakecase naming convention and ensures a consistent naming style throughout the file. Issue found by checkpatch. Mutes the following checkpatch error: CHECK: Avoid CamelCase: <pModeParam> Signed-off-by:
-
Dorcas AnonoLitunya authored
Rename function displayControlAdjust_SM750E to display_control_adjust_SM750E. This follows snakecase naming convention and ensures a consistent naming style throughout the file. Issue found by checkpatch. Mutes the following error: CHECK:Avoid CamelCase: <displayControlAdjust_SM750E> Signed-off-by:
-
Greg Kroah-Hartman authored
In commit 697455ce ("staging: rtl8192u: Remove broken driver"), the driver was removed, along with the Kconfig entry, but the Makefile line in drivers/staging/Makefile was not updated, so things like 'make clean' fail to work properly as they will decend into all subdirectories to try to clean things up. Resolve this by removing the entry in the main staging Makefile. Reported-by:
Thorsten Leemhuis <linux@leemhuis.info> Cc: Philipp Hortmann <philipp.g.hortmann@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Fixes: 697455ce ("staging: rtl8192u: Remove broken driver") Tested-by:
-
- 16 Oct, 2023 3 commits
-
-
Calvince Otieno authored
This patch replaces the usage of pr_debug() with netdev_dbg(). The change is made to enhance context-aware debugging, improve code clarity, and maintain compatibility with established network debugging practices. There were no functional code changes. Signed-off-by:
-
Calvince Otieno authored
Checkpatch suggests the use of strscpy() instead of strncpy(). The advantages are that it always adds a NUL terminator and it prevents a read overflow if the src string is not properly terminated. One potential disadvantage is that it doesn't zero pad the string like strncpy() does. In this code, strscpy() and strncpy() are equivalent and it does not affect runtime behavior. The string is zeroed on the line before using memset(). The resulting string was always NUL terminated and PRISM2_USB_FWFILE is string literal "prism2_ru.fw" so it's NUL terminated. However, even though using strscpy() does not fix any bugs, it's still nicer and makes checkpatch happy. Signed-off-by:
-
Calvince Otieno authored
The function p80211wext_get_wireless_stats() is declared in the code but has neither been defined nor referenced. It's definition was removed 13 years ago in the commit cb3126e6 ("Staging: wlan-ng: Switch from wext to cfg80211") Signed-off-by:
-
