The use of kmap_atomic() is being deprecated in favor of
kmap_local_page()[1], and this patch converts the call from
kmap_atomic() to kmap_local_page().

The main difference between atomic and local mappings is that local
mappings doesn't disable page faults or preemption  (the preemption is
disabled for !PREEMPT_RT case, otherwise it only disables migration).

With kmap_local_page(), we can avoid the often unwanted side effect of
unnecessary page faults or preemption disables.

In drm/i915/gt/uc/intel_us_fw.c, the function intel_uc_fw_copy_rsa()
just use the mapping to do memory copy so it doesn't need to disable
pagefaults and preemption for mapping. Thus the local mapping without
atomic context (not disable pagefaults / preemption) is enough.

Therefore, intel_uc_fw_copy_rsa() is a function where the use of
memcpy_from_page() with kmap_local_page() in place of memcpy() with
kmap_atomic() is correctly suited.

Convert the calls of memcpy() with kmap_atomic() / kunmap_atomic() to
memcpy_from_page() which uses local mapping to copy.

[1]: https://lore.kernel.org/all/20220813220034.806698-1-ira.weiny@intel.com/T/#uSuggested-by: Ira Weiny <ira.weiny@intel.com>
Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203132947.2328805-8-zhao1.liu@linux.intel.com

The use of kmap_atomic() is being deprecated in favor of
kmap_local_page()[1], and this patch converts the call from
kmap_atomic() to kmap_local_page().

The main difference between atomic and local mappings is that local
mappings doesn't disable page faults or preemption.

With kmap_local_page(), we can avoid the often unwanted side effect of
unnecessary page faults or preemption disables.

In drm/i915/gem/selftests/i915_gem_context.c, functions cpu_fill() and
cpu_check() mainly uses mapping to flush cache and check/assign the
value.

There're 2 reasons why cpu_fill() and cpu_check() don't need to disable
pagefaults and preemption for mapping:

1. The flush operation is safe. cpu_fill() and cpu_check() call
drm_clflush_virt_range() to use CLFLUSHOPT or WBINVD to flush. Since
CLFLUSHOPT is global on x86 and WBINVD is called on each cpu in
drm_clflush_virt_range(), the flush operation is global.

2. Any context switch caused by preemption or page faults (page fault
may cause sleep) doesn't affect the validity of local mapping.

Therefore, cpu_fill() and cpu_check() are functions where the use of
kmap_local_page() in place of kmap_atomic() is correctly suited.

Convert the calls of kmap_atomic() / kunmap_atomic() to
kmap_local_page() / kunmap_local().

[1]: https://lore.kernel.org/all/20220813220034.806698-1-ira.weiny@intel.comSuggested-by: Dave Hansen <dave.hansen@intel.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203132947.2328805-7-zhao1.liu@linux.intel.com

The use of kmap_atomic() is being deprecated in favor of
kmap_local_page()[1], and this patch converts the call from
kmap_atomic() to kmap_local_page().

The main difference between atomic and local mappings is that local
mappings doesn't disable page faults or preemption (the preemption is
disabled for !PREEMPT_RT case, otherwise it only disables migration)..

With kmap_local_page(), we can avoid the often unwanted side effect of
unnecessary page faults or preemption disables.

In drm/i915/gem/selftests/i915_gem_coherency.c, functions cpu_set()
and cpu_get() mainly uses mapping to flush cache and assign the value.
There're 2 reasons why cpu_set() and cpu_get() don't need to disable
pagefaults and preemption for mapping:

1. The flush operation is safe. cpu_set() and cpu_get() call
drm_clflush_virt_range() to use CLFLUSHOPT or WBINVD to flush. Since
CLFLUSHOPT is global on x86 and WBINVD is called on each cpu in
drm_clflush_virt_range(), the flush operation is global.

2. Any context switch caused by preemption or page faults (page fault
may cause sleep) doesn't affect the validity of local mapping.

Therefore, cpu_set() and cpu_get() are functions where the use of
kmap_local_page() in place of kmap_atomic() is correctly suited.

Convert the calls of kmap_atomic() / kunmap_atomic() to
kmap_local_page() / kunmap_local().

[1]: https://lore.kernel.org/all/20220813220034.806698-1-ira.weiny@intel.comSuggested-by: Dave Hansen <dave.hansen@intel.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203132947.2328805-6-zhao1.liu@linux.intel.com

The use of kmap_atomic() is being deprecated in favor of
kmap_local_page()[1], and this patch converts the call from
kmap_atomic() to kmap_local_page().

The main difference between atomic and local mappings is that local
mappings doesn't disable page faults or preemption (the preemption is
disabled for !PREEMPT_RT case, otherwise it only disables migration).

With kmap_local_page(), we can avoid the often unwanted side effect of
unnecessary page faults or preemption disables.

In drm/i915/gem/selftests/huge_pages.c, function __cpu_check_shmem()
mainly uses mapping to flush cache and check the value. There're
2 reasons why __cpu_check_shmem() doesn't need to disable pagefaults
and preemption for mapping:

1. The flush operation is safe. Function __cpu_check_shmem() calls
drm_clflush_virt_range() to use CLFLUSHOPT or WBINVD to flush. Since
CLFLUSHOPT is global on x86 and WBINVD is called on each cpu in
drm_clflush_virt_range(), the flush operation is global.

2. Any context switch caused by preemption or page faults (page fault
may cause sleep) doesn't affect the validity of local mapping.

Therefore, __cpu_check_shmem() is a function where the use of
kmap_local_page() in place of kmap_atomic() is correctly suited.

Convert the calls of kmap_atomic() / kunmap_atomic() to
kmap_local_page() / kunmap_local().

[1]: https://lore.kernel.org/all/20220813220034.806698-1-ira.weiny@intel.comSuggested-by: Dave Hansen <dave.hansen@intel.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203132947.2328805-5-zhao1.liu@linux.intel.com

The use of kmap_atomic() is being deprecated in favor of
kmap_local_page()[1].

The main difference between atomic and local mappings is that local
mappings doesn't disable page faults or preemption (the preemption is
disabled for !PREEMPT_RT case, otherwise it only disables migration).

With kmap_local_page(), we can avoid the often unwanted side effect of
unnecessary page faults or preemption disables.

In drm/i915/gem/i915_gem_shmem.c, the function shmem_pwrite() need to
disable pagefault to eliminate the potential recursion fault[2]. But
here __copy_from_user_inatomic() doesn't need to disable preemption and
local mapping is valid for sched in/out.

So it can use kmap_local_page() / kunmap_local() with
pagefault_disable() / pagefault_enable() to replace atomic mapping.

[1]: https://lore.kernel.org/all/20220813220034.806698-1-ira.weiny@intel.com
[2]: https://patchwork.freedesktop.org/patch/295840/Suggested-by: Ira Weiny <ira.weiny@intel.com>
Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203132947.2328805-4-zhao1.liu@linux.intel.com

The use of kmap_atomic() is being deprecated in favor of
kmap_local_page()[1],  and this patch converts the call from
kmap_atomic() + memcpy() to memcpy_[from/to]_page(), which use
kmap_local_page() to build local mapping and then do memcpy().

The main difference between atomic and local mappings is that local
mappings doesn't disable page faults or preemption (the preemption is
disabled for !PREEMPT_RT case, otherwise it only disables migration).

With kmap_local_page(), we can avoid the often unwanted side effect of
unnecessary page faults and preemption disables.

In drm/i915/gem/i915_gem_phys.c, the functions
i915_gem_object_get_pages_phys() and i915_gem_object_put_pages_phys()
don't need to disable pagefaults and preemption for mapping because of
2 reasons:

1. The flush operation is safe. In drm/i915/gem/i915_gem_object.c,
i915_gem_object_get_pages_phys() and i915_gem_object_put_pages_phys()
calls drm_clflush_virt_range() to use CLFLUSHOPT or WBINVD to flush.
Since CLFLUSHOPT is global on x86 and WBINVD is called on each cpu in
drm_clflush_virt_range(), the flush operation is global.

2. Any context switch caused by preemption or page faults (page fault
may cause sleep) doesn't affect the validity of local mapping.

Therefore, i915_gem_object_get_pages_phys() and
i915_gem_object_put_pages_phys() are two functions where the uses of
local mappings in place of atomic mappings are correctly suited.

Convert the calls of kmap_atomic() / kunmap_atomic() + memcpy() to
memcpy_from_page() and memcpy_to_page().

[1]: https://lore.kernel.org/all/20220813220034.806698-1-ira.weiny@intel.comSuggested-by: Dave Hansen <dave.hansen@intel.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203132947.2328805-3-zhao1.liu@linux.intel.com

The use of kmap_atomic() is being deprecated in favor of
kmap_local_page()[1], and this patch converts the call from
kmap_atomic() to kmap_local_page().

The main difference between atomic and local mappings is that local
mappings doesn't disable page faults or preemption (the preemption is
disabled for !PREEMPT_RT case, otherwise it only disables migration).

With kmap_local_page(), we can avoid the often unwanted side effect of
unnecessary page faults and preemption disables.

There're 2 reasons why i915_gem_object_read_from_page_kmap() doesn't
need to disable pagefaults and preemption for mapping:

1. The flush operation is safe. In drm/i915/gem/i915_gem_object.c,
i915_gem_object_read_from_page_kmap() calls drm_clflush_virt_range() to
use CLFLUSHOPT or WBINVD to flush. Since CLFLUSHOPT is global on x86
and WBINVD is called on each cpu in drm_clflush_virt_range(), the flush
operation is global.

2. Any context switch caused by preemption or page faults (page fault
may cause sleep) doesn't affect the validity of local mapping.

Therefore, i915_gem_object_read_from_page_kmap() is a function where
the use of kmap_local_page() in place of kmap_atomic() is correctly
suited.

Convert the calls of kmap_atomic() / kunmap_atomic() to
kmap_local_page() / kunmap_local().

And remove the redundant variable that stores the address of the mapped
page since kunmap_local() can accept any pointer within the page.

[1]: https://lore.kernel.org/all/20220813220034.806698-1-ira.weiny@intel.comSuggested-by: Dave Hansen <dave.hansen@intel.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203132947.2328805-2-zhao1.liu@linux.intel.com

Enable Force Dispatch Ends Collection for DG2.

BSpec: 46001
Signed-off-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213064612.480032-1-haridhar.kalvala@intel.com

Use "its" for possessive form instead of "it's".
Hyphenate multi-word adjectives.
Correct some spelling.
End one line of code with ';' instead of ','. The before and after
  object files are identical.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213044014.21410-1-rdunlap@infradead.org

Updated i915 hwmon with fixes for issues reported by static analysis tool.
Fixed integer overflow with upcasting.

v2:
- Added Fixes tag (Badal).
- Updated commit message as per review comments (Anshuman).

Fixes: 4c2572fe ("drm/i915/hwmon: Expose power1_max_interval")
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204144809.1518704-1-karthik.poosa@intel.com

There is a spelling mistake in a pr_err error message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231209230541.4055786-1-colin.i.king@gmail.com

Given a reference to "guc", the guc_to_i915() returns the
pointer to "i915" private data.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231206184322.57111-1-andi.shyti@linux.intel.com

After i915_active_unlock_wait i915_active can be still non-idle due
to barrier async handling in signal_irq_work. As a result one can observe
following errors:
bcs0: heartbeat pulse did not flush idle tasks
*ERROR* pulse active pulse_active [i915]:pulse_retire [i915]
*ERROR* pulse    count: 0
*ERROR* pulse    preallocated barriers? no

To prevent it let's wait explicitly for idleness.

v2: wait only in live_idle tests
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231205-selftest_wait_for_active_idle_event-v2-1-1437d0bf9829@intel.com

Commit 50357944 ("drm/i915/gsc: Mark internal GSC engine with reserved uabi class")
made the GSC0 engine not have a valid uabi class and so broke the engine
reset counting, which in turn was made class based in cb823ed9 ("drm/i915/gt: Use intel_gt as the primary object for handling resets").

Despite the title and commit text of the latter is not mentioning it (and
has left the storage array incorrectly sized), tracking by class, despite
it adding aliasing in hypthotetical multi-tile systems, is handy for
virtual engines which for instance do not have a valid engine->id.

Therefore we keep that but just change it to use the internal class which
is always valid. We also add a helper to increment the count, which
aligns with the existing getter.

What was broken without this fix were out of bounds reads every time a
reset would happen on the GSC0 engine, or during selftests when storing
and cross-checking the counts in igt_live_test_begin and
igt_live_test_end.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: dfed6b58 ("drm/i915/gsc: Mark internal GSC engine with reserved uabi class")
[tursulin: fixed Fixes tag]
Reported-by: Alan Previn Teres Alexis <alan.previn.teres.alexis@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231201122109.729006-2-tvrtko.ursulin@linux.intel.com

Engine->id namespace is per-tile so struct igt_live_test->reset_engine[]
needs to be two-dimensional so engine reset counts from all tiles can be
stored with no aliasing. With aliasing, if we had a real multi-tile
platform, the reset counts would be incorrect for same engine instance on
different tiles.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 0c29efa2 ("drm/i915/selftests: Consider multi-gt instead of to_gt()")
Reported-by: Alan Previn Teres Alexis <alan.previn.teres.alexis@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231201122109.729006-1-tvrtko.ursulin@linux.intel.com

There is a mechanism for reporting errors from fire and forget H2G
messages. This is the only way to find out about almost any error in
the GuC backend submission path. So it would be useful to know that it
is working.

v2: Fix some dumb over-complications and a couple of typos - review
feedback from Daniele.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231114010016.234570-3-John.C.Harrison@Intel.com

Noticed that the hangcheck selftest is submitting a non-preemptoble
spinner. That means that even if the GuC does not die, the heartbeat
will still kick in and trigger a reset. Which is rather defeating the
purpose of the test - to verify that the heartbeat will kick in if the
GuC itself has died. The test is deliberately killing the GuC, so it
should never hit the case of a non-dead GuC. But it is not impossible
that the kill might fail at some future point due to other driver
re-work.

So, make the spinner pre-emptible. That way the heartbeat can get
through if the GuC is alive and context switching. Thus a reset only
happens if the GuC dies. Thus, if the kill should stop working the
test will now fail rather than claim to pass.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231114010016.234570-2-John.C.Harrison@Intel.com

The gt wedged could be triggered by missing guc firmware file, HW not
working, etc. Once triggered, it means all gt usage is dead, therefore we
can't enable pxp under this fatal error condition.

v2: Updated commit message.
v3: Updated return code check.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231113224953.378534-1-zhanjun.dong@intel.com

Debugging PXP issues can't even begin without understanding precedding
sequence of important events. Add drm_dbg into the most important PXP
events.

 v5 : - rebase.
 v4 : - rebase.
 v3 : - move gt_dbg to after mutex block in function
        i915_gsc_proxy_component_bind. (Vivaik)
 v2 : - remove __func__ since drm_dbg covers that (Jani).
      - add timeout dbg of the restart from front-end (Alan).
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Vivaik Balasubrawmanian <vivaik.balasubrawmanian@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122191523.58379-1-alan.previn.teres.alexis@intel.com

This workaround has been dropped from all DG2 variants in the latest
workaround database update.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127190043.4099109-2-matthew.d.roper@intel.com

ATS-M device ID update.

BSpec: 44477
Signed-off-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231120113731.1570589-1-haridhar.kalvala@intel.com

Track every intel_gt_pm_get() until its corresponding release in
intel_gt_pm_put() by returning a cookie to the caller for acquire that
must be passed by on released. When there is an imbalance, we can see who
either tried to free a stale wakeref, or who forgot to free theirs.

v2: track recently added calls in gen8_ggtt_bind_get_ce and
    destroyed_worker_func
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030-ref_tracker_i915-v1-2-006fe6b96421@intel.com

Beside reusing existing code, the main advantage of ref_tracker is
tracking per instance of wakeref. It allows also to catch double
put.
On the other side we lose information about the first acquire and
the last release, but the advantages outweigh it.
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030-ref_tracker_i915-v1-1-006fe6b96421@intel.com

The GSC CS is not exposed to the user, so we skipped assigning a uabi
class number for it. However, the trace logs use the uabi class and
instance to identify the engine, so leaving uabi class unset makes the
GSC CS show up as the RCS in those logs.

Given that the engine is not exposed to the user, we can't add a new
case in the uabi enum, so we insted internally define a kernel
internal class as -1.

At the same time remove special handling for the name and complete
the uabi_classes array so internal class is automatically correctly
assigned.

Engine will show as 65535:0 other0 in the logs/traces which should
be unique enough.

v2:
 * Fix uabi class u8 vs u16 type confusion.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 194babe2 ("drm/i915/mtl: don't expose GSC command streamer to the user")
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231116084456.291533-1-tvrtko.ursulin@linux.intel.com

__rcu annotation is needed to avoid the sparse warnings such as:

  .../i915_drm_client.c:92:9: sparse: sparse: incompatible types in comparison expression (different address spaces):
  .../i915_drm_client.c:92:9: sparse:    struct list_head [noderef] __rcu *
  .../i915_drm_client.c:92:9: sparse:    struct list_head *
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 96885303 ("drm/i915: Implement fdinfo memory stats printing")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311110610.h0m6ydI5-lkp@intel.com/
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231113085457.199053-2-tvrtko.ursulin@linux.intel.com

There is no need to return anything in the version which was merged and
also the implementation of the !CONFIG_PROC_FS wasn't returning anything,
causing a build failure there.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: e4ae85e3 ("drm/i915: Add ability for tracking buffer objects per client")
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311110104.8TlHVxUI-lkp@intel.com/Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231113085457.199053-1-tvrtko.ursulin@linux.intel.com

Commit 78cc55e0 ("drm/i915/mcr: Hold GT forcewake during steering
operations") introduced the workaround which was in early stages. With a
valid lineage number update Workaround for future tracking.

Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231116212511.1760446-1-radhakrishna.sripada@intel.com

The workaround database was just updated to extend this workaround to
DG2-G11 (whereas previously it applied only to G10 and G12).
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231115182117.2551522-2-matthew.d.roper@intel.com

On MTL, the HuC is only supported on the media GT, so our validation
check on the module parameter detects an inconsistency on the root GT
(the modparams asks to enable HuC, but the support is not there) and
prints the following info message:

[drm] GT0: Incompatible option enable_guc=3 - HuC is not supported!

This can be confusing to the user and make them think that something is
wrong when it isn't, so we need to silence it.
Given that any platform that supports HuC also supports GuC, if a user
tries to enable HuC on a platform that really doesn't support it they'll
already see a message about GuC not being supported, so instead of just
silencing the HuC message on newer platforms we can just get rid of it
entirely.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231109235436.2349963-1-daniele.ceraolospurio@intel.com

The only task of intel_gt_release_all is to zero gt table. Calling
it on error path prevents intel_gt_driver_late_release_all (called from
i915_driver_late_release) to cleanup GTs, causing leakage.
After i915_driver_late_release GT array is not used anymore so
it does not need cleaning at all.

Sample leak report:

BUG i915_request (...): Objects remaining in i915_request on __kmem_cache_shutdown()
...
Object 0xffff888113420040 @offset=64
Allocated in __i915_request_create+0x75/0x610 [i915] age=18339 cpu=1 pid=1454
 kmem_cache_alloc+0x25b/0x270
 __i915_request_create+0x75/0x610 [i915]
 i915_request_create+0x109/0x290 [i915]
 __engines_record_defaults+0xca/0x440 [i915]
 intel_gt_init+0x275/0x430 [i915]
 i915_gem_init+0x135/0x2c0 [i915]
 i915_driver_probe+0x8d1/0xdc0 [i915]

v2: removed whole intel_gt_release_all

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8489
Fixes: bec68cc9 ("drm/i915: Prepare for multiple GTs")
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231115-dont_clean_gt_on_error_path-v2-1-54250125470a@intel.com

Trace requires new-line at the end of message (in opposition to printk),
otherwise trace dump becomes messy.
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231115-eols-v1-1-d47a2f52b807@intel.com

We read RENDER_HEAD as a part of the flush. If GT is in
deeper sleep states, this could lead to read errors since we are
not using a forcewake. Safer to read a shadowed register instead.

Cc: John Harrison <john.c.harrison@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231109192148.475156-1-vinay.belgaumkar@intel.com

Use the newly added drm_print_memory_stats helper to show memory
utilisation of our objects in drm/driver specific fdinfo output.

To collect the stats we walk the per memory regions object lists
and accumulate object size into the respective drm_memory_stats
categories.

v2:
 * Only account against the active region.
 * Use DMA_RESV_USAGE_BOOKKEEP when testing for active. (Tejas)

v3:
 * Update commit text. (Aravind)
 * Update to use memory regions uabi names.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231107101806.608990-6-tvrtko.ursulin@linux.intel.com

At the moment memory region names are a bit too varied and too
inconsistent to be used for ABI purposes, like for upcoming fdinfo
memory stats.

System memory can be either system or system-ttm. Local memory has the
instance number appended, others do not. Not only incosistent but thi
kind of implementation detail is uninteresting for intended users of
fdinfo memory stats.

Add a stable name always formed as $type$instance. Could have chosen a
different stable scheme, but I think any consistent and stable scheme
should do just fine.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231107101806.608990-5-tvrtko.ursulin@linux.intel.com

Account ring buffers and logical context space against the owning client
memory usage stats.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231107101806.608990-4-tvrtko.ursulin@linux.intel.com

Account page table backing store against the owning client memory usage
stats.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231107101806.608990-3-tvrtko.ursulin@linux.intel.com

To enable accounting of indirect client memory usage (such as page tables)
in the following patch, lets start recording the creator of each PPGTT.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231107101806.608990-2-tvrtko.ursulin@linux.intel.com

In order to show per client memory usage lets add some infrastructure
which enables tracking buffer objects owned by clients.

We add a per client list protected by a new per client lock and to support
delayed destruction (post client exit) we make tracked objects hold
references to the owning client.

Also, object memory region teardown is moved to the existing RCU free
callback to allow safe dereference from the fdinfo RCU read section.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231107101806.608990-1-tvrtko.ursulin@linux.intel.com

GCC 14 introduces a new -Walloc-size included in -Wextra which errors out
like:
```
drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c: In function ‘eb_copy_relocations’:
drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c:1681:24: error: allocation of insufficient size ‘1’ for type ‘struct drm_i915_gem_relocation_entry’ with size ‘32’ [-Werror=alloc-size]
 1681 |                 relocs = kvmalloc_array(size, 1, GFP_KERNEL);
      |                        ^

```

So, just swap the number of members and size arguments to match the prototype, as
we're initialising 1 element of size `size`. GCC then sees we're not
doing anything wrong.
Signed-off-by: Sam James <sam@gentoo.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231107215538.1891359-1-sam@gentoo.org

This workaround applies to all steppings of Xe_LPM+. Implement the KMD
part.

v2:
    - Put the definition of VDBOX_CGCTL3F1C() in the correct sort order.
      (Matt)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231106201959.156943-1-gustavo.sousa@intel.com