- 03 Jan, 2013 1 commit
-
-
Sarah Sharp authored
A high speed control or bulk endpoint may have bInterval set to zero, which means it does not NAK. If bInterval is non-zero, it means the endpoint NAKs at a rate of 2^(bInterval - 1). The xHCI code to compute the NAK interval does not handle the special case of zero properly. The current code unconditionally subtracts one from bInterval and uses it as an exponent. This causes a very large bInterval to be used, and warning messages like these will be printed: usb 1-1: ep 0x1 - rounding interval to 32768 microframes, ep desc says 0 microframes This may cause the xHCI host hardware to reject the Configure Endpoint command, which means the HS device will be unusable under xHCI ports. This patch should be backported to kernels as old as 2.6.31, that contain commit dfa49c4a "USB: xhci - fix math in xhci_get_endpoint_interval()". Reported-by:
Vincent Pelletier <plr.vincent@gmail.com> Suggested-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
-
- 22 Dec, 2012 8 commits
-
-
Linus Torvalds authored
-
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog updates from Wim Van Sebroeck: "This includes some fixes and code improvements (like clk_prepare_enable and clk_disable_unprepare), conversion from the omap_wdt and twl4030_wdt drivers to the watchdog framework, addition of the SB8x0 chipset support and the DA9055 Watchdog driver and some OF support for the davinci_wdt driver." * git://www.linux-watchdog.org/linux-watchdog: (22 commits) watchdog: mei: avoid oops in watchdog unregister code path watchdog: Orion: Fix possible null-deference in orion_wdt_probe watchdog: sp5100_tco: Add SB8x0 chipset support watchdog: davinci_wdt: add OF support watchdog: da9052: Fix invalid free of devm_ allocated data watchdog: twl4030_wdt: Change TWL4030_MODULE_PM_RECEIVER to TWL_MODULE_PM_RECEIVER watchdog: remove depends on CONFIG_EXPERIMENTAL watchdog: Convert dev_printk(KERN_<LEVEL> to dev_<level>( watchdog: DA9055 Watchdog driver watchdog: omap_wdt: eliminate goto watchdog: omap_wdt: delete redundant platform_set_drvdata() calls watchdog: omap_wdt: convert to devm_ functions watchdog: omap_wdt: convert to new watchdog core watchdog: WatchDog Timer Driver Core: fix comment watchdog: s3c2410_wdt: use clk_prepare_enable and clk_disable_unprepare watchdog: imx2_wdt: Select the driver via ARCH_MXC watchdog: cpu5wdt.c: add missing del_timer call watchdog: hpwdt.c: Increase version string watchdog: Convert twl4030_wdt to watchdog core davinci_wdt: preparation for switch to common clock framework ...
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull CIFS fixes from Steve French: "Misc small cifs fixes" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: cifs: eliminate cifsERROR variable cifs: don't compare uniqueids in cifs_prime_dcache unless server inode numbers are in use cifs: fix double-free of "string" in cifs_parse_mount_options
-
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dmLinus Torvalds authored
Pull dm update from Alasdair G Kergon: "Miscellaneous device-mapper fixes, cleanups and performance improvements. Of particular note: - Disable broken WRITE SAME support in all targets except linear and striped. Use it when kcopyd is zeroing blocks. - Remove several mempools from targets by moving the data into the bio's new front_pad area(which dm calls 'per_bio_data'). - Fix a race in thin provisioning if discards are misused. - Prevent userspace from interfering with the ioctl parameters and use kmalloc for the data buffer if it's small instead of vmalloc. - Throttle some annoying error messages when I/O fails." * tag 'dm-3.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: (36 commits) dm stripe: add WRITE SAME support dm: remove map_info dm snapshot: do not use map_context dm thin: dont use map_context dm raid1: dont use map_context dm flakey: dont use map_context dm raid1: rename read_record to bio_record dm: move target request nr to dm_target_io dm snapshot: use per_bio_data dm verity: use per_bio_data dm raid1: use per_bio_data dm: introduce per_bio_data dm kcopyd: add WRITE SAME support to dm_kcopyd_zero dm linear: add WRITE SAME support dm: add WRITE SAME support dm: prepare to support WRITE SAME dm ioctl: use kmalloc if possible dm ioctl: remove PF_MEMALLOC dm persistent data: improve improve space map block alloc failure message dm thin: use DMERR_LIMIT for errors ... -
J. Bruce Fields authored
This reverts commit 79f77bf9. This is obviously wrong, and I have no idea how I missed seeing the warning in testing: I must just not have looked at the right logs. The caller bumps rq_resused/rq_next_page, so it will always be hit on a large enough read. Reported-by:
Dave Jones <davej@redhat.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
Pull more infiniband changes from Roland Dreier: "Second batch of InfiniBand/RDMA changes for 3.8: - cxgb4 changes to fix lookup engine hash collisions - mlx4 changes to make flow steering usable - fix to IPoIB to avoid pinning dst reference for too long" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/cxgb4: Fix bug for active and passive LE hash collision path RDMA/cxgb4: Fix LE hash collision bug for passive open connection RDMA/cxgb4: Fix LE hash collision bug for active open connection mlx4_core: Allow choosing flow steering mode mlx4_core: Adjustments to Flow Steering activation logic for SR-IOV mlx4_core: Fix error flow in the flow steering wrapper mlx4_core: Add QPN enforcement for flow steering rules set by VFs cxgb4: Add LE hash collision bug fix path in LLD driver cxgb4: Add T4 filter support IPoIB: Call skb_dst_drop() once skb is enqueued for sending
-
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-genericLinus Torvalds authored
Pull asm-generic cleanup from Arnd Bergmann: "These are a few cleanups for asm-generic: - a set of patches from Lars-Peter Clausen to generalize asm/mmu.h and use it in the architectures that don't need any special handling. - A patch from Will Deacon to remove the {read,write}s{b,w,l} as discussed during the arm64 review - A patch from James Hogan that helps with the meta architecture series." * tag 'asm-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: xtensa: Use generic asm/mmu.h for nommu h8300: Use generic asm/mmu.h c6x: Use generic asm/mmu.h asm-generic/mmu.h: Add support for FDPIC asm-generic/mmu.h: Remove unused vmlist field from mm_context_t asm-generic: io: remove {read,write} string functions asm-generic/io.h: remove asm/cacheflush.h include -
Kukjin Kim authored
Commit db5b0ae0 ("Merge tag 'dt' of git://git.kernel.org/.../arm-soc") causes a duplicated build target. This patch fixes it and sorts out the build target alphabetically so that we can recognize something wrong easily. Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com> Signed-off-by:
-
- 21 Dec, 2012 31 commits
-
-
Mike Snitzer authored
Rename stripe_map_discard to stripe_map_range and reuse it for WRITE SAME bio processing. Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Alasdair G Kergon <agk@redhat.com>
-
Mikulas Patocka authored
This patch removes map_info from bio-based device mapper targets. map_info is still used for request-based targets. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
Eliminate struct map_info from dm-snap. map_info->ptr was used in dm-snap to indicate if the bio was tracked. If map_info->ptr was non-NULL, the bio was linked in tracked_chunk_hash. This patch removes the use of map_info->ptr. We determine if the bio was tracked based on hlist_unhashed(&c->node). If hlist_unhashed is true, the bio is not tracked, if it is false, the bio is tracked. Signed-off-by:
-
Mikulas Patocka authored
This patch removes endio_hook_pool from dm-thin and uses per-bio data instead. This patch removes any use of map_info in preparation for the next patch that removes map_info from bio-based device mapper. Signed-off-by:
-
Mikulas Patocka authored
Don't use map_info any more in dm-raid1. map_info was used for writes to hold the region number. For this purpose we add a new field dm_bio_details to dm_raid1_bio_record. map_info was used for reads to hold a pointer to dm_raid1_bio_record (if the pointer was non-NULL, bio details were saved; if the pointer was NULL, bio details were not saved). We use dm_raid1_bio_record.details->bi_bdev for this purpose. If bi_bdev is NULL, details were not saved, if bi_bdev is non-NULL, details were saved. Signed-off-by:
-
Mikulas Patocka authored
Replace map_info with a per-bio structure "struct per_bio_data" in dm-flakey. Signed-off-by:
-
Mikulas Patocka authored
Rename struct read_record to bio_record in dm-raid1. In the following patch, the structure will be used for both read and write bios, so rename it. Signed-off-by:
-
Mikulas Patocka authored
This patch moves target_request_nr from map_info to dm_target_io and makes it accessible with dm_bio_get_target_request_nr. This patch is a preparation for the next patch that removes map_info. Signed-off-by:
-
Mikulas Patocka authored
Replace tracked_chunk_pool with per_bio_data in dm-snap. Signed-off-by:
-
Mikulas Patocka authored
Replace io_mempool with per_bio_data in dm-verity. Signed-off-by:
-
Mikulas Patocka authored
Replace read_record_pool with per_bio_data in dm-raid1. Signed-off-by:
-
Mikulas Patocka authored
Introduce a field per_bio_data_size in struct dm_target. Targets can set this field in the constructor. If a target sets this field to a non-zero value, "per_bio_data_size" bytes of auxiliary data are allocated for each bio submitted to the target. These data can be used for any purpose by the target and help us improve performance by removing some per-target mempools. Per-bio data is accessed with dm_per_bio_data. The argument data_size must be the same as the value per_bio_data_size in dm_target. If the target has a pointer to per_bio_data, it can get a pointer to the bio with dm_bio_from_per_bio_data() function (data_size must be the same as the value passed to dm_per_bio_data). Signed-off-by:
-
Mike Snitzer authored
Add WRITE SAME support to dm-io and make it accessible to dm_kcopyd_zero(). dm_kcopyd_zero() provides an asynchronous interface whereas the blkdev_issue_write_same() interface is synchronous. WRITE SAME is a SCSI command that can be leveraged for more efficient zeroing of a specified logical extent of a device which supports it. Only a single zeroed logical block is transfered to the target for each WRITE SAME and the target then writes that same block across the specified extent. The dm thin target uses this. Signed-off-by:
-
Mike Snitzer authored
The linear target can already support WRITE SAME requests so signal this by setting num_write_same_requests to 1. Signed-off-by:
-
Mike Snitzer authored
WRITE SAME bios have a payload that contain a single page. When cloning WRITE SAME bios DM has no need to modify the bi_io_vec attributes (and doing so would be detrimental). DM need only alter the start and end of the WRITE SAME bio accordingly. Rather than duplicate __clone_and_map_discard, factor out a common function that is also used by __clone_and_map_write_same. Signed-off-by:
-
Mike Snitzer authored
Allow targets to opt in to WRITE SAME support by setting 'num_write_same_requests' in the dm_target structure. A dm device will only advertise WRITE SAME support if all its targets and all its underlying devices support it. Signed-off-by:
-
Mikulas Patocka authored
If the parameter buffer is small enough, try to allocate it with kmalloc() rather than vmalloc(). vmalloc is noticeably slower than kmalloc because it has to manipulate page tables. In my tests, on PA-RISC this patch speeds up activation 13 times. On Opteron this patch speeds up activation by 5%. This patch introduces a new function free_params() to free the parameters and this uses new flags that record whether or not vmalloc() was used and whether or not the input buffer must be wiped after use. Signed-off-by:
-
Mikulas Patocka authored
When allocating memory for the userspace ioctl data, set some appropriate GPF flags directly instead of using PF_MEMALLOC. Signed-off-by:
-
Joe Thornber authored
Improve space map error message when unable to allocate a new metadata block. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
-
Mike Snitzer authored
Throttle all errors logged from the IO path by dm thin. Signed-off-by:
-
Mike Snitzer authored
Nearly all of persistent-data is in the IO path so throttle error messages with DMERR_LIMIT to limit the amount logged when something has gone wrong. Signed-off-by:
-
Mike Snitzer authored
Reinstate a useful error message when the block manager buffer validator fails. This was mistakenly eliminated when the block manager was converted to use dm-bufio. Signed-off-by:
-
Jonathan Brassow authored
If the user does not supply a bitmap region_size to the dm raid target, a reasonable size is computed automatically. If this is not a power of 2, the md code will report an error later. This patch catches the problem early and rounds the region_size to the next power of two. Signed-off-by:
Jonathan Brassow <jbrassow@redhat.com> Signed-off-by:
-
Joe Thornber authored
Remove unused @data_block parameter from cell_defer. Change thin_bio_map to use many returns rather than setting a variable. Signed-off-by:
-
Joe Thornber authored
Rename cell_defer_except() to cell_defer_no_holder() which describes its function more clearly. Signed-off-by:
-
Mikulas Patocka authored
track_chunk is always called with interrupts enabled. Consequently, we do not need to save and restore interrupt state in "flags" variable. This patch changes spin_lock_irqsave to spin_lock_irq and spin_unlock_irqrestore to spin_unlock_irq. Signed-off-by:
-
Mikulas Patocka authored
Use a defined macro DM_ENDIO_INCOMPLETE instead of a numeric constant. Signed-off-by:
-
Mikulas Patocka authored
mempool_alloc can't fail if __GFP_WAIT is specified, so the condition that tests if read_record is non-NULL is always true. Signed-off-by:
-
Mike Snitzer authored
If "ignore_discard" is specified when creating the thin pool device then discard support is disabled for that device. The pool device's status should reflect this fact rather than stating "no_discard_passdown" (which implies discards are enabled but passdown is disabled). Reported-by:
Zdenek Kabelac <zkabelac@redhat.com> Signed-off-by:
-
Joe Thornber authored
When deleting nested btrees, the code forgets to delete the innermost btree. The thin-metadata code serendipitously compensates for this by claiming there is one extra layer in the tree. This patch corrects both problems. Signed-off-by:
-
Joe Thornber authored
When discards are prepared it is best to directly wake the worker that will process them. The worker will be woken anyway, via periodic commit, but there is no reason to not wake_worker here. Signed-off-by:
-
