- 30 May, 2014 1 commit
-
-
Paul Bolle authored
Checks for CONFIG_BCM_CS4297A_CSWARM were added in v2.6.11. The related Kconfig symbol was never added so these checks always evaluated to true. Remove them. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 29 May, 2014 5 commits
-
-
Hui Wang authored
Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
Hui Wang authored
Signed-off-by:
-
Hui Wang authored
This reverts commit c687200b. Dropping the def association and sequence from pinconf comparing is a bit risky, It will introduce a greater risk of catching unwanted machines. And in addition, so far no BIOS experts give us an explicit answer whether it makes senses to compare these two fields or not. For safety reason, we revert this commit. Signed-off-by:
-
Dan Carpenter authored
There was a typo here so we return directly instead of freeing "hwinfo". Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewd-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Tested-by:
-
Dan Carpenter authored
We checked "err" earlier. These things seem to be left over code. Signed-off-by:
-
- 28 May, 2014 1 commit
-
-
Benoit Taine authored
This issue was reported by coccicheck using the semantic patch at scripts/coccinelle/api/resource_size.cocci Signed-off-by:
Benoit Taine <benoit.taine@lip6.fr> Signed-off-by:
-
- 27 May, 2014 15 commits
-
-
Takashi Iwai authored
This is a merge of big firewire audio stack updates by Takashi Sakamoto.
-
Takashi Sakamoto authored
Currently bebob driver apply Raw Audio Data channel (in IEC 61883-1:2002, Multi Bit Linear Audio Data channel in IEC 61883-6:20005) to IEC 60958 Conformant Data channel because both fireworks and bebob based devices can handle it by ignoring each label. This patch improves a comment about this. Signed-off-by:
-
Takashi Sakamoto authored
Currently mutex_unlock() is called in module's cleanup function. But after cleaned up, this mutex is automatically released. So this function call is meaningless. Signed-off-by:
-
Takashi Sakamoto authored
Some variables were declared without static even if they're not referred to from external files. This commit make them local symbols for better information-hiding by file unit. Signed-off-by:
-
Takashi Sakamoto authored
To suppress 'sparse' warning. Signed-off-by:
-
Takashi Sakamoto authored
According to coding rule. Signed-off-by:
-
Takashi Sakamoto authored
This commit adds suffix to register values of each device, to supress 'sparse' warnings. Additionally, this commit changes offset values with integer literal. Signed-off-by:
-
Takashi Sakamoto authored
The second argument of snd_efw_command_get_sampling_rate() means sampling rate and its type is 'unsigned int'. But 'int' variable is passed as parameter. It's better to apply the same type for the variable as its argument. Similally, the type of variable for snd_efw_command_get_clock_source() and avc_bridgeco_get_plug_type() should be the same type as each argument. Signed-off-by:
-
Takashi Sakamoto authored
Originally, I intent to this argument given with 'struct snd_pcm_runtime.rate' or params_rate(). They return value of 'unsigned int'. So 'unsigned int' is better for the type of this argument. Signed-off-by:
-
Takashi Sakamoto authored
There are two modes for Fireworks, IEC 61883 compliant or Windows. So it's better to use enum type instead of int to express the intension, even if C language specification defines to handle enum variables as usual integer. Signed-off-by:
-
Takashi Sakamoto authored
The return value of memdup_user() should be passed to return correct error. Signed-off-by:
-
Takashi Sakamoto authored
__be32 value should not be assigned directly to bool value. Signed-off-by:
-
Takashi Sakamoto authored
This commit fixes a big for loop count with array. The limitation of loop count should be calcurated with the number of elements in the array, not with the number of bytes. Aditionally, this commit apply the same declaration as a prototype in header for the array. Signed-off-by:
-
Fabian Frederick authored
'texts' is only used as source in strcpy Signed-off-by:
Fabian Frederick <fabf@skynet.be> Signed-off-by:
-
Arnd Bergmann authored
When CONFIG_PM is disabled, the CONFIG_SND_HDA_POWER_SAVE_DEFAULT symbol does not get defined, which causes a build error for the hda-tegra driver: hda/hda_tegra.c:80:25: error: 'CONFIG_SND_HDA_POWER_SAVE_DEFAULT' undeclared here (not in a function) static int power_save = CONFIG_SND_HDA_POWER_SAVE_DEFAULT; ^ /git/arm-soc/sound/pci/hda/hda_tegra.c:235:13: warning: 'hda_tegra_disable_clocks' defined but not used [-Wunused-function] static void hda_tegra_disable_clocks(struct hda_tegra *data) ^ This works around the problem by not referencing that macro when CONFIG_PM is disabled. Instead, we assume that it's disabled unconditionally and cannot be enabled at runtime. Signed-off-by:Arnd Bergmann <arnd@arndb.de> Cc: Dylan Reid <dgreid@chromium.org> Cc: Stephen Warren <swarren@nvidia.com> Signed-off-by:
-
- 26 May, 2014 18 commits
-
-
Gabriele Mazzotta authored
When headphones are plugged in, force AFG and node 0x02 ("Headphone Playback Volume") to D0 to avoid pop noises. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=76611Signed-off-by:Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by:
-
Takashi Sakamoto authored
In post commit, a quirk of this firmware about transactions is reported. This commit apply a workaround for this quirk. They often fail transactions due to gap_count mismatch. This state is changed by generating bus reset. The fw_schedule_bus_reset() is an exported symbol in firewire-core. But there are no header for public. This commit moves its prototype from drivers/firewire/core.h to include/linux/firewire.h. This mismatch still affects bus management before generating this bus reset. It still takes a time to call driver's probe() because transactions are still often failed. Signed-off-by:
-
Takashi Sakamoto authored
Just powering on, these devices below wait to download firmware. - Firewire Audiophile - Firewire 410 - Firewire 1814 - ProjectMix I/O But firmware version 5058 or later, flash memory in the device stores the firmware. So this driver can enable these devices by sending a certain cue to load the firmware. Signed-off-by:
-
Takashi Sakamoto authored
The firmwares for M-Audio Firewire 410/1814 and ProjectMix I/O has a quirk to ignore MIDI messages in data blocks more than 8. This commit uses a flag which Fireworks uses for a similar quirk. Signed-off-by:
-
Takashi Sakamoto authored
ALSA: bebob/firewire-lib: Add a quirk of wrong dbc in empty packet for M-Audio special Firewire series M-Audio Firewire 1814 has a quirk, ProjectMix I/O also has. They transmit empty packet with wrong value of dbc incremented by 8 at high sampling rate. According to IEC 61883-1, this value should be the same as the one in previous packet. This commit adds a flag named as CIP_EMPTY_HAS_WRONG_DBC. With flag, the value of dbc in empty packet is overwittern by an expected value. This is an example of this quirk: CIP Header 0 CIP Header 1 Payload size 010D0000 9004F759 210 010D0010 90040B59 210 010D0020 90042359 210 01020028 9004FFFF 2 <- 010D0030 90043759 210 010D0040 90044B59 210 010D0050 90046359 210 01020058 9004FFFF 2 <- 010D0060 90047759 210 010D0070 90048B59 210 010D0080 9004A359 210 01020088 9004FFFF 2 <- 010D0090 9004B759 210 010D00A0 9004CB59 210 010D00B0 9004E359 210 010200B8 9004FFFF 2 <- 010D00C0 9004F759 210 010D00D0 90040B59 210 010D00E0 90042359 210 Signed-off-by:
-
Takashi Sakamoto authored
This commit allows this driver to support some models which M-Audio produces with DM1000 but its firmware is special. They are: - Firewire 1814 - ProjectMix I/O They have heavily customized firmware. The usual operations can't be applied to them. For this reason, this commit adds a model specific member to 'struct snd_bebob' and some model specific functions. Some parameters are write-only so this commit also adds control interface for applications to set them. M-Audio special firmware quirks: - Just after powering on, they wait to download firmware. This state is changed when receiving cue. Then bus reset is generated and the device is recognized as a different model with the uploaded firmware. - They don't respond against BridgeCo AV/C extension commands. So drivers can't get their stream formations and so on. - They do not start to transmit packets only by establishing connection but also by receiving SIGNAL FORMAT command. - After booting up, they often fail to send response against driver's request due to mismatch of gap_count. This module don't support to upload firmware. Tested-by: Darren Anderson <darrena092@gmail.com> (ProjectMix I/O) Signed-off-by:
-
Takashi Sakamoto authored
This commit allows this driver to support some models which M-Audio produces with DM1000/DM1000E with usual firmware. They are: - Firewire 410 - Firewire AudioPhile - Firewire Solo - Ozonic - NRV10 - FirewireLightBridge According to a person who worked in BridgeCo, some models are produced with 'Pre-BeBoB'. This means that these products were released before BeBoB was officially produced, and later BeBoB specification was formed. So these models have some quirks. M-Audio usual firmware quirks: - Just after powering on, 'Firewire 410' waits to download firmware. This state is changed when receiving cue. Then bus reset is generated and the device is recognized as a different model with the uploaded firmware. - 'Firewire Audiophile' also waits to download firmware but its vendor id/model id is the same as the one after loading firmware. - The information of channel mapping for MIDI conformant data channel is invalid against BridgeCo specification. This commit adds some codes for these quirks but don't support to upload firmware. This commit also adds specific operations to get metering information. The metering information also includes status of clock synchronization if the model supports to switch source of clock. The specification of FirewireLightBridge is unknown. So in this time, normal operations are applied for this model. Signed-off-by:
-
Takashi Sakamoto authored
This commit allows this driver to support all of models which Focusrite produces with DM1000/BeBoB. They are: - Saffire - Saffire LE - SaffirePro 10 I/O - SaffirePro 26 I/O This commit adds Focusrite specific operations: 1. Get source of clock 2. Get/Set sampling frequency 3. Get metering information The driver uses these functionalities to read/write specific address by async transaction. Signed-off-by:
-
Takashi Sakamoto authored
This commit allows this driver to support all of models which Yamaha produced with DM1000/BeBoB. They are: - GO44 - GO46 This commit adds Yamaha specific operations. To get source of clock, AV/C Audio Subunit command is used. I note that their appearances are similar to some models of TerraTec; 'Go44' is similar to 'PHASE 24 FW' and 'GO46' is similar to 'PHASE X24 FW'. But their combination of Audio/Music subunits is a bit different. Signed-off-by:
-
Takashi Sakamoto authored
This commit allows this driver to support all of models which Terratec produced with DM1000/BeBoB. They are: - PHASE 24 FW - PHASE X24 FW - PHASE 88 Rack FW - EWS MIC2 - EWS MIC4 - Aureon 7.1 Firewire For Phase series, this commit adds a Terratec specific operation. To get source of clock. AV/C Audio Subunit command is used. For EWS series and Aureon, this module uses normal operations. Tested-by: Maximilian Engelhardt <maxi@daemonizer.de> (PHASE 24 FW) Signed-off-by:
-
Takashi Sakamoto authored
This commit is for some devices which have its own operations or quirks. Many functionality should be implemented in user land. Then this commit adds functionality related to stream such as sampling frequency or clock source. For help to debug, this commit adds the functionality to get metering information if it's available. To help these functionalities, this commit adds some AV/C commands defined in 'AV/C Audio Subunit Specification (1394TA). Signed-off-by:
-
Takashi Sakamoto authored
This interface is designed for mixer/control application. By using hwdep interface, the application can get information about firewire node, can lock/unlock kernel streaming and can get notification at starting/stopping kernel streaming. Signed-off-by:
-
Takashi Sakamoto authored
This commit adds a functionality to capture/playback PCM samples. When AMDTP stream is already running for PCM or the source of clock is not internal, available sampling rate is limited at current one. Signed-off-by:
-
Takashi Sakamoto authored
This commit adds a functionality to capture/playback MIDI messages. When no AMDTP streams are running, this module starts AMDTP stream at current sampling rate for MIDI substream. Signed-off-by:
-
Takashi Sakamoto authored
This commit adds proc interface to get these information for debugging: - firmware information - stream formation - current clock source and sampling rate Signed-off-by:
-
Takashi Sakamoto authored
Normal BeBoB firmware has a quirk. When receiving bus reset, it transmits packets with discontinuous value in dbc field. This causes two situation, one is to abort streaming by firewire-lib as a result of detecting the discontinuity. Another is to call driver's .update() because of bus reset. These two is generated independently. (The former depends on isochronous stream and the latter depends on IEEE1394 bus driver.) When BeBoB driver works with XRUN-recoverable applications, this situation looks like stream_start_duplex() call followed by stream_update_duplex() call because applications will call snd_pcm_prepare() immediately at XRUN. To update connections and streams at first, this commit use completion. When queueing error occurs, stream_start_duplex() is forced to wait maximum 1000msec. During this, when .update() is called, the completion is waken and stream_start_duplex() is processed without breaking connections. At bus reset, stream_start_duplex() shouldn't break/establish connections and stream_update_duplex() should update connections because a caller of fw_iso_resources_allocate() is responsible for calling fw_iso_resources_update() on bus reset. This commit also adds a flag, which has an effect to skip checking continuity for first packet. This flag is useful for BeBoB quirk to start handling packets during streaming. Signed-off-by:
-
Takashi Sakamoto authored
This commit adds management functionality for connections and streams. BeBoB uses CMP to manage connections and uses AMDTP for streams. This commit also adds some BridgeCo's AV/C extension commands. There are some BridgeCo's AV/C extension commands but this commit just uses below commands to get device's capability and status: 1.Extended Plug Info commands - Plug Channel Position Specific Data - Plug Type Specific Data - Cluster(Section) Info Specific Data - Plug Input Specific Data 2.Extended Stream Format Information commands - Extended Stream Format Information Command - List Request For Extended Plug Info commands for Cluster Info Specific Data, I pick up 'section' instead of 'cluster' from document to prevent from misunderstanding because 'cluster' is also used in IEC 61883-6. Signed-off-by:
-
Takashi Sakamoto authored
This commit adds a new driver for BeBoB based devices with no specific operations. Currently this driver just create/remove card instance according to callbacks. BeBoB is 'BridgeCo enhanced Breakout Box'. This is installed to firewire devices with DM1000/DM1100/DM1500 chipset. It gives common way for host system to handle BeBoB based devices. Current supported devices: - Edirol FA-66/FA-101 - PreSonus FIREBOX/FIREPOD/FP10/Inspire1394 - BridgeCo RDAudio1/Audio5 - Mackie Onyx 1220/1620/1640 (Firewire I/O Card) - Mackie d.2 (Firewire Option) - Stanton FinalScratch 2 (ScratchAmp) - Tascam IF-FW DM - Behringer XENIX UFX 1204/1604 - Behringer Digital Mixer X32 series (X-UF Card) - Apogee Rosetta 200/Rosetta 400 (X-FireWire card) - Apogee DA-16X/AD-16X/DD-16X (X-FireWire card) - Apogee Ensemble - ESI Quotafire610 - AcousticReality eARMasterOne - CME MatrixKFW - Phonix Helix Board 12 MkII/18 MkII/24 MkII - Phonic Helix Board 12 Universal/18 Universal/24 Universal - Lynx Aurora 8/16 (LT-FW) - ICON FireXon - PrismSound Orpheus/ADA-8XR Devices possible to be supported if identifying IDs: - Apogee Mini-Me Firewire/Mini-DAC Firewire - Behringer F-Control Audio 610/1616 - Cakewalk Sonar Power Studio 66 - CME UF400e - ESI Quotafire XL - Infrasonic DewX/Windy6 - Mackie Digital X Bus x.200/400 - Phonic Helix Board 12/18/24 - Phonic FireFly 202/302 - Rolf Spuler Firewire Guitar Tested-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
-
