- 30 Nov, 2017 40 commits
-
-
Dick Kennedy authored
commit 8e036a94 upstream. The driver is encountering oops in lpfc_sli_calc_ring. The driver is setting hba_wqidx for FCP based on the policy in use for NVME. The two may not be the same. Change to set the wqidx based on the FCP policy. Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <james.smart@broadcom.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dick Kennedy authored
commit 1234a6d5 upstream. The driver crashes when attempting to use a freed ndpl pointer. The pci_remove_one handler runs on a separate kernel thread. The order of the removal is starting by freeing all of the ndlps and then disabling interrupts. In between these two events the driver can still receive an ELS and process it. When it tries to use the ndlp pointer will be NULL Change the order of the pci_remove_one vs disable interrupts so that interrupts are disabled before the ndlp's are freed. Signed-off-by:
-
Dick Kennedy authored
commit 401bb416 upstream. During pci hot plug, the kernel crashes in a list_add_call The lookup by tag function will return null if the IOCB is out of range or does not have the on txcmplq flag set. Fix: Check for null return from lookup by tag. Signed-off-by:
-
Dick Kennedy authored
commit 1901762f upstream. During pci hot plug, the kernel crashes in timer management code. The sli4 remove_one handler is not stoping the timers as it starts to remove the port so that it can be swapped. Fix: Stop the timers early in the handler routine. Note: Fix in SLI-4 only. SLI-3 already stopped the timers properly. Signed-off-by:
-
Damien Le Moal authored
commit 4a109032 upstream. The three values starting at byte 8 of the Zoned Block Device Characteristics VPD page B6h are 32 bits values, not 64bits. So use get_unaligned_be32() to retrieve the values and not get_unaligned_be64() Fixes: 89d94756 ("sd: Implement support for ZBC devices") Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by:
Bart Van Assche <Bart.VanAssche@wdc.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Bart Van Assche authored
commit 86531887 upstream. Avoid that the following is reported while loading the qla2xxx kernel module: BUG: using smp_processor_id() in preemptible [00000000] code: modprobe/783 caller is debug_smp_processor_id+0x17/0x20 CPU: 7 PID: 783 Comm: modprobe Not tainted 4.14.0-rc8-dbg+ #2 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x8e/0xce check_preemption_disabled+0xe3/0xf0 debug_smp_processor_id+0x17/0x20 qla2x00_probe_one+0xf43/0x26c0 [qla2xxx] pci_device_probe+0xca/0x140 driver_probe_device+0x2e2/0x440 __driver_attach+0xa3/0xe0 bus_for_each_dev+0x5f/0x90 driver_attach+0x19/0x20 bus_add_driver+0x1c0/0x260 driver_register+0x5b/0xd0 __pci_register_driver+0x63/0x70 qla2x00_module_init+0x1d6/0x222 [qla2xxx] do_one_initcall+0x3c/0x163 do_init_module+0x55/0x1eb load_module+0x20a2/0x2890 SYSC_finit_module+0xd7/0xf0 SyS_finit_module+0x9/0x10 entry_SYSCALL_64_fastpath+0x23/0xc2 Fixes: commit 8abfa9e2 ("scsi: qla2xxx: Add function call to qpair for door bell") Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
-
Tuomas Tynkkynen authored
commit 9523feac upstream. Because userspace gets Very Unhappy when calls like stat() and execve() return -EINTR on 9p filesystem mounts. For instance, when bash is looking in PATH for things to execute and some SIGCHLD interrupts stat(), bash can throw a spurious 'command not found' since it doesn't retry the stat(). In practice, hitting the problem is rare and needs a really slow/bogged down 9p server. Signed-off-by:
Tuomas Tynkkynen <tuomas@tuxera.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Tuomas Tynkkynen authored
commit 8ee03163 upstream. Commit fd2421f5 ("fs/9p: When doing inode lookup compare qid details and inode mode bits.") transformed v9fs_qid_iget() to use iget5_locked() instead of iget_locked(). However, the test() callback is not checking fid.path at all, which means that a lookup in the inode cache can now accidentally locate a completely wrong inode from the same inode hash bucket if the other fields (qid.type and qid.version) match. Fixes: fd2421f5 ("fs/9p: When doing inode lookup compare qid details and inode mode bits.") Reviewed-by:
Latchesar Ionkov <lucho@ionkov.net> Signed-off-by:
-
Tuomas Tynkkynen authored
commit 61b272c3 upstream. Since commit c4fac910 ("9p: Implement show_options"), the mount options of 9p filesystems are printed out with some missing commas between the individual options: p9-scratch on /mnt/scratch type 9p (rw,dirsync,loose,access=clienttrans=virtio) Add them back. Fixes: c4fac910 ("9p: Implement show_options") Signed-off-by:
-
Al Viro authored
commit 11d49e9d upstream. we are advancing sg as we go, so the pages we need to drop in case of error are *before* the current sg. Signed-off-by:
-
Joakim Tjernlund authored
commit 07d70913 upstream. Avoton/Rangeley are based on Silvermount micro-architecture, like Bay Trail, and uses the INTEL_SPI_BYT method to drive SPI. Signed-off-by:
Joakim Tjernlund <joakim.tjernlund@infinera.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Maxime Ripard authored
commit 316b7758 upstream. While the current code was reporting to be able to work in master mode, it failed to do so because the BCLK divider wasn't programmed, meaning that the BCLK would run at the PLL's frequency no matter the sample rate. It was obviously a bit too fast. Add support to retrieve the divider to use, and set it. Since our PLL is not always able to generate a perfect multiple of the sample rate, we'll have to choose the closest divider that matches our setup. Fixes: 36c68493 ("ASoC: Add sun8i digital audio codec") Reviewed-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Maxime Ripard authored
commit 18c1bf35 upstream. Since its introduction, the codec had an inversion of the left and right channels. It turned out to be pretty simple as it appears that the codec doesn't have the same polarity on the LRCK signal than the I2S block. Fix this by inverting our bit value for the LRCK inversion. Fixes: 36c68493 ("ASoC: Add sun8i digital audio codec") Signed-off-by:
-
Maxime Ripard authored
commit 560bfe77 upstream. The current code had the condition backward when checking if the codec should be running in slave or master mode. Fix it, and make the comment a bit more readable. Fixes: 36c68493 ("ASoC: Add sun8i digital audio codec") Signed-off-by:
-
Kailang Yang authored
commit 2d7fe618 upstream. It maybe the typo for ALC700 support patch. To fix the bit value on this patch. Fixes: 6fbae35a ("ALSA: hda/realtek - Add support for new codecs ALC700/ALC701/ALC703") Signed-off-by:
Kailang Yang <kailang@realtek.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit d6c0615f upstream. The previous fix for addressing the breakage in vmaster slave initialization, commit a91d6612 ("ALSA: hda - Fix incorrect TLV callback check introduced during set_fs() removal"), introduced a new helper to process over each slave kctl. However, this helper passes only the original kctl, not the virtual slave kctl. As a result, HD-audio driver (which is the only user so far) couldn't initialize the slave correctly because it's trying to update the value directly with the original kctl, not with the mapped kctl. This patch fixes the situation again by passing both the mapped slaved and original slave kctls to the function. Luckily there is a single caller as of now, so changing the call signature is no big matter. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197959 Fixes: a91d6612 ("ALSA: hda - Fix incorrect TLV callback check introduced during set_fs() removal") Signed-off-by:
-
Takashi Iwai authored
commit c2432466 upstream. We got a regression report about the HD-audio HDMI chmap, where some surround channels are reported as UNKNOWN. The git bisection pointed the culprit at the commit 9b3dc8aa ("ALSA: hda - Register chmap obj as priv data instead of codec"). The story behind scene is like this: - While moving the code out of the legacy HDA to the HDA common place, the patch modifies the code to obtain the chmap array indirectly in a byte array, and it expands it to kctl value array. - At the latter operation, the size of the array is wrongly passed by sizeof() to the pointer. - It can be 4 on 32bit arch, thus too short for 6+ channels. (And that's the reason why it didn't hit other persons; it's 8 on 64bit arch, thus it's usually enough.) The code was further changed meanwhile, but the problem persisted. Let's fix it by correctly evaluating the array size. Fixes: 9b3dc8aa ("ALSA: hda - Register chmap obj as priv data instead of codec") Reported-by:
VDR User <user.vdr@gmail.com> Signed-off-by:
-
Kailang Yang authored
commit 3aabf94c upstream. Sound works after a cold boot but not after a reboot from windows. This patch will solve this issue. This is relation with Class-D power control. [ The bug was reported in Bugzilla below for Sony VAIO SVS13A1C5E -- tiwai] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197737Signed-off-by:
-
Takashi Iwai authored
commit 3d4e8303 upstream. Some timer compat ioctls have NULL checks of timer instance with snd_BUG_ON() that bring up WARN_ON() when the debug option is set. Actually the condition can be met in the normal situation and it's confusing and bad to spew kernel warnings with stack trace there. Let's remove snd_BUG_ON() invocation and replace with the simple checks. Also, correct the error code to EBADFD to follow the native ioctl error handling. Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Takashi Iwai authored
commit 0a62d6c9 upstream. The helper functions to parse and look for the clock source, selector and multiplier unit may return the descriptor with a too short length than required, while there is no sanity check in the caller side. Add some sanity checks in the parsers, at least, to guarantee the given descriptor size, for avoiding the potential crashes. Fixes: 79f920fb ("ALSA: usb-audio: parse clock topology of UAC2 devices") Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
Takashi Iwai authored
commit f658f17b upstream. The usb-audio driver may trigger an out-of-bound access at parsing a malformed selector unit, as it checks the header length only after evaluating bNrInPins field, which can be already above the given length. Fix it by adding the length check beforehand. Fixes: 99fc8645 ("ALSA: usb-mixer: parse descriptors with structs") Signed-off-by:
-
Takashi Iwai authored
commit d937cd67 upstream. When the usb-audio descriptor contains the malformed feature unit description with a too short length, the driver may access out-of-bounds. Add a sanity check of the header size at the beginning of parse_audio_feature_unit(). Fixes: 23caaf19 ("ALSA: usb-mixer: Add support for Audio Class v2.0") Reported-by:
-
Henrik Eriksson authored
commit 20e3f985 upstream. commit 3179f620 ("ALSA: core: add .get_time_info") had a side effect of changing the behaviour of the PCM runtime tstamp. Prior to this change tstamp was not updated by snd_pcm_update_hw_ptr0() unless the hw_ptr had moved, after this change tstamp was always updated. For an application using alsa-lib, doing snd_pcm_readi() followed by snd_pcm_status() to estimate the age of the read samples by subtracting status->avail * [sample rate] from status->tstamp this change degraded the accuracy of the estimate on devices where the pcm hw does not provide a granular hw_ptr, e.g., devices using soc-generic-dmaengine-pcm.c and a dma-engine with residue_granularity DMA_RESIDUE_GRANULARITY_DESCRIPTOR. The accuracy of the estimate depended on the latency between the PCM hw completing a period and the driver called snd_pcm_period_elapsed() to notify ALSA core, typically determined by interrupt handling latency. After the change the accuracy of the estimate depended on the latency between the PCM hw completing a period and the application calling snd_pcm_status(), determined by the scheduling of the application process. The maximum error of the estimate is one period length in both cases, but the error average and variance is smaller when it depends on interrupt latency. Instead of always updating tstamp, update it only if audio_tstamp changed. Fixes: 3179f620 ("ALSA: core: add .get_time_info") Suggested-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Henrik Eriksson <henrik.eriksson@axis.com> Signed-off-by:
-
Ross Zwisler authored
commit e9072d85 upstream. The current code has the potential for data corruption when changing an inode's journaling mode, as that can result in a subsequent unsafe change in S_DAX. I've captured an instance of this data corruption in the following fstest: https://patchwork.kernel.org/patch/9948377/ Prevent this data corruption from happening by disallowing changes to the journaling mode if the '-o dax' mount option was used. This means that for a given filesystem we could have a mix of inodes using either DAX or data journaling, but whatever state the inodes are in will be held for the duration of the mount. Signed-off-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Ross Zwisler authored
commit 559db4c6 upstream. If an inode has inline data it is currently prevented from using DAX by a check in ext4_set_inode_flags(). When the inode grows inline data via ext4_create_inline_data() or removes its inline data via ext4_destroy_inline_data_nolock(), the value of S_DAX can change. Currently these changes are unsafe because we don't hold off page faults and I/O, write back dirty radix tree entries and invalidate all mappings. There are also issues with mm-level races when changing the value of S_DAX, as well as issues with the VM_MIXEDMAP flag: https://www.spinics.net/lists/linux-xfs/msg09859.html The unsafe transition of S_DAX can reliably cause data corruption, as shown by the following fstest: https://patchwork.kernel.org/patch/9948381/ Fix this issue by preventing the DAX mount option from being used on filesystems that were created to support inline data. Inline data is an option given to mkfs.ext4. Signed-off-by:
-
Theodore Ts'o authored
commit 51e3ae81 upstream. If there are pending writes subject to delayed allocation, then i_size will show size after the writes have completed, while i_disksize contains the value of i_size on the disk (since the writes have not been persisted to disk). If fallocate(2) is called with the FALLOC_FL_KEEP_SIZE flag, either with or without the FALLOC_FL_ZERO_RANGE flag set, and the new size after the fallocate(2) is between i_size and i_disksize, then after a crash, if a journal commit has resulted in the changes made by the fallocate() call to be persisted after a crash, but the delayed allocation write has not resolved itself, i_size would not be updated, and this would cause the following e2fsck complaint: Inode 12, end of extent exceeds allowed value (logical block 33, physical block 33441, len 7) This can only take place on a sparse file, where the fallocate(2) call is allocating blocks in a range which is before a pending delayed allocation write which is extending i_size. Since this situation is quite rare, and the window in which the crash must take place is typically < 30 seconds, in practice this condition will rarely happen. Nevertheless, it can be triggered in testing, and in particular by xfstests generic/456. Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
-
Rameshwar Prasad Sahu authored
commit f1601113 upstream. When tracing ata link error event, the kernel crashes when the disk is removed due to NULL pointer access by trace_ata_eh_link_autopsy API. This occurs as the dev is NULL when the disk disappeared. This patch fixes this crash by calling trace_ata_eh_link_autopsy only if "dev" is not NULL. v2 changes: Removed direct passing "link" pointer instead of "dev" in trace API. Signed-off-by:
Rameshwar Prasad Sahu <rsahu@apm.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Fixes: 255c03d1 ("libata: Add tracepoints") Signed-off-by:
-
Miklos Szeredi authored
commit 9a31d7ad upstream. Blind increment of group's user_waits is not enough, we could be far enough in the group's destruction that it isn't taken into account (i.e. grabbing the mark ref afterwards doesn't guarantee that it was the ref coming from the _group_ that was grabbed). Instead we need to check (under lock) that the mark is still attached to the group after having obtained a ref to the mark. If not, skip it. Reviewed-by:
Miklos Szeredi <mszeredi@redhat.com> Fixes: 9385a84d ("fsnotify: Pass fsnotify_iter_info into handle_event handler") Signed-off-by:
-
Miklos Szeredi authored
commit 0d6ec079 upstream. We may fail to pin one of the marks in fsnotify_prepare_user_wait() when dropping the srcu read lock, resulting in use after free at the next iteration. Solution is to store both marks in iter_info instead of just the one we'll be sending the event for. Reviewed-by:
-
Miklos Szeredi authored
commit 24c20305 upstream. This patch doesn't actually fix any bug, just paves the way for fixing mark and group pinning. Reviewed-by:
-
Shaohua Li authored
commit 938b533d upstream. This reverts commit 8031c3dd. That patches doesn't work well if PAGE_SIZE > 4k. We will fix the original problem with a different approach. Fix: 8031c3dd(md/bitmap: copy correct data for bitmap super) Reported-by:
Joshua Kinard <kumba@gentoo.org> Suggested-by:
Neil Brown <neilb@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Loic Poulain authored
commit 6e518111 upstream. This patch implements the hdev setup function since wcnss-bt does not have persistent memory to store an allocated BD address. The device is therefore marked as unconfigured if no BD address has been previously retrieved. Signed-off-by:
Loic Poulain <loic.poulain@linaro.org> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Artur Paszkiewicz authored
commit b90f6ff0 upstream. Only MD_SB_CHANGE_PENDING should be used to wait for transition from clean to dirty. Checking also MD_SB_CHANGE_CLEAN is unnecessary and can race with e.g. md_do_sync(). This sporadically causes a hang when changing consistency policy during resync: INFO: task mdadm:6183 blocked for more than 30 seconds. Not tainted 4.14.0-rc3+ #391 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. mdadm D12752 6183 6022 0x00000000 Call Trace: __schedule+0x93f/0x990 schedule+0x6b/0x90 md_allow_write+0x100/0x130 [md_mod] ? do_wait_intr_irq+0x90/0x90 resize_stripes+0x3a/0x5b0 [raid456] ? kernfs_fop_write+0xbe/0x180 raid5_change_consistency_policy+0xa6/0x200 [raid456] consistency_policy_store+0x2e/0x70 [md_mod] md_attr_store+0x90/0xc0 [md_mod] sysfs_kf_write+0x42/0x50 kernfs_fop_write+0x119/0x180 __vfs_write+0x28/0x110 ? rcu_sync_lockdep_assert+0x12/0x60 ? __sb_start_write+0x15a/0x1c0 ? vfs_write+0xa3/0x1a0 vfs_write+0xb4/0x1a0 SyS_write+0x49/0xa0 entry_SYSCALL_64_fastpath+0x18/0xad Fixes: 2214c260 ("md: don't return -EAGAIN in md_allow_write for external metadata arrays") Signed-off-by:
Artur Paszkiewicz <artur.paszkiewicz@intel.com> Signed-off-by:
-
NeilBrown authored
commit d47c8ad2 upstream. A recent patch aimed to cause md_write_start() to fail (rather than block) when the mddev was suspending, so as to avoid deadlocks. Unfortunately the test in wait_event() was wrong, and it didn't change behaviour at all. We wait_event() must wait until the metadata is written OR the array is suspending. Fixes: cc27b0c7 ("md: fix deadlock between mddev_suspend() and md_write_start()") Reported-by:
Xiao Ni <xni@redhat.com> Signed-off-by:
-
Thomas Backlund authored
commit c2c48ddf upstream. iwlwifi 9000 and a0000 series hw contains an extra dash in firmware file name as seeen in modinfo output for kernel 4.14: firmware: iwlwifi-9260-th-b0-jf-b0--34.ucode firmware: iwlwifi-9260-th-a0-jf-a0--34.ucode firmware: iwlwifi-9000-pu-a0-jf-b0--34.ucode firmware: iwlwifi-9000-pu-a0-jf-a0--34.ucode firmware: iwlwifi-QuQnj-a0-hr-a0--34.ucode firmware: iwlwifi-QuQnj-a0-jf-b0--34.ucode firmware: iwlwifi-QuQnj-f0-hr-a0--34.ucode firmware: iwlwifi-Qu-a0-jf-b0--34.ucode firmware: iwlwifi-Qu-a0-hr-a0--34.ucode Fix that by dropping the extra adding of '"-"'. Signed-off-by:
Thomas Backlund <tmb@mageia.org> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Arnd Bergmann authored
commit 3f2a162f upstream. We set rtlhal->last_suspend_sec to an uninitialized stack variable, but unfortunately gcc never warned about this, I only found it while working on another patch. I opened a gcc bug for this. Presumably the value of rtlhal->last_suspend_sec is not all that important, but it does get used, so we probably want the patch backported to stable kernels. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82839Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Larry Finger authored
commit 519ce2f9 upstream. In routine rtl92ee_set_fw_rsvdpagepkt(), the driver allocates an skb, but never calls rtl_cmd_send_packet(), which will free the buffer. All other rtlwifi drivers perform this operation correctly. This problem has been in the driver since it was included in the kernel. Fortunately, each firmware load only leaks 4 buffers, which likely explains why it has not previously been detected. Signed-off-by:
-
Andrew Elble authored
commit 95da1b3a upstream. If a delegation has been revoked by the server, operations using that delegation should error out with NFS4ERR_DELEG_REVOKED in the >4.1 case, and NFS4ERR_BAD_STATEID otherwise. The server needs NFSv4.1 clients to explicitly free revoked delegations. If the server returns NFS4ERR_DELEG_REVOKED, the client will do that; otherwise it may just forget about the delegation and be unable to recover when it later sees SEQ4_STATUS_RECALLABLE_STATE_REVOKED set on a SEQUENCE reply. That can cause the Linux 4.1 client to loop in its stage manager. Signed-off-by:
Andrew Elble <aweits@rit.edu> Reviewed-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
NeilBrown authored
commit b688741c upstream. For correct close-to-open semantics, NFS must validate the change attribute of a directory (or file) on open. Since commit ecf3d1f1 ("vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op"), open() of "." or a path ending ".." is not revalidated reliably (except when that direct is a mount point). Prior to that commit, "." was revalidated using nfs_lookup_revalidate() which checks the LOOKUP_OPEN flag and forces revalidation if the flag is set. Since that commit, nfs_weak_revalidate() is used for NFSv3 (which ignores the flags) and nothing is used for NFSv4. This is fixed by using nfs_lookup_verify_inode() in nfs_weak_revalidate(). This does the revalidation exactly when needed. Also, add a definition of .d_weak_revalidate for NFSv4. The incorrect behavior is easily demonstrated by running "echo *" in some non-mountpoint NFS directory while watching network traffic. Without this patch, "echo *" sometimes doesn't produce any traffic. With the patch it always does. Fixes: ecf3d1f1 ("vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op") Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Anna Schumaker authored
commit 3944369d upstream. There isn't an obvious way to acquire and release the RCU lock during a tracepoint, so we can't use the rpc_peeraddr2str() function here. Instead, rely on the client's cl_hostname, which should have similar enough information without needing an rcu_dereference(). Reported-by:
Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
-
