- 11 Dec, 2012 31 commits
-
-
Mel Gorman authored
This is the simplest possible policy that still does something of note. When a pte_numa is faulted, it is moved immediately. Any replacement policy must at least do better than this and in all likelihood this policy regresses normal workloads. Signed-off-by:
Mel Gorman <mgorman@suse.de> Acked-by:
Rik van Riel <riel@redhat.com>
-
Mel Gorman authored
It is tricky to quantify the basic cost of automatic NUMA placement in a meaningful manner. This patch adds some vmstats that can be used as part of a basic costing model. u = basic unit = sizeof(void *) Ca = cost of struct page access = sizeof(struct page) / u Cpte = Cost PTE access = Ca Cupdate = Cost PTE update = (2 * Cpte) + (2 * Wlock) where Cpte is incurred twice for a read and a write and Wlock is a constant representing the cost of taking or releasing a lock Cnumahint = Cost of a minor page fault = some high constant e.g. 1000 Cpagerw = Cost to read or write a full page = Ca + PAGE_SIZE/u Ci = Cost of page isolation = Ca + Wi where Wi is a constant that should reflect the approximate cost of the locking operation Cpagecopy = Cpagerw + (Cpagerw * Wnuma) + Ci + (Ci * Wnuma) where Wnuma is the approximate NUMA factor. 1 is local. 1.2 would imply that remote accesses are 20% more expensive Balancing cost = Cpte * numa_pte_updates + Cnumahint * numa_hint_faults + Ci * numa_pages_migrated + Cpagecopy * numa_pages_migrated Note that numa_pages_migrated is used as a measure of how many pages were isolated even though it would miss pages that failed to migrate. A vmstat counter could have been added for it but the isolation cost is pretty marginal in comparison to the overall cost so it seemed overkill. The ideal way to measure automatic placement benefit would be to count the number of remote accesses versus local accesses and do something like benefit = (remote_accesses_before - remove_access_after) * Wnuma but the information is not readily available. As a workload converges, the expection would be that the number of remote numa hints would reduce to 0. convergence = numa_hint_faults_local / numa_hint_faults where this is measured for the last N number of numa hints recorded. When the workload is fully converged the value is 1. This can measure if the placement policy is converging and how fast it is doing it. Signed-off-by:
-
Peter Zijlstra authored
Add a 1 second delay before starting to scan the working set of a task and starting to balance it amongst nodes. [ note that before the constant per task WSS sampling rate patch the initial scan would happen much later still, in effect that patch caused this regression. ] The theory is that short-run tasks benefit very little from NUMA placement: they come and go, and they better stick to the node they were started on. As tasks mature and rebalance to other CPUs and nodes, so does their NUMA placement have to change and so does it start to matter more and more. In practice this change fixes an observable kbuild regression: # [ a perf stat --null --repeat 10 test of ten bzImage builds to /dev/shm ] !NUMA: 45.291088843 seconds time elapsed ( +- 0.40% ) 45.154231752 seconds time elapsed ( +- 0.36% ) +NUMA, no slow start: 46.172308123 seconds time elapsed ( +- 0.30% ) 46.343168745 seconds time elapsed ( +- 0.25% ) +NUMA, 1 sec slow start: 45.224189155 seconds time elapsed ( +- 0.25% ) 45.160866532 seconds time elapsed ( +- 0.17% ) and it also fixes an observable perf bench (hackbench) regression: # perf stat --null --repeat 10 perf bench sched messaging -NUMA: -NUMA: 0.246225691 seconds time elapsed ( +- 1.31% ) +NUMA no slow start: 0.252620063 seconds time elapsed ( +- 1.13% ) +NUMA 1sec delay: 0.248076230 seconds time elapsed ( +- 1.35% ) The implementation is simple and straightforward, most of the patch deals with adding the /proc/sys/kernel/numa_balancing_scan_delay_ms tunable knob. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> [ Wrote the changelog, ran measurements, tuned the default. ] Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Mel Gorman authored
By accounting against the present PTEs, scanning speed reflects the actual present (mapped) memory. Suggested-by:
-
Peter Zijlstra authored
Previously, to probe the working set of a task, we'd use a very simple and crude method: mark all of its address space PROT_NONE. That method has various (obvious) disadvantages: - it samples the working set at dissimilar rates, giving some tasks a sampling quality advantage over others. - creates performance problems for tasks with very large working sets - over-samples processes with large address spaces but which only very rarely execute Improve that method by keeping a rotating offset into the address space that marks the current position of the scan, and advance it by a constant rate (in a CPU cycles execution proportional manner). If the offset reaches the last mapped address of the mm then it then it starts over at the first address. The per-task nature of the working set sampling functionality in this tree allows such constant rate, per task, execution-weight proportional sampling of the working set, with an adaptive sampling interval/frequency that goes from once per 100ms up to just once per 8 seconds. The current sampling volume is 256 MB per interval. As tasks mature and converge their working set, so does the sampling rate slow down to just a trickle, 256 MB per 8 seconds of CPU time executed. This, beyond being adaptive, also rate-limits rarely executing systems and does not over-sample on overloaded systems. [ In AutoNUMA speak, this patch deals with the effective sampling rate of the 'hinting page fault'. AutoNUMA's scanning is currently rate-limited, but it is also fundamentally single-threaded, executing in the knuma_scand kernel thread, so the limit in AutoNUMA is global and does not scale up with the number of CPUs, nor does it scan tasks in an execution proportional manner. So the idea of rate-limiting the scanning was first implemented in the AutoNUMA tree via a global rate limit. This patch goes beyond that by implementing an execution rate proportional working set sampling rate that is not implemented via a single global scanning daemon. ] [ Dan Carpenter pointed out a possible NULL pointer dereference in the first version of this patch. ] Based-on-idea-by:
Andrea Arcangeli <aarcange@redhat.com> Bug-Found-By:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Peter Zijlstra authored
NOTE: This patch is based on "sched, numa, mm: Add fault driven placement and migration policy" but as it throws away all the policy to just leave a basic foundation I had to drop the signed-offs-by. This patch creates a bare-bones method for setting PTEs pte_numa in the context of the scheduler that when faulted later will be faulted onto the node the CPU is running on. In itself this does nothing useful but any placement policy will fundamentally depend on receiving hints on placement from fault context and doing something intelligent about it. Signed-off-by:
-
Mel Gorman authored
The use of MPOL_NOOP and MPOL_MF_LAZY to allow an application to explicitly request lazy migration is a good idea but the actual API has not been well reviewed and once released we have to support it. For now this patch prevents an application using the services. This will need to be revisited. Signed-off-by: -
Mel Gorman authored
This patch converts change_prot_numa() to use change_protection(). As pte_numa and friends check the PTE bits directly it is necessary for change_protection() to use pmd_mknuma(). Hence the required modifications to change_protection() are a little clumsy but the end result is that most of the numa page table helpers are just one or two instructions. Signed-off-by: -
Lee Schermerhorn authored
NOTE: Once again there is a lot of patch stealing and the end result is sufficiently different that I had to drop the signed-offs. Will re-add if the original authors are ok with that. This patch adds another mbind() flag to request "lazy migration". The flag, MPOL_MF_LAZY, modifies MPOL_MF_MOVE* such that the selected pages are marked PROT_NONE. The pages will be migrated in the fault path on "first touch", if the policy dictates at that time. "Lazy Migration" will allow testing of migrate-on-fault via mbind(). Also allows applications to specify that only subsequently touched pages be migrated to obey new policy, instead of all pages in range. This can be useful for multi-threaded applications working on a large shared data area that is initialized by an initial thread resulting in all pages on one [or a few, if overflowed] nodes. After PROT_NONE, the pages in regions assigned to the worker threads will be automatically migrated local to the threads on 1st touch. Signed-off-by:
-
Mel Gorman authored
Note: Based on "mm/mpol: Use special PROT_NONE to migrate pages" but sufficiently different that the signed-off-bys were dropped Combine our previous _PAGE_NUMA, mpol_misplaced and migrate_misplaced_page() pieces into an effective migrate on fault scheme. Note that (on x86) we rely on PROT_NONE pages being !present and avoid the TLB flush from try_to_unmap(TTU_MIGRATION). This greatly improves the page-migration performance. Based-on-work-by:
-
Mel Gorman authored
If we have to avoid migrating to a node that is nearly full, put page and return zero. Signed-off-by:
Hillf Danton <dhillf@gmail.com> Signed-off-by:
-
Peter Zijlstra authored
Note: This was originally based on Peter's patch "mm/migrate: Introduce migrate_misplaced_page()" but borrows extremely heavily from Andrea's "autonuma: memory follows CPU algorithm and task/mm_autonuma stats collection". The end result is barely recognisable so signed-offs had to be dropped. If original authors are ok with it, I'll re-add the signed-off-bys. Add migrate_misplaced_page() which deals with migrating pages from faults. Based-on-work-by:
Lee Schermerhorn <Lee.Schermerhorn@hp.com> Based-on-work-by:
-
Lee Schermerhorn authored
This patch provides a new function to test whether a page resides on a node that is appropriate for the mempolicy for the vma and address where the page is supposed to be mapped. This involves looking up the node where the page belongs. So, the function returns that node so that it may be used to allocated the page without consulting the policy again. A subsequent patch will call this function from the fault path. Because of this, I don't want to go ahead and allocate the page, e.g., via alloc_page_vma() only to have to free it if it has the correct policy. So, I just mimic the alloc_page_vma() node computation logic--sort of. Note: we could use this function to implement a MPOL_MF_STRICT behavior when migrating pages to match mbind() mempolicy--e.g., to ensure that pages in an interleaved range are reinterleaved rather than left where they are when they reside on any page in the interleave nodemask. Signed-off-by:
-
Lee Schermerhorn authored
This patch augments the MPOL_MF_LAZY feature by adding a "NOOP" policy to mbind(). When the NOOP policy is used with the 'MOVE and 'LAZY flags, mbind() will map the pages PROT_NONE so that they will be migrated on the next touch. This allows an application to prepare for a new phase of operation where different regions of shared storage will be assigned to worker threads, w/o changing policy. Note that we could just use "default" policy in this case. However, this also allows an application to request that pages be migrated, only if necessary, to follow any arbitrary policy that might currently apply to a range of pages, without knowing the policy, or without specifying multiple mbind()s for ranges with different policies. [ Bug in early version of mpol_parse_str() reported by Fengguang Wu. ] Bug-Reported-by:
Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Peter Zijlstra authored
Make MPOL_LOCAL a real and exposed policy such that applications that relied on the previous default behaviour can explicitly request it. Requested-by:
Christoph Lameter <cl@linux.com> Reviewed-by:
-
Mel Gorman authored
Note: This patch started as "mm/mpol: Create special PROT_NONE infrastructure" and preserves the basic idea but steals *very* heavily from "autonuma: numa hinting page faults entry points" for the actual fault handlers without the migration parts. The end result is barely recognisable as either patch so all Signed-off and Reviewed-bys are dropped. If Peter, Ingo and Andrea are ok with this version, I will re-add the signed-offs-by to reflect the history. In order to facilitate a lazy -- fault driven -- migration of pages, create a special transient PAGE_NUMA variant, we can then use the 'spurious' protection faults to drive our migrations from. The meaning of PAGE_NUMA depends on the architecture but on x86 it is effectively PROT_NONE. Actual PROT_NONE mappings will not generate these NUMA faults for the reason that the page fault code checks the permission on the VMA (and will throw a segmentation fault on actual PROT_NONE mappings), before it ever calls handle_mm_fault. [dhillf@gmail.com: Fix typo] Signed-off-by:
-
Andrea Arcangeli authored
When we split a transparent hugepage, transfer the NUMA type from the pmd to the pte if needed. Signed-off-by:
-
Andrea Arcangeli authored
Introduce FOLL_NUMA to tell follow_page to check pte/pmd_numa. get_user_pages must use FOLL_NUMA, and it's safe to do so because it always invokes handle_mm_fault and retries the follow_page later. KVM secondary MMU page faults will trigger the NUMA hinting page faults through gup_fast -> get_user_pages -> follow_page -> handle_mm_fault. Other follow_page callers like KSM should not use FOLL_NUMA, or they would fail to get the pages if they use follow_page instead of get_user_pages. [ This patch was picked up from the AutoNUMA tree. ] Originally-by:
-
Andrea Arcangeli authored
Implement pte_numa and pmd_numa. We must atomically set the numa bit and clear the present bit to define a pte_numa or pmd_numa. Once a pte or pmd has been set as pte_numa or pmd_numa, the next time a thread touches a virtual address in the corresponding virtual range, a NUMA hinting page fault will trigger. The NUMA hinting page fault will clear the NUMA bit and set the present bit again to resolve the page fault. The expectation is that a NUMA hinting page fault is used as part of a placement policy that decides if a page should remain on the current node or migrated to a different node. Acked-by:
-
Andrea Arcangeli authored
The objective of _PAGE_NUMA is to be able to trigger NUMA hinting page faults to identify the per NUMA node working set of the thread at runtime. Arming the NUMA hinting page fault mechanism works similarly to setting up a mprotect(PROT_NONE) virtual range: the present bit is cleared at the same time that _PAGE_NUMA is set, so when the fault triggers we can identify it as a NUMA hinting page fault. _PAGE_NUMA on x86 shares the same bit number of _PAGE_PROTNONE (but it could also use a different bitflag, it's up to the architecture to decide). It would be confusing to call the "NUMA hinting page faults" as "do_prot_none faults". They're different events and _PAGE_NUMA doesn't alter the semantics of mprotect(PROT_NONE) in any way. Sharing the same bitflag with _PAGE_PROTNONE in fact complicates things: it requires us to ensure the code paths executed by _PAGE_PROTNONE remains mutually exclusive to the code paths executed by _PAGE_NUMA at all times, to avoid _PAGE_NUMA and _PAGE_PROTNONE to step into each other toes. Because we want to be able to set this bitflag in any established pte or pmd (while clearing the present bit at the same time) without losing information, this bitflag must never be set when the pte and pmd are present, so the bitflag picked for _PAGE_NUMA usage, must not be used by the swap entry format. Signed-off-by:
-
Mel Gorman authored
Compaction already has tracepoints to count scanned and isolated pages but it requires that ftrace be enabled and if that information has to be written to disk then it can be disruptive. This patch adds vmstat counters for compaction called compact_migrate_scanned, compact_free_scanned and compact_isolated. With these counters, it is possible to define a basic cost model for compaction. This approximates of how much work compaction is doing and can be compared that with an oprofile showing TLB misses and see if the cost of compaction is being offset by THP for example. Minimally a compaction patch can be evaluated in terms of whether it increases or decreases cost. The basic cost model looks like this Fundamental unit u: a word sizeof(void *) Ca = cost of struct page access = sizeof(struct page) / u Cmc = Cost migrate page copy = (Ca + PAGE_SIZE/u) * 2 Cmf = Cost migrate failure = Ca * 2 Ci = Cost page isolation = (Ca + Wi) where Wi is a constant that should reflect the approximate cost of the locking operation. Csm = Cost migrate scanning = Ca Csf = Cost free scanning = Ca Overall cost = (Csm * compact_migrate_scanned) + (Csf * compact_free_scanned) + (Ci * compact_isolated) + (Cmc * pgmigrate_success) + (Cmf * pgmigrate_failed) Where the values are read from /proc/vmstat. This is very basic and ignores certain costs such as the allocation cost to do a migrate page copy but any improvement to the model would still use the same vmstat counters. Signed-off-by:
-
Mel Gorman authored
The pgmigrate_success and pgmigrate_fail vmstat counters tells the user about migration activity but not the type or the reason. This patch adds a tracepoint to identify the type of page migration and why the page is being migrated. Signed-off-by:
-
Mel Gorman authored
The compact_pages_moved and compact_pagemigrate_failed events are convenient for determining if compaction is active and to what degree migration is succeeding but it's at the wrong level. Other users of migration may also want to know if migration is working properly and this will be particularly true for any automated NUMA migration. This patch moves the counters down to migration with the new events called pgmigrate_success and pgmigrate_fail. The compact_blocks_moved counter is removed because while it was useful for debugging initially, it's worthless now as no meaningful conclusions can be drawn from its value. Signed-off-by:
-
Ingo Molnar authored
Reuse the NUMA code's 'modified page protections' count that change_protection() computes and skip the TLB flush if there's no changes to a range that sys_mprotect() modifies. Given that mprotect() already optimizes the same-flags case I expected this optimization to dominantly trigger on CONFIG_NUMA_BALANCING=y kernels - but even with that feature disabled it triggers rather often. There's two reasons for that: 1) While sys_mprotect() already optimizes the same-flag case: if (newflags == oldflags) { *pprev = vma; return 0; } and this test works in many cases, but it is too sharp in some others, where it differentiates between protection values that the underlying PTE format makes no distinction about, such as PROT_EXEC == PROT_READ on x86. 2) Even where the pte format over vma flag changes necessiates a modification of the pagetables, there might be no pagetables yet to modify: they might not be instantiated yet. During a regular desktop bootup this optimization hits a couple of hundred times. During a Java test I measured thousands of hits. So this optimization improves sys_mprotect() in general, not just CONFIG_NUMA_BALANCING=y kernels. [ We could further increase the efficiency of this optimization if change_pte_range() and change_huge_pmd() was a bit smarter about recognizing exact-same-value protection masks - when the hardware can do that safely. This would probably further speed up mprotect(). ] Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: -
Peter Zijlstra authored
This will be used for three kinds of purposes: - to optimize mprotect() - to speed up working set scanning for working set areas that have not been touched - to more accurately scan per real working set No change in functionality from this patch. Suggested-by:
-
Mel Gorman authored
With transparent hugepage support, handle_mm_fault() has to be careful that a normal PMD has been established before handling a PTE fault. To achieve this, it used __pte_alloc() directly instead of pte_alloc_map as pte_alloc_map is unsafe to run against a huge PMD. pte_offset_map() is called once it is known the PMD is safe. pte_alloc_map() is smart enough to check if a PTE is already present before calling __pte_alloc but this check was lost. As a consequence, PTEs may be allocated unnecessarily and the page table lock taken. Thi useless PTE does get cleaned up but it's a performance hit which is visible in page_test from aim9. This patch simply re-adds the check normally done by pte_alloc_map to check if the PTE needs to be allocated before taking the page table lock. The effect is noticable in page_test from aim9. AIM9 2.6.38-vanilla 2.6.38-checkptenone creat-clo 446.10 ( 0.00%) 424.47 (-5.10%) page_test 38.10 ( 0.00%) 42.04 ( 9.37%) brk_test 52.45 ( 0.00%) 51.57 (-1.71%) exec_test 382.00 ( 0.00%) 456.90 (16.39%) fork_test 60.11 ( 0.00%) 67.79 (11.34%) MMTests Statistics: duration Total Elapsed Time (seconds) 611.90 612.22 (While this affects 2.6.38, it is a performance rather than a functional bug and normally outside the rules -stable. While the big performance differences are to a microbench, the difference in fork and exec performance may be significant enough that -stable wants to consider the patch) Reported-by:Raz Ben Yehuda <raziebe@gmail.com> Signed-off-by:
-
Rik van Riel authored
If ptep_clear_flush() is called to clear a page table entry that is accessible anyway by the CPU, eg. a _PAGE_PROTNONE page table entry, there is no need to flush the TLB on remote CPUs. Signed-off-by:
-
Rik van Riel authored
We need pte_present to return true for _PAGE_PROTNONE pages, to indicate that the pte is associated with a page. However, for TLB flushing purposes, we would like to know whether the pte points to an actually accessible page. This allows us to skip remote TLB flushes for pages that are not actually accessible. Fill in this method for x86 and provide a safe (but slower) method on other architectures. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-66p11te4uj23gevgh4j987ip@git.kernel.org [ Added Linus's review fixes. ] Signed-off-by:
-
Rik van Riel authored
The function ptep_set_access_flags is only ever used to upgrade access permissions to a page. That means the only negative side effect of not flushing remote TLBs is that other CPUs may incur spurious page faults, if they happen to access the same address, and still have a PTE with the old permissions cached in their TLB. Having another CPU maybe incur a spurious page fault is faster than always incurring the cost of a remote TLB flush, so replace the remote TLB flush with a purely local one. This should be safe on every architecture that correctly implements flush_tlb_fix_spurious_fault() to actually invalidate the local TLB entry that caused a page fault, as well as on architectures where the hardware invalidates TLB entries that cause page faults. In the unlikely event that you are hitting what appears to be an infinite loop of page faults, and 'git bisect' took you to this changeset, your architecture needs to implement flush_tlb_fix_spurious_fault to actually flush the TLB entry. Signed-off-by: -
Rik van Riel authored
Intel has an architectural guarantee that the TLB entry causing a page fault gets invalidated automatically. This means we should be able to drop the local TLB invalidation. Because of the way other areas of the page fault code work, chances are good that all x86 CPUs do this. However, if someone somewhere has an x86 CPU that does not invalidate the TLB entry causing a page fault, this one-liner should be easy to revert. Signed-off-by: -
Rik van Riel authored
The function ptep_set_access_flags() is only ever invoked to set access flags or add write permission on a PTE. The write bit is only ever set together with the dirty bit. Because we only ever upgrade a PTE, it is safe to skip flushing entries on remote TLBs. The worst that can happen is a spurious page fault on other CPUs, which would flush that TLB entry. Lazily letting another CPU incur a spurious page fault occasionally is (much!) cheaper than aggressively flushing everybody else's TLB. Signed-off-by:
-
- 17 Nov, 2012 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fix from Marcelo Tosatti: "A correction for oops on module init with older Intel hosts." * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Fix invalid secondary exec controls in vmx_cpuid_update()
-
- 16 Nov, 2012 7 commits
-
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (12 patches) revert "mm: fix-up zone present pages" tmpfs: change final i_blocks BUG to WARNING tmpfs: fix shmem_getpage_gfp() VM_BUG_ON mm: highmem: don't treat PKMAP_ADDR(LAST_PKMAP) as a highmem address mm: revert "mm: vmscan: scale number of pages reclaimed by reclaim/compaction based on failures" rapidio: fix kernel-doc warnings swapfile: fix name leak in swapoff memcg: fix hotplugged memory zone oops mips, arc: fix build failure memcg: oom: fix totalpages calculation for memory.swappiness==0 mm: fix build warning for uninitialized value mm: add anon_vma_lock to validate_mm()
-
Andrew Morton authored
Revert commit 7f1290f2 ("mm: fix-up zone present pages") That patch tried to fix a issue when calculating zone->present_pages, but it caused a regression on 32bit systems with HIGHMEM. With that change, reset_zone_present_pages() resets all zone->present_pages to zero, and fixup_zone_present_pages() is called to recalculate zone->present_pages when the boot allocator frees core memory pages into buddy allocator. Because highmem pages are not freed by bootmem allocator, all highmem zones' present_pages becomes zero. Various options for improving the situation are being discussed but for now, let's return to the 3.6 code. Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Petr Tesarik <ptesarik@suse.cz> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by:
David Rientjes <rientjes@google.com> Tested-by:
Chris Clayton <chris2553@googlemail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Hugh Dickins authored
Under a particular load on one machine, I have hit shmem_evict_inode()'s BUG_ON(inode->i_blocks), enough times to narrow it down to a particular race between swapout and eviction. It comes from the "if (freed > 0)" asymmetry in shmem_recalc_inode(), and the lack of coherent locking between mapping's nrpages and shmem's swapped count. There's a window in shmem_writepage(), between lowering nrpages in shmem_delete_from_page_cache() and then raising swapped count, when the freed count appears to be +1 when it should be 0, and then the asymmetry stops it from being corrected with -1 before hitting the BUG. One answer is coherent locking: using tree_lock throughout, without info->lock; reasonable, but the raw_spin_lock in percpu_counter_add() on used_blocks makes that messier than expected. Another answer may be a further effort to eliminate the weird shmem_recalc_inode() altogether, but previous attempts at that failed. So far undecided, but for now change the BUG_ON to WARN_ON: in usual circumstances it remains a useful consistency check. Signed-off-by:
Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Hugh Dickins authored
Fuzzing with trinity hit the "impossible" VM_BUG_ON(error) (which Fedora has converted to WARNING) in shmem_getpage_gfp(): WARNING: at mm/shmem.c:1151 shmem_getpage_gfp+0xa5c/0xa70() Pid: 29795, comm: trinity-child4 Not tainted 3.7.0-rc2+ #49 Call Trace: warn_slowpath_common+0x7f/0xc0 warn_slowpath_null+0x1a/0x20 shmem_getpage_gfp+0xa5c/0xa70 shmem_fault+0x4f/0xa0 __do_fault+0x71/0x5c0 handle_pte_fault+0x97/0xae0 handle_mm_fault+0x289/0x350 __do_page_fault+0x18e/0x530 do_page_fault+0x2b/0x50 page_fault+0x28/0x30 tracesys+0xe1/0xe6 Thanks to Johannes for pointing to truncation: free_swap_and_cache() only does a trylock on the page, so the page lock we've held since before confirming swap is not enough to protect against truncation. What cleanup is needed in this case? Just delete_from_swap_cache(), which takes care of the memcg uncharge. Signed-off-by:Dave Jones <davej@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Will Deacon authored
kmap_to_page returns the corresponding struct page for a virtual address of an arbitrary mapping. This works by checking whether the address falls in the pkmap region and using the pkmap page tables instead of the linear mapping if appropriate. Unfortunately, the bounds checking means that PKMAP_ADDR(LAST_PKMAP) is incorrectly treated as a highmem address and we can end up walking off the end of pkmap_page_table and subsequently passing junk to pte_page. This patch fixes the bound check to stay within the pkmap tables. Signed-off-by:
Will Deacon <will.deacon@arm.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by:
-
Mel Gorman authored
Jiri Slaby reported the following: (It's an effective revert of "mm: vmscan: scale number of pages reclaimed by reclaim/compaction based on failures".) Given kswapd had hours of runtime in ps/top output yesterday in the morning and after the revert it's now 2 minutes in sum for the last 24h, I would say, it's gone. The intention of the patch in question was to compensate for the loss of lumpy reclaim. Part of the reason lumpy reclaim worked is because it aggressively reclaimed pages and this patch was meant to be a sane compromise. When compaction fails, it gets deferred and both compaction and reclaim/compaction is deferred avoid excessive reclaim. However, since commit c6543459 ("mm: remove __GFP_NO_KSWAPD"), kswapd is woken up each time and continues reclaiming which was not taken into account when the patch was developed. Attempts to address the problem ended up just changing the shape of the problem instead of fixing it. The release window gets closer and while a THP allocation failing is not a major problem, kswapd chewing up a lot of CPU is. This patch reverts commit 83fde0f2 ("mm: vmscan: scale number of pages reclaimed by reclaim/compaction based on failures") and will be revisited in the future. Signed-off-by:
Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Johannes Hirte <johannes.hirte@fem.tu-ilmenau.de> Signed-off-by:
-
Randy Dunlap authored
Fix rapidio kernel-doc warnings: Warning(drivers/rapidio/rio.c:415): No description found for parameter 'local' Warning(drivers/rapidio/rio.c:415): Excess function parameter 'lstart' description in 'rio_map_inb_region' Warning(include/linux/rio.h:290): No description found for parameter 'switches' Warning(include/linux/rio.h:290): No description found for parameter 'destid_table' Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Matt Porter <mporter@kernel.crashing.org> Acked-by:
Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by:
-
