- 14 Apr, 2014 38 commits
-
-
Will Deacon authored
commit acfdd4b1 upstream. a.out support on ARM requires that argc, argv and envp are passed in r0-r2 respectively, which requires hacking load_aout_binary to prevent argc being clobbered by the return code. Whilst mainline kernels do set the registers up in start_thread, the aout loader has never carried the hack in mainline. Initialising the registers in this way actually goes against the libc expectations for ELF binaries, where argc, argv and envp are passed on the stack, with r0 being used to hold a pointer to an exit function for cleaning up after the dynamic linker if required. If the pointer is NULL, then it is ignored. When execing an ELF binary, Linux currently zeroes r0, then sets it to argc and then finally clobbers it with the return value of the execve syscall, so we actually end up with: r0 = 0 stack[0] = argc r1 = stack[1] = argv r2 = stack[2] = envp libc treats r1 and r2 as undefined. The clobbering of r0 by sys_execve works for user-spawned threads, but when executing an ELF binary from a kernel thread (via call_usermodehelper), the execve is performed on the ret_from_fork path, which restores r0 from the saved pt_regs, resulting in argc being presented to the C library. This has horrible consequences when the application exits, since we have an exit function registered using argc, resulting in a jump to hyperspace. This patch solves the problem by removing the partial a.out support from arch/arm/ altogether. Cc: Ashish Sangwan <ashishsangwan2@gmail.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> [bwh: Backported to 3.2: - Adjust context - Adjust uapi filename] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> [yangyl: Backported to 3.4: Adjust context] Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nicolas Pitre authored
commit 6f16f499 upstream. We currently use a temporary 1MB section aligned to a 1MB boundary for mapping the provided device tree until the final page table is created. However, if the device tree happens to cross that 1MB boundary, the end of it remains unmapped and the kernel crashes when it attempts to access it. Given no restriction on the location of that DTB, it could end up with only a few bytes mapped at the end of a section. Solve this issue by mapping two consecutive sections. Signed-off-by:
Nicolas Pitre <nico@linaro.org> Tested-by:
Sascha Hauer <s.hauer@pengutronix.de> Tested-by:
Tomasz Figa <t.figa@samsung.com> Signed-off-by:
-
Arnaud Patard (Rtp) authored
commit 58569aee upstream. The mv643xx ethernet controller limits the packet size for the TX checksum offloading. This patch sets this limits for Kirkwood and Dove which have smaller limits that the default. As a side note, this patch is an updated version of a patch sent some years ago: http://lists.infradead.org/pipermail/linux-arm-kernel/2010-June/017320.html which seems to have been lost. Signed-off-by:
Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by:
Jason Cooper <jason@lakedaemon.net> [bwh: Backported to 3.2: adjust for the extra two parameters of orion_ge0{0,1}_init()] Signed-off-by:
-
Sergei Ianovich authored
commit ff88b472 upstream. Erratum 71 of PXA270M Processor Family Specification Update (April 19, 2010) explains that watchdog reset time is just 8us insead of 10ms in EMTS. If SDRAM is not reset, it causes memory bus congestion and the device hangs. We put SDRAM in selfresh mode before watchdog reset, removing potential freezes. Without this patch PXA270-based ICP DAS LP-8x4x hangs after up to 40 reboots. With this patch it has successfully rebooted 500 times. Signed-off-by:
Sergei Ianovich <ynvich@gmail.com> Tested-by:
Marek Vasut <marex@denx.de> Signed-off-by:
Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by:
Olof Johansson <olof@lixom.net> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Russell King authored
commit 43659222 upstream. It's no good setting vga_base after the VGA console has been initialised, because if we do that we get this: Unable to handle kernel paging request at virtual address 000b8000 pgd = c0004000 [000b8000] *pgd=07ffc831, *pte=00000000, *ppte=00000000 0Internal error: Oops: 5017 [#1] ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 3.12.0+ #49 task: c03e2974 ti: c03d8000 task.ti: c03d8000 PC is at vgacon_startup+0x258/0x39c LR is at request_resource+0x10/0x1c pc : [<c01725d0>] lr : [<c0022b50>] psr: 60000053 sp : c03d9f68 ip : 000b8000 fp : c03d9f8c r10: 000055aa r9 : 4401a103 r8 : ffffaa55 r7 : c03e357c r6 : c051b460 r5 : 000000ff r4 : 000c0000 r3 : 000b8000 r2 : c03e0514 r1 : 00000000 r0 : c0304971 Flags: nZCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment kernel which is an access to the 0xb8000 without the PCI offset required to make it work. Fixes: cc22b4c1 ("ARM: set vga memory base at run-time") Signed-off-by:
-
Arnd Bergmann authored
commit da94a829 upstream. In August 2012, Matthew Gretton-Dann checked a change into binutils labelled "Error on obsolete & warn on deprecated registers", apparently as part of ARMv8 support. Apparently, this was supposed to emit the message "Warning: This coprocessor register access is deprecated in ARMv8" when using certain mcr/mrc instructions and building for ARMv8. Unfortunately, the message that is actually emitted appears to be '(null)', which is less helpful in comparison. Even more unfortunately, this is biting us on every single kernel build with a new gas, because arch/arm/boot/compressed/head.S and some other files in that directory are built with -march=all since kernel commit 80cec14a "[ARM] Add -march=all to assembly file build in arch/arm/boot/compressed" back in v2.6.28. This patch reverts Russell's nice solution and instead marks the head.S file to be built for armv7-a, which fortunately lets us build all instructions in that file without warnings even on the broken binutils. Without this patch, building anything results in: arch/arm/boot/compressed/head.S: Assembler messages: arch/arm/boot/compressed/head.S:565: Warning: (null) arch/arm/boot/compressed/head.S:676: Warning: (null) arch/arm/boot/compressed/head.S:698: Warning: (null) arch/arm/boot/compressed/head.S:722: Warning: (null) arch/arm/boot/compressed/head.S:726: Warning: (null) arch/arm/boot/compressed/head.S:957: Warning: (null) arch/arm/boot/compressed/head.S:996: Warning: (null) arch/arm/boot/compressed/head.S:997: Warning: (null) arch/arm/boot/compressed/head.S:1027: Warning: (null) arch/arm/boot/compressed/head.S:1035: Warning: (null) arch/arm/boot/compressed/head.S:1046: Warning: (null) arch/arm/boot/compressed/head.S:1060: Warning: (null) arch/arm/boot/compressed/head.S:1092: Warning: (null) arch/arm/boot/compressed/head.S:1094: Warning: (null) arch/arm/boot/compressed/head.S:1095: Warning: (null) arch/arm/boot/compressed/head.S:1102: Warning: (null) arch/arm/boot/compressed/head.S:1134: Warning: (null) Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Matthew Gretton-Dann <matthew.gretton-dann@arm.com> Signed-off-by:
-
Arnd Bergmann authored
commit 92bdd3f5 upstream. The cpu_topology symbol is required by any driver using the topology interfaces, which leads to a couple of build errors: ERROR: "cpu_topology" [drivers/net/ethernet/sfc/sfc.ko] undefined! ERROR: "cpu_topology" [drivers/cpufreq/arm_big_little.ko] undefined! ERROR: "cpu_topology" [drivers/block/mtip32xx/mtip32xx.ko] undefined! The obvious solution is to export this symbol. Signed-off-by:
-
Linus Walleij authored
commit 0259d9eb upstream. The UART1 is on the fast AHB bridge, not on the slow bus. Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Arnd Bergmann authored
commit fa5ce5f9 upstream. New ARM binutils don't allow extraneous whitespace inside of brackets, which causes this error on all mach-w90x900 defconfigs: arch/arm/kernel/entry-armv.S: Assembler messages: arch/arm/kernel/entry-armv.S:214: Error: ARM register expected -- `ldr r0,[ r6,#(0x10C)]' arch/arm/kernel/entry-armv.S:214: Error: ARM register expected -- `ldr r0,[ r6,#(0x110)]' arch/arm/kernel/entry-armv.S:430: Error: ARM register expected -- `ldr r0,[ r6,#(0x10C)]' arch/arm/kernel/entry-armv.S:430: Error: ARM register expected -- `ldr r0,[ r6,#(0x110)]' This removes the whitespace in order to build the kernel again. Signed-off-by:
-
Shawn Guo authored
commit a46d2619 upstream. The binding doc and dts use properties "fsl,{cd,wp}-internal" while esdhc driver uses "fsl,{cd,wp}-controller". Fix binding doc and dts to get them match driver code. Reported-by:
Chris Ball <cjb@laptop.org> Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Acked-by:
-
Manoj Chourasia authored
commit 212a871a upstream. This changes puts the commit 4fe9f8e2 back in place with the fixes for slab corruption because of the commit. When a device is unplugged, wait for all processes that have opened the device to close before deallocating the device. This commit was solving kernel crash because of the corruption in rb tree of vmalloc. The rootcause was the device data pointer was geting excessed after the memory associated with hidraw was freed. The commit 4fe9f8e2 was buggy as it was also freeing the hidraw first and then calling delete operation on the list associated with that hidraw leading to slab corruption. Signed-off-by:
Manoj Chourasia <mchourasia@nvidia.com> Tested-by:
Peter Wu <lekensteyn@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Jiri Kosina authored
commit 570637dc upstream. Fix build problem caused by typo introduced by 620ae90e ("HID: usbhid: quirk for MSI GX680R led panel"). Reported-by: fengguang.wu@intel.com Signed-off-by:
-
Josh Boyer authored
commit 620ae90e upstream. This keyboard backlight device causes a 10 second delay to boot. Add it to the quirk list with HID_QUIRK_NO_INIT_REPORTS. This fixes Red Hat bugzilla https://bugzilla.redhat.com/show_bug.cgi?id=907221Signed-off-by:
Josh Boyer <jwboyer@redhat.com> Signed-off-by:
-
Fernando Luis Vazquez Cao authored
commit 99d24902 upstream. Document what the fix-up is does and make it more robust by ensuring that it is only applied to the USB interface that corresponds to the mouse (sony_report_fixup() is called once per interface during probing). Cc: linux-input@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by:
-
Fernando Luis Vazquez Cao authored
commit a4649184 upstream. Some Vaio desktop computers, among them the VGC-LN51JGB multimedia PC, have a RF receiver, multi-interface USB device 054c:0374, that is used to connect a wireless keyboard and a wireless mouse. The keyboard works flawlessly, but the mouse (VGP-WMS3 in my case) does not seem to be generating any pointer events. The problem is that the mouse pointer is wrongly declared as a constant non-data variable in the report descriptor (see lsusb and usbhid-dump output below), with the consequence that it is ignored by the HID code. Add this device to the have-special-driver list and fix up the report descriptor in the Sony-specific driver which happens to already have a fixup for a similar firmware bug. # lsusb -vd 054C:0374 Bus 003 Device 002: ID 054c:0374 Sony Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x054c Sony Corp. idProduct 0x0374 iSerial 0 [...] Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 2 Mouse iInterface 2 RF Receiver [...] Report Descriptor: (length is 100) [...] Item(Global): Usage Page, data= [ 0x01 ] 1 Generic Desktop Controls Item(Local ): Usage, data= [ 0x30 ] 48 Direction-X Item(Local ): Usage, data= [ 0x31 ] 49 Direction-Y Item(Global): Report Count, data= [ 0x02 ] 2 Item(Global): Report Size, data= [ 0x08 ] 8 Item(Global): Logical Minimum, data= [ 0x81 ] 129 Item(Global): Logical Maximum, data= [ 0x7f ] 127 Item(Main ): Input, data= [ 0x07 ] 7 Constant Variable Relative No_Wrap Linear Preferred_State No_Null_Position Non_Volatile Bitfield # usbhid-dump 003:002:001:DESCRIPTOR 1357910009.758544 05 01 09 02 A1 01 05 01 09 02 A1 02 85 01 09 01 A1 00 05 09 19 01 29 05 95 05 75 01 15 00 25 01 81 02 75 03 95 01 81 01 05 01 09 30 09 31 95 02 75 08 15 81 25 7F 81 07 A1 02 85 01 09 38 35 00 45 00 15 81 25 7F 95 01 75 08 81 06 C0 A1 02 85 01 05 0C 15 81 25 7F 95 01 75 08 0A 38 02 81 06 C0 C0 C0 C0 Cc: linux-input@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Alexey Kaminsky authored
commit 0a97e1e9 upstream. Signed-off-by:
Alexey Kaminsky <me@akaminsky.net> Signed-off-by:
-
Alexey Khoroshilov authored
commit bcb4a75b upstream. Several improvements in error handling: - do not report success if alloc_chrdev_region() failed - check for error code of cdev_add() - use unregister_chrdev_region() instead of unregister_chrdev() if class_create() failed Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Matthieu CASTET authored
commit 4c7b417e upstream. If we don't read fast enough hidraw device, hidraw_report_event will cycle and we will leak list->buffer. Also list->buffer are not free on release. After this patch, kmemleak report nothing. Signed-off-by:
Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by:
-
Jiri Kosina authored
commit d6d7c873 upstream. Commit b6787242 ("HID: hidraw: add proper error handling to raw event reporting") forgot to update the static inline version of hidraw_report_event() for the case when CONFIG_HIDRAW is unset. Fix that up. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Jiri Kosina authored
commit b6787242 upstream. If kmemdup() in hidraw_report_event() fails, we are not propagating this fact properly. Let hidraw_report_event() and hid_report_raw_event() return an error value to the caller. Reported-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Benjamin Tissoires authored
commit 8821f5dc upstream. When working on report indexes, always validate that they are in bounds. Without this, a HID device could report a malicious feature report that could trick the driver into a heap overflow: [ 634.885003] usb 1-1: New USB device found, idVendor=0596, idProduct=0500 ... [ 676.469629] BUG kmalloc-192 (Tainted: G W ): Redzone overwritten Note that we need to change the indexes from s8 to s16 as they can be between -1 and 255. CVE-2013-2897 Cc: stable@vger.kernel.org Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Yijing Wang <wangyijing@huawei.com> Signed-off-by:
-
Benjamin Tissoires authored
commit cc6b54aa upstream. When dealing with usage_index, be sure to properly use unsigned instead of int to avoid overflows. When working on report fields, always validate that their report_counts are in bounds. Without this, a HID device could report a malicious feature report that could trick the driver into a heap overflow: [ 634.885003] usb 1-1: New USB device found, idVendor=0596, idProduct=0500 ... [ 676.469629] BUG kmalloc-192 (Tainted: G W ): Redzone overwritten CVE-2013-2897 Cc: stable@vger.kernel.org Signed-off-by:
-
Nicholas Santos authored
commit 320cde19 upstream. Patch to add the Formosa Industrial Computing, Inc. Infrared Receiver [IR605A/Q] to hid-ids.h and hid-quirks.c. This IR receiver causes about a 10 second timeout when the usbhid driver attempts to initialze the device. Adding this device to the quirks list with HID_QUIRK_NO_INIT_REPORTS removes the delay. Signed-off-by:
Nicholas Santos <nicholas.santos@gmail.com> [jkosina@suse.cz: fix ordering] Signed-off-by:
-
Marek Vasut authored
commit 2843b673 upstream. The USB recovery mode present in i.MX28 ROM emulates USB HID. It needs this quirk to behave properly. Signed-off-by:
-
Konrad Rzeszutek Wilk authored
commit 3735d524 upstream. If the machine is booted without any cpu_idle driver set (b/c disable_cpuidle() has been called) we should follow other users of cpu_idle API and check the return value for NULL before using it. Reported-and-tested-by:
Mark van Dijk <mark@internecto.net> Suggested-by:
Jan Beulich <JBeulich@suse.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Cc: Daniel Kiper <daniel.kiper@oracle.com> Signed-off-by:
-
Paul Moore authored
commit f64410ec upstream. This patch is based on an earlier patch by Eric Paris, he describes the problem below: "If an inode is accessed before policy load it will get placed on a list of inodes to be initialized after policy load. After policy load we call inode_doinit() which calls inode_doinit_with_dentry() on all inodes accessed before policy load. In the case of inodes in procfs that means we'll end up at the bottom where it does: /* Default to the fs superblock SID. */ isec->sid = sbsec->sid; if ((sbsec->flags & SE_SBPROC) && !S_ISLNK(inode->i_mode)) { if (opt_dentry) { isec->sclass = inode_mode_to_security_class(...) rc = selinux_proc_get_sid(opt_dentry, isec->sclass, &sid); if (rc) goto out_unlock; isec->sid = sid; } } Since opt_dentry is null, we'll never call selinux_proc_get_sid() and will leave the inode labeled with the label on the superblock. I believe a fix would be to mimic the behavior of xattrs. Look for an alias of the inode. If it can't be found, just leave the inode uninitialized (and pick it up later) if it can be found, we should be able to call selinux_proc_get_sid() ..." On a system exhibiting this problem, you will notice a lot of files in /proc with the generic "proc_t" type (at least the ones that were accessed early in the boot), for example: # ls -Z /proc/sys/kernel/shmmax | awk '{ print $4 " " $5 }' system_u:object_r:proc_t:s0 /proc/sys/kernel/shmmax However, with this patch in place we see the expected result: # ls -Z /proc/sys/kernel/shmmax | awk '{ print $4 " " $5 }' system_u:object_r:sysctl_kernel_t:s0 /proc/sys/kernel/shmmax Cc: Eric Paris <eparis@redhat.com> Signed-off-by:
Paul Moore <pmoore@redhat.com> Acked-by:
Eric Paris <eparis@redhat.com> Signed-off-by:
-
George Spelvin authored
commit d953e0e8 upstream. Remove the cdev from the system (with cdev_del) *before* deallocating it (in pps_device_destruct, called via kobject_put from device_destroy). Also prevent deallocating a device with open file handles. A better long-term fix is probably to remove the cdev from the pps_device entirely, and instead have all devices reference one global cdev. Then the deallocation ordering becomes simpler. But that's more complex and invasive change, so we leave that for later. Signed-off-by:
George Spelvin <linux@horizon.com> Acked-by:
Rodolfo Giometti <giometti@enneenne.com> Signed-off-by:
-
George Spelvin authored
commit 03a7ffe4 upstream. Now that N_TTY uses tty->disc_data for its private data, 'subclass' ldiscs cannot use ->disc_data for their own private data. (This is a regression is v3.8-rc1) Use pps_lookup_dev to associate the tty with the pps source instead. This fixes a crashing regression in 3.8-rc1. Signed-off-by:
-
George Spelvin authored
commit 513b032c upstream. The PPS serial line discipline wants to attach a PPS device to a tty without changing the tty code to add a struct pps_device * pointer. Since the number of PPS devices in a typical system is generally very low (n=1 is by far the most common), it's practical to search the entire list of allocated pps devices. (We capture the timestamp before the lookup, so the timing isn't affected.) It is a bit ugly that this function, which is part of the in-kernel PPS API, has to be in pps.c as opposed to kapi,c, but that's not something that affects users. Signed-off-by:
-
Philipp Reisner authored
commit 9749f30f upstream. Inspired by the list_for_each_entry() macro Signed-off-by:
Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by:
-
Mathias Krause authored
commit 4e9b45a1 upstream. On 64 bit systems the test for negative message sizes is bogus as the size, which may be positive when evaluated as a long, will get truncated to an int when passed to load_msg(). So a long might very well contain a positive value but when truncated to an int it would become negative. That in combination with a small negative value of msg_ctlmax (which will be promoted to an unsigned type for the comparison against msgsz, making it a big positive value and therefore make it pass the check) will lead to two problems: 1/ The kmalloc() call in alloc_msg() will allocate a too small buffer as the addition of alen is effectively a subtraction. 2/ The copy_from_user() call in load_msg() will first overflow the buffer with userland data and then, when the userland access generates an access violation, the fixup handler copy_user_handle_tail() will try to fill the remainder with zeros -- roughly 4GB. That almost instantly results in a system crash or reset. ,-[ Reproducer (needs to be run as root) ]-- | #include <sys/stat.h> | #include <sys/msg.h> | #include <unistd.h> | #include <fcntl.h> | | int main(void) { | long msg = 1; | int fd; | | fd = open("/proc/sys/kernel/msgmax", O_WRONLY); | write(fd, "-1", 2); | close(fd); | | msgsnd(0, &msg, 0xfffffff0, IPC_NOWAIT); | | return 0; | } '--- Fix the issue by preventing msgsz from getting truncated by consistently using size_t for the message length. This way the size checks in do_msgsnd() could still be passed with a negative value for msg_ctlmax but we would fail on the buffer allocation in that case and error out. Also change the type of m_ts from int to size_t to avoid similar nastiness in other code paths -- it is used in similar constructs, i.e. signed vs. unsigned checks. It should never become negative under normal circumstances, though. Setting msg_ctlmax to a negative value is an odd configuration and should be prevented. As that might break existing userland, it will be handled in a separate commit so it could easily be reverted and reworked without reintroducing the above described bug. Hardening mechanisms for user copy operations would have catched that bug early -- e.g. checking slab object sizes on user copy operations as the usercopy feature of the PaX patch does. Or, for that matter, detect the long vs. int sign change due to truncation, as the size overflow plugin of the very same patch does. [akpm@linux-foundation.org: fix i386 min() warnings] Signed-off-by:
Mathias Krause <minipli@googlemail.com> Cc: Pax Team <pageexec@freemail.hu> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Brad Spengler <spender@grsecurity.net> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 3.2: - Adjust context - Drop changes to alloc_msg() and copy_msg(), which don't exist] Signed-off-by:
-
Ingo Molnar authored
commit 3f0116c3 upstream. Fengguang Wu, Oleg Nesterov and Peter Zijlstra tracked down a kernel crash to a GCC bug: GCC miscompiles certain 'asm goto' constructs, as outlined here: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670 Implement a workaround suggested by Jakub Jelinek. Reported-and-tested-by:
Fengguang Wu <fengguang.wu@intel.com> Reported-by:
Oleg Nesterov <oleg@redhat.com> Reported-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Suggested-by:
Jakub Jelinek <jakub@redhat.com> Reviewed-by:
Richard Henderson <rth@twiddle.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Qiang Huang <h.huangqiang@huawei.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Signed-off-by:
-
Daniel Santos authored
commit 3f3f8d2f upstream. Throughout compiler*.h, many version checks are made. These can be simplified by using the macro that gcc's documentation recommends. However, my primary reason for adding this is that I need bug-check macros that are enabled at certain gcc versions and it's cleaner to use this macro than the tradition method: #if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ => 2) If you add patch level, it gets this ugly: #if __GNUC__ > 4 || (__GNUC__ == 4 && (__GNUC_MINOR__ > 2 || \ __GNUC_MINOR__ == 2 __GNUC_PATCHLEVEL__ >= 1)) As opposed to: #if GCC_VERSION >= 40201 While having separate headers for gcc 3 & 4 eliminates some of this verbosity, they can still be cleaned up by this. See also: http://gcc.gnu.org/onlinedocs/cpp/Common-Predefined-Macros.htmlSigned-off-by:
Daniel Santos <daniel.santos@pobox.com> Acked-by:
Borislav Petkov <bp@alien8.de> Acked-by:
David Rientjes <rientjes@google.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Joe Perches <joe@perches.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Tejun Heo authored
commit b22ce278 upstream. If !PREEMPT, a kworker running work items back to back can hog CPU. This becomes dangerous when a self-requeueing work item which is waiting for something to happen races against stop_machine. Such self-requeueing work item would requeue itself indefinitely hogging the kworker and CPU it's running on while stop_machine would wait for that CPU to enter stop_machine while preventing anything else from happening on all other CPUs. The two would deadlock. Jamie Liu reports that this deadlock scenario exists around scsi_requeue_run_queue() and libata port multiplier support, where one port may exclude command processing from other ports. With the right timing, scsi_requeue_run_queue() can end up requeueing itself trying to execute an IO which is asked to be retried while another device has an exclusive access, which in turn can't make forward progress due to stop_machine. Fix it by invoking cond_resched() after executing each work item. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Jamie Liu <jamieliu@google.com> References: http://thread.gmane.org/gmane.linux.kernel/1552567 [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Bu, Yitian authored
commit dbda92d1 upstream. commit 07354eb1 ("locking printk: Annotate logbuf_lock as raw") reintroduced a lock inversion problem which was fixed in commit 0b5e1c52 ("printk: Release console_sem after logbuf_lock"). This happened probably when fixing up patch rejects. Restore the ordering and unlock logbuf_lock before releasing console_sem. Signed-off-by:
ybu <ybu@qti.qualcomm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/E807E903FE6CBE4D95E420FBFCC273B827413C@nasanexd01h.na.qualcomm.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Oleg Nesterov authored
commit f000cfdd upstream. audit_log_start() does wait_for_auditd() in a loop until audit_backlog_wait_time passes or audit_skb_queue has a room. If signal_pending() is true this becomes a busy-wait loop, schedule() in TASK_INTERRUPTIBLE won't block. Thanks to Guy for fully investigating and explaining the problem. (akpm: that'll cause the system to lock up on a non-preemptible uniprocessor kernel) (Guy: "Our customer was in fact running a uniprocessor machine, and they reported a system hang.") Signed-off-by:
Guy Streeter <streeter@redhat.com> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Tejun Heo authored
commit 326cf0f0 upstream. Most functions in idr fail to deal with the high bits when the idr tree grows to the maximum height. * idr_get_empty_slot() stops growing idr tree once the depth reaches MAX_IDR_LEVEL - 1, which is one depth shallower than necessary to cover the whole range. The function doesn't even notice that it didn't grow the tree enough and ends up allocating the wrong ID given sufficiently high @starting_id. For example, on 64 bit, if the starting id is 0x7fffff01, idr_get_empty_slot() will grow the tree 5 layer deep, which only covers the 30 bits and then proceed to allocate as if the bit 30 wasn't specified. It ends up allocating 0x3fffff01 without the bit 30 but still returns 0x7fffff01. * __idr_remove_all() will not remove anything if the tree is fully grown. * idr_find() can't find anything if the tree is fully grown. * idr_for_each() and idr_get_next() can't iterate anything if the tree is fully grown. Fix it by introducing idr_max() which returns the maximum possible ID given the depth of tree and replacing the id limit checks in all affected places. As the idr_layer pointer array pa[] needs to be 1 larger than the maximum depth, enlarge pa[] arrays by one. While this plugs the discovered issues, the whole code base is horrible and in desparate need of rewrite. It's fragile like hell, Signed-off-by:
-
Artem Bityutskiy authored
commit 8d238027 upstream. We display a list of supplementary group for each process in /proc/<pid>/status. However, we show only the first 32 groups, not all of them. Although this is rare, but sometimes processes do have more than 32 supplementary groups, and this kernel limitation breaks user-space apps that rely on the group list in /proc/<pid>/status. Number 32 comes from the internal NGROUPS_SMALL macro which defines the length for the internal kernel "small" groups buffer. There is no apparent reason to limit to this value. This patch removes the 32 groups printing limit. The Linux kernel limits the amount of supplementary groups by NGROUPS_MAX, which is currently set to 65536. And this is the maximum count of groups we may possibly print. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by:
Serge E. Hallyn <serge.hallyn@ubuntu.com> Acked-by:
-
- 03 Apr, 2014 2 commits
-
-
Greg Kroah-Hartman authored
-
Daniel Borkmann authored
commit b22f5126 upstream. Some occurences in the netfilter tree use skb_header_pointer() in the following way ... struct dccp_hdr _dh, *dh; ... skb_header_pointer(skb, dataoff, sizeof(_dh), &dh); ... where dh itself is a pointer that is being passed as the copy buffer. Instead, we need to use &_dh as the forth argument so that we're copying the data into an actual buffer that sits on the stack. Currently, we probably could overwrite memory on the stack (e.g. with a possibly mal-formed DCCP packet), but unintentionally, as we only want the buffer to be placed into _dh variable. Fixes: 2bc78049 ("[NETFILTER]: nf_conntrack: add DCCP protocol support") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
