1. 18 Dec, 2018 9 commits
  2. 17 Dec, 2018 11 commits
    • Ming Lei's avatar
      blk-mq: skip zero-queue maps in blk_mq_map_swqueue · e5edd5f2
      Ming Lei authored
      From 7e849dd9 ("nvme-pci: don't share queue maps"), the mapping
      table won't be initialized actually if map->nr_queues is zero, so
      we can't use blk_mq_map_queue_type() to retrieve hctx any more.
      
      This way still may cause broken mapping, fix it by skipping zero-queues
      maps in blk_mq_map_swqueue().
      
      Cc: Jeff Moyer <jmoyer@redhat.com>
      Cc: Mike Snitzer <snitzer@redhat.com>
      Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarMing Lei <ming.lei@redhat.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      e5edd5f2
    • Dennis Zhou's avatar
      block: fix blk-iolatency accounting underflow · 13369816
      Dennis Zhou authored
      The blk-iolatency controller measures the time from rq_qos_throttle() to
      rq_qos_done_bio() and attributes this time to the first bio that needs
      to create the request. This means if a bio is plug-mergeable or
      bio-mergeable, it gets to bypass the blk-iolatency controller.
      
      The recent series [1], to tag all bios w/ blkgs undermined how iolatency
      was determining which bios it was charging and should process in
      rq_qos_done_bio(). Because all bios are being tagged, this caused the
      atomic_t for the struct rq_wait inflight count to underflow and result
      in a stall.
      
      This patch adds a new flag BIO_TRACKED to let controllers know that a
      bio is going through the rq_qos path. blk-iolatency now checks if this
      flag is set to see if it should process the bio in rq_qos_done_bio().
      
      Overloading BLK_QUEUE_ENTERED works, but makes the flag rules confusing.
      BIO_THROTTLED was another candidate, but the flag is set for all bios
      that have gone through blk-throttle code. Overloading a flag comes with
      the burden of making sure that when either implementation changes, a
      change in setting rules for one doesn't cause a bug in the other. So
      here, we unfortunately opt for adding a new flag.
      
      [1] https://lore.kernel.org/lkml/20181205171039.73066-1-dennis@kernel.org/
      
      Fixes: 5cdf2e3f ("blkcg: associate blkg when associating a device")
      Signed-off-by: default avatarDennis Zhou <dennis@kernel.org>
      Cc: Josef Bacik <josef@toxicpanda.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      13369816
    • Ming Lei's avatar
      blk-mq: fix dispatch from sw queue · c16d6b5a
      Ming Lei authored
      When a request is added to rq list of sw queue(ctx), the rq may be from
      a different type of hctx, especially after multi queue mapping is
      introduced.
      
      So when dispach request from sw queue via blk_mq_flush_busy_ctxs() or
      blk_mq_dequeue_from_ctx(), one request belonging to other queue type of
      hctx can be dispatched to current hctx in case that read queue or poll
      queue is enabled.
      
      This patch fixes this issue by introducing per-queue-type list.
      
      Cc: Christoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarMing Lei <ming.lei@redhat.com>
      
      Changed by me to not use separately cacheline aligned lists, just
      place them all in the same cacheline where we had just the one list
      and lock before.
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      c16d6b5a
    • Damien Le Moal's avatar
      block: mq-deadline: Fix write completion handling · 7211aef8
      Damien Le Moal authored
      For a zoned block device using mq-deadline, if a write request for a
      zone is received while another write was already dispatched for the same
      zone, dd_dispatch_request() will return NULL and the newly inserted
      write request is kept in the scheduler queue waiting for the ongoing
      zone write to complete. With this behavior, when no other request has
      been dispatched, rq_list in blk_mq_sched_dispatch_requests() is empty
      and blk_mq_sched_mark_restart_hctx() not called. This in turn leads to
      __blk_mq_free_request() call of blk_mq_sched_restart() to not run the
      queue when the already dispatched write request completes. The newly
      dispatched request stays stuck in the scheduler queue until eventually
      another request is submitted.
      
      This problem does not affect SCSI disk as the SCSI stack handles queue
      restart on request completion. However, this problem is can be triggered
      the nullblk driver with zoned mode enabled.
      
      Fix this by always requesting a queue restart in dd_dispatch_request()
      if no request was dispatched while WRITE requests are queued.
      
      Fixes: 5700f691 ("mq-deadline: Introduce zone locking support")
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarDamien Le Moal <damien.lemoal@wdc.com>
      
      Add missing export of blk_mq_sched_restart()
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      7211aef8
    • Christoph Hellwig's avatar
      nvme-pci: don't share queue maps · 7e849dd9
      Christoph Hellwig authored
      Now that the block layer checks if a queue map has any queues inside
      it there is no more reason to duplicate the maps for the non-default
      types.
      Reviewed-by: default avatarMing Lei <ming.lei@redhat.com>
      Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      7e849dd9
    • Christoph Hellwig's avatar
      blk-mq: only dispatch to non-defauly queue maps if they have queues · 5aceaeb2
      Christoph Hellwig authored
      We should check if a given queue map actually has queues enabled before
      dispatching to it.  This allows drivers to not initialize optional but
      not used map types, which subsequently will allow fixing problems with
      queue map rebuilds for that case.
      Reviewed-by: default avatarMing Lei <ming.lei@redhat.com>
      Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      5aceaeb2
    • Ming Lei's avatar
      blk-mq: export hctx->type in debugfs instead of sysfs · 346fc108
      Ming Lei authored
      Now we only export hctx->type via sysfs, and there isn't such info
      in hctx entry under debugfs. We often use debugfs only to diagnose
      queue mapping issue, so add the support in debugfs.
      
      Queue mapping becomes a bit more complicated after multiple queue
      mapping is supported, we may write blktest to verify if queue mapping
      is valid based on blk-mq-debugfs.
      
      Given not necessary to export hctx->type twice, so remove the export
      from sysfs.
      
      Cc: Jeff Moyer <jmoyer@redhat.com>
      Cc: Mike Snitzer <snitzer@redhat.com>
      Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarMing Lei <ming.lei@redhat.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      346fc108
    • Ming Lei's avatar
      blk-mq: fix allocation for queue mapping table · 07b35eb5
      Ming Lei authored
      Type of each element in queue mapping table is 'unsigned int,
      intead of 'struct blk_mq_queue_map)', so fix it.
      
      Cc: Jeff Moyer <jmoyer@redhat.com>
      Cc: Mike Snitzer <snitzer@redhat.com>
      Cc: Christoph Hellwig <hch@lst.de>
      Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarMing Lei <ming.lei@redhat.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      07b35eb5
    • Ming Lei's avatar
      blk-wbt: export internal state via debugfs · d19afebc
      Ming Lei authored
      This information is helpful to either investigate issues, or understand
      wbt's internal behaviour.
      
      Cc: Bart Van Assche <bart.vanassche@wdc.com>
      Cc: Omar Sandoval <osandov@fb.com>
      Cc: Christoph Hellwig <hch@lst.de>
      Cc: Josef Bacik <josef@toxicpanda.com>
      Signed-off-by: default avatarMing Lei <ming.lei@redhat.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      d19afebc
    • Ming Lei's avatar
      blk-mq-debugfs: support rq_qos · cc56694f
      Ming Lei authored
      blk-mq-debugfs has been proved as very helpful for debug some
      tough issues, such as IO hang.
      
      We have seen blk-wbt related IO hang several times, even inside
      Red Hat BZ, there is such report not sovled yet, so this patch
      adds support debugfs on rq_qos.
      
      Cc: Bart Van Assche <bart.vanassche@wdc.com>
      Cc: Omar Sandoval <osandov@fb.com>
      Cc: Christoph Hellwig <hch@lst.de>
      Cc: Josef Bacik <josef@toxicpanda.com>
      Signed-off-by: default avatarMing Lei <ming.lei@redhat.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      cc56694f
    • Damien Le Moal's avatar
      block: update sysfs documentation · f9824952
      Damien Le Moal authored
      Add the description of the zoned, nr_zones and chunk_sectors sysfs queue
      attributes to Documentation/block/queue-sysfs.txt. The description of
      the zoned and chunk_sector attributes are mostly copied from
      ABI/testing/sysfs-block (added a typo fix). While at it, also fix a
      typo in the description of the io_poll_delay attribute.
      
      nr_zones description is also added to ABI/testing/sysfs-block and
      contact email address updated for the zoned attribute.
      Signed-off-by: default avatarDamien Le Moal <damien.lemoal@wdc.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      f9824952
  3. 16 Dec, 2018 8 commits
  4. 14 Dec, 2018 4 commits
  5. 13 Dec, 2018 8 commits
    • Sagi Grimberg's avatar
      nvme: fix kernel paging oops · 092ff052
      Sagi Grimberg authored
      free the controller discard_page correctly.
      
      Fixes: cb5b7262 ("nvme: provide fallback for discard alloc failure")
      Signed-off-by: default avatarSagi Grimberg <sagi@grimberg.me>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      092ff052
    • Jens Axboe's avatar
      Merge branch 'nvme-4.21' of git://git.infradead.org/nvme into for-4.21/block · 2d9a058e
      Jens Axboe authored
      Pull NVMe updates from Christoph:
      
      "Here is the second large chunk of nvme updates for 4.21:
      
       - host and target support for NVMe over TCP (Sagi Grimberg,
      	Roy Shterman, Solganik Alexander)
       - error log page support in target (Chaitanya Kulkarni)
      
      plus small fixes and improvements from Jens Axboe and Chengguang Xu."
      
      * 'nvme-4.21' of git://git.infradead.org/nvme: (33 commits)
        nvme-rdma: support separate queue maps for read and write
        nvme-tcp: support separate queue maps for read and write
        nvme-fabrics: allow user to set nr_write_queues for separate queue maps
        nvme-fabrics: add missing nvmf_ctrl_options documentation
        blk-mq-rdma: pass in queue map to blk_mq_rdma_map_queues
        nvmet: update smart log with num err log entries
        nvmet: add error log page cmd handler
        nvmet: add error log support for file backend
        nvmet: add error log support for bdev backend
        nvmet: add error log support for admin-cmd
        nvmet: add error log support for rdma backend
        nvmet: add error log support for fabrics-cmd
        nvmet: add error log support in the core
        nvmet: add interface to update error-log page
        nvmet: add error-log definitions
        nvme: add error log page slot definition
        nvme: remove nvme_common command cdw10 array
        nvmet: remove unused variable
        nvme: provide fallback for discard alloc failure
        nvme: add __exit annotation
        ...
      2d9a058e
    • Guoju Fang's avatar
      bcache: print number of keys in trace_bcache_journal_write · e78bd0d2
      Guoju Fang authored
      Sometimes flush journal may be very frequent, so it's useful to dump
      number of keys every time write journal.
      Signed-off-by: default avatarGuoju Fang <fangguoju@gmail.com>
      Signed-off-by: default avatarColy Li <colyli@suse.de>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      e78bd0d2
    • Coly Li's avatar
      bcache: set writeback_percent in a flexible range · cc38ca7e
      Coly Li authored
      Because CUTOFF_WRITEBACK is defined as 40, so before the changes of
      dynamic cutoff writeback values, writeback_percent is limited to [0,
      CUTOFF_WRITEBACK]. Any value larger than CUTOFF_WRITEBACK will be fixed
      up to 40.
      
      Now cutof writeback limit is a dynamic value bch_cutoff_writeback, so
      the range of writeback_percent can be a more flexible range as [0,
      bch_cutoff_writeback]. The flexibility is, it can be expended to a
      larger or smaller range than [0, 40], depends on how value
      bch_cutoff_writeback is specified.
      
      The default value is still strongly recommended to most of users for
      most of workloads. But for people who want to do research on bcache
      writeback perforamnce tuning, they may have chance to specify more
      flexible writeback_percent in range [0, 70].
      Signed-off-by: default avatarColy Li <colyli@suse.de>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      cc38ca7e
    • Coly Li's avatar
      bcache: make cutoff_writeback and cutoff_writeback_sync tunable · 9aaf5165
      Coly Li authored
      Currently the cutoff writeback and cutoff writeback sync thresholds are
      defined by CUTOFF_WRITEBACK (40) and CUTOFF_WRITEBACK_SYNC (70) as
      static values. Most of time these they work fine, but when people want
      to do research on bcache writeback mode performance tuning, there is no
      chance to modify the soft and hard cutoff writeback values.
      
      This patch introduces two module parameters bch_cutoff_writeback_sync
      and bch_cutoff_writeback which permit people to tune the values when
      loading bcache.ko. If they are not specified by module loading, current
      values CUTOFF_WRITEBACK_SYNC and CUTOFF_WRITEBACK will be used as
      default and nothing changes.
      
      When people want to tune this two values,
      - cutoff_writeback can be set in range [1, 70]
      - cutoff_writeback_sync can be set in range [1, 90]
      - cutoff_writeback always <= cutoff_writeback_sync
      
      The default values are strongly recommended to most of users for most of
      workloads. Anyway, if people wants to take their own risk to do research
      on new writeback cutoff tuning for their own workload, now they can make
      it.
      Signed-off-by: default avatarColy Li <colyli@suse.de>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      9aaf5165
    • Coly Li's avatar
      bcache: add MODULE_DESCRIPTION information · 009673d0
      Coly Li authored
      This patch moves MODULE_AUTHOR and MODULE_LICENSE to end of super.c, and
      add MODULE_DESCRIPTION("Bcache: a Linux block layer cache").
      
      This is preparation for adding module parameters.
      Signed-off-by: default avatarColy Li <colyli@suse.de>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      009673d0
    • Coly Li's avatar
      bcache: option to automatically run gc thread after writeback · 7a671d8e
      Coly Li authored
      The option gc_after_writeback is disabled by default, because garbage
      collection will discard SSD data which drops cached data.
      
      Echo 1 into /sys/fs/bcache/<UUID>/internal/gc_after_writeback will
      enable this option, which wakes up gc thread when writeback accomplished
      and all cached data is clean.
      
      This option is helpful for people who cares writing performance more. In
      heavy writing workload, all cached data can be clean only happens when
      writeback thread cleans all cached data in I/O idle time. In such
      situation a following gc running may help to shrink bcache B+ tree and
      discard more clean data, which may be helpful for future writing
      requests.
      
      If you are not sure whether this is helpful for your own workload,
      please leave it as disabled by default.
      Signed-off-by: default avatarColy Li <colyli@suse.de>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      7a671d8e
    • Coly Li's avatar
      bcache: introduce force_wake_up_gc() · cb07ad63
      Coly Li authored
      Garbage collection thread starts to work when c->sectors_to_gc is
      negative value, otherwise nothing will happen even the gc thread is
      woken up by wake_up_gc().
      
      force_wake_up_gc() sets c->sectors_to_gc to -1 before calling
      wake_up_gc(), then gc thread may have chance to run if no one else sets
      c->sectors_to_gc to a positive value before gc_should_run().
      
      This routine can be called where the gc thread is woken up and required
      to run in force.
      Signed-off-by: default avatarColy Li <colyli@suse.de>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      cb07ad63