Removes an atavism in declaration of sys_nfsservctl() - sorry, I should've
remove that junk when cond_syscall() thing was done.

Found by Andrew Morton <akpm@zip.com.au>

 This patch fixes small typo in ikernel informational message.

 This patch fixes a problem that was created during inode structure
 cleanup/ private parts separation. This fix was made by Chris Mason.
 This is very critical bugfix. Without it, filesystem corruption
 happens on savelinks processing and possibly in some other cases.

This patch removes one tail_conversion object out of build list,
because it was specified twice. (noticed by Jeff Garzik)

This patch removes confusing warning about journal replay on readonly FS

This patch is to change comment of CONFIG_REISERFS_PROC_INFO config item,
to make it more clear.

This patch renames reiserfs debugging option in config output,
to make its meaning more clear.

This patch is to fix journal replay bug where old code would replay
transactions with mount_id != mount_id recorded in journal header.
Fixed by Chris Mason.

This patch solves a problem where separate journal device was not freed
if journal initialisation failed

This patch is to add forgotten metadata journaling for a case when
we free blocks after tail conversion failures. Found and fixed by Chris Mason

This patch is to fix a case where flag was not set at inode-read time which
prevented 32bit uid/gid to work correctly.

This patch is to convert pap14030 panic into warning. While doing this,
a bug was uncovered, that when get_block() returns a failure, buffer
is still marked as mapped, and on subsequent access to this buffer
get_block() was not called anymore. This is also fixed.

This patch is to fix a lookup problem on bigendian platforms

This patch is to fix a problem when directory's atime was not updated on
readdir(). Patch is written by Chris Mason.

- Integrate the TCQ stuff from Jens Axboe. Deal with the conflicts, apply some
   cosmetic changes. We are still not at a stage where we could immediately
   integrate ata_request and ata_taskfile but we are no longer far away.

- Clean up the data transfer function in ide-disk to use ata_request structures
   directly.

- Kill useless leading version information in ide-disk.c

- Replace the ATA_AR_INIT macro with inline ata_ar_init() function.

- Replace IDE_CLEAR_TAG with ata_clear_tag().

- Replace IDE_SET_TAG with ata_set_tag().

- Kill georgeous ide_dmafunc_verbose().

- Fix typo in ide_enable_queued() (ide-tcq.c!)

Apparently there still problems with a TCQ enabled device and a not enabled
device on the same channel, but let's first synchronize up with Jens.

- Eliminate ide_task_t and rename struct ide_task_s to struct ata_taskfile.
   This should become the entity which is holding all data for a request in the
   future. If this turns out to be the case, we will just rename it to
   ata_request.

- Reduce the number of arguments for the ata_taskfile() function. This helps to
   wipe quite a lot of code out as well.

This stage is not sensitive, so let's make a patch before we start to integrate
the last work of Jens Axboe.

into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux

and scheduling-in-interrupt problems we had, and also makes it
much faster when handling large numbers (100s or more) of PPP units.

into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux

and cacheflush.h in a few places where they are needed.

flushing code a little.

Patch to cciss driver in 2.4.8-pre2 to use pdev->irq
and other pci_dev structure elements only after calling
pci_enable_device.

Morten Helgesen <admin@nextframe.net> sent me this.

The latest ACPI merge accidentally clobbered another change in pci-irq.c.
Here's the original patch again (applies fine except for an offset)
Thanks -- Andy

into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux

More places where we want the size of block device and have relevant
struct block_device * available,

Fixes races in jffs2_get_sb() - current code has a window when two
mounts of the same mtd device can miss each other, resulting in two
active instances of jffs2 fighting over the same device.

Assorted compile fixes in mtdblock.c

All places where we do blkdev_size_in_bytes(sb->s_dev) are bogus - we
can get the same information from ->s_bdev without messing with kdev_t,
major/minor, etc.

There will be more patches of that kind - in the long run I'd expect
only one caller of blkdev_size_in_bytes() to survive.  One if
fs/block_dev.c, that is - called when we open device.

Pretty simple.

- use a timer to kick off a pdflush thread every five seconds
  to run the kupdate code.

- wakeup_bdflush() kicks off a pdflush thread to run the current
  bdflush function.

There's some loss of functionality here - the ability to tune
the writeback periods.  The numbers are hardwired at present.
But the intent is that buffer-based writeback disappears
altogether.  New mechanisms for tuning the writeback will
need to be introduced.

This is pdflush's first application!  The writeback of
the unused inodes list by keventd is removed, and a
pdflush thread is dispatched instead.

There is a need for exclusion - to prevent all the
pdflush threads from working against the same request
queue.  This is implemented locally.  And this is a
problem, because other pdflush threads can be dispatched
to writeback other filesystem objects, and they don't
know that there's already a pdflush thread working that
request queue.

So moving the exclusion into the request queue itself
is on my things-to-do-list.  But the code as-is works
OK - under a `dbench 100' load the number of pdflush
instances can grow as high as four or five.  Some fine
tuning is needed...

This patch implements a gang-of-threads which are designed to
be used for dirty data writeback. "pdflush" -> dirty page
flush, or something.

The number of threads is dynamically managed by a simple
demand-driven algorithm.

"Oh no, more kernel threads".  Don't worry, kupdate and
bdflush disappear later.

The intent is that no two pdflush threads are ever performing
writeback against the same request queue at the same time.
It would be wasteful to do that.  My current patches don't
quite achieve this; I need to move the state into the request
queue itself...

The driver for implementing the thread pool was to avoid the
possibility where bdflush gets stuck on one device's get_request_wait()
queue while lots of other disks sit idle.  Also generality,
abstraction, and the need to have something in place to perform
the address_space-based writeback when the buffer_head-based
writeback disappears.

There is no provision inside the pdflush code itself to prevent
many threads from working against the same device.  That's
the responsibility of the caller.

The main API function, `pdflush_operation()' attempts to find
a thread to do some work for you.  It is not reliable - it may
return -1 and say "sorry, I didn't do that".  This happens if
all threads are busy.

One _could_ extend pdflush_operation() to queue the work so that
it is guaranteed to happen.  If there's a need, that additional
minor complexity can be added.

page->buffers is a bit of a layering violation.  Not all address_spaces
have pages which are backed by buffers.

The exclusive use of page->buffers for buffers means that a piece of
prime real estate in struct page is unavailable to other forms of
address_space.

This patch turns page->buffers into `unsigned long page->private' and
sets in place all the infrastructure which is needed to allow other
address_spaces to use this storage.

This change alows the multipage-bio-writeout patches to use
page->private to cache the results of an earlier get_block(), so
repeated calls into the filesystem are not needed in the case of file
overwriting.

Devlopers should think carefully before calling try_to_free_buffers()
or block_flushpage() or writeout_one_page() or waitfor_one_page()
against a page.  It's only legal to do this if you *know* that the page
is buffer-backed.  And only the address_space knows that.
Arguably, we need new a_ops for writeout_one_page() and
waitfor_one_page().  But I have more patches on the boil which
obsolete these functions in favour of ->writepage() and wait_on_page().

The new PG_private page bit is used to indicate that there
is something at page->private.  The core kernel does not
know what that object actually is, just that it's there.
The kernel must call a_ops->releasepage() to try to make
page->private go away.  And a_ops->flushpage() at truncate
time.

I'd like to be able to claim amazing speedups, but
the best benchmark I could find was diffing two
256 megabyte files, which is about 10% quicker.  And
that is probably due to the window size being effectively
50% larger.

Fact is, any disk worth owning nowadays has a segmented
2-megabyte cache, and OS-level readahead mainly seems
to save on CPU cycles rather than overall throughput.
Once you start reading more streams than there are segments
in the disk cache we start to win.

Still.  The main motivation for this work is to
clean the code up, and to create a central point at
which many pages are marshalled together so that
they can all be encapsulated into the smallest possible
number of BIOs, and injected into the request layer.

A number of filesystems were poking around inside the
readahead state variables.  I'm not really sure what they
were up to, but I took all that out.  The readahead
code manages its own state autonomously and should not
need any hints.

- Unifies the current three readahead functions (mmap reads, read(2)
  and sys_readhead) into a single implementation.

- More aggressive in building up the readahead windows.

- More conservative in tearing them down.

- Special start-of-file heuristics.

- Preallocates the readahead pages, to avoid the (never demonstrated,
  but potentially catastrophic) scenario where allocation of readahead
  pages causes the allocator to perform VM writeout.

- Gets all the readahead pages gathered together in
  one spot, so they can be marshalled into big BIOs.

- reinstates the readahead ioctls, so hdparm(8) and blockdev(8)
  are working again.  The readahead settings are now per-request-queue,
  and the drivers never have to know about it.  I use blockdev(8).
  It works in units of 512 bytes.

- Identifies readahead thrashing.

  Also attempts to handle it.  Certainly the changes here
  delay the onset of catastrophic readahead thrashing by
  quite a lot, and decrease it seriousness as we get more
  deeply into it, but it's still pretty bad.