Job fence on page table should be a shared one, so add it to the root
page talbe bo resv.
last_delayed field is not needed anymore. so remove it.

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix switch-case indentation in amdgpu_ctx_init_entity()
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

what changed:
1)provide new implementation interface for the rlcg access path
2)put SQ_CMD/SQ_IND_INDEX to GFX9 RLCG path to let debugfs's reg_op
function can access reg that need RLCG path help

now even debugfs's reg_op can used to dump wave.
tested-by: Monk Liu <monk.liu@amd.com>
tested-by: Zhou pengju <pengju.zhou@amd.com>
Signed-off-by: Zhou pengju <pengju.zhou@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

1db8c142 (drm/scheduler: Add drm_sched_suspend/resume_timeout()) made
the job_list_lock IRQ safe in as the suspend/resume calls were expected to
be called from IRQ context. This usage never materialized in upstream.
Instead amdgpu started locking the job_list_lock in an IRQ unsafe way in
amdgpu_ib_preempt_mark_partial_job() and amdgpu_ib_preempt_job_recovery(),
which leads to potential deadlock if one would actually start to call the
drm_sched_suspend/resume_timeout functions from IRQ context.

As no current user needs the locking to be IRQ safe, the local IRQ
disable/enable is pure overhead. Fix the inconsistent locking by changing
all uses of job_list_lock to use the IRQ unsafe locking primitives.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add a new trace event to show when jobs are run on the HW.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

clean up unused header in swsmu driver stack:
1. pp_debug.h
2. amd_pcie.h
3. soc15_common.h
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

AccVGPRs are newly added in arcturus. Before reading these
registers, they should be initialized. Otherwise edc error
happens, when RAS is enabled.

v2: reuse the existing logical to calculate register size
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This fixes a problem found on the MacBookPro 2017 Retina panel:

The panel reports 10 bpc color depth in its EDID, and the
firmware chooses link settings at boot which support enough
bandwidth for 10 bpc (324000 kbit/sec aka LINK_RATE_RBR2
aka 0xc), but the DP_MAX_LINK_RATE dpcd register only reports
2.7 Gbps (multiplier value 0xa) as possible, in direct
contradiction of what the firmware successfully set up.

This restricts the panel to 8 bpc, not providing the full
color depth of the panel on Linux <= 5.5. Additionally, commit
'4a8ca46b ("drm/amd/display: Default max bpc to 16 for eDP")'
introduced into Linux 5.6-rc1 will unclamp panel depth to
its full 10 bpc, thereby requiring a eDP bandwidth for all
modes that exceeds the bandwidth available and causes all modes
to fail validation -> No modes for the laptop panel -> failure
to set any mode -> Panel goes dark.

This patch adds a quirk specific to the MBP 2017 15" Retina
panel to override reported max link rate to the correct maximum
of 0xc = LINK_RATE_RBR2 to fix the darkness and reduced display
precision.

Please apply for Linux 5.6+ to avoid regressing Apple MBP panel
support.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

These are some very loud debug statements that get printed on every
vblank when driver level debug printing is enabled in DRM, and doesn't
really tell us anything that isn't related to vblanks. So let's move
this over to the proper debug flag to be a little less spammy with our
debug output.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

If "speed" is zero then we use it as a divisor to find "prescale".  It's
better to move the check for zero to the very start of the function.

Fixes: 9eeec26a ("drm/amd/display: Refine i2c frequency calculating sequence")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

These lines were accidentally indented 4 spaces more than they should
be.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We can remove the NULL check for "res_ctx" and
"res_ctx->pipe_ctx[i].stream->link".  Also it's nicer to align the
conditions using spaces so I re-indented a bit.

Longer explanation: The "res_ctx" pointer points to an address in the
middle of a struct so it can't be NULL.  For
"res_ctx->pipe_ctx[i].stream->link" we know that it is equal to "link"
and "link" is non-NULL.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix the Kconfig dependencies so that the menu is presented
correctly by adding a dependency on DRM_AMDGPU to the "menu"
Kconfig statement.  This makes a continuous dependency on
DRM_AMDGPU in the DRM AMD menus and eliminates a broken menu
structure.

Fixes: a8fe58ce ("drm/amd: add ACP driver support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: David (ChunMing) Zhou <David1.Zhou@amd.com>
Cc: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Convert the various uses of fallthrough comments to fallthrough;

Done via script
Link: https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe@perches.com/Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The automated conversion of /* fallthrough */ comments converted
a comment outside of an #ifdef/#endif case block that should be
inside the block.

Move the fallthrough inside the block to silence the warning.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Convert the various uses of fallthrough comments to fallthrough;

Done via script
Link: https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe@perches.com/Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Convert the various uses of fallthrough comments to fallthrough;

Done via script
Link: https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe@perches.com/Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix the warning
"warn: variable dereferenced before check 'obj' (see line 1131)"
by removing unnecessary checks as amdgpu_ras_debugfs_create_all()
is only called from amdgpu_debugfs_init() where obj member in
con->head list is not NULL.
Use list_for_each_entry() instead list_for_each_entry_safe() as obj
do not to be freeing or removing from list during this process.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This can fix the baco reset failure seen on Navi10.
And this should be a low risk fix as the same sequence
is already used for system suspend/resume.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

RAS support capability needs to be updated on top of different
memeory ECC enablement, and remove redundant memory ecc check
in gmc module for vega20 and arcturus.

v2: check HBM ECC enablement and set ras mask accordingly.
v3: avoid to invoke atomfirmware interface to query twice.
Suggested-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The offset into the array was specified in bytes but should
be in terms of 32-bit words.  Also prevent large reads that
would also cause a buffer overread.

v2:  Read from correct offset from internal storage buffer.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

In dcn20_funcs and dcn21_funcs struct, the member ".dsc_pg_control = NULL"
should be removed due to .dsc_pg_control be assigned to dcn20_dsc_pg_control.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

include amdgpu_ras.h head file instead of use extern
ras_debugfs_create_all function
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

disallow the logical to be enabled on platforms that
don't support gfx ras at this stage, like sriov skus,
dgpu with legacy ras.etc
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

invoking an error injection successfully will cause an at_event intterrupt that

will occur before the invoke sequence can complete causing an invalid error
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

refine the assignment for vcn.num_vcn_inst,
vcn.harvest_config, vcn.num_enc_rings in VF
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amd-drm-next-5.7-2020-03-10:

amdgpu:
- SR-IOV fixes
- Fix up fallout from drm load/unload callback removal
- Navi, renoir power management watermark fixes
- Refactor smu parameter handling
- Display FEC fixes
- Display DCC fixes
- HDCP fixes
- Add support for USB-C PD firmware updates
- Pollock detection fix
- Rework compute ring priority handling
- RAS fixes
- Misc cleanups

amdkfd:
- Consolidate more gfx config details in amdgpu
- Consolidate bo alloc flags
- Improve code comments
- SDMA MQD fixes
- Misc cleanups

gpu scheduler:
- Add suport for modifying the sched list

uapi:
- Clarify comments about GEM_CREATE flags that are not used by userspace.
  The kernel driver has always prevented userspace from using these.
  They are only used internally in the kernel driver.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310212748.4519-1-alexander.deucher@amd.com

drm-misc-next for 5.7:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:

Driver Changes:
 - fb-helper: Remove drm_fb_helper_{add,add_all,remove}_one_connector
 - fbdev: some cleanups and dead-code removal
 - Conversions to simple-encoder
 - zero-length array removal
 - Panel: panel-dpi support in panel-simple, Novatek NT35510, Elida
   KD35T133,
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200309135439.dicfnbo4ikj4tkz7@gilmour

Requested my mripard for some misc patches that need this as a base.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Some framework test will fail if enable runpm on Vega10.
Disable it untill issue fixed.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Tested-by: Kyle Chen <Kyle.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

and remove each ras IP's own debugfs creation

this is required to fix ras when the driver does not use the drm load
and unload callbacks due to ordering issues with the drm device node.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

centralize all debugfs creation in one place for ras

this is required to fix ras when the driver does not use the drm load
and unload callbacks due to ordering issues with the drm device node.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

There will be a coverity warning because min and max are both unsigned.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Only kernel bo has kfd eviction fence.
This warning is to give a notice that kfd only remove eviction fence on
individual bos.
Tested-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

ALLOC_MEM_FLAGS_* used are the same as the KFD_IOC_ALLOC_MEM_FLAGS_*,
but they are interweavedly used in kernel driver, resulting in bad
readability. For example, KFD_IOC_ALLOC_MEM_FLAGS_COHERENT is not
referenced in kernel, and it functions implicitly in kernel through
ALLOC_MEM_FLAGS_COHERENT, causing unnecessary confusion.

Replace all occurrences of ALLOC_MEM_FLAGS_* with
KFD_IOC_ALLOC_MEM_FLAGS_* to solve the problem.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

People are inclined to think of the previous pr_warn message as an
error, so use pre_debug instead.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

If there are no high priority compute queues available then set normal
priority sched array to compute_prio_sched[AMDGPU_GFX_PIPE_PRIO_HIGH]
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

AMDGPU statically sets priority for compute queues
at initialization so remove all the functions
responsible for changing compute queue priority dynamically.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Switch to appropriate sched list for an entity on priority override.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Implement drm_sched_entity_modify_sched() which modifies existing
sched_list with a different one. This is going to be helpful when
userspace changes priority of a ctx/entity then the driver can switch
to the corresponding HW scheduler list for that priority.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>