- 03 Sep, 2024 14 commits
-
-
Yang Jihong authored
when only show idle events, runtime stats of non-idle tasks is not updated, and the value is 0, there is no need to print non-idle samples. Before: # perf sched timehist -I Samples of sched_switch event do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) --------------- ------ ------------------------------ --------- --------- --------- 2090450.763235 [0000] migration/0[15] 0.000 0.000 0.000 2090450.763268 [0001] migration/1[21] 0.000 0.000 0.000 2090450.763309 [0002] migration/2[27] 0.000 0.000 0.000 2090450.763343 [0003] migration/3[33] 0.000 0.000 0.000 2090450.763469 [0004] migration/4[39] 0.000 0.000 0.000 2090450.763501 [0005] migration/5[45] 0.000 0.000 0.000 2090450.763622 [0006] migration/6[51] 0.000 0.000 0.000 2090450.763660 [0007] migration/7[57] 0.000 0.000 0.000 2090450.763741 [0009] migration/9[69] 0.000 0.000 0.000 2090450.763862 [0010] migration/10[75] 0.000 0.000 0.000 2090450.763894 [0011] migration/11[81] 0.000 0.000 0.000 2090450.764021 [0012] migration/12[87] 0.000 0.000 0.000 2090450.764056 [0013] migration/13[93] 0.000 0.000 0.000 2090450.764135 [0014] migration/14[99] 0.000 0.000 0.000 2090450.764163 [0015] migration/15[105] 0.000 0.000 0.000 2090450.764292 [0016] migration/16[111] 0.000 0.000 0.000 2090450.764371 [0017] migration/17[117] 0.000 0.000 0.000 2090450.764422 [0018] migration/18[123] 0.000 0.000 0.000 2090450.764490 [0000] <idle> 0.000 0.000 1.255 2090450.764505 [0000] s1-perf[8235/7168] 0.000 0.000 0.000 2090450.764571 [0016] <idle> 0.000 0.000 0.278 2090450.764588 [0010] <idle> 0.000 0.000 0.725 2090450.764590 [0016] s1-agent[7179/7162] 0.000 0.000 0.000 2090450.764635 [0000] <idle> 0.015 0.015 0.129 2090450.764637 [0017] <idle> 0.000 0.000 0.266 2090450.764639 [0000] s1-perf[8235/7168] 0.000 0.000 0.000 2090450.764668 [0017] s1-agent[7180/7162] 0.000 0.000 0.000 2090450.764669 [0000] <idle> 0.003 0.003 0.029 2090450.764672 [0000] s1-perf[8235/7168] 0.000 0.000 0.000 2090450.764683 [0000] <idle> 0.003 0.003 0.010 After: # perf sched timehist -I Samples of sched_switch event do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) --------------- ------ ------------------------------ --------- --------- --------- 2090450.764490 [0000] <idle> 0.000 0.000 1.255 2090450.764571 [0016] <idle> 0.000 0.000 0.278 2090450.764588 [0010] <idle> 0.000 0.000 0.725 2090450.764635 [0000] <idle> 0.015 0.015 0.129 2090450.764637 [0017] <idle> 0.000 0.000 0.266 2090450.764669 [0000] <idle> 0.003 0.003 0.029 2090450.764683 [0000] <idle> 0.003 0.003 0.010 2090450.764688 [0016] <idle> 0.019 0.019 0.097 2090450.764694 [0000] <idle> 0.001 0.001 0.009 2090450.764706 [0000] <idle> 0.001 0.001 0.010 2090450.764725 [0002] <idle> 0.000 0.000 1.415 2090450.764728 [0000] <idle> 0.002 0.002 0.019 2090450.764823 [0000] <idle> 0.003 0.003 0.091 2090450.764838 [0019] <idle> 0.000 0.000 0.154 2090450.764865 [0002] <idle> 0.109 0.109 0.029 2090450.764866 [0000] <idle> 0.012 0.012 0.030 2090450.764880 [0002] <idle> 0.013 0.013 0.001 2090450.764880 [0000] <idle> 0.002 0.002 0.011 2090450.764896 [0000] <idle> 0.001 0.001 0.013 2090450.764903 [0019] <idle> 0.063 0.063 0.002 2090450.764908 [0019] <idle> 0.003 0.003 0.001 Fixes: 07235f84 ("perf sched timehist: Add -I/--idle-hist option") Signed-off-by:Yang Jihong <yangjihong@bytedance.com> Acked-by:
Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20240812132606.3126490-1-yangjihong@bytedance.comReviewed-and-tested-by:
Madadi Vineeth Reddy <vineethr@linux.ibm.com> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Andi Kleen authored
In some situations 'perf script -F +brstackinsn' sees a lot of "not reaching sample" messages. This happens when the last LBR block before the sample contains a branch that is not in the LBR, and the instruction dumping stops. $ perf record -b emacs -Q --batch '()' [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.396 MB perf.data (443 samples) ] $ perf script -F +brstackinsn ... 00007f0ab2d171a4 insn: 41 0f 94 c0 00007f0ab2d171a8 insn: 83 fa 01 00007f0ab2d171ab insn: 74 d3 # PRED 6 cycles [313] 1.00 IPC 00007f0ab2d17180 insn: 45 84 c0 00007f0ab2d17183 insn: 74 28 ... not reaching sample ... $ perf script -F +brstackinsn | grep -c reach 136 $ This is a problem for further analysis that wants to see the full code upto the sample. There are two common cases where the message is bogus: - The LBR only logs taken branches, but the branch might be a conditional branch that is not taken (that is the most common case actually) - The LBR sampling uses a filter ignoring some branches, but the perf script check checks for all branches. This patch fixes these two conditions, by only checking for conditional branches, as well as checking the perf_event_attr's branch filter attributes. For the test case above it fixes all the messages: $ ./perf script -F +brstackinsn | grep -c reach 0 Note that there are still conditions when the message is hit -- sometimes there can be a unconditional branch that misses the LBR update before the sample -- but they are much more rare now. Signed-off-by:Andi Kleen <ak@linux.intel.com> Reviewed-by:
Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20240229161828.386397-1-ak@linux.intel.comSigned-off-by:
-
Namhyung Kim authored
The control knobs set before loading BPF programs should be declared as 'const volatile' so that it can be optimized by the BPF core. Committer testing: root@x1:~# perf record --off-cpu ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.807 MB perf.data (5645 samples) ] root@x1:~# perf evlist cpu_atom/cycles/P cpu_core/cycles/P offcpu-time dummy:u root@x1:~# perf evlist -v cpu_atom/cycles/P: type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0xa00000000, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD|IDENTIFIER, read_format: ID|LOST, disabled: 1, inherit: 1, freq: 1, precise_ip: 3, sample_id_all: 1 cpu_core/cycles/P: type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0x400000000, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD|IDENTIFIER, read_format: ID|LOST, disabled: 1, inherit: 1, freq: 1, precise_ip: 3, sample_id_all: 1 offcpu-time: type: 1 (software), size: 136, config: 0xa (PERF_COUNT_SW_BPF_OUTPUT), { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|IDENTIFIER, read_format: ID|LOST, disabled: 1, inherit: 1, freq: 1, sample_id_all: 1 dummy:u: type: 1 (software), size: 136, config: 0x9 (PERF_COUNT_SW_DUMMY), { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|IDENTIFIER, read_format: ID|LOST, inherit: 1, exclude_kernel: 1, exclude_hv: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1 root@x1:~# perf trace -e bpf --max-events 5 perf record --off-cpu 0.000 ( 0.015 ms): :2949124/2949124 bpf(cmd: 36, uattr: 0x7ffefc6dbe30, size: 8) = -1 EOPNOTSUPP (Operation not supported) 0.031 ( 0.115 ms): :2949124/2949124 bpf(cmd: PROG_LOAD, uattr: 0x7ffefc6dbb60, size: 148) = 14 0.159 ( 0.037 ms): :2949124/2949124 bpf(cmd: PROG_LOAD, uattr: 0x7ffefc6dbc20, size: 148) = 14 23.868 ( 0.144 ms): perf/2949124 bpf(cmd: PROG_LOAD, uattr: 0x7ffefc6dbad0, size: 148) = 14 24.027 ( 0.014 ms): perf/2949124 bpf(uattr: 0x7ffefc6dbc80, size: 80) = 14 root@x1:~# Signed-off-by: -
Namhyung Kim authored
The control knobs set before loading BPF programs should be declared as 'const volatile' so that it can be optimized by the BPF core. Committer testing: root@x1:~# perf lock contention --use-bpf contended total wait max wait avg wait type caller 5 31.57 us 14.93 us 6.31 us mutex btrfs_delayed_update_inode+0x43 1 16.91 us 16.91 us 16.91 us rwsem:R btrfs_tree_read_lock_nested+0x1b 1 15.13 us 15.13 us 15.13 us spinlock btrfs_getattr+0xd1 1 6.65 us 6.65 us 6.65 us rwsem:R btrfs_tree_read_lock_nested+0x1b 1 4.34 us 4.34 us 4.34 us spinlock process_one_work+0x1a9 root@x1:~# root@x1:~# perf trace -e bpf --max-events 10 perf lock contention --use-bpf 0.000 ( 0.013 ms): :2948281/2948281 bpf(cmd: 36, uattr: 0x7ffd5f12d730, size: 8) = -1 EOPNOTSUPP (Operation not supported) 0.024 ( 0.120 ms): :2948281/2948281 bpf(cmd: PROG_LOAD, uattr: 0x7ffd5f12d460, size: 148) = 16 0.158 ( 0.034 ms): :2948281/2948281 bpf(cmd: PROG_LOAD, uattr: 0x7ffd5f12d520, size: 148) = 16 26.653 ( 0.154 ms): perf/2948281 bpf(cmd: PROG_LOAD, uattr: 0x7ffd5f12d3d0, size: 148) = 16 26.825 ( 0.014 ms): perf/2948281 bpf(uattr: 0x7ffd5f12d580, size: 80) = 16 87.924 ( 0.038 ms): perf/2948281 bpf(cmd: BTF_LOAD, uattr: 0x7ffd5f12d400, size: 40) = 16 87.988 ( 0.006 ms): perf/2948281 bpf(cmd: BTF_LOAD, uattr: 0x7ffd5f12d470, size: 40) = 16 88.019 ( 0.006 ms): perf/2948281 bpf(cmd: BTF_LOAD, uattr: 0x7ffd5f12d250, size: 40) = 16 88.029 ( 0.172 ms): perf/2948281 bpf(cmd: PROG_LOAD, uattr: 0x7ffd5f12d320, size: 148) = 17 88.217 ( 0.005 ms): perf/2948281 bpf(cmd: BTF_LOAD, uattr: 0x7ffd5f12d4d0, size: 40) = 16 root@x1:~# Signed-off-by: -
Namhyung Kim authored
The control knobs set before loading BPF programs should be declared as 'const volatile' so that it can be optimized by the BPF core. Committer testing: root@x1:~# perf kwork report --use-bpf Starting trace, Hit <Ctrl+C> to stop and report ^C Kwork Name | Cpu | Total Runtime | Count | Max runtime | Max runtime start | Max runtime end | -------------------------------------------------------------------------------------------------------------------------------- (w)intel_atomic_commit_work [ | 0009 | 18.680 ms | 2 | 18.553 ms | 362410.681580 s | 362410.700133 s | (w)pm_runtime_work | 0007 | 13.300 ms | 1 | 13.300 ms | 362410.254996 s | 362410.268295 s | (w)intel_atomic_commit_work [ | 0009 | 9.846 ms | 2 | 9.717 ms | 362410.172352 s | 362410.182069 s | (w)acpi_ec_event_processor | 0002 | 8.106 ms | 1 | 8.106 ms | 362410.463187 s | 362410.471293 s | (s)SCHED:7 | 0000 | 1.351 ms | 106 | 0.063 ms | 362410.658017 s | 362410.658080 s | i915:157 | 0008 | 0.994 ms | 13 | 0.361 ms | 362411.222125 s | 362411.222486 s | (s)SCHED:7 | 0001 | 0.703 ms | 98 | 0.047 ms | 362410.245004 s | 362410.245051 s | (s)SCHED:7 | 0005 | 0.674 ms | 42 | 0.074 ms | 362411.483039 s | 362411.483113 s | (s)NET_RX:3 | 0001 | 0.556 ms | 10 | 0.079 ms | 362411.066388 s | 362411.066467 s | <SNIP> root@x1:~# perf trace -e bpf --max-events 5 perf kwork report --use-bpf 0.000 ( 0.016 ms): perf/2948007 bpf(cmd: 36, uattr: 0x7ffededa6660, size: 8) = -1 EOPNOTSUPP (Operation not supported) 0.026 ( 0.106 ms): perf/2948007 bpf(cmd: PROG_LOAD, uattr: 0x7ffededa6390, size: 148) = 12 0.152 ( 0.032 ms): perf/2948007 bpf(cmd: PROG_LOAD, uattr: 0x7ffededa6450, size: 148) = 12 26.247 ( 0.138 ms): perf/2948007 bpf(cmd: PROG_LOAD, uattr: 0x7ffededa6300, size: 148) = 12 26.396 ( 0.012 ms): perf/2948007 bpf(uattr: 0x7ffededa64b0, size: 80) = 12 Starting trace, Hit <Ctrl+C> to stop and report root@x1:~# Signed-off-by: -
Namhyung Kim authored
The control knobs set before loading BPF programs should be declared as 'const volatile' so that it can be optimized by the BPF core. Committer testing: root@x1:~# perf ftrace latency --use-bpf -T schedule ^C# DURATION | COUNT | GRAPH | 0 - 1 us | 0 | | 1 - 2 us | 0 | | 2 - 4 us | 0 | | 4 - 8 us | 0 | | 8 - 16 us | 1 | | 16 - 32 us | 5 | | 32 - 64 us | 2 | | 64 - 128 us | 6 | | 128 - 256 us | 7 | | 256 - 512 us | 5 | | 512 - 1024 us | 22 | # | 1 - 2 ms | 36 | ## | 2 - 4 ms | 68 | ##### | 4 - 8 ms | 22 | # | 8 - 16 ms | 91 | ####### | 16 - 32 ms | 11 | | 32 - 64 ms | 26 | ## | 64 - 128 ms | 213 | ################# | 128 - 256 ms | 19 | # | 256 - 512 ms | 14 | # | 512 - 1024 ms | 5 | | 1 - ... s | 8 | | root@x1:~# root@x1:~# perf trace -e bpf perf ftrace latency --use-bpf -T schedule 0.000 ( 0.015 ms): perf/2944525 bpf(cmd: 36, uattr: 0x7ffe80de7b40, size: 8) = -1 EOPNOTSUPP (Operation not supported) 0.025 ( 0.102 ms): perf/2944525 bpf(cmd: PROG_LOAD, uattr: 0x7ffe80de7870, size: 148) = 8 0.136 ( 0.026 ms): perf/2944525 bpf(cmd: PROG_LOAD, uattr: 0x7ffe80de7930, size: 148) = 8 0.174 ( 0.026 ms): perf/2944525 bpf(cmd: PROG_LOAD, uattr: 0x7ffe80de77e0, size: 148) = 8 0.205 ( 0.010 ms): perf/2944525 bpf(uattr: 0x7ffe80de7990, size: 80) = 8 0.227 ( 0.011 ms): perf/2944525 bpf(cmd: BTF_LOAD, uattr: 0x7ffe80de7810, size: 40) = 8 0.244 ( 0.004 ms): perf/2944525 bpf(cmd: BTF_LOAD, uattr: 0x7ffe80de7880, size: 40) = 8 0.257 ( 0.006 ms): perf/2944525 bpf(cmd: BTF_LOAD, uattr: 0x7ffe80de7660, size: 40) = 8 0.265 ( 0.058 ms): perf/2944525 bpf(cmd: PROG_LOAD, uattr: 0x7ffe80de7730, size: 148) = 9 0.330 ( 0.004 ms): perf/2944525 bpf(cmd: BTF_LOAD, uattr: 0x7ffe80de78e0, size: 40) = 8 0.337 ( 0.003 ms): perf/2944525 bpf(cmd: BTF_LOAD, uattr: 0x7ffe80de7890, size: 40) = 8 0.343 ( 0.004 ms): perf/2944525 bpf(cmd: BTF_LOAD, uattr: 0x7ffe80de7880, size: 40) = 8 0.349 ( 0.003 ms): perf/2944525 bpf(cmd: BTF_LOAD, uattr: 0x7ffe80de78b0, size: 40) = 8 0.355 ( 0.004 ms): perf/2944525 bpf(cmd: BTF_LOAD, uattr: 0x7ffe80de7890, size: 40) = 8 0.361 ( 0.003 ms): perf/2944525 bpf(cmd: BTF_LOAD, uattr: 0x7ffe80de78b0, size: 40) = 8 0.367 ( 0.003 ms): perf/2944525 bpf(cmd: BTF_LOAD, uattr: 0x7ffe80de7880, size: 40) = 8 0.373 ( 0.014 ms): perf/2944525 bpf(cmd: BTF_LOAD, uattr: 0x7ffe80de7a00, size: 40) = 8 0.390 ( 0.358 ms): perf/2944525 bpf(uattr: 0x7ffe80de7950, size: 80) = 9 0.763 ( 0.014 ms): perf/2944525 bpf(uattr: 0x7ffe80de7950, size: 80) = 9 0.783 ( 0.011 ms): perf/2944525 bpf(uattr: 0x7ffe80de7950, size: 80) = 9 0.798 ( 0.017 ms): perf/2944525 bpf(uattr: 0x7ffe80de7950, size: 80) = 9 0.819 ( 0.003 ms): perf/2944525 bpf(uattr: 0x7ffe80de7700, size: 80) = 9 0.824 ( 0.047 ms): perf/2944525 bpf(cmd: PROG_LOAD, uattr: 0x7ffe80de76c0, size: 148) = 10 0.878 ( 0.008 ms): perf/2944525 bpf(uattr: 0x7ffe80de7950, size: 80) = 9 0.891 ( 0.014 ms): perf/2944525 bpf(cmd: MAP_UPDATE_ELEM, uattr: 0x7ffe80de79e0, size: 32) = 0 0.910 ( 0.103 ms): perf/2944525 bpf(cmd: PROG_LOAD, uattr: 0x7ffe80de7880, size: 148) = 9 1.016 ( 0.143 ms): perf/2944525 bpf(cmd: PROG_LOAD, uattr: 0x7ffe80de7880, size: 148) = 10 3.777 ( 0.068 ms): perf/2944525 bpf(cmd: PROG_LOAD, uattr: 0x7ffe80de7570, size: 148) = 12 3.848 ( 0.003 ms): perf/2944525 bpf(cmd: LINK_CREATE, uattr: 0x7ffe80de7550, size: 64) = -1 EBADF (Bad file descriptor) 3.859 ( 0.006 ms): perf/2944525 bpf(cmd: LINK_CREATE, uattr: 0x7ffe80de77c0, size: 64) = 12 6.504 ( 0.010 ms): perf/2944525 bpf(cmd: LINK_CREATE, uattr: 0x7ffe80de77c0, size: 64) = 14 ^C# DURATION | COUNT | GRAPH | 0 - 1 us | 0 | | 1 - 2 us | 0 | | 2 - 4 us | 1 | | 4 - 8 us | 3 | | 8 - 16 us | 3 | | 16 - 32 us | 11 | | 32 - 64 us | 9 | | 64 - 128 us | 17 | | 128 - 256 us | 30 | # | 256 - 512 us | 20 | | 512 - 1024 us | 42 | # | 1 - 2 ms | 151 | ###### | 2 - 4 ms | 106 | #### | 4 - 8 ms | 18 | | 8 - 16 ms | 149 | ###### | 16 - 32 ms | 30 | # | 32 - 64 ms | 17 | | 64 - 128 ms | 360 | ############### | 128 - 256 ms | 52 | ## | 256 - 512 ms | 18 | | 512 - 1024 ms | 28 | # | 1 - ... s | 5 | | root@x1:~# Signed-off-by: -
Namhyung Kim authored
The control knobs set before loading BPF programs should be declared as 'const volatile' so that it can be optimized by the BPF core. Committer testing: root@x1:~# perf stat --bpf-counters -e cpu_core/cycles/,cpu_core/instructions/ sleep 1 Performance counter stats for 'sleep 1': 2,442,583 cpu_core/cycles/ 2,494,425 cpu_core/instructions/ 1.002687372 seconds time elapsed 0.001126000 seconds user 0.001166000 seconds sys root@x1:~# perf trace -e bpf --max-events 10 perf stat --bpf-counters -e cpu_core/cycles/,cpu_core/instructions/ sleep 1 0.000 ( 0.019 ms): perf/2944119 bpf(cmd: OBJ_GET, uattr: 0x7fffdf5cdd40, size: 20) = 5 0.021 ( 0.002 ms): perf/2944119 bpf(cmd: OBJ_GET_INFO_BY_FD, uattr: 0x7fffdf5cdcd0, size: 16) = 0 0.030 ( 0.005 ms): perf/2944119 bpf(cmd: MAP_LOOKUP_ELEM, uattr: 0x7fffdf5ceda0, size: 32) = 0 0.037 ( 0.004 ms): perf/2944119 bpf(cmd: LINK_GET_FD_BY_ID, uattr: 0x7fffdf5ced80, size: 12) = -1 ENOENT (No such file or directory) 0.189 ( 0.004 ms): perf/2944119 bpf(cmd: 36, uattr: 0x7fffdf5cec10, size: 8) = -1 EOPNOTSUPP (Operation not supported) 0.201 ( 0.095 ms): perf/2944119 bpf(cmd: PROG_LOAD, uattr: 0x7fffdf5ce940, size: 148) = 10 0.305 ( 0.026 ms): perf/2944119 bpf(cmd: PROG_LOAD, uattr: 0x7fffdf5cea00, size: 148) = 10 0.347 ( 0.012 ms): perf/2944119 bpf(cmd: BTF_LOAD, uattr: 0x7fffdf5ce8e0, size: 40) = 10 0.364 ( 0.004 ms): perf/2944119 bpf(cmd: BTF_LOAD, uattr: 0x7fffdf5ce950, size: 40) = 10 0.376 ( 0.006 ms): perf/2944119 bpf(cmd: BTF_LOAD, uattr: 0x7fffdf5ce730, size: 40) = 10 root@x1:~# Performance counter stats for 'sleep 1': 271,221 cpu_core/cycles/ 139,150 cpu_core/instructions/ 1.002881677 seconds time elapsed 0.001318000 seconds user 0.001314000 seconds sys root@x1:~# Signed-off-by: -
Ian Rogers authored
i386 only supports watchpoints up to size 4, 8 bytes causes extra counts and test failures. Signed-off-by:
Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com> Cc: Colin Ian King <colin.i.king@gmail.com> Cc: David Ahern <dsa@cumulusnetworks.com> Cc: Dominique Martinet <asmadeus@codewreck.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Junhao He <hejunhao3@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yang Jihong <yangjihong@bytedance.com> Link: https://lore.kernel.org/r/20240831070415.506194-7-irogers@google.comSigned-off-by:
-
Ian Rogers authored
The probe command is dependent on libelf. Skip the test if the required probe command isn't present. Signed-off-by:
-
Ian Rogers authored
The "time utils" test fails in 32-bit builds: ... parse_nsec_time("18446744073.709551615") Failed. ptime 4294967295709551615 expected 18446744073709551615 ... Switch strtoul to strtoull as an unsigned long in 32-bit build isn't 64-bits. Fixes: c284d669 ("perf tools: Move parse_nsec_time to time-utils.c") Signed-off-by: -
Ian Rogers authored
The hex PMU suffix maybe 64-bit but the comparisons were "unsigned long" or 32-bit on 32-bit systems. This was causing the "PMU name comparison" test to fail in a 32-bit build. Signed-off-by:
-
Steinar H. Gunderson authored
Support using LLVM as a disassembler method, allowing helperless annotation in non-distro builds. (It is also much faster than using libbfd or bfd objdump on binaries with a lot of debug information.) This is nearly identical to the output of llvm-objdump; there are some very rare whitespace differences, some minor changes to demangling (since we use perf's regular demangling and not LLVM's own) and the occasional case where llvm-objdump makes a different choice when multiple symbols share the same address. It should work across all of LLVM's supported architectures, although I've only tested 64-bit x86, and finding the right triple from perf's idea of machine architecture can sometimes be a bit tricky. Ideally, we should have some way of finding the triplet just from the file itself. Committer notes: Address this on 32-bit systems by using PRIu64 from inttypes.h 3 17.58 almalinux:9-i386 : FAIL gcc version 11.4.1 20231218 (Red Hat 11.4.1-3) (GCC) util/llvm-c-helpers.cpp: In function ‘char* make_symbol_relative_string(dso*, const char*, u64, u64)’: util/llvm-c-helpers.cpp:150:52: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 5 has type ‘u64’ {aka +‘long long unsigned int’} [-Werror=format=] 150 | snprintf(buf, sizeof(buf), "%s+0x%lx", | ~~^ | | | long unsigned int | %llx 151 | demangled ? demangled : sym_name, addr - base_addr); | ~~~~~~~~~~~~~~~~ | | | u64 {aka long long unsigned int} cc1plus: all warnings being treated as errors Signed-off-by:Steinar H. Gunderson <sesse@google.com> Cc: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20240803152008.2818485-3-sesse@google.comSigned-off-by:
-
Steinar H. Gunderson authored
The Capstone disassembler code has a useful code snippet to read the bytes for a given code symbol into memory. Split it out into its own function, so that the LLVM disassembler can use it in the next patch. Signed-off-by:
-
Steinar H. Gunderson authored
In addition to the existing support for libbfd and calling out to an external addr2line command, add support for using libllvm directly. This is both faster than libbfd, and can be enabled in distro builds (the LLVM license has an explicit provision for GPLv2 compatibility). Thus, it is set as the primary choice if available. As an example, running 'perf report' on a medium-size profile with DWARF-based backtraces took 58 seconds with LLVM, 78 seconds with libbfd, 153 seconds with external llvm-addr2line, and I got tired and aborted the test after waiting for 55 minutes with external bfd addr2line (which is the default for perf as compiled by distributions today). Evidently, for this case, the bfd addr2line process needs 18 seconds (on a 5.2 GHz Zen 3) to load the .debug ELF in question, hits the 1-second timeout and gets killed during initialization, getting restarted anew every time. Having an in-process addr2line makes this much more robust. As future extensions, libllvm can be used in many other places where we currently use libbfd or other libraries: - Symbol enumeration (in particular, for PE binaries). - Demangling (including non-Itanium demangling, e.g. Microsoft or Rust). - Disassembling (perf annotate). However, these are much less pressing; most people don't profile PE binaries, and perf has non-bfd paths for ELF. The same with demangling; the default _cxa_demangle path works fine for most users, and while bfd objdump can be slow on large binaries, it is possible to use --objdump=llvm-objdump to get the speed benefits. (It appears LLVM-based demangling is very simple, should we want that.) Tested with LLVM 14, 15, 16, 18 and 19. For some reason, LLVM 12 was not correctly detected using feature_check, and thus was not tested. Committer notes: Added the name and a __maybe_unused to address: 1 13.50 almalinux:8 : FAIL gcc version 8.5.0 20210514 (Red Hat 8.5.0-22) (GCC) util/srcline.c: In function 'dso__free_a2l': util/srcline.c:184:20: error: parameter name omitted void dso__free_a2l(struct dso *) ^~~~~~~~~~~~ make[3]: *** [/git/perf-6.11.0-rc3/tools/build/Makefile.build:158: util] Error 2 Signed-off-by:
-
- 02 Sep, 2024 1 commit
-
-
Arnaldo Carvalho de Melo authored
To remove one more use of the audit libs and address a problem reported with a recent change where a function isn't available when using the audit libs method, that should really go away, this being one step in that direction. The script used to generate the 64-bit syscall table was already parametrized to generate for both 64-bit and 32-bit, so just use it and wire the generated table to the syscalltbl.c routines. Reported-by:
Jiri Slaby <jirislaby@kernel.org> Suggested-by:
-
- 30 Aug, 2024 8 commits
-
-
Yang Jihong authored
If sched_in event for current task is not recorded, sched_in timestamp will be set to end_time of time window interest, causing an error in timestamp show. In this case, we choose to ignore this event. Test scenario: perf[1229608] does not record the first sched_in event, run time and sch delay are both 0 # perf sched timehist Samples of sched_switch event do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) --------------- ------ ------------------------------ --------- --------- --------- 2090450.763231 [0000] perf[1229608] 0.000 0.000 0.000 2090450.763235 [0000] migration/0[15] 0.000 0.001 0.003 2090450.763263 [0001] perf[1229608] 0.000 0.000 0.000 2090450.763268 [0001] migration/1[21] 0.000 0.001 0.004 2090450.763302 [0002] perf[1229608] 0.000 0.000 0.000 2090450.763309 [0002] migration/2[27] 0.000 0.001 0.007 2090450.763338 [0003] perf[1229608] 0.000 0.000 0.000 2090450.763343 [0003] migration/3[33] 0.000 0.001 0.004 Before: arbitrarily specify a time window of interest, timestamp will be set to an incorrect value # perf sched timehist --time 100,200 Samples of sched_switch event do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) --------------- ------ ------------------------------ --------- --------- --------- 200.000000 [0000] perf[1229608] 0.000 0.000 0.000 200.000000 [0001] perf[1229608] 0.000 0.000 0.000 200.000000 [0002] perf[1229608] 0.000 0.000 0.000 200.000000 [0003] perf[1229608] 0.000 0.000 0.000 200.000000 [0004] perf[1229608] 0.000 0.000 0.000 200.000000 [0005] perf[1229608] 0.000 0.000 0.000 200.000000 [0006] perf[1229608] 0.000 0.000 0.000 200.000000 [0007] perf[1229608] 0.000 0.000 0.000 After: # perf sched timehist --time 100,200 Samples of sched_switch event do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) --------------- ------ ------------------------------ --------- --------- --------- Fixes: 853b7407 ("perf sched timehist: Add option to specify time window of interest") Signed-off-by: -
Namhyung Kim authored
The spinlock and rwlock use a single-element per-cpu array to track current locks due to performance reason. But this means the key is always available and it cannot simply account lock stats in the array because some of them are invalid. In fact, the contention_end() program in the BPF invalidates the entry by setting the 'lock' value to 0 instead of deleting the entry for the hashmap. So it should skip entries with the lock value of 0 in the account_end_timestamp(). Otherwise, it'd have spurious high contention on an idle machine: $ sudo perf lock con -ab -Y spinlock sleep 3 contended total wait max wait avg wait type caller 8 4.72 s 1.84 s 590.46 ms spinlock rcu_core+0xc7 8 1.87 s 1.87 s 233.48 ms spinlock process_one_work+0x1b5 2 1.87 s 1.87 s 933.92 ms spinlock worker_thread+0x1a2 3 1.81 s 1.81 s 603.93 ms spinlock tmigr_update_events+0x13c 2 1.72 s 1.72 s 861.98 ms spinlock tick_do_update_jiffies64+0x25 6 42.48 us 13.02 us 7.08 us spinlock futex_q_lock+0x2a 1 13.03 us 13.03 us 13.03 us spinlock futex_wake+0xce 1 11.61 us 11.61 us 11.61 us spinlock rcu_core+0xc7 I don't believe it has contention on a spinlock longer than 1 second. After this change, it only reports some small contentions. $ sudo perf lock con -ab -Y spinlock sleep 3 contended total wait max wait avg wait type caller 4 133.51 us 43.29 us 33.38 us spinlock tick_do_update_jiffies64+0x25 4 69.06 us 31.82 us 17.27 us spinlock process_one_work+0x1b5 2 50.66 us 25.77 us 25.33 us spinlock rcu_core+0xc7 1 28.45 us 28.45 us 28.45 us spinlock rcu_core+0xc7 1 24.77 us 24.77 us 24.77 us spinlock tmigr_update_events+0x13c 1 23.34 us 23.34 us 23.34 us spinlock raw_spin_rq_lock_nested+0x15 Fixes: b5711042 ("perf lock contention: Use per-cpu array map for spinlocks") Reported-by:Xi Wang <xii@google.com> Signed-off-by:
-
Namhyung Kim authored
When it updates the lock stat for the first time, it needs to create an element in the BPF hash map. But if there's a concurrent thread waiting for the same lock (like for rwsem or rwlock), it might race with the thread and possibly fail to update with -EEXIST. In that case, it can lookup the map again and put the data there instead of failing. Signed-off-by:
-
Namhyung Kim authored
The LCB_F_SPIN bit is used for spinlock, rwlock and optimistic spinning in mutex. In get_tstamp_elem() it needs to check spinlock and rwlock only. As mutex sets the LCB_F_MUTEX, it can check those two bits and reduce the number of operations. Signed-off-by:
-
Namhyung Kim authored
It has some duplicate codes to do the same job. Let's add a label and goto there to handle errors in a single place. Signed-off-by:
-
Ian Rogers authored
Additional pipe tests where piped files are written to disk. This means that spotting a file name of "-" isn't a sufficient "is pipe?" test. Signed-off-by:
-
Ian Rogers authored
No longer used by `perf inject` the repipe_fd is always -1 and repipe is always false. Remove the options and associated code knowing the constant values of the removed variables. Signed-off-by:
-
Ian Rogers authored
Previously inject->is_pipe was set if the input or output were a pipe. Determining the input was a pipe had to be done prior to starting the session and opening the file. This was done by comparing the input file name with '-' but it fails if the pipe file is written to disk. Opening a pipe file from disk will correctly set perf_data.is_pipe, but this is too late for 'perf inject' and results in a broken file. A workaround is 'cat pipe_perf|perf inject -i - ...'. This change removes inject->is_pipe and changes the dependent conditions to use the is_pipe flag on the input (inject->session->data) and output files (inject->output). This ensures the is_pipe condition reflects things like the header being read. The change removes the use of perf file header repiping, that is writing the file header out while reading it in. The case of input pipe and output file cannot repipe as the attributes for the file are unknown. To resolve this, write the file header when writing to disk and as the attributes may be unknown, write them after the data. Update sessions repipe variable to be trace_event_repipe as those are the only events now impacted by it. Update __perf_session__new as the repipe_fd no longer needs passing. Fully removing repipe from session header reading will be done in a later change. Committer testing: root@number:~# perf record -e syscalls:sys_enter_*sleep/max-stack=4/ -o - sleep 0.01 | perf report -i - # To display the perf.data header info, please use --header/--header-only options. # [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.050 MB - ] # # Total Lost Samples: 0 # # Samples: 1 of event 'syscalls:sys_enter_clock_nanosleep' # Event count (approx.): 1 # # Overhead Command Shared Object Symbol # ........ ....... ............. ............................... # 100.00% sleep libc.so.6 [.] clock_nanosleep@GLIBC_2.2.5 | ---__libc_start_main@@GLIBC_2.34 __libc_start_call_main 0x562fc2560a9f clock_nanosleep@GLIBC_2.2.5 # # (Tip: Create an archive with symtabs to analyse on other machine: perf archive) # root@number:~# perf record -e syscalls:sys_enter_*sleep/max-stack=4/ -o - sleep 0.01 > pipe.data [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.050 MB - ] root@number:~# perf report --stdio -i pipe.data # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 1 of event 'syscalls:sys_enter_clock_nanosleep' # Event count (approx.): 1 # # Overhead Command Shared Object Symbol # ........ ....... ............. ............................... # 100.00% sleep libc.so.6 [.] clock_nanosleep@GLIBC_2.2.5 | ---__libc_start_main@@GLIBC_2.34 __libc_start_call_main 0x55f775975a9f clock_nanosleep@GLIBC_2.2.5 # # (Tip: To set sampling period of individual events use perf record -e cpu/cpu-cycles,period=100001/,cpu/branches,period=10001/ ...) # root@number:~# Signed-off-by:
-
- 29 Aug, 2024 12 commits
-
-
Ian Rogers authored
With a file, to write data an offset needs to be known. Typically data follows the event attributes in a file. However, if processing a pipe the number of event attributes may not be known. It is convenient in that case to write the attributes after the data. Expand perf_session__do_write_header() to allow this when the data offset and size are known. This approach may be useful for more than just taking a pipe file to write into a data file, `perf inject --itrace` will reserve and additional 8kb for attributes, which would be unnecessary if the attributes were written after the data. Signed-off-by:
-
Ian Rogers authored
Buggy perf.data files can have the attributes and data overlapping. For example, when processing pipe data the attributes aren't known and so file offset header calculations can consider them not present. Later this can cause the attributes to overwrite the data. This can be seen in: $ perf record -o - true > a.data [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.059 MB - ] $ perf inject -i a.data -o b.data $ perf report --stats -i b.data 0x68 [0]: failed to process type: 510379 [Invalid argument] Error: failed to process sample $ This change makes reading the corrupt file fail: $ perf report --stats -i b.data Perf file header corrupt: Attributes and data overlap incompatible file format (rerun with -v to learn more) $ Which is more informative. Signed-off-by:
-
Ian Rogers authored
Some of the values are a little strange so add documentation to resolve ambiguity. Signed-off-by:
-
Ian Rogers authored
perf_session is a central data structure to the tool so let's comment it. The auxtrace callbacks are never modified in session so constify. Signed-off-by:
-
James Clark authored
Now that we have overlapping trace IDs it's also useful to know what the queue number is to be able to distinguish the source of the trace so print it inline. Hide it behind the -v option because it might not be obvious to users what the queue number is. Reviewed-by:
Mike Leach <mike.leach@linaro.org> Signed-off-by:
James Clark <james.clark@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linux.dev> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20240722101202.26915-8-james.clark@linaro.orgSigned-off-by:
James Clark <james.clark@linaro.org> Signed-off-by:
-
James Clark authored
v0.1 HW_ID packets have a new field that describes which sink each CPU writes to. Use the sink ID to link trace ID maps to each other so that mappings are shared wherever the sink is shared. Also update the error message to show that overlapping IDs aren't an error in per-thread mode, just not supported. In the future we can use the CPU ID from the AUX records, or watch for changing sink IDs on HW_ID packets to use the correct decoders. Reviewed-by:
-
James Clark authored
This isn't a bug because Perf always masks with CORESIGHT_TRACE_ID_VAL_MASK before using these values, but to avoid it looking like it could be, make an effort to not save bad values. Reviewed-by:
-
James Clark authored
Now that each queue has a unique set of trace ID mappings, use this list to create the decoders. In unformatted mode just add a single mapping so only one decoder is made. Previously each queue would have a decoder created for each traced CPU on the system but this won't work anymore because CPUs can have overlapping trace IDs. This also means that the CORESIGHT_TRACE_ID_UNUSED_FLAG isn't needed any more. If mappings aren't added then decoders aren't created, rather than needing a flag to suppress creation. Reviewed-by:
-
James Clark authored
The global list won't work for per-sink trace ID allocations, so put a list in each queue where the IDs will be unique to that queue. To keep the same behavior as before, for version 0 of the HW_ID packets, copy all the HW_ID mappings into all queues. This change doesn't effect the decoders, only trace ID lookups on the Perf side. The decoders are still created with global mappings which will be fixed in a later commit. Reviewed-by:
-
James Clark authored
Make cs_etm__setup_queue() setup a queue even if it's empty, and pre-allocate queues based on the max CPU that was recorded. In per-CPU mode aux queues are indexed based on CPU ID even if all CPUs aren't recorded, sparse queue arrays aren't used. This will allow HW_IDs to be saved even if no aux data was received in that queue without having to call cs_etm__setup_queue() from two different places. Reviewed-by:
-
James Clark authored
Both of these passes gather information about how to create the decoders. AUX records determine formatted/unformatted, and the HW_IDs determine the traceID/metadata mappings. Therefore it makes sense to cache the information and wait until both passes are over until creating the decoders, rather than creating them at the first HW_ID found. This will allow a simplification of the creation process where cs_etm_queue->traceid_list will exclusively used to create the decoders, rather than the current two methods depending on whether the trace is formatted or not. Previously the sample CPU from the AUX record was used to initialize the decoder CPU, but actually sample CPU == AUX queue index in per-CPU mode, so saving the sample CPU isn't required. Similarly formatted/unformatted was used upfront to create the decoders, but now it's cached until later. Reviewed-by:
Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by:
Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com> Tested-by:
Leo Yan <leo.yan@arm.com> Acked-by:
Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linux.dev> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20240722101202.26915-2-james.clark@linaro.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
Revert "tools build: Remove leftover libcap tests that prevents fast path feature detection from working" Ian pointed out that the libcap feature test is also used by bpftool, so we can't remove it just because perf stopped using it, revert the removal of the feature test. Since both perf and libcap uses the fast path feature detection (tools/build/feature/test-all.c), probably the best thing is to keep libcap-devel when building perf even it not being used there. This reverts commit 47b3b643. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by:
-
- 28 Aug, 2024 5 commits
-
-
Arnaldo Carvalho de Melo authored
I noticed that the fast path feature detection was failing: $ cat /tmp/build/perf-tools-next/feature/test-all.make.output /usr/bin/ld: cannot find -lcap: No such file or directory collect2: error: ld returned 1 exit status $ The patch removing the dependency (Fixes tag below) didn't remove the detection of libcap, and as the fast path feature detection (test-all.c) had -lcap in its Makefile link list of libraries to link, it was failing when libcap-devel is not available, fix it by removing those leftover files. Fixes: e25ebda7 ("perf cap: Tidy up and improve capability testing") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/Zs-gjOGFWtAvIZit@x1Signed-off-by:
-
Namhyung Kim authored
$ sudo ./perf test filtering -vv 96: perf record sample filtering (by BPF) tests: --- start --- test child forked, pid 2966908 Checking BPF-filter privilege Basic bpf-filter test Basic bpf-filter test [Success] Failing bpf-filter test Failing bpf-filter test [Success] Group bpf-filter test Group bpf-filter test [Success] Multiple bpf-filter test Multiple bpf-filter test [Success] Cgroup bpf-filter test Cgroup bpf-filter test [Success] ---- end(0) ---- 96: perf record sample filtering (by BPF) tests : Ok Signed-off-by:
-
Namhyung Kim authored
The new cgroup filter can take either of '==' or '!=' operator and a pathname for the target cgroup. $ perf record -a --all-cgroups -e cycles --filter 'cgroup == /abc/def' -- sleep 1 Users should have --all-cgroups option in the command line to enable cgroup filtering. Technically it doesn't need to have the option as it can get the current task's cgroup info directly from BPF. But I want to follow the convention for the other sample info. Signed-off-by:
-
Namhyung Kim authored
The flex and bison files need to be recompiled when one of these header filters are changed. * util/bpf-filter.h * util/bpf_skel/sample-filter.h Signed-off-by:
-
Namhyung Kim authored
The fields in the hist_entry are filled on-demand which means they only have meaningful values when relevant sort keys are used. So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in the hist entry can be garbage. So it shouldn't access it unconditionally. I got a segfault, when I wanted to see cgroup profiles. $ sudo perf record -a --all-cgroups --synth=cgroup true $ sudo perf report -s cgroup Program received signal SIGSEGV, Segmentation fault. 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 48 return RC_CHK_ACCESS(map)->dso; (gdb) bt #0 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 #1 0x00005555557aa39b in map__load (map=0x0) at util/map.c:344 #2 0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385 #3 0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true) at util/hist.c:644 #4 0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761 #5 0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779 #6 0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015 #7 0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0) at util/hist.c:1260 #8 0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at builtin-report.c:334 #9 0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232 #10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128, sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271 #11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354 #12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132 #13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245 #14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324 #15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342 #16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60) at util/session.c:780 #17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688, file_path=0x555556038ff0 "perf.data") at util/session.c:1406 As you can see the entry->ms.map was NULL even if he->ms.map has a value. This is because 'sym' sort key is not given, so it cannot assume whether he->ms.sym and entry->ms.sym is the same. I only checked the 'sym' sort key here as it implies 'dso' behavior (so maps are the same). Fixes: ac01c8c4 ("perf hist: Update hist symbol when updating maps") Signed-off-by:
-
