- 27 Jul, 2023 27 commits
-
-
Biju Das authored
Drop enum pcf85063_type and split the array pcf85063_cfg[] as individual variables, and make lines shorter by referring to e.g. &pcf85063_cfg instead of &pcf85063_cfg[PCF85063]. Suggested-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230717124059.196244-3-biju.das.jz@bp.renesas.comSigned-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com>
-
Biju Das authored
The pcf85063_ids[].driver_data could store a pointer to the config, like for DT-based matching, making I2C and DT-based matching more similar. After that, we can simplify the probe() by replacing of_device_get_ match_data() and i2c_match_id() by i2c_get_match_data() as we have similar I2C and DT-based matching table. Signed-off-by:
-
Biju Das authored
Simplify the probe() by replacing of_device_get_match_data() and i2c_match_id() by i2c_get_match_data() as we have similar I2C and DT-based matching table. Signed-off-by:
-
Valentin Caron authored
Fix a few style issues reported by checkpatch.pl: - Unnecessary parentheses - Lines should not end with a '(' Signed-off-by:Valentin Caron <valentin.caron@foss.st.com> Link: https://lore.kernel.org/r/20230705174357.353616-8-valentin.caron@foss.st.comSigned-off-by:
-
Valentin Caron authored
stm32_rtc_valid_alrm function has some issues : - arithmetical operations are impossible on BCD values - "cur_mon + 1" can overflow - the use case with the next month, the same day/hour/minutes went wrong To solve that, we prefer to use timestamp comparison. e.g. : On 5 Dec. 2021, the alarm limit is 5 Jan. 2022 (+31 days) On 31 Jan 2021, the alarm limit is 28 Feb. 2022 (+28 days) Signed-off-by: -
Gabriel Fernandez authored
The RTC driver stops the RTCAPB clock during suspend, but the irq handler from RTC is called before starting clock. Then we are blocked while accessing RTC registers. We changes PM callbacks to '_no_irq()' to disable irq during resume callback and so irq handler will be called after the enable of RTCAPB clock. Signed-off-by:
Gabriel Fernandez <gabriel.fernandez@foss.st.com> Signed-off-by:
-
Valentin Caron authored
Change stm32-rtc driver to not generate an error message when device probe operation is deferred for a clock. Signed-off-by:
Etienne Carriere <etienne.carriere@foss.st.com> Signed-off-by:
-
Christophe Guibout authored
The rtc is used to update the stgen counter on wake up from low power modes, so it needs to be as much accurate as possible. The maximization of asynchronous divider leads to a 4ms rtc precision clock. By decreasing pred_a to 0, it will have pred_s=32767 (when need_accuracy is true), so stgen clock becomes more accurate with 30us precision. Nevertheless this will leads to an increase of power consumption. Signed-off-by:
Christophe Guibout <christophe.guibout@foss.st.com> Signed-off-by:
-
Antonio Borneo authored
RTC counters are stopped when INIT bit in ISR register is set and start counting from the (eventual) new value when INIT is reset. In stm32_rtc_init(), called during probe, the INIT bit is set to program the prescaler and the 24h mode. This halts the RTC counter at each probe tentative causing the RTC time to loose from 0.3s to 0.8s at each kernel boot. If the RTC is battery powered, both prescaler value and 24h mode are kept during power cycle and there is no need to program them again. Check if the desired prescaler value and the 24h mode are already programmed, then skip reprogramming them to avoid halting the time counter. Signed-off-by:
Antonio Borneo <antonio.borneo@foss.st.com> Signed-off-by:
-
Antonio Borneo authored
Date and time are read from two separate RTC registers. To ensure consistency between the two registers, reading the time register locks the values in the shadow date register until the date register is read. Thus, the whole date/time read requires reading the time register first, followed by reading the date register. If the reads are done in reversed order, the shadow date register will remain locked until a future read operation. The future read will read the former date value that could be already invalid. Fix the read order of date/time registers in stm32_rtc_valid_alrm() Signed-off-by:
-
Hugo Villeneuve authored
Add support for new NXP RTC PCF2131. Signed-off-by:
Hugo Villeneuve <hvilleneuve@dimonoff.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230622145800.2442116-18-hugo@hugovil.comSigned-off-by:
-
Hugo Villeneuve authored
The PCF2127/29 do NOT support alarms with a 1 second resolution, but the PCF2131 does. Signed-off-by:
-
Hugo Villeneuve authored
The watchdog value register cannot be read on the PCF2131 after being set. Add a new flag to identify which variant has read access to this register, and use this flag to selectively test if watchdog timer was started by bootloader. Signed-off-by:
Bruno Thomsen <bruno.thomsen@gmail.com> Link: https://lore.kernel.org/r/20230622145800.2442116-16-hugo@hugovil.comSigned-off-by:
-
Hugo Villeneuve authored
Introduce in the configuration structure two new values to hold the watchdog clock source and the min_hw_heartbeat_ms value. The minimum and maximum timeout values are automatically computed from the watchdog clock source value for each variant. The PCF2131 has no 1Hz watchdog clock source, as is the case for PCF2127/29. The next best choice is using a 1/4Hz clock, giving a watchdog timeout range between 4 and 1016s. By using the same register configuration as for the PCF2127/29, the 1/4Hz clock source is selected. Note: the PCF2127 datasheet gives a min/max range between 1 and 255s, but it should be between 2 and 254s, because the watchdog is triggered when the timer value reaches 1, not 0. Signed-off-by:
-
Hugo Villeneuve authored
The sequence for updating the time/date registers is slightly different between PCF2127/29 and PCF2131. For PCF2127/29, during write operations, the time counting circuits (memory locations 03h through 09h) are automatically blocked. For PCF2131, time/date registers write access requires setting the STOP bit and sending the clear prescaler instruction (CPR). STOP then needs to be released once write operation is completed. Signed-off-by:
-
Hugo Villeneuve authored
The PCF2127 and PCF2129 have one output interrupt pin. The PCF2131 has two, named INT_A and INT_B. The hardware support that any interrupt source can be routed to either one or both of them. Force all interrupt sources to go to the INT A pin. Support to route any interrupt source to INT A/B pins is not supported by this driver at the moment. Signed-off-by:
-
Hugo Villeneuve authored
This RTC is very similar in functionality to the PCF2127/29. Basically it: -supports two new control registers at offsets 4 and 5 -supports a new reset register (not implemented in this driver) -supports 4 tamper detection functions instead of 1 -has no nvmem (like the PCF2129) -has two output interrupt pins Because of that, most of the register addresses are very different, although they still follow the same layout. For example, the tamper registers have a different base address, but the offsets are all the same. Signed-off-by:
-
Hugo Villeneuve authored
This will simplify the implementation of new variants into this driver. Signed-off-by:
-
Hugo Villeneuve authored
This will simplify the implementation of new variants into this driver. Signed-off-by:
-
Hugo Villeneuve authored
This will simplify the implementation of new variants into this driver. Signed-off-by:
-
Hugo Villeneuve authored
This will simplify the implementation of new variants into this driver. Signed-off-by:
-
Hugo Villeneuve authored
This will simplify the implementation of new variants into this driver. Some variants (PCF2131) have a 100th seconds register. This register is currently not supported in this driver. Signed-off-by:
-
Hugo Villeneuve authored
Create variant-specific configuration structures to simplify the implementation of new variants into this driver. It will also avoid to have too many tests for a specific variant, or a list of variants for new devices, inside the code itself. Add configuration options for the support of the NVMEM, bit CD0 in register WD_CTL as well as the maximum number of registers for each variant, instead of hardcoding the variant (PCF2127) inside the i2c_device_id and spi_device_id structures. Also specify a different maximum number of registers (max_register) for the PCF2129. Signed-off-by:
-
Hugo Villeneuve authored
Noted while reviewing new PCF2131 driver. Signed-off-by:
-
Hugo Villeneuve authored
Noted while reviewing new PCF2131 driver. Signed-off-by:
-
Hugo Villeneuve authored
Reading the 7 timetamp registers currently involves reading 25 registers solely to be able to print the content of the three control registers, in addition to the 7 timestamp registers. This print never occurs, unless the user enables dynamic debug in this driver or set CONFIG_RTC_DEBUG. Reading the timestamp registers should consist of reading 7 consecutive timestamp registers. This patch optimize the performance of reading the timestamp registers by reading 7 consecutive registers instead of 25, and dropping the print of the control registers. Signed-off-by:
-
Hugo Villeneuve authored
Improve performance and readability of rtc_read_time() by reading only the 7 time registers, instead of reading 8 registers (additional CTRL3 register). We drop reading of CTRL3 to monitor the low battery flag, as this check is already available in the ioctl. Anyway, this check only display an info message and has no other impacts. The code readability also improves as we do not have to fiddle with buffer pointer and size arithmetic. Signed-off-by:
-
- 09 Jul, 2023 10 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
We just sorted the entries and fields last release, so just out of a perverse sense of curiosity, I decided to see if we can keep things ordered for even just one release. The answer is "No. No we cannot". I suggest that all kernel developers will need weekly training sessions, involving a lot of Big Bird and Sesame Street. And at the yearly maintainer summit, we will all sing the alphabet song together. I doubt I will keep doing this. At some point "perverse sense of curiosity" turns into just a cold dark place filled with sadness and despair. Repeats: 80e62bc8 ("MAINTAINERS: re-sort all entries and fields") Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fixes from Christoph Hellwig: - swiotlb area sizing fixes (Petr Tesarik) * tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: reduce the number of areas to match actual memory pool size swiotlb: always set the number of areas before allocating the pool
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq update from Borislav Petkov: - Optimize IRQ domain's name assignment * tag 'irq_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqdomain: Use return value of strreplace()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fpu fix from Borislav Petkov: - Do FPU AP initialization on Xen PV too which got missed by the recent boot reordering work * tag 'x86_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/xen: Fix secondary processors' FPU initialization
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Thomas Gleixner: "A single fix for the mechanism to park CPUs with an INIT IPI. On shutdown or kexec, the kernel tries to park the non-boot CPUs with an INIT IPI. But the same code path is also used by the crash utility. If the CPU which panics is not the boot CPU then it sends an INIT IPI to the boot CPU which resets the machine. Prevent this by validating that the CPU which runs the stop mechanism is the boot CPU. If not, leave the other CPUs in HLT" * tag 'x86-core-2023-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/smp: Don't send INIT to boot CPU
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fixes from Thomas Bogendoerfer: - fixes for KVM - fix for loongson build and cpu probing - DT fixes * tag 'mips_6.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: kvm: Fix build error with KVM_MIPS_DEBUG_COP0_COUNTERS enabled MIPS: dts: add missing space before { MIPS: Loongson: Fix build error when make modules_install MIPS: KVM: Fix NULL pointer dereference MIPS: Loongson: Fix cpu_probe_loongson() again
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fix from Darrick Wong: "Nothing exciting here, just getting rid of a gcc warning that I got tired of seeing when I turn on gcov" * tag 'xfs-6.5-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix uninit warning in xfs_growfs_data
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull more smb client updates from Steve French: - fix potential use after free in unmount - minor cleanup - add worker to cleanup stale directory leases * tag '6.5-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: Add a laundromat thread for cached directories smb: client: remove redundant pointer 'server' cifs: fix session state transition to avoid use-after-free issue
-
https://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB updates from Jon Mason: "Fixes for pci_clean_master, error handling in driver inits, and various other issues/bugs" * tag 'ntb-6.5' of https://github.com/jonmason/ntb: ntb: hw: amd: Fix debugfs_create_dir error checking ntb.rst: Fix copy and paste error ntb_netdev: Fix module_init problem ntb: intel: Remove redundant pci_clear_master ntb: epf: Remove redundant pci_clear_master ntb_hw_amd: Remove redundant pci_clear_master ntb: idt: drop redundant pci_enable_pcie_error_reporting() MAINTAINERS: git://github -> https://github.com for jonmason NTB: EPF: fix possible memory leak in pci_vntb_probe() NTB: ntb_tool: Add check for devm_kcalloc NTB: ntb_transport: fix possible memory leak while device_register() fails ntb: intel: Fix error handling in intel_ntb_pci_driver_init() NTB: amd: Fix error handling in amd_ntb_pci_driver_init() ntb: idt: Fix error handling in idt_pci_driver_init()
-
- 08 Jul, 2023 3 commits
-
-
Hugh Dickins authored
Lockdep is certainly right to complain about (&vma->vm_lock->lock){++++}-{3:3}, at: vma_start_write+0x2d/0x3f but task is already holding lock: (&mapping->i_mmap_rwsem){+.+.}-{3:3}, at: mmap_region+0x4dc/0x6db Invert those to the usual ordering. Fixes: 33313a74 ("mm: lock newly mapped VMA which can be modified after it becomes visible") Cc: stable@vger.kernel.org Signed-off-by:Hugh Dickins <hughd@google.com> Tested-by:
Suren Baghdasaryan <surenb@google.com> Signed-off-by:
-
Linus Torvalds authored
Merge tag 'mm-hotfixes-stable-2023-07-08-10-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull hotfixes from Andrew Morton: "16 hotfixes. Six are cc:stable and the remainder address post-6.4 issues" The merge undoes the disabling of the CONFIG_PER_VMA_LOCK feature, since it was all hopefully fixed in mainline. * tag 'mm-hotfixes-stable-2023-07-08-10-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: lib: dhry: fix sleeping allocations inside non-preemptable section kasan, slub: fix HW_TAGS zeroing with slub_debug kasan: fix type cast in memory_is_poisoned_n mailmap: add entries for Heiko Stuebner mailmap: update manpage link bootmem: remove the vmemmap pages from kmemleak in free_bootmem_page MAINTAINERS: add linux-next info mailmap: add Markus Schneider-Pargmann writeback: account the number of pages written back mm: call arch_swap_restore() from do_swap_page() squashfs: fix cache race with migration mm/hugetlb.c: fix a bug within a BUG(): inconsistent pte comparison docs: update ocfs2-devel mailing list address MAINTAINERS: update ocfs2-devel mailing list address mm: disable CONFIG_PER_VMA_LOCK until its fixed fork: lock VMAs of the parent process when forking
-
Suren Baghdasaryan authored
When forking a child process, the parent write-protects anonymous pages and COW-shares them with the child being forked using copy_present_pte(). We must not take any concurrent page faults on the source vma's as they are being processed, as we expect both the vma and the pte's behind it to be stable. For example, the anon_vma_fork() expects the parents vma->anon_vma to not change during the vma copy. A concurrent page fault on a page newly marked read-only by the page copy might trigger wp_page_copy() and a anon_vma_prepare(vma) on the source vma, defeating the anon_vma_clone() that wasn't done because the parent vma originally didn't have an anon_vma, but we now might end up copying a pte entry for a page that has one. Before the per-vma lock based changes, the mmap_lock guaranteed exclusion with concurrent page faults. But now we need to do a vma_start_write() to make sure no concurrent faults happen on this vma while it is being processed. This fix can potentially regress some fork-heavy workloads. Kernel build time did not show noticeable regression on a 56-core machine while a stress test mapping 10000 VMAs and forking 5000 times in a tight loop shows ~5% regression. If such fork time regression is unacceptable, disabling CONFIG_PER_VMA_LOCK should restore its performance. Further optimizations are possible if this regression proves to be problematic. Suggested-by:
David Hildenbrand <david@redhat.com> Reported-by:
Jiri Slaby <jirislaby@kernel.org> Closes: https://lore.kernel.org/all/dbdef34c-3a07-5951-e1ae-e9c6e3cdf51b@kernel.org/Reported-by:
Holger Hoffstätte <holger@applied-asynchrony.com> Closes: https://lore.kernel.org/all/b198d649-f4bf-b971-31d0-e8433ec2a34c@applied-asynchrony.com/Reported-by:
Jacob Young <jacobly.alt@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217624 Fixes: 0bff0aae ("x86/mm: try VMA lock-based page fault handling first") Cc: stable@vger.kernel.org Signed-off-by:
-
