This change updates the ti-soc-thermal driver to use
standard GPIO DT bindings to read the GPIO number associated
to thermal shutdown IRQ, in case the device features it.

Previously, the code was using a specific DT bindings.
As now OMAP supports the standard way to model GPIOs,
there is no point in having a ti specific binding.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree-discuss@lists.ozlabs.org
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>

To reduce thermal maintenance load on Rui, SoC specific patches would be
applied by me now. Rui Zhang will pull in these changes from time to time (at
rc's). Additionally I would be sending him pull request for every merge
window and rc's (for fixes).

Branch names would be: next and fixes.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>

Fix build error in x86_pkg_temp_thermal.c.  It requires that
X86_MCE & X86_THERMAL_VECTOR be enabled, so depend on the latter symbol,
since it depends on X86_MCE (indirectly).

Also, X86_PKG_TEMP_THERMAL is already inside an "if THERMAL" block,
so remove that duplicated dependency.

ERROR: "platform_thermal_package_rate_control" [drivers/thermal/x86_pkg_temp_thermal.ko] undefined!
ERROR: "platform_thermal_package_notify" [drivers/thermal/x86_pkg_temp_thermal.ko] undefined!
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

Conflicts:
	drivers/thermal/Kconfig
	drivers/thermal/Makefile

Added documentation describing details of the x86 package temperature
thermal driver.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

This driver register CPU digital temperature sensor as a thermal
zone at package level.
Each package will show up as one zone with at max two trip points.
These trip points can be both read and updated. Once a non zero
value is set in the trip point, if the package package temperature
goes above or below this setting, a thermal notification is
generated.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

In case emulated temperature is in use, using the trend
provided by driver layer can lead to bogus situation.
In this case, debugger user would set a temperature value,
but the trend would be from driver computation.

To avoid this situation, this patch changes the get_tz_trend()
to consider the emulated temperature whenever that is in use.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Durgadoss R <durgadoss.r@intel.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

Update documentation by adding an example for DRA752 on DT description.

Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Rob Landley <rob@landley.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: J Keerthy <j-keerthy@ti.com>
Cc: devicetree-discuss@lists.ozlabs.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

Add support to TI dra752 chips by adapting the driver
device table.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

This patch adds the thermal data for TI DRA752 chips.
In this change it includes (autogen):
. Register offset definitions
. Bitfields and masks for all registers
. Conversion table

Also, the thermal limits, thresholds and extrapolation
rules are included. The extrapolation rule is simply
add +2C as margin.

All 5 sensors, MPU, GPU, CORE, DSPEVE and IVA, are defined
and exposed. Only MPU has cooling device.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

This patch changes the driver to avoid the usage of IS_ERR_OR_NULL()
macro. This macro can lead to dangerous results, like returning
success (0) during a failure scenario (NULL pointer handling).

For this reason this patch is changing the driver after
revisiting the code. These are the cases:
i. For cases in which IS_ERR_OR_NULL() is used for checking
return values of functions that returns either PTR_ERR()
or a valid pointer, it has been translated to IS_ERR() check only.
ii. For cases that a NULL check is still needed, it has been
translated to if (!ptr || IS_ERR(ptr)).

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

In order to read the history buffer, it is required to
freeze BG FSM. This patch adds the missing piece of code
to freeze the FSM and also a contention area to avoid
other parts of the code to access the DTEMPs.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

For boards that provide a PCB sensor close to SoC junction
temperature, it is possible to remove the cumulative heat
reported by the SoC temperature sensor.

This patch changes the extrapolation computation to consider
an external sensor in the extrapolation equations.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

Add missing irq line for TALERT on DT entry for OMAP5430.

Cc: linux-pm@vger.kernel.org
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Rob Landley <rob@landley.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: J Keerthy <j-keerthy@ti.com>
Cc: devicetree-discuss@lists.ozlabs.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

Added callback registration for package threshold reports. Also added
a callback to check the rate control implemented in callback or not.
If there is no rate control implemented, then there is a default rate
control similar to core threshold notification by delaying for
CHECK_INTERVAL (5 minutes) between reports.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

The variable 'descend' is initialized as -1 in function get_property(),
and will never get any chance to be updated by the following code.

	if (freq != CPUFREQ_ENTRY_INVALID && descend != -1)
		descend = !!(freq > table[i].frequency);

This makes function get_property() return the wrong frequency for given
cooling level if the frequency table is sorted in ascending.  Fix it
by correcting the 'descend' check in if-condition to 'descend == -1'.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

'spear_thermal_id_table' is always compiled in and the driver
is dependent on OF. Hence use of of_match_ptr is unnecessary.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Vincenzo Frascino <vincenzo.frascino@st.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

'kirkwood_thermal_id_table' is always compiled in and the driver
is dependent on OF. Hence use of of_match_ptr is unnecessary.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

'dove_thermal_id_table' is always compiled in and the driver
is dependent on OF. Hence use of of_match_ptr is unnecessary.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Acked-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

'armada_thermal_id_table' is always compiled in and the driver
is dependent on OF. Hence use of of_match_ptr is unnecessary.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Acked-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

Update driver path and status for TI SoC thermal drivers
on MAINTAINERS file.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

This patch moves the ti-soc-thermal driver out of
the staging tree to the thermal tree.

Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Rob Landley <rob@landley.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <eduardo.valentin@ti.com>
Cc: J Keerthy <j-keerthy@ti.com>
Cc: Radhesh Fadnis <radhesh.fadnis@ti.com>
Cc: Cyril Roelandt <tipecaml@gmail.com>
Cc: devicetree-discuss@lists.ozlabs.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devel@driverdev.osuosl.org
Cc: linux-pm@vger.kernel.org
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

devm_ioremap_resource does sanity checks on the given resource.
No need to duplicate this in the driver.

CC: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
CC: Vincenzo Frascino <vincenzo.frascino@st.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>

This patch adds a requirement needing .get_trip_temp() callback
function for registering thermal zone device. This function is
used when thermal zone is updated and essential where thermal core
handles thermal trip based only polling way not hw interrupt.
Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Acked-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

Setting policy results in invalid value error.
	% echo "step_wise" > policy
	% echo: write error: Invalid argument

Need clean up of the buffer which "echo" may add based on the arguments, before
comparing aganist list of governor names.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Eduardo Valentin <eduardo.valentin@ti.com>
Tested-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

Use the newly introduced devm_ioremap_resource().

devm_ioremap_resource() provides its own error messages; so all explicit
error messages can be removed from the failure code paths.

CC: Vincenzo Frascino <vincenzo.frascino@st.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

devm_ioremap_resource does sanity checks on the given resource. No need to
duplicate this in the driver.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

Merge tag 'trace-fixes-v3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "This includes a fix to a memory leak when adding filters to traces.

  Also, Masami Hiramatsu fixed up some minor bugs that were discovered
  by sparse."

* tag 'trace-fixes-v3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing/kprobes: Make print_*probe_event static
  tracing/kprobes: Fix a sparse warning for incorrect type in assignment
  tracing/kprobes: Use rcu_dereference_raw for tp->files
  tracing: Fix leaks of filter preds

Pull x86 fixes from Thomas Gleixner:

 - Fix for a CPU hot-add deadlock in microcode update code

 - Fix for idle consolidation fallout

 - Documentation update for initial kernel direct mapping

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Add missing comments for initial kernel direct mapping
  x86/microcode: Add local mutex to fix physical CPU hot-add deadlock
  x86: Fix idle consolidation fallout

Pull perf fixes from Thomas Gleixner:

 - Fix for a task exit cleanup race caused by a missing a preempt
   disable

 - Cleanup of the event notification functions with a massive reduction
   of duplicated code

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Factor out auxiliary events notification
  perf: Fix EXIT event notification

Pull timer fixes from Thomas Gleixner:

 - Cure for not using zalloc in the first place, which leads to random
   crashes with CPUMASK_OFF_STACK.

 - Revert a user space visible change which broke udev

 - Add a missing cpu_online early return introduced by the new full
   dyntick conversions

 - Plug a long standing race in the timer wheel cpu hotplug code.
   Sigh...

 - Cleanup NOHZ per cpu data on cpu down to prevent stale data on cpu
   up.

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Revert ALWAYS_USE_PERSISTENT_CLOCK compile time optimizaitons
  timer: Don't reinitialize the cpu base lock during CPU_UP_PREPARE
  tick: Don't invoke tick_nohz_stop_sched_tick() if the cpu is offline
  tick: Cleanup NOHZ per cpu data on cpu down
  tick: Use zalloc_cpumask_var for allocating offstack cpumasks

Pull core fixes from Thomas Gleixner:

 - Two fixlets for the fallout of the generic idle task conversion

 - Documentation update

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rcu/idle: Wrap cpu-idle poll mode within rcu_idle_enter/exit
  idle: Fix hlt/nohlt command-line handling in new generic idle
  kthread: Document ways of reducing OS jitter due to per-CPU kthreads

Pull ARM fixes from Russell King:
 "A small number of fixes for stuff from the last merge window, and in
  one case (IRQ time accounting) the previous merge window."

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7720/1: ARM v6/v7 cmpxchg64 shouldn't clear upper 32 bits of the old/new value
  ARM: 7715/1: MCPM: adapt to GIC changes after upstream merge
  ARM: 7714/1: mmc: mmci: Ensure return value of regulator_enable() is checked
  ARM: 7712/1: Remove trailing whitespace in arch/arm/Makefile
  ARM: 7711/1: dove: fix Dove cpu type from V7 to PJ4
  ARM: finally enable IRQ time accounting config

Pull Ceph fixes from Sage Weil:
 "Yes, this is a much larger pull than I would like after -rc1.  There
  are a few things included:

   - a few fixes for leaks and incorrect assertions
   - a few patches fixing behavior when mapped images are resized
   - handling for cloned/layered images that are flattened out from
     underneath the client

  The last bit was non-trivial, and there is some code movement and
  associated cleanup mixed in.  This was ready and was meant to go in
  last week but I missed the boat on Friday.  My only excuse is that I
  was waiting for an all clear from the testing and there were many
  other shiny things to distract me.

  Strictly speaking, handling the flatten case isn't a regression and
  could wait, so if you like we can try to pull the series apart, but
  Alex and I would much prefer to have it all in as it is a case real
  users will hit with 3.10."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (33 commits)
  rbd: re-submit flattened write request (part 2)
  rbd: re-submit write request for flattened clone
  rbd: re-submit read request for flattened clone
  rbd: detect when clone image is flattened
  rbd: reference count parent requests
  rbd: define parent image request routines
  rbd: define rbd_dev_unparent()
  rbd: don't release write request until necessary
  rbd: get parent info on refresh
  rbd: ignore zero-overlap parent
  rbd: support reading parent page data for writes
  rbd: fix parent request size assumption
  libceph: init sent and completed when starting
  rbd: kill rbd_img_request_get()
  rbd: only set up watch for mapped images
  rbd: set mapping read-only flag in rbd_add()
  rbd: support reading parent page data
  rbd: fix an incorrect assertion condition
  rbd: define rbd_dev_v2_header_info()
  rbd: get rid of trivial v1 header wrappers
  ...

According to sparse warning, print_*probe_event static because
those functions are not directly called from outside.

Link: http://lkml.kernel.org/r/20130513115839.6545.83067.stgit@mhiramat-M0-7522

Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Fix a sparse warning about the rcu operated pointer is
defined without __rcu address space.

Link: http://lkml.kernel.org/r/20130513115837.6545.23322.stgit@mhiramat-M0-7522

Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>