- 02 Jan, 2018 40 commits
-
-
Eric Dumazet authored
[ Upstream commit b5476022 ] IPv4 stack reacts to changes to small MTU, by disabling itself under RTNL. But there is a window where threads not using RTNL can see a wrong device mtu. This can lead to surprises, in igmp code where it is assumed the mtu is suitable. Fix this by reading device mtu once and checking IPv4 minimal MTU. This patch adds missing IPV4_MIN_MTU define, to not abuse ETH_MIN_MTU anymore. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Linus Torvalds authored
commit 3ce120b1 upstream. It appears that hardened gentoo enables "-fstack-check" by default for gcc. That doesn't work _at_all_ for the kernel, because the kernel stack doesn't act like a user stack at all: it's much smaller, and it doesn't auto-expand on use. So the extra "probe one page below the stack" code generated by -fstack-check just breaks the kernel in horrible ways, causing infinite double faults etc. [ I have to say, that the particular code gcc generates looks very stupid even for user space where it works, but that's a separate issue. ] Reported-and-tested-by:
Alexander Tsoy <alexander@tsoy.me> Reported-and-tested-by:
Toralf Förster <toralf.foerster@gmx.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Ming Lei authored
commit 14cb0dc6 upstream. Commit a8821f3f("block: Improvements to bounce-buffer handling") tries to make sure that the bio to .make_request_fn won't exceed BIO_MAX_PAGES, but ignores that passthrough I/O can use blk_queue_bounce() too. Especially, passthrough IO may not be sector-aligned, and the check of 'sectors < bio_sectors(*bio_orig)' inside __blk_queue_bounce() may become true even though the max bvec number doesn't exceed BIO_MAX_PAGES, then cause the bio splitted, and the original passthrough bio is submited to generic_make_request(). This patch fixes this issue by checking if the bio is passthrough IO, and use bio_kmalloc() to allocate the cloned passthrough bio. Cc: NeilBrown <neilb@suse.com> Fixes: a8821f3f("block: Improvements to bounce-buffer handling") Tested-by:
Michele Ballabio <barra_cuda@katamail.com> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Jens Axboe authored
commit 0abc2a10 upstream. Commit caa4b024(blk-map: call blk_queue_bounce from blk_rq_append_bio) moves blk_queue_bounce() into blk_rq_append_bio(), but don't consider the fact that the bounced bio becomes invisible to caller since the parameter type is 'struct bio *'. Make it a pointer to a pointer to a bio, so the caller sees the right bio also after a bounce. Fixes: caa4b024 ("blk-map: call blk_queue_bounce from blk_rq_append_bio") Cc: Christoph Hellwig <hch@lst.de> Reported-by:
-
Joel Fernandes authored
commit 466a2b42 upstream. Since the recent remote cpufreq callback work, its possible that a cpufreq update is triggered from a remote CPU. For single policies however, the current code uses the local CPU when trying to determine if the remote sg_cpu entered idle or is busy. This is incorrect. To remedy this, compare with the nohz tick idle_calls counter of the remote CPU. Fixes: 674e7541 (sched: cpufreq: Allow remote cpufreq callbacks) Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Joel Fernandes <joelaf@google.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Takashi Iwai authored
commit 44be77c5 upstream. There was a long-standing problem on HP Spectre X360 with Kabylake where it lacks of the front speaker output in some situations. Also there are other products showing the similar behavior. The culprit seems to be the missing COEF setup on ALC codecs, ALC225/295/299, which are all compatible. This patch adds the proper COEF setup (to initialize idx 0x67 / bits 0x3000) for addressing the issue. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195457Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Hui Wang authored
commit 285d5ddc upstream. It has the codec alc256, and add its pin definition to pin quirk table to let it apply ALC255_FIXUP_DELL1_MIC_NO_PRESENCE. Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
Hui Wang authored
commit 8da5bbfc upstream. There are two front mics on this machine, and current driver assign the same name Mic to both of them, but pulseaudio can't handle them. As a workaround, we change the location for one of them, then the driver will assign "Front Mic" and "Mic" for them. Signed-off-by:
-
Hui Wang authored
commit 322f74ed upstream. There is a headset jack on the front panel, when we plug a headset into it, the headset mic can't trigger unsol events, and read_pin_sense() can't detect its presence too. So add this fixup to fix this issue. Signed-off-by:
-
Takashi Iwai authored
commit a36c2638 upstream. Since the commit 97cc2ed2 ("ALSA: hda - Fix yet another i915 pointer leftover in error path") cleared hdac_acomp pointer, the WARN_ON() non-NULL check in snd_hdac_i915_register_notifier() may give a false-positive warning, as the function gets called no matter whether the component is registered or not. For fixing it, let's get rid of the spurious WARN_ON(). Fixes: 97cc2ed2 ("ALSA: hda - Fix yet another i915 pointer leftover in error path") Reported-by:
Kouta Okamoto <kouta.okamoto@toshiba.co.jp> Signed-off-by:
-
Moni Shoua authored
commit 4a50881b upstream. The XRC target QP create flow sets up qp_sec only if there is an IB link with LSM security enabled. However, several other related uAPI entry points blindly follow the qp_sec NULL pointer, resulting in a possible oops. Check for NULL before using qp_sec. Fixes: d291f1a6 ("IB/core: Enforce PKey security on QPs") Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Moni Shoua authored
commit 05d14e7b upstream. If the input command length is larger than the kernel supports an error should be returned in case the unsupported bytes are not cleared, instead of the other way aroudn. This matches what all other callers of ib_is_udata_cleared do and will avoid user ABI problems in the future. Fixes: 189aba99 ("IB/uverbs: Extend modify_qp and support packet pacing") Reviewed-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
-
Majd Dibbiny authored
commit ad9a3668 upstream. User-space applications can do mmap and munmap directly at any time. Since the VMA list is not protected with a mutex, concurrent accesses to the VMA list from the mmap and munmap can cause data corruption. Add a mutex around the list. Fixes: 7c2344c3 ("IB/mlx5: Implements disassociate_ucontext API") Reviewed-by:
Majd Dibbiny <majd@mellanox.com> Signed-off-by:
-
Michael J. Ruhl authored
commit 4c009af4 upstream. During driver init, various registers are saved to allow restoration after an FLR or gen3 bump. Some of these registers are not available in some circumstances (i.e. Virtual machines). This bug makes the driver unusable when the PCI device is passed into a VM, it fails during probe. Delete unnecessary register read/write, and only access register if the capability exists. Fixes: a618b7e4 ("IB/hfi1: Move saving PCI values to a separate function") Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
-
Christophe Leroy authored
commit 82270335 upstream. Following commit 9427ecbe ("gpio: Rework of_gpiochip_set_names() to use device property accessors"), "gpio-line-names" DT property is not retrieved anymore when chip->parent is not set by the driver. This is due to OF based property reads having been replaced by device based property reads. This patch fixes that by making use of fwnode_property_read_string_array() instead of device_property_read_string_array() and handing over either of_fwnode_handle(chip->of_node) or dev_fwnode(chip->parent) to that function. Fixes: 9427ecbe ("gpio: Rework of_gpiochip_set_names() to use device property accessors") Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Andrew F. Davis authored
commit 737e0b7b upstream. GPIO1 control register is number 51, fix this here. Fixes: bafcbfe4 ("ASoC: tlv320aic31xx: Make the register values human readable") Signed-off-by:
Andrew F. Davis <afd@ti.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 15f8c5f2 upstream. Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent codec node was also prematurely freed, while the child node was leaked. Fixes: 2d6d649a ("ASoC: twl4030: Support for DT booted kernel") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Maciej S. Szmigiero authored
commit 695b78b5 upstream. AC'97 ops (register read / write) need SSI regmap and clock, so they have to be set after them. We also need to set these ops back to NULL if we fail the probe. Signed-off-by:
Maciej S. Szmigiero <mail@maciej.szmigiero.name> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by:
-
Johan Hovold authored
commit bc6476d6 upstream. Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent codec node was also prematurely freed. Fixes: 4d50934a ("ASoC: da7218: Add da7218 codec driver") Signed-off-by:
Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by:
-
Ben Hutchings authored
commit 50dd2ea8 upstream. The checks for whether another region/block header could be present are subtracting the size from the current offset. Obviously we should instead subtract the offset from the size. The checks for whether the region/block data fit in the file are adding the data size to the current offset and header size, without checking for integer overflow. Rearrange these so that overflow is impossible. Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by:
-
Srinivas Kandagatla authored
commit 51f493ae upstream. This codec is configurable for only 16 bit and 32 bit samples, so reflect this in the supported formats also remove 24bit sample from supported list. Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
-
Steve Wise authored
commit f55688c4 upstream. If the RECV CQE is in error, ignore the MSN check. This was causing recvs that were flushed into the sw cq to be completed with the wrong status (BAD_MSN instead of FLUSHED). Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit ae415fa4 upstream. To free the reader page that is allocated with ring_buffer_alloc_read_page(), ring_buffer_free_read_page() must be called. For faster performance, this page can be reused by the ring buffer to avoid having to free and allocate new pages. The issue arises when the page is used with a splice pipe into the networking code. The networking code may up the page counter for the page, and keep it active while sending it is queued to go to the network. The incrementing of the page ref does not prevent it from being reused in the ring buffer, and this can cause the page that is being sent out to the network to be modified before it is sent by reading new data. Add a check to the page ref counter, and only reuse the page if it is not being used anywhere else. Fixes: 73a757e6 ("ring-buffer: Return reader page back into existing ring buffer") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 45d8b80c upstream. Two info bits were added to the "commit" part of the ring buffer data page when returned to be consumed. This was to inform the user space readers that events have been missed, and that the count may be stored at the end of the page. What wasn't handled, was the splice code that actually called a function to return the length of the data in order to zero out the rest of the page before sending it up to user space. These data bits were returned with the length making the value negative, and that negative value was not checked. It was compared to PAGE_SIZE, and only used if the size was less than PAGE_SIZE. Luckily PAGE_SIZE is unsigned long which made the compare an unsigned compare, meaning the negative size value did not end up causing a large portion of memory to be randomly zeroed out. Fixes: 66a8cb95 ("ring-buffer: Add place holder recording of dropped events") Signed-off-by:
-
Thomas Gleixner authored
commit 9f5cb6b3 upstream. Now that the LDT mapping is in a known area when PAGE_TABLE_ISOLATION is enabled its a primary target for attacks, if a user space interface fails to validate a write address correctly. That can never happen, right? The SDM states: If the segment descriptors in the GDT or an LDT are placed in ROM, the processor can enter an indefinite loop if software or the processor attempts to update (write to) the ROM-based segment descriptors. To prevent this problem, set the accessed bits for all segment descriptors placed in a ROM. Also, remove operating-system or executive code that attempts to modify segment descriptors located in ROM. So its a valid approach to set the ACCESS bit when setting up the LDT entry and to map the table RO. Fixup the selftest so it can handle that new mode. Remove the manual ACCESS bit setter in set_tls_desc() as this is now pointless. Folded the patch from Peter Ziljstra. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Thomas Gleixner authored
commit a4b51ef6 upstream. Add two debugfs files which allow to dump the pagetable of the current task. current_kernel dumps the regular page table. This is the page table which is normally shared between kernel and user space. If kernel page table isolation is enabled this is the kernel space mapping. If kernel page table isolation is enabled the second file, current_user, dumps the user space page table. These files allow to verify the resulting page tables for page table isolation, but even in the normal case its useful to be able to inspect user space page tables of current for debugging purposes. Signed-off-by:
-
Thomas Gleixner authored
commit b4bf4f92 upstream. ptdump_walk_pgd_level_checkwx() checks the kernel page table for WX pages, but does not check the PAGE_TABLE_ISOLATION user space page table. Restructure the code so that dmesg output is selected by an explicit argument and not implicit via checking the pgd argument for !NULL. Add the check for the user space page table. Signed-off-by:
-
Borislav Petkov authored
commit 75298aa1 upstream. The upcoming support for dumping the kernel and the user space page tables of the current process would create more random files in the top level debugfs directory. Add a page table directory and move the existing file to it. Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Dave Hansen authored
commit 385ce0ea upstream. Finally allow CONFIG_PAGE_TABLE_ISOLATION to be enabled. PARAVIRT generally requires that the kernel not manage its own page tables. It also means that the hypervisor and kernel must agree wholeheartedly about what format the page tables are in and what they contain. PAGE_TABLE_ISOLATION, unfortunately, changes the rules and they can not be used together. I've seen conflicting feedback from maintainers lately about whether they want the Kconfig magic to go first or last in a patch series. It's going last here because the partially-applied series leads to kernels that can not boot in a bunch of cases. I did a run through the entire series with CONFIG_PAGE_TABLE_ISOLATION=y to look for build errors, though. [ tglx: Removed SMP and !PARAVIRT dependencies as they not longer exist ] Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by:
-
Vlastimil Babka authored
commit 5f26d76c upstream. CONFIG_PAGE_TABLE_ISOLATION is relatively new and intrusive feature that may still have some corner cases which could take some time to manifest and be fixed. It would be useful to have Oops messages indicate whether it was enabled for building the kernel, and whether it was disabled during boot. Example of fully enabled: Oops: 0001 [#1] SMP PTI Example of enabled during build, but disabled during boot: Oops: 0001 [#1] SMP NOPTI We can decide to remove this after the feature has been tested in the field long enough. [ tglx: Made it use boot_cpu_has() as requested by Borislav ] Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
Eduardo Valentin <eduval@amazon.com> Acked-by:
Dave Hansen <dave.hansen@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: bpetkov@suse.de Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: jkosina@suse.cz Cc: keescook@google.com Signed-off-by:
-
Peter Zijlstra authored
commit 0a126abd upstream. Ideally we'd also use sparse to enforce this separation so it becomes much more difficult to mess up. Signed-off-by:
-
Dave Hansen authored
commit 6cff64b8 upstream. This uses INVPCID to shoot down individual lines of the user mapping instead of marking the entire user map as invalid. This could/might/possibly be faster. This for sure needs tlb_single_page_flush_ceiling to be redetermined; esp. since INVPCID is _slow_. A detailed performance analysis is available here: https://lkml.kernel.org/r/3062e486-3539-8a1f-5724-16199420be71@intel.com [ Peterz: Split out from big combo patch ] Signed-off-by:
-
Peter Zijlstra authored
commit 21e94459 upstream. Most NMI/paranoid exceptions will not in fact change pagetables and would thus not require TLB flushing, however RESTORE_CR3 uses flushing CR3 writes. Restores to kernel PCIDs can be NOFLUSH, because we explicitly flush the kernel mappings and now that we track which user PCIDs need flushing we can avoid those too when possible. This does mean RESTORE_CR3 needs an additional scratch_reg, luckily both sites have plenty available. Signed-off-by:
-
Peter Zijlstra authored
commit 6fd166aa upstream. We can use PCID to retain the TLBs across CR3 switches; including those now part of the user/kernel switch. This increases performance of kernel entry/exit at the cost of more expensive/complicated TLB flushing. Now that we have two address spaces, one for kernel and one for user space, we need two PCIDs per mm. We use the top PCID bit to indicate a user PCID (just like we use the PFN LSB for the PGD). Since we do TLB invalidation from kernel space, the existing code will only invalidate the kernel PCID, we augment that by marking the corresponding user PCID invalid, and upon switching back to userspace, use a flushing CR3 write for the switch. In order to access the user_pcid_flush_mask we use PER_CPU storage, which means the previously established SWAPGS vs CR3 ordering is now mandatory and required. Having to do this memory access does require additional registers, most sites have a functioning stack and we can spill one (RAX), sites without functional stack need to otherwise provide the second scratch register. Note: PCID is generally available on Intel Sandybridge and later CPUs. Note: Up until this point TLB flushing was broken in this series. Based-on-code-from: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by:
-
Dave Hansen authored
commit 48e11198 upstream. In preparation to adding additional PCID flushing, abstract the loading of a new ASID into CR3. [ PeterZ: Split out from big combo patch ] Signed-off-by:
-
Dave Hansen authored
commit 2ea907c4 upstream. If changing the page tables in such a way that an invalidation of all contexts (aka. PCIDs / ASIDs) is required, they can be actively invalidated by: 1. INVPCID for each PCID (works for single pages too). 2. Load CR3 with each PCID without the NOFLUSH bit set 3. Load CR3 with the NOFLUSH bit set for each and do INVLPG for each address. But, none of these are really feasible since there are ~6 ASIDs (12 with PAGE_TABLE_ISOLATION) at the time that invalidation is required. Instead of actively invalidating them, invalidate the *current* context and also mark the cpu_tlbstate _quickly_ to indicate future invalidation to be required. At the next context-switch, look for this indicator ('invalidate_other' being set) invalidate all of the cpu_tlbstate.ctxs[] entries. This ensures that any future context switches will do a full flush of the TLB, picking up the previous changes. [ tglx: Folded more fixups from Peter ] Signed-off-by:
-
Andy Lutomirski authored
commit 85900ea5 upstream. Make VSYSCALLs work fully in PTI mode by mapping them properly to the user space visible page tables. [ tglx: Hide unused functions (Patch by Arnd Bergmann) ] Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
-
Andy Lutomirski authored
commit f55f0501 upstream. With PTI enabled, the LDT must be mapped in the usermode tables somewhere. The LDT is per process, i.e. per mm. An earlier approach mapped the LDT on context switch into a fixmap area, but that's a big overhead and exhausted the fixmap space when NR_CPUS got big. Take advantage of the fact that there is an address space hole which provides a completely unused pgd. Use this pgd to manage per-mm LDT mappings. This has a down side: the LDT isn't (currently) randomized, and an attack that can write the LDT is instant root due to call gates (thanks, AMD, for leaving call gates in AMD64 but designing them wrong so they're only useful for exploits). This can be mitigated by making the LDT read-only or randomizing the mapping, either of which is strightforward on top of this patch. This will significantly slow down LDT users, but that shouldn't matter for important workloads -- the LDT is only used by DOSEMU(2), Wine, and very old libc implementations. [ tglx: Cleaned it up. ] Signed-off-by:
-
Andy Lutomirski authored
commit 9f449772 upstream. Shrink vmalloc space from 16384TiB to 12800TiB to enlarge the hole starting at 0xff90000000000000 to be a full PGD entry. A subsequent patch will use this hole for the pagetable isolation LDT alias. Signed-off-by:
-
Hugh Dickins authored
commit c1961a46 upstream. The BTS and PEBS buffers both have their virtual addresses programmed into the hardware. This means that any access to them is performed via the page tables. The times that the hardware accesses these are entirely dependent on how the performance monitoring hardware events are set up. In other words, there is no way for the kernel to tell when the hardware might access these buffers. To avoid perf crashes, place 'debug_store' allocate pages and map them into the cpu_entry_area. The PEBS fixup buffer does not need this treatment. [ tglx: Got rid of the kaiser_add_mapping() complication ] Signed-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
-
