- 04 Apr, 2017 11 commits
-
-
Akshay Bhat authored
This patch adds support for the Holt HI-311x CAN controller. The HI311x CAN controller is capable of transmitting and receiving standard data frames, extended data frames and remote frames. The HI311x interfaces with the host over SPI. Datasheet: www.holtic.com/documents/371-hi-3110_v-rev-jpdf.do Signed-off-by:
Akshay Bhat <nodeax@gmail.com> Acked-by:
Wolfgang Grandegger <wg@grandegger.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Akshay Bhat authored
Document the HOLT HI-311x CAN device tree bindings. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Mario Kicherer authored
This patch adds initial support for network namespaces. The changes only enable support in the CAN raw, proc and af_can code. GW and BCM still have their checks that ensure that they are used only from the main namespace. The patch boils down to moving the global structures, i.e. the global filter list and their /proc stats, into a per-namespace structure and passing around the corresponding "struct net" in a lot of different places. Changes since v1: - rebased on current HEAD (2bfe01ef) - fixed overlong line Signed-off-by:
Mario Kicherer <dev@kicherer.org> Signed-off-by:
-
Yegor Yefremov authored
This patch converts TI HECC driver to DT only driver. This results in removing ti_hecc.h containing now obsolete platform data. Former transceiver_switch callback function will be now modelled via regulator API. Signed-off-by:
Anton Glukhov <anton.a.glukhov@gmail.com> Signed-off-by:
Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by:
-
Yegor Yefremov authored
DT binding documentation for TI High End CAN Controller Signed-off-by:
-
Alexey Dobriyan authored
Number of sockets is limited by 16-bit, so 64-bit allocation will never happen. 16-bit ops are the worst code density-wise on x86_64 because of additional prefix (66). Space savings: add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-3 (-3) function old new delta reuseport_add_sock 539 536 -3 Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexey Dobriyan authored
Make ->hash_count, ->low_watermark and ->high_watermark unsigned int and propagate unsignedness to other variables. This change doesn't change code generation because these fields aren't used in 64-bit contexts but make it anyway: these fields can't be negative numbers. Signed-off-by:
-
Alexey Dobriyan authored
Hash size can't negative so "unsigned int" is logically correct. Propagate "unsigned int" to loop counters. Space savings: add/remove: 0/0 grow/shrink: 2/2 up/down: 6/-18 (-12) function old new delta flow_cache_flush_tasklet 362 365 +3 __flow_cache_shrink 333 336 +3 flow_cache_cpu_up_prep 178 171 -7 flow_cache_lookup 1159 1148 -11 Signed-off-by:
-
Alexey Dobriyan authored
Flow keys aren't 4GB+ numbers so 64-bit arithmetic is excessive. Space savings (I'm not sure what CSWTCH is): add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-48 (-48) function old new delta flow_cache_lookup 1163 1159 -4 CSWTCH 75997 75953 -44 Signed-off-by:
-
Andrew Lunn authored
Breaking the include loop netdevice.h, dsa.h, devlink.h broke this driver, it depends on includes brought in by these headers. Adding linux/of.h fixes it. Fixes: ed0e39e97d34 ("net: break include loop netdevice.h, dsa.h, devlink.h") Signed-off-by:Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Vincent Bernat authored
When an incoming frame is tagged or when GRO is disabled, the skb handled to vxlan_xmit() doesn't contain a valid transport header offset. This makes ND proxying fail. We combine two changes: replace use of skb_transport_offset() and ensure the necessary amount of skb is linear just before using it: - In vxlan_xmit(), when determining if we have an ICMPv6 neighbor discovery packet, just check if it is an ICMPv6 packet and rely on neigh_reduce() to do more checks if this is the case. The use of pskb_may_pull() is replaced by skb_header_pointer() for just the IPv6 header. - In neigh_reduce(), add pskb_may_pull() for IPv6 header and neighbor discovery message since this was removed from vxlan_xmit(). Replace skb_transport_header() with ipv6_hdr() + 1. - In vxlan_na_create(), replace first skb_transport_offset() with ipv6_hdr() + 1 and second with skb_network_offset() + sizeof(struct ipv6hdr). Additionally, ensure we pskb_may_pull() the whole skb as we need it to iterate over the options. Signed-off-by:
Vincent Bernat <vincent@bernat.im> Signed-off-by:
-
- 03 Apr, 2017 27 commits
-
-
Xin Long authored
Before when implementing sctp prsctp, SCTP_PR_STREAM_STATUS wasn't added, as it needs to save abandoned_(un)sent for every stream. After sctp stream reconf is added in sctp, assoc has structure sctp_stream_out to save per stream info. This patch is to add SCTP_PR_STREAM_STATUS by putting the prsctp per stream statistics into sctp_stream_out. v1->v2: fix an indent issue. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
David S. Miller authored
Salil Mehta says: ==================== net: hns: Misc. HNS Bug Fixes & Code Improvements This patch set introduces various HNS bug fixes, optimizations and code improvements. ==================== Signed-off-by: -
Salil authored
This patch fixes some checkpatch.pl script caught errors and warnings during the compilation time. Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
-
lipeng authored
There is a bug on Hip06 that tx ring interrupts packets count will be clear when drivers send data to tx ring, so that the tx packets count will never upgrade to packets line, and cause the interrupts engendered was delayed. Sometimes, it will cause sending performance lower than expected. To fix this bug, we set tx ring interrupts packets line to 1 forever, to avoid count clear. And set the gap time to 20us, to solve the problem that too many interrupts engendered when packets line is 1. This patch could advance the send performance on ARM from 6.6G to 9.37G when an iperf send thread on ARM and an iperf send thread on X86 for XGE. Signed-off-by:
lipeng <lipeng321@huawei.com> Signed-off-by:
-
Kejian Yan authored
HNS needs SMB Buffers to store at least two packets after sending pause frame because of the link delay. The MTU of HNS is 9728. As the processor user manual described, the SBM buffer threshold should be modified. Reported-by:
Ping Zhang <zhangping5@huawei.com> Signed-off-by:
Kejian Yan <yankejian@huawei.com> Reviewed-by:
-
Kejian Yan authored
We need to free all ppe submodule if it fails to initialize ppe by any fault, so this patch will free all ppe resource before hns_ppe_init() returns exception situation Reported-by:
JinchuanTian <tianjinchuan1@huawei.com> Signed-off-by:
-
Kejian Yan authored
This patch fixes the code to clear pclint warning/info. Reported-by:
-
Kejian Yan authored
This patch cleans the redundant code from hns_mdio.c. Reported-by:
-
Kejian Yan authored
This patch removes redundant functions used only for debugging purposes. Reported-by:
Weiwei Deng <dengweiwei@huawei.com> Signed-off-by:
-
Kejian Yan authored
There is a mac_id in mac control block structure, so the callback function mac_get_id() is useless. Here we remove this function. Reported-by:
-
Kejian Yan authored
The functions (hns_dsaf_set_mac_mc_entry() and hns_mac_del_mac()) are not called by any functions. They are dead code in hns. And the same features are implemented by the patch (the id is 66355f52). Reported-by:
-
lipeng authored
This patch fixes below ethtool configuration error: localhost:~ # ethtool -X eth0 hkey XX:XX:XX... Cannot set Rx flow hash configuration: Operation not supported Signed-off-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
-
lipeng authored
netif_tx_lock is a global spin lock, it will take affect in all rings in the netdevice. In tx_poll_one process, it can only lock the current ring, in this case, we define a spin lock in hnae_ring struct for it. Signed-off-by:
-
lipeng authored
Because buf_size of ring set to 2048, the process of rx_poll_one can reuse the page, therefore the performance of XGE can improve. But the chip only supports three bds in one package, so the max mtu is 6K when it sets to 2048. For better performane in litter mtu, we need change buf_size according to mtu. When user change mtu, hns is only change the desc in memory. There are some desc has been fetched by the chip, these desc can not be changed by the code. So it needs set the port loopback and send some packages to let the chip consumes the wrong desc and fetch new desc. Because the Pv660 do not support rss indirection, we need add version check in mtu change process. Signed-off-by:
-
lipeng authored
After polling less than buget packages, we need check again. If there are still some packages, we call napi_schedule add softirq queue, this is not better way. So we return buget value instead of napi_schedule. Signed-off-by:
-
Daode Huang authored
When run ethtool ethX on hns driver, the speed will show as "Unknown". The base.speed is not correct assigned, this patch fix this bug. Signed-off-by:
Daode Huang <huangdaode@hisilicon.com> Reviewed-by:
-
lipeng authored
Because all members of desc_cb is assigned when xmit one package, so it can delete in hnae_free_buffer, as follows: - "dma, priv, length, type" are assigned in fill_v2_desc. - "page_offset, reuse_flag, buf" are not used in tx direction. Signed-off-by: -
lipeng authored
This patch optimises the init configuration code leg for gmac pad and crc set interface. Signed-off-by:
-
lipeng authored
This patch reduces GMAC TX threshold value to avoid gmac hang-up with speed 100M/duplex half. Signed-off-by:
-
lipeng authored
This patch fixes the implementation of the IRQ affinity function. This function is used to create the cpu mask which eventually is used to initialize the cpu<->queue association for XPS(Transmit Packet Steering). Signed-off-by:
-
David S. Miller authored
Sowmini Varadhan says: ==================== rds: tcp: couple of minor bug fixes A couple of minor bugfixes that showed up during testing ==================== Signed-off-by: -
Sowmini Varadhan authored
The rds_connect_worker() has a bug in the check that enforces the canonical connection order described in the comments of rds_tcp_state_change(). The intention is to make sure that all the multipath connections are always initiated by the smaller IP address via rds_start_mprds. To achieve this, rds_connection_worker should check that cp_index > 0. Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Sowmini Varadhan authored
rds: tcp: allow progress of rds_conn_shutdown if the rds_connection is marked ERROR by an intervening FIN rds_conn_shutdown() runs in workq context, and marks the rds_connection as DISCONNECTING before quiescing Tx/Rx paths. However, after all I/O has quiesced, we may still find the rds_connection state to be RDS_CONN_ERROR if an intervening FIN was processed in softirq context. This is not a fatal error: rds_conn_shutdown() should continue the shutdown, and there is no need to log noisy messages about this event. Signed-off-by:
-
Eric Dumazet authored
It seems the code does not match the intent. This broke packetdrill, and probably other programs. Fixes: 6c7c98ba ("sock: avoid dirtying sk_stamp, if possible") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Acked-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Andrew Morton authored
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c: In function 'mlx5e_set_rxfh': drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1067: error: unknown field 'rss' specified in initializer drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1067: warning: missing braces around initializer drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1067: warning: (near initialization for 'rrp.<anonymous>') drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1068: error: unknown field 'rss' specified in initializer drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1069: warning: excess elements in struct initializer drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1069: warning: (near initialization for 'rrp') gcc-4.4.4 has issues with anonymous union initializers. Work around this. Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Andrew Morton authored
drivers/net/ethernet/mellanox/mlx5/core/en_main.c: In function 'mlx5e_redirect_rqts': drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2210: error: unknown field 'rqn' specified in initializer drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2211: warning: missing braces around initializer drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2211: warning: (near initialization for 'direct_rrp.<anonymous>') drivers/net/ethernet/mellanox/mlx5/core/en_main.c: In function 'mlx5e_redirect_rqts_to_channels': drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2227: error: unknown field 'rss' specified in initializer drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2227: warning: missing braces around initializer drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2227: warning: (near initialization for 'rrp.<anonymous>') drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2227: warning: initialization makes integer from pointer without a cast drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2228: error: unknown field 'rss' specified in initializer drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2229: warning: excess elements in struct initializer drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2229: warning: (near initialization for 'rrp') drivers/net/ethernet/mellanox/mlx5/core/en_main.c: In function 'mlx5e_redirect_rqts_to_drop': drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2238: error: unknown field 'rqn' specified in initializer drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2239: warning: missing braces around initializer drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2239: warning: (near initialization for 'drop_rrp.<anonymous>') gcc-4.4.4 has issues with anonymous union initializers. Work around this. Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Joao Pinto authored
Sending again, because forgot to include net-dev. The QoS IP does not accept AVB capabilities to default/queue 0, this way we guarantee 75% bandwidth for AVB. This patch assures that only queues >= 1 gets CBS confgured. Additional info was also added to stmmac.txt. Reported-by:
Niklas Cassel <niklas.cassel@axis.com> Signed-off-by:
Joao Pinto <jpinto@synopsys.com> Signed-off-by:
-
- 02 Apr, 2017 2 commits
-
-
David S. Miller authored
David Ahern says: ==================== net: mpls: Allow users to configure more labels per route Increase the maximum number of new labels for MPLS routes from 2 to 30. To keep memory consumption in check, the labels array is moved to the end of mpls_nh and mpls_iptunnel_encap structs as a 0-sized array. Allocations use the maximum number of labels across all nexthops in a route for LSR and the number of labels configured for LWT. The mpls_route layout is changed to: +----------------------+ | mpls_route | +----------------------+ | mpls_nh 0 | +----------------------+ | alignment padding | 4 bytes for odd number of labels; 0 for even +----------------------+ | via[rt_max_alen] 0 | +----------------------+ | alignment padding | via's aligned on sizeof(unsigned long) +----------------------+ | ... | Meaning the via follows its mpls_nh providing better locality as the number of labels increases. UDP_RR tests with namespaces shows no impact to a modest performance increase with this layout for 1 or 2 labels and 1 or 2 nexthops. mpls_route allocation size is limited to 4096 bytes allowing on the order of 30 nexthops with 30 labels (or more nexthops with fewer labels). LWT encap shares same maximum number of labels as mpls routing. v3 - initialize n_labels to 0 in case RTA_NEWDST is not defined; detected by the kbuild test robot v2 - updates per Eric's comments + added patch to ensure all reads of rt_nhn_alive and nh_flags in the packet path use READ_ONCE and all writes via event handlers use WRITE_ONCE + limit mpls_route size to 4096 (PAGE_SIZE for most arch) + mostly killed use of MAX_NEW_LABELS; it exists only for common limit between lwt and routing paths ==================== Signed-off-by: -
David Ahern authored
Alow users to push down more labels per MPLS encap. Similar to LSR case, move label array to the end of mpls_iptunnel_encap and allocate based on the number of labels for the route. For consistency with the LSR case, re-use the same maximum number of labels. Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
