1. 09 Feb, 2017 26 commits
  2. 08 Feb, 2017 6 commits
    • Bryant G. Ly's avatar
      ibmvscsis: Add SGL limit · b22bc278
      Bryant G. Ly authored
      This patch adds internal LIO sgl limit since the driver already
      sets a max transfer limit on transport layer of 1MB to the client.
      
      Cc: stable@vger.kernel.org
      Tested-by: default avatarSteven Royer <seroyer@linux.vnet.ibm.com>
      Signed-off-by: default avatarBryant G. Ly <bryantly@linux.vnet.ibm.com>
      Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      b22bc278
    • Nicholas Bellinger's avatar
      target: Fix COMPARE_AND_WRITE ref leak for non GOOD status · 9b2792c3
      Nicholas Bellinger authored
      This patch addresses a long standing bug where the commit phase
      of COMPARE_AND_WRITE would result in a se_cmd->cmd_kref reference
      leak if se_cmd->scsi_status returned non SAM_STAT_GOOD.
      
      This would manifest first as a lost SCSI response, and eventual
      hung task during fabric driver logout or re-login, as existing
      shutdown logic waited for the COMPARE_AND_WRITE se_cmd->cmd_kref
      to reach zero.
      
      To address this bug, compare_and_write_post() has been changed
      to drop the incorrect !cmd->scsi_status conditional that was
      preventing *post_ret = 1 for being set during non SAM_STAT_GOOD
      status.
      
      This patch has been tested with SAM_STAT_CHECK_CONDITION status
      from normal target_complete_cmd() callback path, as well as the
      incoming __target_execute_cmd() submission failure path when
      se_cmd->execute_cmd() returns non zero status.
      Reported-by: default avatarDonald White <dew@datera.io>
      Cc: Donald White <dew@datera.io>
      Tested-by: default avatarGary Guo <ghg@datera.io>
      Cc: Gary Guo <ghg@datera.io>
      Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      Cc: <stable@vger.kernel.org> # v3.12+
      Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      9b2792c3
    • Nicholas Bellinger's avatar
      target: Fix multi-session dynamic se_node_acl double free OOPs · 01d4d673
      Nicholas Bellinger authored
      This patch addresses a long-standing bug with multi-session
      (eg: iscsi-target + iser-target) se_node_acl dynamic free
      withini transport_deregister_session().
      
      This bug is caused when a storage endpoint is configured with
      demo-mode (generate_node_acls = 1 + cache_dynamic_acls = 1)
      initiators, and initiator login creates a new dynamic node acl
      and attaches two sessions to it.
      
      After that, demo-mode for the storage instance is disabled via
      configfs (generate_node_acls = 0 + cache_dynamic_acls = 0) and
      the existing dynamic acl is never converted to an explicit ACL.
      
      The end result is dynamic acl resources are released twice when
      the sessions are shutdown in transport_deregister_session().
      
      If the storage instance is not changed to disable demo-mode,
      or the dynamic acl is converted to an explict ACL, or there
      is only a single session associated with the dynamic ACL,
      the bug is not triggered.
      
      To address this big, move the release of dynamic se_node_acl
      memory into target_complete_nacl() so it's only freed once
      when se_node_acl->acl_kref reaches zero.
      
      (Drop unnecessary list_del_init usage - HCH)
      Reported-by: default avatarRob Millner <rlm@daterainc.com>
      Tested-by: default avatarRob Millner <rlm@daterainc.com>
      Cc: Rob Millner <rlm@daterainc.com>
      Cc: stable@vger.kernel.org # 4.1+
      Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      01d4d673
    • Nicholas Bellinger's avatar
      target: Fix early transport_generic_handle_tmr abort scenario · c54eeffb
      Nicholas Bellinger authored
      This patch fixes a bug where incoming task management requests
      can be explicitly aborted during an active LUN_RESET, but who's
      struct work_struct are canceled in-flight before execution.
      
      This occurs when core_tmr_drain_tmr_list() invokes cancel_work_sync()
      for the incoming se_tmr_req->task_cmd->work, resulting in cmd->work
      for target_tmr_work() never getting invoked and the aborted TMR
      waiting indefinately within transport_wait_for_tasks().
      
      To address this case, perform a CMD_T_ABORTED check early in
      transport_generic_handle_tmr(), and invoke the normal path via
      transport_cmd_check_stop_to_fabric() to complete any TMR kthreads
      blocked waiting for CMD_T_STOP in transport_wait_for_tasks().
      
      Also, move the TRANSPORT_ISTATE_PROCESSING assignment earlier
      into transport_generic_handle_tmr() so the existing check in
      core_tmr_drain_tmr_list() avoids attempting abort the incoming
      se_tmr_req->task_cmd->work if it has already been queued into
      se_device->tmr_wq.
      Reported-by: default avatarRob Millner <rlm@daterainc.com>
      Tested-by: default avatarRob Millner <rlm@daterainc.com>
      Cc: Rob Millner <rlm@daterainc.com>
      Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      Cc: stable@vger.kernel.org # 3.14+
      Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      c54eeffb
    • Nicholas Bellinger's avatar
      target: Use correct SCSI status during EXTENDED_COPY exception · 0583c261
      Nicholas Bellinger authored
      This patch adds the missing target_complete_cmd() SCSI status
      parameter change in target_xcopy_do_work(), that was originally
      missing in commit 926317de.
      
      It correctly propigates up the correct SCSI status during
      EXTENDED_COPY exception cases, instead of always using the
      hardcoded SAM_STAT_CHECK_CONDITION from original code.
      
      This is required for ESX host environments that expect to
      hit SAM_STAT_RESERVATION_CONFLICT for certain scenarios,
      and SAM_STAT_CHECK_CONDITION results in non-retriable
      status for these cases.
      Reported-by: default avatarNixon Vincent <nixon.vincent@calsoftinc.com>
      Tested-by: default avatarNixon Vincent <nixon.vincent@calsoftinc.com>
      Cc: Nixon Vincent <nixon.vincent@calsoftinc.com>
      Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      Cc: stable@vger.kernel.org # 3.14+
      Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      0583c261
    • Nicholas Bellinger's avatar
      target: Don't BUG_ON during NodeACL dynamic -> explicit conversion · 391e2a6d
      Nicholas Bellinger authored
      After the v4.2+ RCU conversion to se_node_acl->lun_entry_hlist,
      a BUG_ON() was added in core_enable_device_list_for_node() to
      detect when the located orig->se_lun_acl contains an existing
      se_lun_acl pointer reference.
      
      However, this scenario can happen when a dynamically generated
      NodeACL is being converted to an explicit NodeACL, when the
      explicit NodeACL contains a different LUN mapping than the
      default provided by the WWN endpoint.
      
      So instead of triggering BUG_ON(), go ahead and fail instead
      following the original pre RCU conversion logic.
      Reported-by: default avatarBenjamin ESTRABAUD <ben.estrabaud@mpstor.com>
      Cc: Benjamin ESTRABAUD <ben.estrabaud@mpstor.com>
      Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      Cc: stable@vger.kernel.org # 4.2+
      Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      391e2a6d
  3. 05 Feb, 2017 1 commit
  4. 04 Feb, 2017 6 commits
  5. 03 Feb, 2017 1 commit