- 28 Feb, 2019 7 commits
-
-
Sheng Lan authored
It can be reproduced by following steps: 1. virtio_net NIC is configured with gso/tso on 2. configure nginx as http server with an index file bigger than 1M bytes 3. use tc netem to produce duplicate packets and delay: tc qdisc add dev eth0 root netem delay 100ms 10ms 30% duplicate 90% 4. continually curl the nginx http server to get index file on client 5. BUG_ON is seen quickly [10258690.371129] kernel BUG at net/core/skbuff.c:4028! [10258690.371748] invalid opcode: 0000 [#1] SMP PTI [10258690.372094] CPU: 5 PID: 0 Comm: swapper/5 Tainted: G W 5.0.0-rc6 #2 [10258690.372094] RSP: 0018:ffffa05797b43da0 EFLAGS: 00010202 [10258690.372094] RBP: 00000000000005ea R08: 0000000000000000 R09: 00000000000005ea [10258690.372094] R10: ffffa0579334d800 R11: 00000000000002c0 R12: 0000000000000002 [10258690.372094] R13: 0000000000000000 R14: ffffa05793122900 R15: ffffa0578f7cb028 [10258690.372094] FS: 0000000000000000(0000) GS:ffffa05797b40000(0000) knlGS:0000000000000000 [10258690.372094] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [10258690.372094] CR2: 00007f1a6dc00868 CR3: 000000001000e000 CR4: 00000000000006e0 [10258690.372094] Call Trace: [10258690.372094] <IRQ> [10258690.372094] skb_to_sgvec+0x11/0x40 [10258690.372094] start_xmit+0x38c/0x520 [virtio_net] [10258690.372094] dev_hard_start_xmit+0x9b/0x200 [10258690.372094] sch_direct_xmit+0xff/0x260 [10258690.372094] __qdisc_run+0x15e/0x4e0 [10258690.372094] net_tx_action+0x137/0x210 [10258690.372094] __do_softirq+0xd6/0x2a9 [10258690.372094] irq_exit+0xde/0xf0 [10258690.372094] smp_apic_timer_interrupt+0x74/0x140 [10258690.372094] apic_timer_interrupt+0xf/0x20 [10258690.372094] </IRQ> In __skb_to_sgvec(), the skb->len is not equal to the sum of the skb's linear data size and nonlinear data size, thus BUG_ON triggered. Because the skb is cloned and a part of nonlinear data is split off. Duplicate packet is cloned in netem_enqueue() and may be delayed some time in qdisc. When qdisc len reached the limit and returns NET_XMIT_DROP, the skb will be retransmit later in write queue. the skb will be fragmented by tso_fragment(), the limit size that depends on cwnd and mss decrease, the skb's nonlinear data will be split off. The length of the skb cloned by netem will not be updated. When we use virtio_net NIC and invoke skb_to_sgvec(), the BUG_ON trigger. To fix it, netem returns NET_XMIT_SUCCESS to upper stack when it clones a duplicate packet. Fixes: 35d889d1 ("sch_netem: fix skb leak in netem_enqueue()") Signed-off-by: Sheng Lan <lansheng@huawei.com> Reported-by: Qin Ji <jiqin.ji@huawei.com> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paul Moore authored
There are two array out-of-bounds memory accesses, one in cipso_v4_map_lvl_valid(), the other in netlbl_bitmap_walk(). Both errors are embarassingly simple, and the fixes are straightforward. As a FYI for anyone backporting this patch to kernels prior to v4.8, you'll want to apply the netlbl_bitmap_walk() patch to cipso_v4_bitmap_walk() as netlbl_bitmap_walk() doesn't exist before Linux v4.8. Reported-by: Jann Horn <jannh@google.com> Fixes: 446fda4f ("[NetLabel]: CIPSOv4 engine") Fixes: 3faa8f98 ("netlabel: Move bitmap manipulation functions to the NetLabel core.") Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
ip_route_input_rcu expects the original ingress device (e.g., for proper multicast handling). The skb->dev can be changed by l3mdev_ip_rcv, so dev needs to be saved prior to calling it. This was the behavior prior to the listify changes. Fixes: 5fa12739 ("net: ipv4: listify ip_rcv_finish") Cc: Edward Cree <ecree@solarflare.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Paolo Abeni says: ==================== selftests: pmtu: fix and increase coverage This series includes a fixup for the pmtu.sh test script, related to IPv6 address management, and adds coverage for the recently reported and fixed PMTU exception issue v2 -> v3: - more cleanups v1 -> v2: - several script cleanups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
Add a couple of new tests, explicitly checking that the kernel timely releases PMTU exceptions on related device removal. This is mostly a regression test vs the issue fixed by commit f5b51fe8 ("ipv6: route: purge exception on removal") Only 2 new test cases have been added, instead of extending all the existing ones, because the reproducer requires executing several commands and would slow down too much the tests otherwise. v2 -> v3: - more cleanup, still from Stefano v1 -> v2: - several script cleanups, as suggested by Stefano Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
Otherwise, the configured IPv6 address could be still "tentative" at test time, possibly causing tests failures. We can also drop some sleep along the code and decrease the timeout for most commands so that the test runtime decreases. v1 -> v2: - fix comment (Stefano) Fixes: d1f1b9cb ("selftests: net: Introduce first PMTU test") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Max Uvarov authored
Similar to dp83640 delay after soft reset is needed to set up registers correctly. Signed-off-by: Max Uvarov <muvarov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 27 Feb, 2019 5 commits
-
-
YueHaibing authored
KASAN report this: BUG: KASAN: null-ptr-deref in nfc_llcp_build_gb+0x37f/0x540 [nfc] Read of size 3 at addr 0000000000000000 by task syz-executor.0/5401 CPU: 0 PID: 5401 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 kasan_report+0x171/0x18d mm/kasan/report.c:321 memcpy+0x1f/0x50 mm/kasan/common.c:130 nfc_llcp_build_gb+0x37f/0x540 [nfc] nfc_llcp_register_device+0x6eb/0xb50 [nfc] nfc_register_device+0x50/0x1d0 [nfc] nfcsim_device_new+0x394/0x67d [nfcsim] ? 0xffffffffc1080000 nfcsim_init+0x6b/0x1000 [nfcsim] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f9cb79dcc58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000280 RDI: 0000000000000003 RBP: 00007f9cb79dcc70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f9cb79dd6bc R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004 nfc_llcp_build_tlv will return NULL on fails, caller should check it, otherwise will trigger a NULL dereference. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: eda21f16 ("NFC: Set MIU and RW values from CONNECT and CC LLCP frames") Fixes: d646960f ("NFC: Initial LLCP support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rajasingh Thavamani authored
With Micrel KSZ8061 PHY, the link may occasionally not come up after Ethernet cable connect. The vendor's (Microchip, former Micrel) errata sheet 80000688A.pdf descripes the problem and possible workarounds in detail, see below. The batch implements workaround 1, which permanently fixes the issue. DESCRIPTION Link-up may not occur properly when the Ethernet cable is initially connected. This issue occurs more commonly when the cable is connected slowly, but it may occur any time a cable is connected. This issue occurs in the auto-negotiation circuit, and will not occur if auto-negotiation is disabled (which requires that the two link partners be set to the same speed and duplex). END USER IMPLICATIONS When this issue occurs, link is not established. Subsequent cable plug/unplaug cycle will not correct the issue. WORk AROUND There are four approaches to work around this issue: 1. This issue can be prevented by setting bit 15 in MMD device address 1, register 2, prior to connecting the cable or prior to setting the Restart Auto-negotiation bit in register 0h. The MMD registers are accessed via the indirect access registers Dh and Eh, or via the Micrel EthUtil utility as shown here: . if using the EthUtil utility (usually with a Micrel KSZ8061 Evaluation Board), type the following commands: > address 1 > mmd 1 > iw 2 b61a . Alternatively, write the following registers to write to the indirect MMD register: Write register Dh, data 0001h Write register Eh, data 0002h Write register Dh, data 4001h Write register Eh, data B61Ah 2. The issue can be avoided by disabling auto-negotiation in the KSZ8061, either by the strapping option, or by clearing bit 12 in register 0h. Care must be taken to ensure that the KSZ8061 and the link partner will link with the same speed and duplex. Note that the KSZ8061 defaults to full-duplex when auto-negotiation is off, but other devices may default to half-duplex in the event of failed auto-negotiation. 3. The issue can be avoided by connecting the cable prior to powering-up or resetting the KSZ8061, and leaving it plugged in thereafter. 4. If the above measures are not taken and the problem occurs, link can be recovered by setting the Restart Auto-Negotiation bit in register 0h, or by resetting or power cycling the device. Reset may be either hardware reset or software reset (register 0h, bit 15). PLAN This errata will not be corrected in the future revision. Fixes: 7ab59dc1 ("drivers/net/phy/micrel_phy: Add support for new PHYs") Signed-off-by: Alexander Onnasch <alexander.onnasch@landisgyr.com> Signed-off-by: Rajasingh Thavamani <T.Rajasingh@landisgyr.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andy Shevchenko authored
The netif_msg_init() API takes on input the amount of bits to be set. The description of debug parameter in the enc28j60 module is misleading in this sense and passing 0xffff does not give an expected behaviour. Fix the description of debug module parameter to show what exactly is expected. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andy Shevchenko authored
1 << 31 is Undefined Behaviour according to the C standard. Use U type modifier to avoid theoretical overflow. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
There have been reports of oversize UDP packets being sent to the driver to be transmitted, causing error conditions. The issue is likely caused by the dst of the SKB switching between 'lo' with 64K MTU and the hardware device with a smaller MTU. Patches are being proposed by Mahesh Bandewar <maheshb@google.com> to fix the issue. In the meantime, add a quick length check in the driver to prevent the error. The driver uses the TX packet size as index to look up an array to setup the TX BD. The array is large enough to support all MTU sizes supported by the driver. The oversize TX packet causes the driver to index beyond the array and put garbage values into the TX BD. Add a simple check to prevent this. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 26 Feb, 2019 6 commits
-
-
Tung Nguyen authored
When sending multicast messages via blocking socket, if sending link is congested (tsk->cong_link_cnt is set to 1), the sending thread will be put into sleeping state. However, tipc_sk_filter_rcv() is called under socket spin lock but tipc_wait_for_cond() is not. So, there is no guarantee that the setting of tsk->cong_link_cnt to 0 in tipc_sk_proto_rcv() in CPU-1 will be perceived by CPU-0. If that is the case, the sending thread in CPU-0 after being waken up, will continue to see tsk->cong_link_cnt as 1 and put the sending thread into sleeping state again. The sending thread will sleep forever. CPU-0 | CPU-1 tipc_wait_for_cond() | { | // condition_ = !tsk->cong_link_cnt | while ((rc_ = !(condition_))) { | ... | release_sock(sk_); | wait_woken(); | | if (!sock_owned_by_user(sk)) | tipc_sk_filter_rcv() | { | ... | tipc_sk_proto_rcv() | { | ... | tsk->cong_link_cnt--; | ... | sk->sk_write_space(sk); | ... | } | ... | } sched_annotate_sleep(); | lock_sock(sk_); | remove_wait_queue(); | } | } | This commit fixes it by adding memory barrier to tipc_sk_proto_rcv() and tipc_wait_for_cond(). Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Haiyang Zhang authored
Incoming packets may have IP header checksum verified by the host. They may not have IP header checksum computed after coalescing. This patch re-compute the checksum when necessary, otherwise the packets may be dropped, because Linux network stack always checks it. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
David Ahern says: ==================== net: Fail route add with unsupported nexthop attribute RTA_VIA was added for MPLS as a way of specifying a gateway from a different address family. IPv4 and IPv6 do not currently support RTA_VIA so using it leads to routes that are not what the user intended. Catch and fail - returning a proper error message. MPLS on the other hand does not support RTA_GATEWAY since it does not make sense to have a nexthop from the MPLS address family. Similarly, catch and fail - returning a proper error message. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
MPLS does not support nexthops with an MPLS address family. Specifically, it does not handle RTA_GATEWAY attribute. Make it clear by returning an error. Fixes: 03c05665 ("mpls: Netlink commands to add, remove, and dump routes") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
IPv6 currently does not support nexthops outside of the AF_INET6 family. Specifically, it does not handle RTA_VIA attribute. If it is passed in a route add request, the actual route added only uses the device which is clearly not what the user intended: $ ip -6 ro add 2001:db8:2::/64 via inet 172.16.1.1 dev eth0 $ ip ro ls ... 2001:db8:2::/64 dev eth0 metric 1024 pref medium Catch this and fail the route add: $ ip -6 ro add 2001:db8:2::/64 via inet 172.16.1.1 dev eth0 Error: IPv6 does not support RTA_VIA attribute. Fixes: 03c05665 ("mpls: Netlink commands to add, remove, and dump routes") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
IPv4 currently does not support nexthops outside of the AF_INET family. Specifically, it does not handle RTA_VIA attribute. If it is passed in a route add request, the actual route added only uses the device which is clearly not what the user intended: $ ip ro add 172.16.1.0/24 via inet6 2001:db8:1::1 dev eth0 $ ip ro ls ... 172.16.1.0/24 dev eth0 Catch this and fail the route add: $ ip ro add 172.16.1.0/24 via inet6 2001:db8:1::1 dev eth0 Error: IPv4 does not support RTA_VIA attribute. Fixes: 03c05665 ("mpls: Netlink commands to add, remove, and dump routes") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 25 Feb, 2019 10 commits
-
-
Nazarov Sergey authored
Extract IP options in cipso_v4_error and use __icmp_send. Signed-off-by: Sergey Nazarov <s-nazarov@yandex.ru> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nazarov Sergey authored
Add __icmp_send function having ip_options struct parameter Signed-off-by: Sergey Nazarov <s-nazarov@yandex.ru> Reviewed-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Timur Celik authored
Replace set_current_state with __set_current_state since no memory barrier is needed at this point. Signed-off-by: Timur Celik <mail@timurcelik.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Biggers authored
Commit 9060cb71 ("net: crypto set sk to NULL when af_alg_release.") fixed a use-after-free in sockfs_setattr() when an AF_ALG socket is closed concurrently with fchownat(). However, it ignored that many other proto_ops::release() methods don't set sock->sk to NULL and therefore allow the same use-after-free: - base_sock_release - bnep_sock_release - cmtp_sock_release - data_sock_release - dn_release - hci_sock_release - hidp_sock_release - iucv_sock_release - l2cap_sock_release - llcp_sock_release - llc_ui_release - rawsock_release - rfcomm_sock_release - sco_sock_release - svc_release - vcc_release - x25_release Rather than fixing all these and relying on every socket type to get this right forever, just make __sock_release() set sock->sk to NULL itself after calling proto_ops::release(). Reproducer that produces the KASAN splat when any of these socket types are configured into the kernel: #include <pthread.h> #include <stdlib.h> #include <sys/socket.h> #include <unistd.h> pthread_t t; volatile int fd; void *close_thread(void *arg) { for (;;) { usleep(rand() % 100); close(fd); } } int main() { pthread_create(&t, NULL, close_thread, NULL); for (;;) { fd = socket(rand() % 50, rand() % 11, 0); fchownat(fd, "", 1000, 1000, 0x1000); close(fd); } } Fixes: 86741ec2 ("net: core: Add a UID field to struct sock.") Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vlad Buslov authored
Metadata pointer is only initialized for action TCA_TUNNEL_KEY_ACT_SET, but it is unconditionally dereferenced in tunnel_key_init() error handler. Verify that metadata pointer is not NULL before dereferencing it in tunnel_key_init error handling code. Fixes: ee28bb56 ("net/sched: fix memory leak in act_tunnel_key_init()") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wen Yang authored
The call to of_parse_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./net/dsa/port.c:294:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 284, but without a corresponding object release within this function. ./net/dsa/dsa2.c:627:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 618, but without a corresponding object release within this function. ./net/dsa/dsa2.c:630:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 618, but without a corresponding object release within this function. ./net/dsa/dsa2.c:636:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 618, but without a corresponding object release within this function. ./net/dsa/dsa2.c:639:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 618, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
-
Timur Celik authored
This patch moves setting of the current state into the loop. Otherwise the task may end up in a busy wait loop if none of the break conditions are met. Signed-off-by: Timur Celik <mail@timurcelik.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hauke Mehrtens authored
This adds the file names of the FW files which this driver handles into the module description. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Davide Caratti authored
when act_skbedit was converted to use RCU in the data plane, we added an error path, but we forgot to drop the action refcount in case of failure during a 'replace' operation: # tc actions add action skbedit ptype otherhost pass index 100 # tc action show action skbedit total acts 1 action order 0: skbedit ptype otherhost pass index 100 ref 1 bind 0 # tc actions replace action skbedit ptype otherhost drop index 100 RTNETLINK answers: Cannot allocate memory We have an error talking to the kernel # tc action show action skbedit total acts 1 action order 0: skbedit ptype otherhost pass index 100 ref 2 bind 0 Ensure we call tcf_idr_release(), in case 'params_new' allocation failed, also when the action is being replaced. Fixes: c749cdda ("net/sched: act_skbedit: don't use spinlock in the data path") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Davide Caratti authored
After commit 4e8ddd7f ("net: sched: don't release reference on action overwrite"), the error path of all actions was converted to drop refcount also when the action was being overwritten. But we forgot act_ipt_init(), in case allocation of 'tname' was not successful: # tc action add action xt -j LOG --log-prefix hello index 100 tablename: mangle hook: NF_IP_POST_ROUTING target: LOG level warning prefix "hello" index 100 # tc action show action xt total acts 1 action order 0: tablename: mangle hook: NF_IP_POST_ROUTING target LOG level warning prefix "hello" index 100 ref 1 bind 0 # tc action replace action xt -j LOG --log-prefix world index 100 tablename: mangle hook: NF_IP_POST_ROUTING target: LOG level warning prefix "world" index 100 RTNETLINK answers: Cannot allocate memory We have an error talking to the kernel # tc action show action xt total acts 1 action order 0: tablename: mangle hook: NF_IP_POST_ROUTING target LOG level warning prefix "hello" index 100 ref 2 bind 0 Ensure we call tcf_idr_release(), in case 'tname' allocation failed, also when the action is being replaced. Fixes: 4e8ddd7f ("net: sched: don't release reference on action overwrite") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 24 Feb, 2019 8 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "Bug fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: MMU: record maximum physical address width in kvm_mmu_extended_role kvm: x86: Return LA57 feature based on hardware capability x86/kvm/mmu: fix switch between root and guest MMUs s390: vsie: Use effective CRYCBD.31 to check CRYCBD validity
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Hopefully the last pull request for this release. Fingers crossed: 1) Only refcount ESP stats on full sockets, from Martin Willi. 2) Missing barriers in AF_UNIX, from Al Viro. 3) RCU protection fixes in ipv6 route code, from Paolo Abeni. 4) Avoid false positives in untrusted GSO validation, from Willem de Bruijn. 5) Forwarded mesh packets in mac80211 need more tailroom allocated, from Felix Fietkau. 6) Use operstate consistently for linkup in team driver, from George Wilkie. 7) ThunderX bug fixes from Vadim Lomovtsev. Mostly races between VF and PF code paths. 8) Purge ipv6 exceptions during netdevice removal, from Paolo Abeni. 9) nfp eBPF code gen fixes from Jiong Wang. 10) bnxt_en firmware timeout fix from Michael Chan. 11) Use after free in udp/udpv6 error handlers, from Paolo Abeni. 12) Fix a race in x25_bind triggerable by syzbot, from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits) net: phy: realtek: Dummy IRQ calls for RTL8366RB tcp: repaired skbs must init their tso_segs net/x25: fix a race in x25_bind() net: dsa: Remove documentation for port_fdb_prepare Revert "bridge: do not add port to router list when receives query with source 0.0.0.0" selftests: fib_tests: sleep after changing carrier. again. net: set static variable an initial value in atl2_probe() net: phy: marvell10g: Fix Multi-G advertisement to only advertise 10G bpf, doc: add bpf list as secondary entry to maintainers file udp: fix possible user after free in error handler udpv6: fix possible user after free in error handler fou6: fix proto error handler argument type udpv6: add the required annotation to mib type mdio_bus: Fix use-after-free on device_register fails net: Set rtm_table to RT_TABLE_COMPAT for ipv6 for tables > 255 bnxt_en: Wait longer for the firmware message response to complete. bnxt_en: Fix typo in firmware message timeout logic. nfp: bpf: fix ALU32 high bits clearance bug nfp: bpf: fix code-gen bug on BPF_ALU | BPF_XOR | BPF_K Documentation: networking: switchdev: Update port parent ID section ...
-
Linus Walleij authored
This fixes a regression introduced by commit 0d2e778e "net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt". This assumes that a PHY cannot trigger interrupt unless it has .config_intr() or .ack_interrupt() implemented. A later patch makes the code assume both need to be implemented for interrupts to be present. But this PHY (which is inside a DSA) will happily fire interrupts without either callback. Implement dummy callbacks for .config_intr() and .ack_interrupt() in the phy header to fix this. Tested on the RTL8366RB on D-Link DIR-685. Fixes: 0d2e778e ("net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt") Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
syzbot reported a WARN_ON(!tcp_skb_pcount(skb)) in tcp_send_loss_probe() [1] This was caused by TCP_REPAIR sent skbs that inadvertenly were missing a call to tcp_init_tso_segs() [1] WARNING: CPU: 1 PID: 0 at net/ipv4/tcp_output.c:2534 tcp_send_loss_probe+0x771/0x8a0 net/ipv4/tcp_output.c:2534 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.0.0-rc7+ #77 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 panic+0x2cb/0x65c kernel/panic.c:214 __warn.cold+0x20/0x45 kernel/panic.c:571 report_bug+0x263/0x2b0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:178 [inline] fixup_bug arch/x86/kernel/traps.c:173 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:271 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:290 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:973 RIP: 0010:tcp_send_loss_probe+0x771/0x8a0 net/ipv4/tcp_output.c:2534 Code: 88 fc ff ff 4c 89 ef e8 ed 75 c8 fb e9 c8 fc ff ff e8 43 76 c8 fb e9 63 fd ff ff e8 d9 75 c8 fb e9 94 f9 ff ff e8 bf 03 91 fb <0f> 0b e9 7d fa ff ff e8 b3 03 91 fb 0f b6 1d 37 43 7a 03 31 ff 89 RSP: 0018:ffff8880ae907c60 EFLAGS: 00010206 RAX: ffff8880a989c340 RBX: 0000000000000000 RCX: ffffffff85dedbdb RDX: 0000000000000100 RSI: ffffffff85dee0b1 RDI: 0000000000000005 RBP: ffff8880ae907c90 R08: ffff8880a989c340 R09: ffffed10147d1ae1 R10: ffffed10147d1ae0 R11: ffff8880a3e8d703 R12: ffff888091b90040 R13: ffff8880a3e8d540 R14: 0000000000008000 R15: ffff888091b90860 tcp_write_timer_handler+0x5c0/0x8a0 net/ipv4/tcp_timer.c:583 tcp_write_timer+0x10e/0x1d0 net/ipv4/tcp_timer.c:607 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325 expire_timers kernel/time/timer.c:1362 [inline] __run_timers kernel/time/timer.c:1681 [inline] __run_timers kernel/time/timer.c:1649 [inline] run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694 __do_softirq+0x266/0x95a kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0x180/0x1d0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0x14a/0x570 arch/x86/kernel/apic/apic.c:1062 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807 </IRQ> RIP: 0010:native_safe_halt+0x2/0x10 arch/x86/include/asm/irqflags.h:58 Code: ff ff ff 48 89 c7 48 89 45 d8 e8 59 0c a1 fa 48 8b 45 d8 e9 ce fe ff ff 48 89 df e8 48 0c a1 fa eb 82 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90 RSP: 0018:ffff8880a98afd78 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13 RAX: 1ffffffff1125061 RBX: ffff8880a989c340 RCX: 0000000000000000 RDX: dffffc0000000000 RSI: 0000000000000001 RDI: ffff8880a989cbbc RBP: ffff8880a98afda8 R08: ffff8880a989c340 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 R13: ffffffff889282f8 R14: 0000000000000001 R15: 0000000000000000 arch_cpu_idle+0x10/0x20 arch/x86/kernel/process.c:555 default_idle_call+0x36/0x90 kernel/sched/idle.c:93 cpuidle_idle_call kernel/sched/idle.c:153 [inline] do_idle+0x386/0x570 kernel/sched/idle.c:262 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:353 start_secondary+0x404/0x5c0 arch/x86/kernel/smpboot.c:271 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243 Kernel Offset: disabled Rebooting in 86400 seconds.. Fixes: 79861919 ("tcp: fix TCP_REPAIR xmit queue setup") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Andrey Vagin <avagin@openvz.org> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
syzbot was able to trigger another soft lockup [1] I first thought it was the O(N^2) issue I mentioned in my prior fix (f657d22ee1f "net/x25: do not hold the cpu too long in x25_new_lci()"), but I eventually found that x25_bind() was not checking SOCK_ZAPPED state under socket lock protection. This means that multiple threads can end up calling x25_insert_socket() for the same socket, and corrupt x25_list [1] watchdog: BUG: soft lockup - CPU#0 stuck for 123s! [syz-executor.2:10492] Modules linked in: irq event stamp: 27515 hardirqs last enabled at (27514): [<ffffffff81006673>] trace_hardirqs_on_thunk+0x1a/0x1c hardirqs last disabled at (27515): [<ffffffff8100668f>] trace_hardirqs_off_thunk+0x1a/0x1c softirqs last enabled at (32): [<ffffffff8632ee73>] x25_get_neigh+0xa3/0xd0 net/x25/x25_link.c:336 softirqs last disabled at (34): [<ffffffff86324bc3>] x25_find_socket+0x23/0x140 net/x25/af_x25.c:341 CPU: 0 PID: 10492 Comm: syz-executor.2 Not tainted 5.0.0-rc7+ #88 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__sanitizer_cov_trace_pc+0x4/0x50 kernel/kcov.c:97 Code: f4 ff ff ff e8 11 9f ea ff 48 c7 05 12 fb e5 08 00 00 00 00 e9 c8 e9 ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 <48> 8b 75 08 65 48 8b 04 25 40 ee 01 00 65 8b 15 38 0c 92 7e 81 e2 RSP: 0018:ffff88806e94fc48 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13 RAX: 1ffff1100d84dac5 RBX: 0000000000000001 RCX: ffffc90006197000 RDX: 0000000000040000 RSI: ffffffff86324bf3 RDI: ffff88806c26d628 RBP: ffff88806e94fc48 R08: ffff88806c1c6500 R09: fffffbfff1282561 R10: fffffbfff1282560 R11: ffffffff89412b03 R12: ffff88806c26d628 R13: ffff888090455200 R14: dffffc0000000000 R15: 0000000000000000 FS: 00007f3a107e4700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3a107e3db8 CR3: 00000000a5544000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __x25_find_socket net/x25/af_x25.c:327 [inline] x25_find_socket+0x7d/0x140 net/x25/af_x25.c:342 x25_new_lci net/x25/af_x25.c:355 [inline] x25_connect+0x380/0xde0 net/x25/af_x25.c:784 __sys_connect+0x266/0x330 net/socket.c:1662 __do_sys_connect net/socket.c:1673 [inline] __se_sys_connect net/socket.c:1670 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1670 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457e29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f3a107e3c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457e29 RDX: 0000000000000012 RSI: 0000000020000200 RDI: 0000000000000005 RBP: 000000000073c040 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f3a107e46d4 R13: 00000000004be362 R14: 00000000004ceb98 R15: 00000000ffffffff Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 10493 Comm: syz-executor.3 Not tainted 5.0.0-rc7+ #88 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__read_once_size include/linux/compiler.h:193 [inline] RIP: 0010:queued_write_lock_slowpath+0x143/0x290 kernel/locking/qrwlock.c:86 Code: 4c 8d 2c 01 41 83 c7 03 41 0f b6 45 00 41 38 c7 7c 08 84 c0 0f 85 0c 01 00 00 8b 03 3d 00 01 00 00 74 1a f3 90 41 0f b6 55 00 <41> 38 d7 7c eb 84 d2 74 e7 48 89 df e8 cc aa 4e 00 eb dd be 04 00 RSP: 0018:ffff888085c47bd8 EFLAGS: 00000206 RAX: 0000000000000300 RBX: ffffffff89412b00 RCX: 1ffffffff1282560 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff89412b00 RBP: ffff888085c47c70 R08: 1ffffffff1282560 R09: fffffbfff1282561 R10: fffffbfff1282560 R11: ffffffff89412b03 R12: 00000000000000ff R13: fffffbfff1282560 R14: 1ffff11010b88f7d R15: 0000000000000003 FS: 00007fdd04086700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fdd04064db8 CR3: 0000000090be0000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: queued_write_lock include/asm-generic/qrwlock.h:104 [inline] do_raw_write_lock+0x1d6/0x290 kernel/locking/spinlock_debug.c:203 __raw_write_lock_bh include/linux/rwlock_api_smp.h:204 [inline] _raw_write_lock_bh+0x3b/0x50 kernel/locking/spinlock.c:312 x25_insert_socket+0x21/0xe0 net/x25/af_x25.c:267 x25_bind+0x273/0x340 net/x25/af_x25.c:703 __sys_bind+0x23f/0x290 net/socket.c:1481 __do_sys_bind net/socket.c:1492 [inline] __se_sys_bind net/socket.c:1490 [inline] __x64_sys_bind+0x73/0xb0 net/socket.c:1490 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457e29 Fixes: 90c27297 ("X.25 remove bkl in bind") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: andrew hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hauke Mehrtens authored
This callback was removed some time ago, also remove the documentation. Fixes: 1b6dd556 ("net: dsa: Remove prepare phase for FDB") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hangbin Liu authored
This reverts commit 5a2de63f ("bridge: do not add port to router list when receives query with source 0.0.0.0") and commit 0fe5119e ("net: bridge: remove ipv6 zero address check in mcast queries") The reason is RFC 4541 is not a standard but suggestive. Currently we will elect 0.0.0.0 as Querier if there is no ip address configured on bridge. If we do not add the port which recives query with source 0.0.0.0 to router list, the IGMP reports will not be about to forward to Querier, IGMP data will also not be able to forward to dest. As Nikolay suggested, revert this change first and add a boolopt api to disable none-zero election in future if needed. Reported-by: Linus Lüssing <linus.luessing@c0d3.blue> Reported-by: Sebastian Gottschall <s.gottschall@newmedia-net.de> Fixes: 5a2de63f ("bridge: do not add port to router list when receives query with source 0.0.0.0") Fixes: 0fe5119e ("net: bridge: remove ipv6 zero address check in mcast queries") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thadeu Lima de Souza Cascardo authored
Just like commit e2ba732a ("selftests: fib_tests: sleep after changing carrier"), wait one second to allow linkwatch to propagate the carrier change to the stack. There are two sets of carrier tests. The first slept after the carrier was set to off, and when the second set ran, it was likely that the linkwatch would be able to run again without much delay, reducing the likelihood of a race. However, if you run 'fib_tests.sh -t carrier' on a loop, you will quickly notice the failures. Sleeping on the second set of tests make the failures go away. Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 23 Feb, 2019 4 commits
-
-
Mao Wenan authored
cards_found is a static variable, but when it enters atl2_probe(), cards_found is set to zero, the value is not consistent with last probe, so next behavior is not our expect. Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Maxime Chevallier authored
Some Marvell Alaska PHYs support 2.5G, 5G and 10G BaseT links. Their default behaviour is to advertise all of these modes, but at the moment, only 10GBaseT is supported. To prevent link partners from establishing link at that speed, clear these modes upon configuring aneg parameters. Fixes: 20b2af32 ("net: phy: add Marvell Alaska X 88X3310 10Gigabit PHY support") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reported-by: Russell King <linux@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fix from Michael Ellerman: "One fix for an oops when using SRIOV, introduced by the recent changes to support compound IOMMU groups. Thanks to Alexey Kardashevskiy" * tag 'powerpc-5.0-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/powernv/sriov: Register IOMMU groups for VFs
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Four small fixes: three in drivers and one in the core. The core fix is also minor in scope since the bug it fixes is only known to affect systems using SCSI reservations. Of the driver bugs, the libsas one is the most major because it can lead to multiple disks on the same expander not being exposed" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: core: reset host byte in DID_NEXUS_FAILURE case scsi: libsas: Fix rphy phy_identifier for PHYs with end devices attached scsi: sd_zbc: Fix sd_zbc_report_zones() buffer allocation scsi: libiscsi: Fix race between iscsi_xmit_task and iscsi_complete_task
-