- 21 Feb, 2021 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC platform removals from Arnd Bergmann: "There are a lot of platforms that have not seen any interesting code changes in the past five years or more. I made a list and asked around which ones are no longer in use, and received confirmation about six ARM platforms and the TI C6x architecture that have all reached the end of their life upstream, with no known users remaining: - efm32 - added in 2011, first Cortex-M, no notable changes after 2013 - picoxcell - added in 2011, abandoned after 2012 acquisition - prima2 - added in 20111, no notable changes since 2015 - tango - added in 2015, sporadic changes until 2017, but abandoned - u300 - added in 2009, no notable changes since 2013 - zx - added in 2015 for both 32, 2017 for 64 bit, no notable changes - arch/c6x - added in 2011, but work stalled soon after that A number of other platforms on the original list turned out to still have users. In some cases there are out-of-tree patches and users that plan to contribute them in the future, in other cases the code is complete and works reliably" Link: https://lore.kernel.org/lkml/CAK8P3a2DZ8xQp7R=H=wewHnT2=a_=M53QsZOueMVEf7tOZLKNg@mail.gmail.com/ * tag 'arm-platform-removal-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: remove u300 platform ARM: remove tango platform ARM: remove zte zx platform ARM: remove sirf prima2/atlas platforms c6x: remove architecture MAINTAINERS: Remove deleted platform efm32 ARM: drop efm32 platform ARM: Remove PicoXcell platform support ARM: dts: Remove PicoXcell platforms
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "There are only two left-over remaining non-urgent ARM SoC bug fixes: - A build fix for the Atmel SAM9 platform to allow building with the clang integrated assembler - A DT fix for ethernet on Intel SoCFPGA, this has been broken since it was added in v5.4" * tag 'arm-fixes-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: at91: use proper asm syntax in pm_suspend arm64: dts: agilex: fix phy interface bit shift for gmac1 and gmac2
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds authored
Pull networking updates from David Miller: "Here is what we have this merge window: 1) Support SW steering for mlx5 Connect-X6Dx, from Yevgeny Kliteynik. 2) Add RSS multi group support to octeontx2-pf driver, from Geetha Sowjanya. 3) Add support for KS8851 PHY. From Marek Vasut. 4) Add support for GarfieldPeak bluetooth controller from Kiran K. 5) Add support for half-duplex tcan4x5x can controllers. 6) Add batch skb rx processing to bcrm63xx_enet, from Sieng Piaw Liew. 7) Rework RX port offload infrastructure, particularly wrt, UDP tunneling, from Jakub Kicinski. 8) Add BCM72116 PHY support, from Florian Fainelli. 9) Remove Dsa specific notifiers, they are unnecessary. From Vladimir Oltean. 10) Add support for picosecond rx delay in dwmac-meson8b chips. From Martin Blumenstingl. 11) Support TSO on xfrm interfaces from Eyal Birger. 12) Add support for MP_PRIO to mptcp stack, from Geliang Tang. 13) Support BCM4908 integrated switch, from Rafał Miłecki. 14) Support for directly accessing kernel module variables via module BTF info, from Andrii Naryiko. 15) Add DASH (esktop and mobile Architecture for System Hardware) support to r8169 driver, from Heiner Kallweit. 16) Add rx vlan filtering to dpaa2-eth, from Ionut-robert Aron. 17) Add support for 100 base0x SFP devices, from Bjarni Jonasson. 18) Support link aggregation in DSA, from Tobias Waldekranz. 19) Support for bitwidse atomics in bpf, from Brendan Jackman. 20) SmartEEE support in at803x driver, from Russell King. 21) Add support for flow based tunneling to GTP, from Pravin B Shelar. 22) Allow arbitrary number of interconnrcts in ipa, from Alex Elder. 23) TLS RX offload for bonding, from Tariq Toukan. 24) RX decap offklload support in mac80211, from Felix Fietkou. 25) devlink health saupport in octeontx2-af, from George Cherian. 26) Add TTL attr to SCM_TIMESTAMP_OPT_STATS, from Yousuk Seung 27) Delegated actionss support in mptcp, from Paolo Abeni. 28) Support receive timestamping when doin zerocopy tcp receive. From Arjun Ray. 29) HTB offload support for mlx5, from Maxim Mikityanskiy. 30) UDP GRO forwarding, from Maxim Mikityanskiy. 31) TAPRIO offloading in dsa hellcreek driver, from Kurt Kanzenbach. 32) Weighted random twos choice algorithm for ipvs, from Darby Payne. 33) Fix netdev registration deadlock, from Johannes Berg. 34) Various conversions to new tasklet api, from EmilRenner Berthing. 35) Bulk skb allocations in veth, from Lorenzo Bianconi. 36) New ethtool interface for lane setting, from Danielle Ratson. 37) Offload failiure notifications for routes, from Amit Cohen. 38) BCM4908 support, from Rafał Miłecki. 39) Support several new iwlwifi chips, from Ihab Zhaika. 40) Flow drector support for ipv6 in i40e, from Przemyslaw Patynowski. 41) Support for mhi prrotocols, from Loic Poulain. 42) Optimize bpf program stats. 43) Implement RFC6056, for better port randomization, from Eric Dumazet. 44) hsr tag offloading support from George McCollister. 45) Netpoll support in qede, from Bhaskar Upadhaya. 46) 2005/400g speed support in bonding 3ad mode, from Nikolay Aleksandrov. 47) Netlink event support in mptcp, from Florian Westphal. 48) Better skbuff caching, from Alexander Lobakin. 49) MRP (Media Redundancy Protocol) offloading in DSA and a few drivers, from Horatiu Vultur. 50) mqprio saupport in mvneta, from Maxime Chevallier. 51) Remove of_phy_attach, no longer needed, from Florian Fainelli" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1766 commits) octeontx2-pf: Fix otx2_get_fecparam() cteontx2-pf: cn10k: Prevent harmless double shift bugs net: stmmac: Add PCI bus info to ethtool driver query output ptp: ptp_clockmatrix: clean-up - parenthesis around a == b are unnecessary ptp: ptp_clockmatrix: Simplify code - remove unnecessary `err` variable. ptp: ptp_clockmatrix: Coding style - tighten vertical spacing. ptp: ptp_clockmatrix: Clean-up dev_*() messages. ptp: ptp_clockmatrix: Remove unused header declarations. ptp: ptp_clockmatrix: Add alignment of 1 PPS to idtcm_perout_enable. ptp: ptp_clockmatrix: Add wait_for_sys_apll_dpll_lock. net: stmmac: dwmac-sun8i: Add a shutdown callback net: stmmac: dwmac-sun8i: Minor probe function cleanup net: stmmac: dwmac-sun8i: Use reset_control_reset net: stmmac: dwmac-sun8i: Remove unnecessary PHY power check net: stmmac: dwmac-sun8i: Return void from PHY unpower r8169: use macro pm_ptr net: mdio: Remove of_phy_attach() net: mscc: ocelot: select PACKING in the Kconfig net: re-solve some conflicts after net -> net-next merge net: dsa: tag_rtl4_a: Support also egress tags ...
-
- 17 Feb, 2021 24 commits
-
-
Dan Carpenter authored
Static checkers complained about an off by one read overflow in otx2_get_fecparam() and we applied two conflicting fixes for it. Correct: b0aae0bd ("octeontx2: Fix condition.") Wrong: 93efb0c6 ("octeontx2-pf: Fix out-of-bounds read in otx2_get_fecparam()") Revert the incorrect fix. Fixes: 93efb0c6 ("octeontx2-pf: Fix out-of-bounds read in otx2_get_fecparam()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
These defines are used with set_bit() and test_bit() which take a bit number. In other words, the code is doing: if (BIT(BIT(1)) & pf->hw.cap_flag) { This was done consistently so it did not cause a problem at runtime but it's still worth fixing. Fixes: facede82 ("octeontx2-pf: cn10k: Add mbox support for CN10K") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wong Vee Khee authored
This patch populates the PCI bus info in the ethtool driver query data. Users will be able to view PCI bus info using 'ethtool -i <interface>'. Signed-off-by: Wong Vee Khee <vee.khee.wong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Vincent Cheng says: ==================== ptp: ptp_clockmatrix: Fix output 1 PPS alignment. This series fixes a race condition that may result in the output clock not aligned to internal 1 PPS clock. Part of device initialization is to align the rising edge of output clocks to the internal rising edge of the 1 PPS clock. If the system APLL and DPLL are not locked when this alignment occurs, the alignment fails and a fixed offset between the internal 1 PPS clock and the output clock occurs. If a clock is dynamically enabled after power-up, the output clock also needs to be aligned to the internal 1 PPS clock. v3: Suggested by: Jakub Kicinski <kuba@kernel.org> - Remove unnecessary 'err' variable - Increase msleep()/loop accuracy by using jiffies in while() - No empty lines between variables - No empty lines between call and the if - parenthesis around a == b are unnecessary - Inconsistent \n usage in dev_() - Remove unnecessary empty line - Leave string format in place so static code checkers can validate arguments v2: Suggested by: Richard Cochran <richardcochran@gmail.com> - Added const to "char * fmt" - Break unrelated header change into separate patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vincent Cheng authored
Code clean-up. Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vincent Cheng authored
Code clean-up. Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vincent Cheng authored
Code clean-up. * Remove blank line between variable declarations. * Remove blank line between: err = blah(...) if (err) ... * Remove unnecessary blank line before/after loop constructs. Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vincent Cheng authored
Code clean-up. * Remove unnecessary \n termination from dev_*() messages. * Remove 'char *fmt' to define strings to stay within 80 column limit. Not needed since coding guidelines increased to 100 columns limit. Keeping format in place allows static code checkers to validate the arguments. * Tighten up vertical spacing. Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vincent Cheng authored
Removed unused header declarations. Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vincent Cheng authored
When enabling output using PTP_CLK_REQ_PEROUT, need to align the output clock to the internal 1 PPS clock. Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vincent Cheng authored
Part of the device initialization aligns the rising edge of the output clock to the internal 1 PPS clock. If the system APLL and DPLL is not locked, then the alignment will fail and there will be a fixed offset between the internal 1 PPS clock and the output clock. After loading the device firmware, poll the system APLL and DPLL for locked state prior to initialization, timing out after 2 seconds. Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Samuel Holland says: ==================== dwmac-sun8i cleanup and shutdown hook These patches clean up some things I noticed while fixing suspend/resume behavior. The first four are minor code improvements. The last one adds a shutdown hook to minimize power consumption on boards without a PMIC. Changes v1 to v2: - Note the assumption of exclusive reset controller access in patch 3 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Samuel Holland authored
The Ethernet MAC and PHY are usually major consumers of power on boards which may not be able to fully power off (those with no PMIC). Powering down the MAC and internal PHY saves power while these boards are "off". Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Samuel Holland authored
Adjust the spacing and use an explicit "return 0" in the success path to make the function easier to parse. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Samuel Holland authored
Use the appropriate function instead of reimplementing it, and update the error message to match the code. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Samuel Holland authored
sun8i_dwmac_unpower_internal_phy already checks if the PHY is powered, so there is no need to do it again here. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Samuel Holland authored
This is a deinitialization function that always returned zero, and that return value was always ignored. Have it return void instead. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
Use macro pm_ptr(), this helps to avoid some ifdeffery. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: 1) Add two helper functions to release one table and hooks from the netns and netlink event path. 2) Add table ownership infrastructure, this new infrastructure allows users to bind a table (and its content) to a process through the netlink socket. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
We have no in-tree users, also update the sfp-phylink.rst documentation to indicate that phy_attach_direct() is used instead of of_phy_attach(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
Ocelot now uses include/linux/dsa/ocelot.h which makes use of CONFIG_PACKING to pack/unpack bits into the Injection/Extraction Frame Headers. So it needs to explicitly select it, otherwise there might be build errors due to the missing dependency. Fixes: 40d3f295 ("net: mscc: ocelot: use common tag parsing code with DSA") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
-
Linus Walleij authored
Support also transmitting frames using the custom "8899 A" 4 byte tag. Qingfang came up with the solution: we need to pad the ethernet frame to 60 bytes using eth_skb_pad(), then the switch will happily accept frames with custom tags. Cc: Mauri Sandberg <sandberg@mailfence.com> Reported-by: DENG Qingfang <dqfext@gmail.com> Fixes: efd7fe68 ("net: dsa: tag_rtl4_a: Implement Realtek 4 byte A tag") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 16 Feb, 2021 13 commits
-
-
David S. Miller authored
Robert Hancock says: ==================== Broadcom PHY driver updates Updates to the Broadcom PHY driver related to use with copper SFP modules. Changed since v3: -fixed kerneldoc error Changed since v2: -Create flag for PHY on SFP module and use that rather than accessing attached_dev directly in PHY driver Changed since v1: -Reversed conditional to reduce indentation -Added missing setting of MII_BCM54XX_AUXCTL_MISC_WREN in MII_BCM54XX_AUXCTL_SHDWSEL_MISC register ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Robert Hancock authored
bcm54xx_config_init was modifying the PHY LED configuration to enable link and activity indications. However, some SFP modules (such as Bel-Fuse SFP-1GBT-06) have no LEDs but use the LED outputs to control the SFP LOS signal, and modifying the LED settings will cause the LOS output to malfunction. Skip this configuration for PHYs which are bound to an SFP bus. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Robert Hancock authored
Add a flag and helper function to indicate that a PHY device is part of an SFP module, which is set on attach. This can be used by PHY drivers to handle SFP-specific quirks or behavior. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Robert Hancock authored
The default configuration for the BCM54616S PHY may not match the desired mode when using 1000BaseX or SGMII interface modes, such as when it is on an SFP module. Add code to explicitly set the correct mode using programming sequences provided by Bel-Fuse: https://www.belfuse.com/resources/datasheets/powersolutions/ds-bps-sfp-1gbt-05-series.pdf https://www.belfuse.com/resources/datasheets/powersolutions/ds-bps-sfp-1gbt-06-series.pdfSigned-off-by: Robert Hancock <robert.hancock@calian.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sven Van Asbroeck authored
On cpu architectures w/o dma cache snooping, dma_unmap() is a is a very expensive operation, because its resulting sync needs to invalidate cpu caches. Increase efficiency/performance by syncing only those sections of the lan743x's rx ring buffers that are actually in use. Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Reviewed-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sven Van Asbroeck authored
The buffers in the lan743x driver's receive ring are always 9K, even when the largest packet that can be received (the mtu) is much smaller. This performs particularly badly on cpu archs without dma cache snooping (such as ARM): each received packet results in a 9K dma_{map|unmap} operation, which is very expensive because cpu caches need to be invalidated. Careful measurement of the driver rx path on armv7 reveals that the cpu spends the majority of its time waiting for cache invalidation. Optimize by keeping the rx ring buffer size as close as possible to the mtu. This limits the amount of cache that requires invalidation. This optimization would normally force us to re-allocate all ring buffers when the mtu is changed - a disruptive event, because it can only happen when the network interface is down. Remove the need to re-allocate all ring buffers by adding support for multi-buffer frames. Now any combination of mtu and ring buffer size will work. When the mtu changes from mtu1 to mtu2, consumed buffers of size mtu1 are lazily replaced by newly allocated buffers of size mtu2. These optimizations double the rx performance on armv7. Third parties report 3x rx speedup on armv8. Tested with iperf3 on a freescale imx6qp + lan7430, both sides set to mtu 1500 bytes, measure rx performance: Before: [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-20.00 sec 550 MBytes 231 Mbits/sec 0 After: [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-20.00 sec 1.33 GBytes 570 Mbits/sec 0 Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Reviewed-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
The following call path suggests that calling unregister_netdev on an interface that is up will first bring it down. enetc_pf_remove -> unregister_netdev -> unregister_netdevice_queue -> unregister_netdevice_many -> dev_close_many -> __dev_close_many -> enetc_close -> enetc_stop -> phylink_stop However, enetc first destroys the phylink instance, then calls unregister_netdev. This is already dissimilar to the setup (and error path teardown path) from enetc_pf_probe, but more than that, it is buggy because it is invalid to call phylink_stop after phylink_destroy. So let's first unregister the netdev (and let the .ndo_stop events consume themselves), then destroy the phylink instance, then free the netdev. Fixes: 71b77a7a ("enetc: Migrate to PHYLINK and PCS_LYNX") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Maxime Chevallier says: ==================== net: mvneta: implement basic MQPrio support This is V2 for the MQPrio support in mvneta. This small series adds basic support for mqprio offloading, by having the rx queueing mirroring the TCs based on VLAN prio fields. This was tested on Armada 3700, and proves useful to make sure high-priority traffic has a better chance not getting dropped when there's lots of packets incoming. The first patch of the series deals with the per-cpu interrupts on the armada 3700. Since they don't work, there were already some patches applied to keep all queue mappings to CPU0, but there still were some remaining mappings left to be dealt with. The second patch implements the MQPrio offloading for the receive path. Changes in V2 : - Add a Fixes tag for the first patch - Fix some warnings and the xmas tree in the second patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Maxime Chevallier authored
Implement a basic MQPrio support, inserting rules in RX that translate the TC to prio mapping into vlan prio to queues. The TX logic stays the same as when we don't offload the qdisc. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Maxime Chevallier authored
According to Errata #23 "The per-CPU GbE interrupt is limited to Core 0", we can't use the per-cpu interrupt mechanism on the Armada 3700 familly. This is correctly checked for RSS configuration, but the initial queue mapping is still done by having the queues spread across all the CPUs in the system, both in the init path and in the cpu_hotplug path. Fixes: 2636ac3c ("net: mvneta: Add network support for Armada 3700 SoC") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vlad Buslov authored
When police action is created by cls API tcf_exts_validate() first conditional that calls tcf_action_init_1() directly, the action idr is not updated according to latest changes in action API that require caller to commit newly created action to idr with tcf_idr_insert_many(). This results such action not being accessible through act API and causes crash reported by syzbot: ================================================================== BUG: KASAN: null-ptr-deref in instrument_atomic_read include/linux/instrumented.h:71 [inline] BUG: KASAN: null-ptr-deref in atomic_read include/asm-generic/atomic-instrumented.h:27 [inline] BUG: KASAN: null-ptr-deref in __tcf_idr_release net/sched/act_api.c:178 [inline] BUG: KASAN: null-ptr-deref in tcf_idrinfo_destroy+0x129/0x1d0 net/sched/act_api.c:598 Read of size 4 at addr 0000000000000010 by task kworker/u4:5/204 CPU: 0 PID: 204 Comm: kworker/u4:5 Not tainted 5.11.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x107/0x163 lib/dump_stack.c:120 __kasan_report mm/kasan/report.c:400 [inline] kasan_report.cold+0x5f/0xd5 mm/kasan/report.c:413 check_memory_region_inline mm/kasan/generic.c:179 [inline] check_memory_region+0x13d/0x180 mm/kasan/generic.c:185 instrument_atomic_read include/linux/instrumented.h:71 [inline] atomic_read include/asm-generic/atomic-instrumented.h:27 [inline] __tcf_idr_release net/sched/act_api.c:178 [inline] tcf_idrinfo_destroy+0x129/0x1d0 net/sched/act_api.c:598 tc_action_net_exit include/net/act_api.h:151 [inline] police_exit_net+0x168/0x360 net/sched/act_police.c:390 ops_exit_list+0x10d/0x160 net/core/net_namespace.c:190 cleanup_net+0x4ea/0xb10 net/core/net_namespace.c:604 process_one_work+0x98d/0x15f0 kernel/workqueue.c:2275 worker_thread+0x64c/0x1120 kernel/workqueue.c:2421 kthread+0x3b1/0x4a0 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:296 ================================================================== Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 204 Comm: kworker/u4:5 Tainted: G B 5.11.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x107/0x163 lib/dump_stack.c:120 panic+0x306/0x73d kernel/panic.c:231 end_report+0x58/0x5e mm/kasan/report.c:100 __kasan_report mm/kasan/report.c:403 [inline] kasan_report.cold+0x67/0xd5 mm/kasan/report.c:413 check_memory_region_inline mm/kasan/generic.c:179 [inline] check_memory_region+0x13d/0x180 mm/kasan/generic.c:185 instrument_atomic_read include/linux/instrumented.h:71 [inline] atomic_read include/asm-generic/atomic-instrumented.h:27 [inline] __tcf_idr_release net/sched/act_api.c:178 [inline] tcf_idrinfo_destroy+0x129/0x1d0 net/sched/act_api.c:598 tc_action_net_exit include/net/act_api.h:151 [inline] police_exit_net+0x168/0x360 net/sched/act_police.c:390 ops_exit_list+0x10d/0x160 net/core/net_namespace.c:190 cleanup_net+0x4ea/0xb10 net/core/net_namespace.c:604 process_one_work+0x98d/0x15f0 kernel/workqueue.c:2275 worker_thread+0x64c/0x1120 kernel/workqueue.c:2421 kthread+0x3b1/0x4a0 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:296 Kernel Offset: disabled Fix the issue by calling tcf_idr_insert_many() after successful action initialization. Fixes: 0fedc63f ("net_sched: commit action insertions together") Reported-by: syzbot+151e3e714d34ae4ce7e8@syzkaller.appspotmail.com Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== pull-request: mlx5-next 2021-02-16 The patches in this pr are already submitted and reviewed through the netdev and rdma mailing lists. The series includes mlx5 HW bits and definitions for mlx5 real time clock translation and handling in the mlx5 driver clock module to enable and support such mode [1] [1] https://patchwork.kernel.org/project/netdevbpf/patch/20210212223042.449816-7-saeed@kernel.org/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gary Guo authored
The changes made in eccd5403 is enough for xilinx_emaclite to run without problem on 64-bit systems. I have tested it on a Xilinx FPGA with RV64 softcore. The architecture limitation in Kconfig seems no longer necessary. A small change is included to print address with %lx instead of casting to int and print with %x. Signed-off-by: Gary Guo <gary@garyguo.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-