- 25 Jul, 2020 23 commits
-
-
Colin Ian King authored
The variable 'status' is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Link: https://lore.kernel.org/r/20200723142614.991416-1-colin.king@canonical.comSigned-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Addresses-Coverity: ("Unused value")
-
Varun Prakash authored
'tdata' pointer will never be NULL so remove NULL checks. Link: https://lore.kernel.org/r/1595505391-3335-1-git-send-email-varun@chelsio.comReported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
-
Finn Thain authored
Booting Linux with a Conner CP3200 drive attached to the MESH SCSI bus results in EH measures and a panic: [ 25.499838] mesh: configured for synchronous 5 MB/s [ 25.787154] mesh: performing initial bus reset... [ 29.867115] scsi host0: MESH [ 29.929527] mesh: target 0 synchronous at 3.6 MB/s [ 29.998763] scsi 0:0:0:0: Direct-Access CONNER CP3200-200mb-3.5 4040 PQ: 0 ANSI: 1 CCS [ 31.989975] sd 0:0:0:0: [sda] 415872 512-byte logical blocks: (213 MB/203 MiB) [ 32.070975] sd 0:0:0:0: [sda] Write Protect is off [ 32.137197] sd 0:0:0:0: [sda] Mode Sense: 5b 00 00 08 [ 32.209661] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.332708] sda: [mac] sda1 sda2 sda3 [ 32.417733] sd 0:0:0:0: [sda] Attached SCSI disk ... snip ... [ 76.687067] mesh_abort((ptrval)) [ 76.743606] mesh: state at (ptrval), regs at (ptrval), dma at (ptrval) [ 76.810798] ct=6000 seq=86 bs=4017 fc= 0 exc= 0 err= 0 im= 7 int= 0 sp=85 [ 76.880720] dma stat=84e0 cmdptr=1f73d000 [ 76.941387] phase=4 msgphase=0 conn_tgt=0 data_ptr=24576 [ 77.005567] dma_st=1 dma_ct=0 n_msgout=0 [ 77.065456] target 0: req=(ptrval) goes_out=0 saved_ptr=0 [ 77.130512] mesh_abort((ptrval)) [ 77.187670] mesh: state at (ptrval), regs at (ptrval), dma at (ptrval) [ 77.255594] ct=6000 seq=86 bs=4017 fc= 0 exc= 0 err= 0 im= 7 int= 0 sp=85 [ 77.325778] dma stat=84e0 cmdptr=1f73d000 [ 77.387239] phase=4 msgphase=0 conn_tgt=0 data_ptr=24576 [ 77.453665] dma_st=1 dma_ct=0 n_msgout=0 [ 77.515900] target 0: req=(ptrval) goes_out=0 saved_ptr=0 [ 77.582902] mesh_host_reset [ 88.187083] Kernel panic - not syncing: mesh: double DMA start ! [ 88.254510] CPU: 0 PID: 358 Comm: scsi_eh_0 Not tainted 5.6.13-pmac #1 [ 88.323302] Call Trace: [ 88.378854] [e16ddc58] [c0027080] panic+0x13c/0x308 (unreliable) [ 88.446221] [e16ddcb8] [c02b2478] mesh_start.part.12+0x130/0x414 [ 88.513298] [e16ddcf8] [c02b2fc8] mesh_queue+0x54/0x70 [ 88.577097] [e16ddd18] [c02a1848] scsi_send_eh_cmnd+0x374/0x384 [ 88.643476] [e16dddc8] [c02a1938] scsi_eh_tur+0x5c/0xb8 [ 88.707878] [e16dddf8] [c02a1ab8] scsi_eh_test_devices+0x124/0x178 [ 88.775663] [e16dde28] [c02a2094] scsi_eh_ready_devs+0x588/0x8a8 [ 88.843124] [e16dde98] [c02a31d8] scsi_error_handler+0x344/0x520 [ 88.910697] [e16ddf08] [c00409c8] kthread+0xe4/0xe8 [ 88.975166] [e16ddf38] [c000f234] ret_from_kernel_thread+0x14/0x1c [ 89.044112] Rebooting in 180 seconds.. In theory, a panic can happen after a bus or host reset with dma_started flag set. Fix this by halting the DMA before reinitializing the host. Don't assume that ms->current_req is set when halt_dma() is invoked as it may not hold for bus or host reset. BTW, this particular Conner drive can be made to work by inhibiting disconnect/reselect with 'mesh.resel_targets=0'. Link: https://lore.kernel.org/r/3952bc691e150a7128b29120999b6092071b039a.1595460351.git.fthain@telegraphics.com.au Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: Paul Mackerras <paulus@ozlabs.org> Reported-and-tested-by:
Stan Johnson <userm57@yahoo.com> Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
-
Colin Ian King authored
The variable 'res' is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Link: https://lore.kernel.org/r/20200722154404.959267-1-colin.king@canonical.comReviewed-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
Luo Jiaxing authored
libata currently attempts to reset even if the SATA disk is unplugged. To avoid the meaningless reset of a missing disk, libsas should report offline status to libata. libata already provides a .prereset callback for this purpose. This is called by ata_eh_reset() and can be used to influence whether a reset attempt should be made. Add sas_ata_preset callback to check status of phy and disk. If the disk is already offline or phy is disabled, we return -ENOENT to libata to avoid the reset. Link: https://lore.kernel.org/r/1595408643-63011-3-git-send-email-luojiaxing@huawei.comReviewed-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by:
-
Luo Jiaxing authored
sas_sata_ops uses ata_std_postreset as .postreset callback. However, ata_std_postreset() calls sata_scr_read()/sata_scr_write() which need to access the ATA SCR register. This register not available in the libsas case and the functions always return -EOPNOTSUPP. Drop the .postreset callback. Link: https://lore.kernel.org/r/1595408643-63011-2-git-send-email-luojiaxing@huawei.comReviewed-by:
-
Guenter Roeck authored
Since commit 317aeb83 ("scsi: lpfc: Add blk_io_poll support for latency improvment"), the lpfc driver depends on CPUFREQ. Without it, builds fail with drivers/scsi/lpfc/lpfc_sli.c: In function 'lpfc_init_idle_stat_hb': drivers/scsi/lpfc/lpfc_sli.c:7329:26: error: implicit declaration of function 'get_cpu_idle_time' Add the missing dependency. Link: https://lore.kernel.org/r/20200722023027.36866-1-linux@roeck-us.net Fixes: 317aeb83 ("scsi: lpfc: Add blk_io_poll support for latency improvment") Cc: Dick Kennedy <dick.kennedy@broadcom.com> Cc: James Smart <jsmart2021@gmail.com> Reviewed-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Liao Pingfang authored
Remove superfluous breaks, as there is a "return" before them. Link: https://lore.kernel.org/r/1594724371-11677-1-git-send-email-wang.yi59@zte.com.cnSigned-off-by:
Liao Pingfang <liao.pingfang@zte.com.cn> Signed-off-by:
Yi Wang <wang.yi59@zte.com.cn> Signed-off-by:
-
Liao Pingfang authored
Remove superfluous breaks, as there is a "return" before them. Link: https://lore.kernel.org/r/1594724367-11593-1-git-send-email-wang.yi59@zte.com.cnSigned-off-by:
-
Alan Stern authored
Commit 05d18ae1 ("scsi: pm: Balance pm_only counter of request queue during system resume") fixed a problem in the block layer's runtime-PM code: blk_set_runtime_active() failed to call blk_clear_pm_only(). However, the commit's implementation was awkward; it forced the SCSI system-resume handler to choose whether to call blk_post_runtime_resume() or blk_set_runtime_active(), depending on whether or not the SCSI device had previously been runtime suspended. This patch simplifies the situation considerably by adding the missing function call directly into blk_set_runtime_active() (under the condition that the queue is not already in the RPM_ACTIVE state). This allows the SCSI routine to revert back to its original form. Furthermore, making this change reveals that blk_post_runtime_resume() (in its success pathway) does exactly the same thing as blk_set_runtime_active(). The duplicate code is easily removed by making one routine call the other. No functional changes are intended. Link: https://lore.kernel.org/r/20200706151436.GA702867@rowland.harvard.edu CC: Can Guo <cang@codeaurora.org> CC: Bart Van Assche <bvanassche@acm.org> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Eric Biggers authored
Add support for Qualcomm Inline Crypto Engine (ICE) to ufs-qcom. The standards-compliant parts, such as querying the crypto capabilities and enabling crypto for individual UFS requests, are already handled by ufshcd-crypto.c, which itself is wired into the blk-crypto framework. However, ICE requires vendor-specific init, enable, and resume logic, and it requires that keys be programmed and evicted by vendor-specific SMC calls. Make the ufs-qcom driver handle these details. I tested this on Dragonboard 845c, which is a publicly available development board that uses the Snapdragon 845 SoC and runs the upstream Linux kernel. This is the same SoC used in the Pixel 3 and Pixel 3 XL phones. This testing included (among other things) verifying that the expected ciphertext was produced, both manually using ext4 encryption and automatically using a block layer self-test I've written. I've also tested that this driver works nearly as-is on the Snapdragon 765 and Snapdragon 865 SoCs. And others have tested it on Snapdragon 850, Snapdragon 855, and Snapdragon 865 (see the Tested-by tags). This is based very loosely on the vendor-provided driver in the kernel source code for the Pixel 3, but I've greatly simplified it. Also, for now I've only included support for major version 3 of ICE, since that's all I have the hardware to test with the mainline kernel. Plus it appears that version 3 is easier to use than older versions of ICE. For now, only allow using AES-256-XTS. The hardware also declares support for AES-128-XTS, AES-{128,256}-ECB, and AES-{128,256}-CBC (BitLocker variant). But none of these others are really useful, and they'd need to be individually tested to be sure they worked properly. This commit also changes the name of the loadable module from "ufs-qcom" to "ufs_qcom", as this is necessary to compile it from multiple source files (unless we were to rename ufs-qcom.c). Link: https://lore.kernel.org/r/20200710072013.177481-6-ebiggers@kernel.org Tested-by: Steev Klimaszewski <steev@kali.org> # Lenovo Yoga C630 Tested-by: Thara Gopinath <thara.gopinath@linaro.org> # db845c, sm8150-mtp, sm8250-mtp Reviewed-by:Avri Altman <avri.altman@wdc.com> Acked-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Eric Biggers authored
On Snapdragon SoCs, the Linux kernel isn't permitted to directly access the standard UFS crypto configuration registers. Instead, programming and evicting keys must be done through vendor-specific SMC calls. To support this hardware, add a ->program_key() method to 'struct ufs_hba_variant_ops'. This allows overriding the UFS standard key programming / eviction procedure. Link: https://lore.kernel.org/r/20200710072013.177481-5-ebiggers@kernel.orgReviewed-by:
-
Eric Biggers authored
In preparation for adding another optional register range to the ufs-qcom driver, name the existing optional register range "dev_ref_clk_ctrl_mem". This allows the driver to refer to the optional register ranges by name rather than index. No device-tree files actually have to be updated due to this change, since none of them actually declares these registers. Link: https://lore.kernel.org/r/20200710072013.177481-3-ebiggers@kernel.orgReviewed-by:
-
Eric Biggers authored
Add support for the Inline Crypto Engine (ICE) key programming interface that's needed for the ufs-qcom driver to use inline encryption on Snapdragon SoCs. This interface consists of two SCM calls: one to program a key into a keyslot, and one to invalidate a keyslot. Although the UFS specification defines a standard way to do this, on these SoCs the Linux kernel isn't permitted to access the needed crypto configuration registers directly; these SCM calls must be used instead. Link: https://lore.kernel.org/r/20200710072013.177481-2-ebiggers@kernel.orgAcked-by:
-
Hannes Reinecke authored
ahd_linux_queue_abort_cmd() calls ahd_save_modes() without calling ahd_restore_modes() before exiting. Link: https://lore.kernel.org/r/20200714160301.4482-1-hare@suse.deSigned-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Tomas Henzl authored
To avoid a warning in free_irq, clear the affinity hint. Link: https://lore.kernel.org/r/20200709133144.8363-1-thenzl@redhat.com Fixes: f0b9e7bd ("scsi: megaraid_sas: Set affinity for high IOPS reply queues") Acked-by:
Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
-
Don Brace authored
Link: https://lore.kernel.org/r/159528198909.24772.9189002306398058371.stgit@brunhildaReviewed-by:
Gerry Morong <gerry.morong@microsemi.com> Signed-off-by:
Don Brace <don.brace@microsemi.com> Signed-off-by:
-
Don Brace authored
The controller can become slow to respond to SCSI INQUIRY requests resulting in the SCSI midlayer offlining the controller device. Increase the timeout value for commands sent to the controller device. Link: https://lore.kernel.org/r/159528198335.24772.7963614374905470122.stgit@brunhildaReviewed-by:
Scott Teel <scott.teel@microsemi.com> Reviewed-by:
Scott Benesh <scott.benesh@microsemi.com> Reviewed-by:
Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by:
-
Don Brace authored
Increase queue_depth for PTRAID devices to improve performance. Link: https://lore.kernel.org/r/159528197765.24772.15623281371636788406.stgit@brunhildaReviewed-by:
-
Don Brace authored
There are some rare conditions where a spare is first in the device list causing an array out-of-bounds condition. Link: https://lore.kernel.org/r/159528197176.24772.14659026352708896249.stgit@brunhildaReviewed-by:
-
Randy Dunlap authored
Drop the repeated word "the" in a comment. Link: https://lore.kernel.org/r/20200719003232.21301-1-rdunlap@infradead.org Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Xiongfeng Wang authored
Add newline when formatting SAS transport class phy 'enable' attribute. [root@localhost ~]# cat /sys/devices/pci0000:00/0000:00:0d.0/0000:0f:00.0/host3/phy-3:2/sas_phy/phy-3:2/enable 1[root@localhost ~]# Link: https://lore.kernel.org/r/1594975472-12486-1-git-send-email-wangxiongfeng2@huawei.comReviewed-by:
Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by:
-
Johannes Thumshirn authored
Don't clamp the maximum number of zone append sectors to the maximum number of hardware sectors in sd as the block layer is already enforcing this limit when setting max_zone_append_sectors. Link: https://lore.kernel.org/r/20200716091606.38316-1-johannes.thumshirn@wdc.comReviewed-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
-
- 15 Jul, 2020 17 commits
-
-
Lee Jones authored
'amount_xferred' is used, but only in certain circumstances. Place the same stipulations on the defining/allocating of 'amount_xferred' as is placed when using it. We've been careful not to change any of the ordering semantics here. Fixes the following W=1 kernel build warning(s): drivers/scsi/aic7xxx/aic79xx_osm.c: In function ‘ahd_done’: drivers/scsi/aic7xxx/aic79xx_osm.c:1796:12: warning: variable ‘amount_xferred’ set but not used [-Wunused-but-set-variable] Link: https://lore.kernel.org/r/20200713080001.128044-24-lee.jones@linaro.org Cc: Hannes Reinecke <hare@suse.com> Reviewed-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Lee Jones authored
It looks like they have never actually been used. Fixes the following W=1 kernel build warning(s): drivers/scsi/aic7xxx/aic79xx_osm.c: In function ‘ahd_linux_dev_reset’: drivers/scsi/aic7xxx/aic79xx_osm.c:782:9: warning: variable ‘wait’ set but not used [-Wunused-but-set-variable] drivers/scsi/aic7xxx/aic79xx_osm.c:781:9: warning: variable ‘paused’ set but not used [-Wunused-but-set-variable] Link: https://lore.kernel.org/r/20200713080001.128044-23-lee.jones@linaro.org Cc: Hannes Reinecke <hare@suse.com> Reviewed-by:
-
Lee Jones authored
Hasn't been used since 2005. Fixes the following W=1 kernel build warning(s): drivers/scsi/aic7xxx/aic79xx_osm.c: In function ‘ahd_linux_slave_configure’: drivers/scsi/aic7xxx/aic79xx_osm.c:703:20: warning: variable ‘ahd’ set but not used [-Wunused-but-set-variable] Link: https://lore.kernel.org/r/20200713080001.128044-22-lee.jones@linaro.org Cc: Hannes Reinecke <hare@suse.com> Reviewed-by:
-
Lee Jones authored
Either due to API slippage before the driver was mainlined or copy/paste errors. Fixes the following W=1 kernel build warning(s): drivers/scsi/lpfc/lpfc_nvme.c:254: warning: Function parameter or member 'pnvme_lport' not described in 'lpfc_nvme_create_queue' drivers/scsi/lpfc/lpfc_nvme.c:254: warning: Function parameter or member 'qsize' not described in 'lpfc_nvme_create_queue' drivers/scsi/lpfc/lpfc_nvme.c:254: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_create_queue' drivers/scsi/lpfc/lpfc_nvme.c:311: warning: Function parameter or member 'pnvme_lport' not described in 'lpfc_nvme_delete_queue' drivers/scsi/lpfc/lpfc_nvme.c:311: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_delete_queue' drivers/scsi/lpfc/lpfc_nvme.c:689: warning: Function parameter or member 'gen_req_cmp' not described in '__lpfc_nvme_ls_req' drivers/scsi/lpfc/lpfc_nvme.c:801: warning: Function parameter or member 'pnvme_lport' not described in 'lpfc_nvme_ls_req' drivers/scsi/lpfc/lpfc_nvme.c:801: warning: Function parameter or member 'pnvme_rport' not described in 'lpfc_nvme_ls_req' drivers/scsi/lpfc/lpfc_nvme.c:801: warning: Function parameter or member 'pnvme_lsreq' not described in 'lpfc_nvme_ls_req' drivers/scsi/lpfc/lpfc_nvme.c:801: warning: Excess function parameter 'lpfc_nvme_lport' description in 'lpfc_nvme_ls_req' drivers/scsi/lpfc/lpfc_nvme.c:801: warning: Excess function parameter 'lpfc_nvme_rport' description in 'lpfc_nvme_ls_req' drivers/scsi/lpfc/lpfc_nvme.c:937: warning: Function parameter or member 'pnvme_lport' not described in 'lpfc_nvme_ls_abort' drivers/scsi/lpfc/lpfc_nvme.c:937: warning: Function parameter or member 'pnvme_rport' not described in 'lpfc_nvme_ls_abort' drivers/scsi/lpfc/lpfc_nvme.c:937: warning: Function parameter or member 'pnvme_lsreq' not described in 'lpfc_nvme_ls_abort' drivers/scsi/lpfc/lpfc_nvme.c:937: warning: Excess function parameter 'lpfc_nvme_lport' description in 'lpfc_nvme_ls_abort' drivers/scsi/lpfc/lpfc_nvme.c:937: warning: Excess function parameter 'lpfc_nvme_rport' description in 'lpfc_nvme_ls_abort' drivers/scsi/lpfc/lpfc_nvme.c:1075: warning: Function parameter or member 'phba' not described in 'lpfc_nvme_io_cmd_wqe_cmpl' drivers/scsi/lpfc/lpfc_nvme.c:1075: warning: Function parameter or member 'pwqeIn' not described in 'lpfc_nvme_io_cmd_wqe_cmpl' drivers/scsi/lpfc/lpfc_nvme.c:1075: warning: Function parameter or member 'wcqe' not described in 'lpfc_nvme_io_cmd_wqe_cmpl' drivers/scsi/lpfc/lpfc_nvme.c:1075: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_io_cmd_wqe_cmpl' drivers/scsi/lpfc/lpfc_nvme.c:1075: warning: Excess function parameter 'lpfc_nvme_lport' description in 'lpfc_nvme_io_cmd_wqe_cmpl' drivers/scsi/lpfc/lpfc_nvme.c:1075: warning: Excess function parameter 'lpfc_nvme_rport' description in 'lpfc_nvme_io_cmd_wqe_cmpl' drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Function parameter or member 'vport' not described in 'lpfc_nvme_prep_io_cmd' drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Function parameter or member 'lpfc_ncmd' not described in 'lpfc_nvme_prep_io_cmd' drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Function parameter or member 'pnode' not described in 'lpfc_nvme_prep_io_cmd' drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Function parameter or member 'cstat' not described in 'lpfc_nvme_prep_io_cmd' drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_prep_io_cmd' drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Excess function parameter 'lpfc_nvme_lport' description in 'lpfc_nvme_prep_io_cmd' drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Excess function parameter 'lpfc_nvme_rport' description in 'lpfc_nvme_prep_io_cmd' drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Excess function parameter 'lpfc_nvme_fcreq' description in 'lpfc_nvme_prep_io_cmd' drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Excess function parameter 'hw_queue_handle' description in 'lpfc_nvme_prep_io_cmd' drivers/scsi/lpfc/lpfc_nvme.c:1420: warning: Function parameter or member 'vport' not described in 'lpfc_nvme_prep_io_dma' drivers/scsi/lpfc/lpfc_nvme.c:1420: warning: Function parameter or member 'lpfc_ncmd' not described in 'lpfc_nvme_prep_io_dma' drivers/scsi/lpfc/lpfc_nvme.c:1420: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_prep_io_dma' drivers/scsi/lpfc/lpfc_nvme.c:1420: warning: Excess function parameter 'lpfc_nvme_lport' description in 'lpfc_nvme_prep_io_dma' drivers/scsi/lpfc/lpfc_nvme.c:1420: warning: Excess function parameter 'lpfc_nvme_rport' description in 'lpfc_nvme_prep_io_dma' drivers/scsi/lpfc/lpfc_nvme.c:1420: warning: Excess function parameter 'lpfc_nvme_fcreq' description in 'lpfc_nvme_prep_io_dma' drivers/scsi/lpfc/lpfc_nvme.c:1420: warning: Excess function parameter 'hw_queue_handle' description in 'lpfc_nvme_prep_io_dma' drivers/scsi/lpfc/lpfc_nvme.c:1598: warning: bad line: indicated in @lpfc_nvme_rport. drivers/scsi/lpfc/lpfc_nvme.c:1609: warning: Function parameter or member 'pnvme_lport' not described in 'lpfc_nvme_fcp_io_submit' drivers/scsi/lpfc/lpfc_nvme.c:1609: warning: Function parameter or member 'pnvme_rport' not described in 'lpfc_nvme_fcp_io_submit' drivers/scsi/lpfc/lpfc_nvme.c:1609: warning: Function parameter or member 'pnvme_fcreq' not described in 'lpfc_nvme_fcp_io_submit' drivers/scsi/lpfc/lpfc_nvme.c:1609: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_fcp_io_submit' drivers/scsi/lpfc/lpfc_nvme.c:1609: warning: Excess function parameter 'lpfc_nvme_lport' description in 'lpfc_nvme_fcp_io_submit' drivers/scsi/lpfc/lpfc_nvme.c:1609: warning: Excess function parameter 'lpfc_nvme_rport' description in 'lpfc_nvme_fcp_io_submit' drivers/scsi/lpfc/lpfc_nvme.c:1609: warning: Excess function parameter 'lpfc_nvme_fcreq' description in 'lpfc_nvme_fcp_io_submit' drivers/scsi/lpfc/lpfc_nvme.c:1856: warning: Function parameter or member 'abts_cmpl' not described in 'lpfc_nvme_abort_fcreq_cmpl' drivers/scsi/lpfc/lpfc_nvme.c:1856: warning: Excess function parameter 'rspiocb' description in 'lpfc_nvme_abort_fcreq_cmpl' drivers/scsi/lpfc/lpfc_nvme.c:1892: warning: Function parameter or member 'pnvme_lport' not described in 'lpfc_nvme_fcp_abort' drivers/scsi/lpfc/lpfc_nvme.c:1892: warning: Function parameter or member 'pnvme_rport' not described in 'lpfc_nvme_fcp_abort' drivers/scsi/lpfc/lpfc_nvme.c:1892: warning: Function parameter or member 'pnvme_fcreq' not described in 'lpfc_nvme_fcp_abort' drivers/scsi/lpfc/lpfc_nvme.c:1892: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_fcp_abort' drivers/scsi/lpfc/lpfc_nvme.c:1892: warning: Excess function parameter 'lpfc_nvme_lport' description in 'lpfc_nvme_fcp_abort' drivers/scsi/lpfc/lpfc_nvme.c:1892: warning: Excess function parameter 'lpfc_nvme_rport' description in 'lpfc_nvme_fcp_abort' drivers/scsi/lpfc/lpfc_nvme.c:1892: warning: Excess function parameter 'lpfc_nvme_fcreq' description in 'lpfc_nvme_fcp_abort' drivers/scsi/lpfc/lpfc_nvme.c:2093: warning: Function parameter or member 'ndlp' not described in 'lpfc_get_nvme_buf' drivers/scsi/lpfc/lpfc_nvme.c:2093: warning: Function parameter or member 'idx' not described in 'lpfc_get_nvme_buf' drivers/scsi/lpfc/lpfc_nvme.c:2093: warning: Function parameter or member 'expedite' not described in 'lpfc_get_nvme_buf' drivers/scsi/lpfc/lpfc_nvme.c:2197: warning: Function parameter or member 'vport' not described in 'lpfc_nvme_create_localport' drivers/scsi/lpfc/lpfc_nvme.c:2330: warning: Function parameter or member 'vport' not described in 'lpfc_nvme_destroy_localport' drivers/scsi/lpfc/lpfc_nvme.c:2330: warning: Excess function parameter 'pnvme' description in 'lpfc_nvme_destroy_localport' drivers/scsi/lpfc/lpfc_nvme.c:2543: warning: Function parameter or member 'vport' not described in 'lpfc_nvme_rescan_port' drivers/scsi/lpfc/lpfc_nvme.c:2543: warning: Function parameter or member 'ndlp' not described in 'lpfc_nvme_rescan_port' Link: https://lore.kernel.org/r/20200713080001.128044-21-lee.jones@linaro.org Cc: James Smart <james.smart@broadcom.com> Cc: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
-
Lee Jones authored
Also promote fully documented function header to kerneldoc. Fixes the following W=1 kernel build warning(s): drivers/scsi/be2iscsi/be_mgmt.c:112: warning: Function parameter or member 'phba' not described in 'mgmt_open_connection' Link: https://lore.kernel.org/r/20200713080001.128044-20-lee.jones@linaro.org Cc: Subbu Seetharaman <subbu.seetharaman@broadcom.com> Cc: Ketan Mukadam <ketan.mukadam@broadcom.com> Cc: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Cc: linux-drivers@broadcom.com Signed-off-by:
-
Lee Jones authored
Also demote unintentional kerneldoc header. Fixes the following W=1 kernel build warning(s): drivers/scsi/be2iscsi/be_main.c:986: warning: Function parameter or member 'pcontext' not described in 'alloc_wrb_handle' drivers/scsi/be2iscsi/be_main.c:986: warning: Excess function parameter 'pwrb_context' description in 'alloc_wrb_handle' drivers/scsi/be2iscsi/be_main.c:1409: warning: Function parameter or member 'beiscsi_conn' not described in 'beiscsi_complete_pdu' drivers/scsi/be2iscsi/be_main.c:1409: warning: Function parameter or member 'phdr' not described in 'beiscsi_complete_pdu' drivers/scsi/be2iscsi/be_main.c:1409: warning: Function parameter or member 'pdata' not described in 'beiscsi_complete_pdu' drivers/scsi/be2iscsi/be_main.c:1409: warning: Function parameter or member 'dlen' not described in 'beiscsi_complete_pdu' Link: https://lore.kernel.org/r/20200713080001.128044-19-lee.jones@linaro.org Cc: Subbu Seetharaman <subbu.seetharaman@broadcom.com> Cc: Ketan Mukadam <ketan.mukadam@broadcom.com> Cc: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Cc: linux-drivers@broadcom.com Signed-off-by:
-
Lee Jones authored
And add descriptions for a couple of missing function parameters. Fixes the following W=1 kernel build warning(s): drivers/scsi/be2iscsi/be_iscsi.c:38: warning: Function parameter or member 'ep' not described in 'beiscsi_session_create' drivers/scsi/be2iscsi/be_iscsi.c:173: warning: Function parameter or member 'is_leading' not described in 'beiscsi_conn_bind' drivers/scsi/be2iscsi/be_iscsi.c:998: warning: Function parameter or member 'beiscsi_ep' not described in 'beiscsi_free_ep' drivers/scsi/be2iscsi/be_iscsi.c:998: warning: Excess function parameter 'ep' description in 'beiscsi_free_ep' drivers/scsi/be2iscsi/be_iscsi.c:1039: warning: Function parameter or member 'non_blocking' not described in 'beiscsi_open_conn' drivers/scsi/be2iscsi/be_iscsi.c:1135: warning: Function parameter or member 'shost' not described in 'beiscsi_ep_connect' drivers/scsi/be2iscsi/be_iscsi.c:1135: warning: Excess function parameter 'scsi_host' description in 'beiscsi_ep_connect' drivers/scsi/be2iscsi/be_iscsi.c:1236: warning: Function parameter or member 'beiscsi_ep' not described in 'beiscsi_conn_close' drivers/scsi/be2iscsi/be_iscsi.c:1236: warning: Excess function parameter 'ep' description in 'beiscsi_conn_close' Link: https://lore.kernel.org/r/20200713080001.128044-18-lee.jones@linaro.org Cc: Subbu Seetharaman <subbu.seetharaman@broadcom.com> Cc: Ketan Mukadam <ketan.mukadam@broadcom.com> Cc: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Cc: linux-drivers@broadcom.com Signed-off-by:
-
Lee Jones authored
No attempt has been made to document any of the demoted functions here. Fixes the following W=1 kernel build warning(s): drivers/scsi/myrs.c:94: warning: Function parameter or member 'cmd_blk' not described in 'myrs_reset_cmd' drivers/scsi/myrs.c:105: warning: Function parameter or member 'cs' not described in 'myrs_qcmd' drivers/scsi/myrs.c:105: warning: Function parameter or member 'cmd_blk' not described in 'myrs_qcmd' drivers/scsi/myrs.c:130: warning: Function parameter or member 'cs' not described in 'myrs_exec_cmd' drivers/scsi/myrs.c:130: warning: Function parameter or member 'cmd_blk' not described in 'myrs_exec_cmd' drivers/scsi/myrs.c:149: warning: Function parameter or member 'cs' not described in 'myrs_report_progress' drivers/scsi/myrs.c:149: warning: Function parameter or member 'ldev_num' not described in 'myrs_report_progress' drivers/scsi/myrs.c:149: warning: Function parameter or member 'msg' not described in 'myrs_report_progress' drivers/scsi/myrs.c:149: warning: Function parameter or member 'blocks' not described in 'myrs_report_progress' drivers/scsi/myrs.c:149: warning: Function parameter or member 'size' not described in 'myrs_report_progress' drivers/scsi/myrs.c:160: warning: Function parameter or member 'cs' not described in 'myrs_get_ctlr_info' drivers/scsi/myrs.c:222: warning: Function parameter or member 'cs' not described in 'myrs_get_ldev_info' drivers/scsi/myrs.c:222: warning: Function parameter or member 'ldev_num' not described in 'myrs_get_ldev_info' drivers/scsi/myrs.c:222: warning: Function parameter or member 'ldev_info' not described in 'myrs_get_ldev_info' drivers/scsi/myrs.c:310: warning: Function parameter or member 'cs' not described in 'myrs_get_pdev_info' drivers/scsi/myrs.c:310: warning: Function parameter or member 'channel' not described in 'myrs_get_pdev_info' drivers/scsi/myrs.c:310: warning: Function parameter or member 'target' not described in 'myrs_get_pdev_info' drivers/scsi/myrs.c:310: warning: Function parameter or member 'lun' not described in 'myrs_get_pdev_info' drivers/scsi/myrs.c:310: warning: Function parameter or member 'pdev_info' not described in 'myrs_get_pdev_info' drivers/scsi/myrs.c:353: warning: Function parameter or member 'cs' not described in 'myrs_dev_op' drivers/scsi/myrs.c:353: warning: Function parameter or member 'opcode' not described in 'myrs_dev_op' drivers/scsi/myrs.c:353: warning: Function parameter or member 'opdev' not described in 'myrs_dev_op' drivers/scsi/myrs.c:379: warning: Function parameter or member 'cs' not described in 'myrs_translate_pdev' drivers/scsi/myrs.c:379: warning: Function parameter or member 'channel' not described in 'myrs_translate_pdev' drivers/scsi/myrs.c:379: warning: Function parameter or member 'target' not described in 'myrs_translate_pdev' drivers/scsi/myrs.c:379: warning: Function parameter or member 'lun' not described in 'myrs_translate_pdev' drivers/scsi/myrs.c:379: warning: Function parameter or member 'devmap' not described in 'myrs_translate_pdev' drivers/scsi/myrs.c:422: warning: Function parameter or member 'cs' not described in 'myrs_get_event' drivers/scsi/myrs.c:422: warning: Function parameter or member 'event_num' not described in 'myrs_get_event' drivers/scsi/myrs.c:422: warning: Function parameter or member 'event_buf' not described in 'myrs_get_event' drivers/scsi/myrs.c:484: warning: Function parameter or member 'cs' not described in 'myrs_enable_mmio_mbox' drivers/scsi/myrs.c:484: warning: Function parameter or member 'enable_mbox_fn' not described in 'myrs_enable_mmio_mbox' drivers/scsi/myrs.c:584: warning: Function parameter or member 'cs' not described in 'myrs_get_config' drivers/scsi/myrs.c:688: warning: cannot understand function prototype: 'struct ' drivers/scsi/myrs.c:1967: warning: Function parameter or member 'dev' not described in 'myrs_is_raid' drivers/scsi/myrs.c:1980: warning: Function parameter or member 'dev' not described in 'myrs_get_resync' drivers/scsi/myrs.c:2005: warning: Function parameter or member 'dev' not described in 'myrs_get_state' drivers/scsi/myrs.c:2343: warning: bad line: the Error Status Register when the driver performs the BIOS handshaking. drivers/scsi/myrs.c:2344: warning: bad line: It returns true for fatal errors and false otherwise. drivers/scsi/myrs.c:2349: warning: Function parameter or member 'cs' not described in 'myrs_err_status' drivers/scsi/myrs.c:2349: warning: Function parameter or member 'status' not described in 'myrs_err_status' drivers/scsi/myrs.c:2349: warning: Function parameter or member 'parm0' not described in 'myrs_err_status' drivers/scsi/myrs.c:2349: warning: Function parameter or member 'parm1' not described in 'myrs_err_status' Link: https://lore.kernel.org/r/20200713080001.128044-16-lee.jones@linaro.org Cc: Hannes Reinecke <hare@kernel.org> Cc: Linux GmbH <hare@suse.com> Cc: "Leonard N. Zubkoff" <lnz@dandelion.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/ipr.h:1687:1: warning: alignment 1 of ‘struct ipr_dump_location_entry’ is less than 4 [-Wpacked-not-aligned] 1687 | }__attribute__((packed)); | ^ drivers/scsi/ipr.h:1711:1: warning: alignment 1 of ‘struct ipr_driver_dump’ is less than 4 [-Wpacked-not-aligned] 1711 | }__attribute__((packed)); | ^ Link: https://lore.kernel.org/r/20200713080001.128044-15-lee.jones@linaro.org Cc: Brian King <brking@us.ibm.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): In file included from drivers/scsi/ipr.c:73: drivers/scsi/ipr.c: In function ‘ipr_mask_and_clear_interrupts’: drivers/scsi/ipr.c:740:15: warning: variable ‘int_reg’ set but not used [-Wunused-but-set-variable] drivers/scsi/ipr.c: In function ‘ipr_cancel_op’: drivers/scsi/ipr.c:5497:13: warning: variable ‘int_reg’ set but not used [-Wunused-but-set-variable] drivers/scsi/ipr.c: In function ‘ipr_iopoll’: drivers/scsi/ipr.c:5765:22: warning: variable ‘ioa_cfg’ set but not used [-Wunused-but-set-variable] drivers/scsi/ipr.c: In function ‘ipr_reset_restore_cfg_space’: drivers/scsi/ipr.c:8662:6: warning: variable ‘int_reg’ set but not used [-Wunused-but-set-variable] drivers/scsi/ipr.c: In function ‘ipr_test_msi’: Link: https://lore.kernel.org/r/20200713080001.128044-14-lee.jones@linaro.org Cc: Brian King <brking@us.ibm.com> Signed-off-by:
-
Lee Jones authored
This is the only use of kerneldoc in the sourcefile and no descriptions are provided. Fixes the following W=1 kernel build warning(s): drivers/scsi/virtio_scsi.c:109: warning: Function parameter or member 'vscsi' not described in 'virtscsi_complete_cmd' drivers/scsi/virtio_scsi.c:109: warning: Function parameter or member 'buf' not described in 'virtscsi_complete_cmd' Link: https://lore.kernel.org/r/20200713080001.128044-13-lee.jones@linaro.org Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: virtualization@lists.linux-foundation.org Acked-by:
Paolo Bonzini <pbonzini@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Lee Jones authored
Mainly misspellings and/or missing function parameter descriptions. Fixes the following W=1 kernel build warning(s): drivers/scsi/ipr.c:10100:15: warning: variable ‘int_reg’ set but not used [-Wunused-but-set-variable] drivers/scsi/ipr.c:679: warning: Function parameter or member 'fast_done' not described in 'ipr_init_ipr_cmnd' drivers/scsi/ipr.c:697: warning: Function parameter or member 'hrrq' not described in '__ipr_get_free_ipr_cmnd' drivers/scsi/ipr.c:697: warning: Excess function parameter 'ioa_cfg' description in '__ipr_get_free_ipr_cmnd' drivers/scsi/ipr.c:1297: warning: Function parameter or member 'buffer' not described in '__ipr_format_res_path' drivers/scsi/ipr.c:1297: warning: Excess function parameter 'buf' description in '__ipr_format_res_path' drivers/scsi/ipr.c:1321: warning: Function parameter or member 'buffer' not described in 'ipr_format_res_path' drivers/scsi/ipr.c:1321: warning: Excess function parameter 'buf' description in 'ipr_format_res_path' drivers/scsi/ipr.c:1400: warning: Excess function parameter 'cfgtew' description in 'ipr_clear_res_target' drivers/scsi/ipr.c:2679: warning: Function parameter or member 't' not described in 'ipr_timeout' drivers/scsi/ipr.c:2679: warning: Excess function parameter 'ipr_cmd' description in 'ipr_timeout' drivers/scsi/ipr.c:2712: warning: Function parameter or member 't' not described in 'ipr_oper_timeout' drivers/scsi/ipr.c:2712: warning: Excess function parameter 'ipr_cmd' description in 'ipr_oper_timeout' drivers/scsi/ipr.c:3494: warning: Function parameter or member 'attr' not described in 'ipr_show_fw_version' drivers/scsi/ipr.c:3528: warning: Function parameter or member 'attr' not described in 'ipr_show_log_level' drivers/scsi/ipr.c:3551: warning: Function parameter or member 'attr' not described in 'ipr_store_log_level' drivers/scsi/ipr.c:3551: warning: Function parameter or member 'count' not described in 'ipr_store_log_level' drivers/scsi/ipr.c:3586: warning: Function parameter or member 'attr' not described in 'ipr_store_diagnostics' drivers/scsi/ipr.c:3642: warning: Function parameter or member 'dev' not described in 'ipr_show_adapter_state' drivers/scsi/ipr.c:3642: warning: Function parameter or member 'attr' not described in 'ipr_show_adapter_state' drivers/scsi/ipr.c:3642: warning: Excess function parameter 'class_dev' description in 'ipr_show_adapter_state' drivers/scsi/ipr.c:3671: warning: Function parameter or member 'attr' not described in 'ipr_store_adapter_state' drivers/scsi/ipr.c:3722: warning: Function parameter or member 'attr' not described in 'ipr_store_reset_adapter' drivers/scsi/ipr.c:3783: warning: Function parameter or member 'attr' not described in 'ipr_store_iopoll_weight' drivers/scsi/ipr.c:3783: warning: Function parameter or member 'count' not described in 'ipr_store_iopoll_weight' drivers/scsi/ipr.c:3883: warning: Function parameter or member 'sglist' not described in 'ipr_free_ucode_buffer' drivers/scsi/ipr.c:3883: warning: Excess function parameter 'p_dnld' description in 'ipr_free_ucode_buffer' drivers/scsi/ipr.c:4074: warning: Function parameter or member 'dev' not described in 'ipr_store_update_fw' drivers/scsi/ipr.c:4074: warning: Function parameter or member 'attr' not described in 'ipr_store_update_fw' drivers/scsi/ipr.c:4074: warning: Excess function parameter 'class_dev' description in 'ipr_store_update_fw' drivers/scsi/ipr.c:4149: warning: Function parameter or member 'attr' not described in 'ipr_show_fw_type' drivers/scsi/ipr.c:4489: warning: Excess function parameter 'reason' description in 'ipr_change_queue_depth' drivers/scsi/ipr.c:4660: warning: Function parameter or member 'attr' not described in 'ipr_show_raw_mode' drivers/scsi/ipr.c:4688: warning: Function parameter or member 'attr' not described in 'ipr_store_raw_mode' drivers/scsi/ipr.c:4688: warning: Function parameter or member 'count' not described in 'ipr_store_raw_mode' drivers/scsi/ipr.c:5069: warning: Function parameter or member 'ipr_cmd' not described in 'ipr_cmnd_is_free' drivers/scsi/ipr.c:5108: warning: Function parameter or member 'ioa_cfg' not described in 'ipr_wait_for_ops' drivers/scsi/ipr.c:5108: warning: Excess function parameter 'ipr_cmd' description in 'ipr_wait_for_ops' drivers/scsi/ipr.c:5272: warning: Function parameter or member 'deadline' not described in 'ipr_sata_reset' drivers/scsi/ipr.c:5453: warning: Function parameter or member 't' not described in 'ipr_abort_timeout' drivers/scsi/ipr.c:5453: warning: Excess function parameter 'ipr_cmd' description in 'ipr_abort_timeout' drivers/scsi/ipr.c:5578: warning: Function parameter or member 'shost' not described in 'ipr_scan_finished' drivers/scsi/ipr.c:5578: warning: Function parameter or member 'elapsed_time' not described in 'ipr_scan_finished' drivers/scsi/ipr.c:5578: warning: Excess function parameter 'scsi_cmd' description in 'ipr_scan_finished' drivers/scsi/ipr.c:5704: warning: Function parameter or member 'number' not described in 'ipr_isr_eh' drivers/scsi/ipr.c:6278: warning: Function parameter or member 'ipr_cmd' not described in 'ipr_gen_sense' drivers/scsi/ipr.c:6278: warning: Excess function parameter 'ioasa' description in 'ipr_gen_sense' drivers/scsi/ipr.c:6278: warning: Excess function parameter 'sense_buf' description in 'ipr_gen_sense' drivers/scsi/ipr.c:6711: warning: Function parameter or member 'host' not described in 'ipr_ioa_info' drivers/scsi/ipr.c:6711: warning: Excess function parameter 'scsi_host' description in 'ipr_ioa_info' drivers/scsi/ipr.c:7606: warning: Function parameter or member 'res_handle' not described in 'ipr_build_mode_sense' drivers/scsi/ipr.c:7606: warning: Excess function parameter 'res' description in 'ipr_build_mode_sense' drivers/scsi/ipr.c:7947: warning: Function parameter or member 'ipr_cmd' not described in 'ipr_ioafp_set_caching_parameters' drivers/scsi/ipr.c:7986: warning: Function parameter or member 'flags' not described in 'ipr_ioafp_inquiry' drivers/scsi/ipr.c:7986: warning: Function parameter or member 'page' not described in 'ipr_ioafp_inquiry' drivers/scsi/ipr.c:7986: warning: Function parameter or member 'dma_addr' not described in 'ipr_ioafp_inquiry' drivers/scsi/ipr.c:7986: warning: Function parameter or member 'xfer_len' not described in 'ipr_ioafp_inquiry' drivers/scsi/ipr.c:8280: warning: Function parameter or member 't' not described in 'ipr_reset_timer_done' drivers/scsi/ipr.c:8280: warning: Excess function parameter 'ipr_cmd' description in 'ipr_reset_timer_done' drivers/scsi/ipr.c:9486: warning: bad line: drivers/scsi/ipr.c:9609: warning: Function parameter or member 'ioa_cfg' not described in 'ipr_free_all_resources' drivers/scsi/ipr.c:9609: warning: Excess function parameter 'ipr_cmd' description in 'ipr_free_all_resources' drivers/scsi/ipr.c:10071: warning: Function parameter or member 'irq' not described in 'ipr_test_intr' drivers/scsi/ipr.c:10071: warning: Function parameter or member 'devp' not described in 'ipr_test_intr' drivers/scsi/ipr.c:10071: warning: Excess function parameter 'pdev' description in 'ipr_test_intr' drivers/scsi/ipr.c:10098: warning: Function parameter or member 'ioa_cfg' not described in 'ipr_test_msi' drivers/scsi/ipr.c:10538: warning: Function parameter or member 'pdev' not described in 'ipr_probe' drivers/scsi/ipr.c:10538: warning: Function parameter or member 'dev_id' not described in 'ipr_probe' drivers/scsi/ipr.c:10794: warning: Function parameter or member 'ipr_cmd' not described in 'ipr_halt_done' drivers/scsi/ipr.c:10805: warning: Function parameter or member 'nb' not described in 'ipr_halt' drivers/scsi/ipr.c:10805: warning: Function parameter or member 'event' not described in 'ipr_halt' drivers/scsi/ipr.c:10805: warning: Function parameter or member 'buf' not described in 'ipr_halt' Link: https://lore.kernel.org/r/20200713080001.128044-12-lee.jones@linaro.org Cc: Brian King <brking@us.ibm.com> Signed-off-by:
-
Lee Jones authored
... even if they are completely unused. Fixes the following W=1 kernel build warning(s): drivers/scsi/pm8001/pm8001_ctl.c:56: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_mpi_interface_rev_show' drivers/scsi/pm8001/pm8001_ctl.c:81: warning: Function parameter or member 'attr' not described in 'controller_fatal_error_show' drivers/scsi/pm8001/pm8001_ctl.c:100: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_fw_version_show' drivers/scsi/pm8001/pm8001_ctl.c:130: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_ila_version_show' drivers/scsi/pm8001/pm8001_ctl.c:155: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_inactive_fw_version_show' drivers/scsi/pm8001/pm8001_ctl.c:181: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_max_out_io_show' drivers/scsi/pm8001/pm8001_ctl.c:204: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_max_devices_show' drivers/scsi/pm8001/pm8001_ctl.c:230: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_max_sg_list_show' drivers/scsi/pm8001/pm8001_ctl.c:274: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_sas_spec_support_show' drivers/scsi/pm8001/pm8001_ctl.c:303: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_host_sas_address_show' drivers/scsi/pm8001/pm8001_ctl.c:322: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_logging_level_show' drivers/scsi/pm8001/pm8001_ctl.c:355: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_aap_log_show' drivers/scsi/pm8001/pm8001_ctl.c:390: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_ib_queue_log_show' drivers/scsi/pm8001/pm8001_ctl.c:423: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_ob_queue_log_show' drivers/scsi/pm8001/pm8001_ctl.c:454: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_bios_version_show' drivers/scsi/pm8001/pm8001_ctl.c:492: warning: Function parameter or member 'attr' not described in 'event_log_size_show' drivers/scsi/pm8001/pm8001_ctl.c:510: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_iop_log_show' drivers/scsi/pm8001/pm8001_ctl.c:548: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_fatal_log_show' drivers/scsi/pm8001/pm8001_ctl.c:566: warning: Function parameter or member 'attr' not described in 'non_fatal_log_show' drivers/scsi/pm8001/pm8001_ctl.c:609: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_gsm_log_show' Link: https://lore.kernel.org/r/20200713080001.128044-11-lee.jones@linaro.org Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Acked-by:
Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by:
-
Lee Jones authored
... and document aac_rx_ioremap() 'dev' param. Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'p2' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'p3' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'p4' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'p5' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'p6' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'status' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'r1' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'r2' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'r3' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'r4' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Excess function parameter 'ret' description in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:450: warning: Function parameter or member 'dev' not described in 'aac_rx_ioremap' Link: https://lore.kernel.org/r/20200713080001.128044-10-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by:
-
Lee Jones authored
Kerneldoc format should be '@.*: ', else the checker gets confused. Fixes the following W=1 kernel build warning(s): drivers/scsi/aic94xx/aic94xx_scb.c:137: warning: Function parameter or member 'phy' not described in 'asd_get_attached_sas_addr' drivers/scsi/aic94xx/aic94xx_scb.c:137: warning: Function parameter or member 'sas_addr' not described in 'asd_get_attached_sas_addr' drivers/scsi/aic94xx/aic94xx_scb.c:860: warning: Function parameter or member 't' not described in 'asd_ascb_timedout' drivers/scsi/aic94xx/aic94xx_scb.c:860: warning: Excess function parameter 'data' description in 'asd_ascb_timedout' Link: https://lore.kernel.org/r/20200713080001.128044-9-lee.jones@linaro.org Cc: Luben Tuikov <luben_tuikov@adaptec.com> Signed-off-by:
-
Lee Jones authored
Some parameters not documented. Others misspelled. Also, functions must follow directly after the header that documents them. Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/commsup.c:223: warning: Function parameter or member 'scmd' not described in 'aac_fib_alloc_tag' drivers/scsi/aacraid/commsup.c:421: warning: Function parameter or member 'qid' not described in 'aac_queue_get' drivers/scsi/aacraid/commsup.c:421: warning: Function parameter or member 'hw_fib' not described in 'aac_queue_get' drivers/scsi/aacraid/commsup.c:421: warning: Excess function parameter 'priority' description in 'aac_queue_get' drivers/scsi/aacraid/commsup.c:421: warning: Excess function parameter 'fib' description in 'aac_queue_get' drivers/scsi/aacraid/commsup.c:943: warning: Function parameter or member 'fibptr' not described in 'aac_fib_complete' drivers/scsi/aacraid/commsup.c:943: warning: Excess function parameter 'fib' description in 'aac_fib_complete' drivers/scsi/aacraid/commsup.c:1061: warning: Excess function parameter 'dev' description in 'AIF_SNIFF_TIMEOUT' drivers/scsi/aacraid/commsup.c:1061: warning: Excess function parameter 'fibptr' description in 'AIF_SNIFF_TIMEOUT' drivers/scsi/aacraid/commsup.c:2428: warning: Function parameter or member 'data' not described in 'aac_command_thread' drivers/scsi/aacraid/commsup.c:2428: warning: Excess function parameter 'dev' description in 'aac_command_thread' Link: https://lore.kernel.org/r/20200713080001.128044-8-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/aic94xx/aic94xx_seq.c:587: warning: Function parameter or member 'lseq' not described in 'asd_init_lseq_mip' drivers/scsi/aic94xx/aic94xx_seq.c:674: warning: Function parameter or member 'lseq' not described in 'asd_init_lseq_mdp' drivers/scsi/aic94xx/aic94xx_seq.c:958: warning: Function parameter or member 'lseq' not described in 'asd_init_lseq_cio' drivers/scsi/aic94xx/aic94xx_seq.c:1364: warning: Function parameter or member 'asd_ha' not described in 'asd_update_port_links' drivers/scsi/aic94xx/aic94xx_seq.c:1364: warning: Function parameter or member 'phy' not described in 'asd_update_port_links' drivers/scsi/aic94xx/aic94xx_seq.c:1364: warning: Excess function parameter 'sas_phy' description in 'asd_update_port_links' Link: https://lore.kernel.org/r/20200713080001.128044-7-lee.jones@linaro.org Cc: Luben Tuikov <luben_tuikov@adaptec.com> Signed-off-by:
-
